EXTRACTION OF CESIUM NITRATE FROM CONCENTRATED SODIUM NITRATE SOLUTIONS WITH 21-CROWN-7 ETHERS: SELECnVITY AND EQUILIBRIUM MODELING

ABSTRACT

The extraction of cesium nitrate from a high concentration of sodium nitrate by a family of 21-crown-7 ethers in 1,2-dichloroethane has been investigated. Dibenzo-21-crown-7 (DB21C7) and bis[4(5),4′(5′)-rm-butylbenzo]-21-crown-7 (BtBB21C7) ethers have higher selectivity for cesium but lower extraction efficiency than dicyclohexano-21-crown-7 (DC21C7) ether. As measured by the distribution coefficient ratio D_cs/D_Na, the cesium selectivity averaged 78 and 93 for DB21C7 and BtBB21C7, respectively. However, in the case of DC21C7, the cesium selectivity was lower and decreased approximately three-fold from 10 to 3 as cesiüm loading increased. Alkyl substitution on the benzo group has only a small effect on the extraction behavior. It was shown by use of the equilibrium modeling program SXLSQI that the extraction of sodium and cesium could be adequately modeled by augmenting the previously determined cesium nitrate equilibrium model with a 1:1 Na⁺:crown organic-phase complex. No evidence for a mixed-metal species was found. In accord with our previous study, cesium nitrate extraction entails formation of a 1:1 Cs⁺:crown complex, but a minor 1:2 complex also forms in the case of DC21C7. Although the sodium and cesium made possible by the U. S. Department of Energy Postgraduate Research Program administered by the Oak Ridge Associated Universities.     

Applications of wittig reactions in dibenzo 18‐crown‐6‐ether substituted phenylenevinylene oligomer—synthesis,photo luminescent,and dielectric properties

Novel phenylenevinylene oligomer substituted dibenzo 18‐crown‐6 ether ring (DB‐OPV) was synthesized using dibenzo 18‐crown‐6 with terephthaldicarboxaldehyde via Wittig reaction. Formation of the oligomer was confirmed by spectral (FT‐IR, ¹H and¹³C‐NMR), gel‐permeation chromatography and elemental analysis. The morphology of the oligomer film of one‐dimensional and three‐dimensional architectures was observed using atomic force microscopy. The oligomer showed excellent photoluminescence with bluish green emission maxima at shorter wavelengths of 505 nm. Stability of the oligomer was analyzed using UV spectroscopy with varying time and temperature. The dielectric properties such as dielectric constant and loss factor for the oligomer have also been studied with respect to change of frequency (50 Hz–5 MHz) and temperature (30–60°C). The value of dielectric constant decreased with increasing frequency, which indicates that the major contribution to the polarization comes from orientation polarization. The value of dielectric constant increased with increasing temperature which is due to greater freedom of movement of the dipole molecular chains within the oligomer at high temperature © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

SYNERGIC EXTRACTION OF DIVALENT TRANSITION METALS WITH MIXTURES OF 1-PHENYL-3-METHYL-4 BENZOYL- PYRAZOL-5-ONE AND CROWN ETHERS IN PRESENCE OF ALKALI OR ALKALINE EARTH IONS

The extraction of divalent transition metals (M = Cu, Zn, Co, Cd) with mixtures of 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HL) and crown-ethers (E = B15C5, 18C6, DC18C6, DB18C6, DC24C8, DB24C8 with B = benzo, DB = dibenzo, DC = dicyclohexyl) in chloroform has been studied. From 1.0 M K aqueous solutions, EK.ML₃ ion pairs have been extracted with 18C6 - type crown ethers that have a good correspondence between their cavity size and the K⁺ diameter, _and with M = Co and Cd, metals with a higher stability of the ML- anion. With B15C5, which has a cavity size too small to accomodate K⁺, the synergic extraction of Co is explained by the formation of E₂.K.CoL₃. Both CoL₂E and EBa(CoL₃.) ₂ (E = DBl8C6)were extracted from 0.33M Ba(No₃ ) ₂. In all otHer experiments - extractions from 1.0M LiCl, NaCl, NaNO with B15C5     

A new type of supramolecular assembly consisting of crown ether complex cation and a polyoxometalate anion: Synthesis and crystal structure of [Na(C20H24O6)(CH3CN)2]2[Mo6O19] · 4CH3CN

A novel supramolecular assembly consisting of sodium-dibenzo-18-crown-6(DB18C6) complex cation [Na(C₂₀H₂₄O₆)(CH₃CN)₂]²⁺ and isopolyanion [Mo₆O₁₉]²⁻ has been demonstrated in the 3D structure of [Na(C₂₀H₂₄O₆)(CH₃CN)₂]₂[Mo₆O₁₉] · 4CH₃CN (1). Weak intermolecular forces (C–HO hydrogen bonds) between isopolyanion and crown ether play a significant role in the construction of supramolecular framework in the crystal structure of 1. Compound 1 has been characterized in the solid state by single crystal X-ray diffraction, IR, CHN analysis, and TGA.     

