Corona discharge ion mobility spectrometry with orthogonal acceleration time of flight mass spectrometry for monitoring of volatile organic compounds

We demonstrate the application of corona discharge ion mobility spectrometry with orthogonal acceleration time of flight mass spectrometry (CD IMS-oaTOF) for volatile organic compounds (VOCs) monitoring. Two-dimensional (2D) IMS-oaTOF spectra of VOCs were recorded in nearly real time. The corona discharge atmospheric pressure chemical ionization (APCI) source was operated in positive mode in nitrogen and air. The CD ion source generates in air H(3)O(+)(H(2)O)(n) and NO(+). The NO(+) offers additional possibility for selective ionization and for an increase of the sensitivity of monoaromatic compounds. In addition to H(3)O(+)(H(2)O)(n) and NO(+), we have carried out ionization of VOCs using acetone as dopant gas ((CH(3))(2)COH(+)). Sixteen model VOCs (tetrahydrofuran, butanol, n-propanol, iso-propano, acetone, methanol, ethanol, toluene, benzene, amomnia, dioxan, triethylamine, acetonitrile, formaldehyde, m-xylene, 2,2,2-trifluoroethylamine) were tested using these ionization techniques.     

Tributyl phosphate as a sensitivity-enhancing solvent for organotin in carbon furnace atomic absorption spectrometry

Tributyl phosphate (TBP) has been found to be a sensitivity-enhancing solvent for organotin compounds in graphite furnace atomic absorption spectrometry; (C(4)H(9))(2)Sn(O(2)CCH(3))(2), (C(4)H(9))(2)Sn(O(2)CC(11)H(23))(2), (C(4)H(9))(3)SnCl, and (C(4)H(9))(4)Sn all give 1 order of magnitude higher sensitivities in TBP than in toluene or ethyl acetate. The sensitivities are enhanced further 1-2 orders of magnitude in TBP, when PdCl(2)(CH(3)CN)(2) is added as a matrix modifier in the organic solvent. Among the four organotin compounds, (C(4)H(9))(2)Sn(O(2)CCH(3))(2) and (C(4)H(9))(2)Sn(O(2)CC(11)H(23))(2) give better sensitivities than (C(4)H(9))(3)SnCl and (C(4)H(9))(4)Sn in the absence of palladium in any organic solvent, which suggests that the oxygen atom in the tin compound might form tin oxides that are resistant to volatilization loss during ashing. Scanning electron microscopic, electrothermal vaporization ICPMS, and powder X-ray diffraction studies show that the final products before atomization include phosphorus-containing compounds Sn(2)P(2)O(7), SnP(2)O(7), and Pd(9)P(2), besides tin-palladium alloys, PdSn, Pd(3)Sn, Pd(2)Sn, Pd(3)Sn(2), and PdSn(3). These phosphorus-containing compounds would more efficiently stabilize tin and suppress tin vaporization loss