Biotransformation and DNA Adduct Formation of Trans-8,9-Dihydroxy-8,9-Dihydrodibenzo[a,l]Pyrene by Induced Rat Liver and Human CYP1A1 Microsomes

In order to explain the adduct patterns observed from the human CYP1A1-mediated binding of dibenzo[a, l]pyrene (DB[a, l]P) to DNA, we have investigated the further metabolism and DNA adduct activity of trans-DB[a, l]P-8,9-diol by induced rat liver and human CYP1A1 microsomes. trans-DB[a, l]P-8,9-diol was synthesized and metabolic studies with β-naphthoflavone-induced rat liver microsomes indicated three major metabolites: 2 diastereomers of trans,trans-8,9,11,12-tetrahydro-8,9,11,12-tetrahydroxy-DB[a, l]P and 8,9,13,14-tetrahydro-8,9,13,14-tetrahydroxy-DB[a, l]P. DB[a, l]P when activated by CYP1A1/epoxide hydrase (EH) and calf thymus DNA gave a complex pattern of DNA adducts most of which cochromatograph with syn- and anti-DB[a, l]P fjord region diol epoxide-DNA standards. Two highly polar eluting adducts were also observed, one which cochromatographs with the single major DNA adduct obtained from the CYP1A1/EH activation of trans-DB[a, l]P-8,9-diol. The relative retention time of this adduct suggests either a bis-diol epoxide adduct or a more polar diol epoxide adduct.     

Synthesis,Characterization and Properties of One-dimensional Complexes of <Emphasis Type="Italic">cis-syn-cis</Emphasis>-Dicyclohexyl-18-crown-6 with K<Subscript>2</Subscript>[M(mnt)<Subscript>2</Subscript>] (M==Ni,Pd, Pt)

Three complexes [K(DC18C6-A)]₂[M(mnt)₂] (DC18C6-A=cis-syn-cis-dicyclohexyl-18-crown-6, isomer A; M=Ni, 1; Pd, 2; Pt, 3; mnt = 1,2-dicyanoethene-1,2-dithiolate, maleonitriledithiolate, [C₂S₂(CN)₂]²⁻) have been synthesized and characterized by elementary analysis, UV–vis, FT-IR spectroscopy and X-ray single crystal diffraction. They are isomorphous and all display infinite one-dimensional chain-like structure formed by [K(DC18C6-A)]⁺ complex cations and [M(mnt)₂]²⁻ (M=Ni, Pd, Pt) complex anions through K–N interactions. Thermal analysis indicates that three complexes are all thermal stable under 260 °C and experience the same decomposition process of dissociation and evaporation of crown ether molecules. Their electrochemical behaviors have been studied by cyclic voltammetry.     

RADIUM SEPARATION THROUGH COMPLEXATION BY AQUEOUS CROWN ETHERS AND ION EXCHANGE OR SOLVENT EXTRACTION

ABSTRACT

The effect of three water-soluble, unsubstituted crown ethers (15-crown-5 (15C5), 18-crown-6 (18C6) and 21-erown-7 (21C7) on the uptake of Ca, Sr, Ba and Ra cations by a sulfonic acid cation exchange resin, and on the extraction of the same cations by xylene solutions of dinonylnaphthalenesulfonic acid (HDNNS) from aqueous hydrochloric acid solutions has been investigated. The crown ethers enhance the sorption of the larger cations by the ion exchange resin, thereby improving the resin selectivity over calcium, a result of a synergistic interaction between the crown ether and the ionic functional groups of the resin. Similarly, the extraction of the larger alkaline earth cations into. xylene by HDNNS is strongly synergized by the presence of the crown ethers in the aqueous phase. Promising results for intra-Group IIa cation separations have been obtained using each of the three crown ethers as the aqueous ligands and the sulfonic acid cation exchange resin. Even greater separation factors for the radium - calcium couple have been measured with the crown-ethers and HDNNS solutions in the solvent extraction mode. The application of the uptake and extraction results to the development of radium separation schemes it discussed and a possible flowchart for the determination of ²²⁶Ra/²²⁸Ra in natural waters is presented.

     

Eigenschaften und thermische Reaktionen von Komplexen der Arendiazoniumsalze mit Kronenethern

Properties and Thermal Reactions from Complexes of Arene Diazonium Salts with Crown Ethers In contrast to 18-crown-6, the substituted crown ethers Benzo-18-crown-6, Dibenzo-18-crown-6, and Naphtho-18-crown-6 form in solution complexes with p-CH₃ C₆H₄ N₂⁺BF₄-characterized by a broad charge transfer absorption up to 550 nm. The formation constants lg K_c are 2,32 2,16 and 1,44 for Benzo-, Dibenzo-, and Naphtho-18-crown-6, respectively. Formation enthalpy ΔH = −7,5 kJ/mol and entropy ΔS = +18 J/K mol are measured in the case of p-Cl C₆H₄ N₂⁺BF₄⁻ and Dibenzo-18-crown-6 (20°). K_c depends on substituents in the arene ring of the diazonium salt; ϱ = +0,8. Thermal dediazoniation in the presence of Crown ethers results in high yields of the corresponding arene. This is explained by a fast radical chain reaction between the diazonium salt and the polyether (Meerwein-Reduction).     

基于冠醚的离子识别响应型智能材料研究新进展

金属离子对生物体的生命活动起着核心的作用,而一些重金属离子(如Pb²⁺、Hg²⁺)在很低浓度时就对生物具有极强的毒性;因此,研究具有金属离子识别特性的智能材料具有重要的理论价值和实用意义。冠醚具有选择性地络合金属离子的能力,研究者们将冠醚的离子识别特性与聚(N-异丙基丙烯酰胺)的相变行为特性相结合制备了一系列离子识别响应型智能材料。综述了近年来基于18-冠-6和15-冠-5两种冠醚分子的离子识别响应型智能材料的研究新进展。目前,基于冠醚的离子识别响应型智能材料仍多处于基础研究阶段,还需要进一步系统深入研究和开发完善。     

Revisiting the Formation and Tunable Dissociation of a [2]Pseudorotaxane Formed by Slippage Approach

A new [2]pseudorotaxane DB24C8⊃1-H·PF₆ with dibenzo[24]crown-8 (DB24C8) crown ether-dibenzylammonium (1-H·PF₆) binding which was formed by slippage approach at different solvents and temperature, had been isolated and characterized by NMR spectroscopy and mass spectrometry. The [2]pseudorotaxane DB24C8⊃1-H·PF₆ was stable at room temperature. The dissociation rate of [2]pseudorotaxane DB24C8⊃1-H·PF₆ could be tuned by using different stimuli such as triethylamine (TEA)/diisopropylethylamine (DIPEA) and dimethyl sulfoxide (DMSO). In particular, the dissociation of [2]pseudorotaxane DB24C8⊃1-H·PF₆ by an excess of TEA/DIPEA base mixture possessed a long and sustained, complete dissociation over 60 days. Other stimuli by DMSO possessed a relatively fast dissociation over 24 h.     

Silver complexes with large crown ethers in propylene carbonate

The complex formation between large crown ethers – e.g. dibenzo-30-crown-10 – and Ag⁺ in propylene carbonate has been studied using potentiometric and calorimetric titrations. The values of the reaction enthalpies with larger crown ethers than 18-crown-6 especially with dibenzo-30-crown-10 indicate that more than six donor atoms are taking part in the interaction with the complexed cation. The values of the reaction entropies of the largest crown ethers examined indicate the high sterical requirements of the complex formation. Obviously large crown ethers are able to encapsulate the complexed cation. The effectiveness of the encapsulation however depends upon the ring size and flexibility of the crown ethers.     

Synthesis, crystal structure and NMR of [Na(DB18C6)(CH3CN)]3[α-AsM12O40] (M = Mo/W)

Two super-molecular complexes [Na(DB18C6)(CH₃CN)]₃[α-AsM₁₂O₄₀] (M = Mo/W) were obtained by solvothermal reaction and characterized by IR,¹H ¹³C and gUMBC NMR, X-ray. The result reveals that the complex consists of a [α-AsM₁₂O₄₀]³⁻ (M = Mo/W) anion with α-Keggin structure, and three complex [Na (DB18C6)(CH₃CN)]⁺ cations in which every sodium ion is located in the cavity of dibenzo-18-crown-6 with 6 Na–O bonds and coordinated with one of the terminal O atom of [α-AsM₁₂O₄₀]³⁻ (M = Mo/W) and the N atom of CH₃CN from two sides of the distorted DB18C6 plane, respectively. The three terminal O atoms linked with sodium ion are from a single M₃O₁₃ (M = Mo/W) triplet of the α-Keggin metalatoarsenate anion, and M–O_b (M = Mo/W) bonds exhibit alternating single–double bond character.     

Liquid-Liquid Extractions of Microamounts of 137Cs and 85Sr with Chlorinated Dicarbollide and Crown Ethers into Mixed Dodecanenitrile/n-dodecane Nonpolar Diluent

New methods of extraction of ¹³⁷Cs and ⁸⁵Sr into solvent mixture of dodecanenitrile with n-dodecane in the presence of various crown ethers and chlorinated dicarbollide are described. This is the first time when extraction with chlorinated dicarbollide anion was accomplished into a judiciously chosen nonpolar solvent. The theoretical reasoning leading to the choice of such nonpolar solvent is outlined. New crown ethers with laterally branched alkyl chain were synthesized and tested. These, when the same crown moiety is compared, are more effective for Sr²⁺ extraction than the commonly used DC18C6 (18C6 ring moiety), but less effective for Cs⁺ extraction compared with DB21C7 (21C7 moiety). The systems may be used both in analytical applications and, hopefully, after further development, as well in a nuclear reprocessing industry.     

Spacer-chromoionophores — polymethine dye substituted aza-crown ethers with increased complexation ability

Aromatic aldehyde derivatives of N-phenyl-aza-15-crown-5 ( 2 ), N-phenyl-aza-18-crown-6 ( 8 ), and benzo-15-crown-5 ( 10 ) are condensed with malononitrile and 2-amino-1,1,3-tricyano-1-propene to give light yellow to orange colored crown ether derivatives 4 , 5a , 9a , 11 , and 12 . 5a and 9a were acylated with ethyl chloroformate to give the magenta colored dyes 5b and 9b , respectively. By condensation of N-(4-nitrosophenyl)-aza-15-crown-5 3 with 2-amino-1,1,3-tricyano-1-propene the magenta dye 6a is obtained. Acylation of 6a with ethyl chloroformate leads to the deep blue colored dye 6b . In these derivatives the nitrogen or oxygen atoms of the crown ethers are part of the chromophoric system, and binding properties are affected. Further chromophoric derivatives of aza-crown ethers are studied in which these are separated from the chromophoric moiety by a spacer. N-(ω-chloroalkyl)-N-alkylanilines 14a-c were attached to aza-15-crown-5 13a-c and aza-18-crown-6 13b-c to yield the spacer crown ether derivatives 15a-c and 16a-c , respectively. The formylated spacer crown ether derivatives 17a-c and 18b were condensed with 2-amino-1,1,3-tricyano-1-propene to give the orange spacer-chromoionophores 19a-c and 20 . In these crown ether derivatives the extended conjugation is interrupted by the spacer, and good binding properties are obtained. The complex formation constants of the crown ether derivatives with Na⁺ and K⁺ are determined using ¹H NMR spectroscopy.     

Synthesis, Characterization and Thermogravimetric Analysis of Two Dicyclohexyl-18-crown-6 Pd, Pt Isomaleonitriledithiolate Complexes

Two organic–inorganic hybrid dicyclohexyl-18-crown-6 complexes, [K(DC18C6-B)]₂[Pd(i-mnt)₂] (1) and [K(DC18C6-A)]₂[Pt(i-mnt)₂] (2) (DC18C6-A=cis-syn-cis-dicyclohexyl-18-crown-6, A isomer; DC18C6-B = cis-anti-cis-dicyclohexyl-18-crown-6, B isomer; i-mnt=1,1-dicyanoethene-2,2-dithiolate, isomaleonitriledithiolate), were synthesized by the reaction of dicyclohexyl-18-crown-6 with K₂(i-mnt) and PdCl₂ or K₂PtCl₄ respectively. These were characterized by elemental analysis, FT–IR, UV–Vis spectroscopy and single crystal X-ray diffraction. In complex 1, two [K(DC18C6-B)]⁺ complex cations and one [Pd(i-mnt)₂]²⁻ complex anion formed a neutral molecule through two K–N coordination bonds. The resulting molecule adopted a 1D chain arrangement via K N weak interactions. Complex 2 showed a 1D chain-like structure that was assembled by two [K(DC18C6-A)]⁺ complex cations and one [Pt(i-mnt)₂]²⁻ complex anion through N–K–N interactions. An erratum to this article can be found at     

The conductivity of non-aqueous electrolyte solutions containing crown-ethers

The conductance of NaI and RbI in acetonitrile solutions at 25°C in presence of different crown-ethers was measured. Analysis of the data in pure acetonitrile and in presence of the crown compounds was carried out using the Fuoss-Onsager-Skinner equations. Addition of crown ethers to the salt solutions generates a decrease in the conductivity in the order of 12-crown-4 < 15-crown-5 < 18-crown-6 < disubstituted 18-crown-6. The difference between the Λ₀ values of the two systems investigated with the same crown compounds decreases as the complexity of the crown-ether used increases. The results, also compared to those of KI systems, are discussed in terms of competitive interaction forces of the crown-ethers and the solvent molecules on the ionic species present in solution.     

Influence of guests and protonation on the conformation of N,N′-dipyridyl-bis-aza-18-crown-6

Crystallisation of the sodium perchlorate adduct of N,N^′-dipyridyl-bis-aza-18-crown-6 from acidic aqueous conditions yielded [(H₃O)(N,N^′-dipyridyl-bis-aza-18-crown-6)][ClO₄] and [Na·N,N^′-dipyridyl-bis-aza-18-crown-6]₂ [(H⁺)₂N,N^′-dipyridyl-bis-aza-18-crown-6][ClO₄]₄·2H₂O. The conformations of crown ethers were significantly influenced by incorporation of an H₃O⁺ or sodium ion, or protonation of the amino nitrogen atoms resulting in three different structures for the macrocycle.     

Study on the adsorption properties of novel crown ether crosslinked chitosan for metal ions

We first synthesized N‐benzylidene chitosan (CTB) by the reaction of benzaldehyde with chitosan (CTS). Chitosan‐dibenzo‐18‐crown‐6 crown ether bearing Schiff‐base group (CTBD) and chitosan‐dibenzo‐18‐crown‐6 crown ether (CTSD) were prepared by the reaction of 4,4′‐dibromodibenzo‐18‐crown‐6 crown ether with CTB and CTS, respectively. Their structures were confirmed by Fourier transform infrared spectral analysis and X‐ray powder diffraction analysis. These novel crown ether crosslinked CTSs have space net structures with embedded crown ethers and contain the double structures and properties of CTS and crown ethers. They have stronger complexation with and better selectivity for metal ions than corresponding crown ethers and CTS. Moreover, these novel CTS derivatives can be used to separate and preconcentrate heavy or precious metal ions in aqueous environments. From this practical viewpoint, we studied the adsorption and selectivity properties of CTB, CTBD, and CTSD for Ag⁺, Cu²⁺, Pb²⁺, and Ni²⁺. The experimental results showed that CTBD had better adsorption properties and higher selectivity for metal ions than CTSD. For aqueous systems containing Pb²⁺–Ni²⁺ and Pb²⁺–Cu²⁺, the selectivity coefficients of CTSD and CTBD were K/Ni²⁺ = 24.4 and K/Cu²⁺ = 41.4 and K/Ni²⁺ = 35.5 and K/Cu²⁺ = 55.3, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 29–34, 2002; DOI 10.1002/app.10180     

The Synerqistic Solvent Extraction of Manganese by Macrocyclic Crown Ethers in Combination with Didodecylnaphthalene Sulfonic Acid: Effect of Macrocycle Substituents

Abstract

Crown ethers in combination with organophilic cation exchangers synergize the extraction of certain metai ions from aqueous solutions, and their selectivity has been thought largely dependent on the correspondence between the crown other's cavity diameter and the metal ion diameter. This work focuses on two crown ethers, tert. -butylbenzo -15-crown-5 (tBB15C5). and tert, -butylcyclohexano 15-crown-5 (tBC15C5) each of which has a cavity diameter of 1.7 to 2.2 × 10^?10 m. and their extraction of Mn²⁺ (ionic diameter 1.4 to 2.2 × 10^?10 m) from aqueous nitrate solutions. The organophilic cation exchanger used was didodecylnaphthalene sulfonic acid (HDDNS). The data show no observable complexes of the manganese salt of HDDNS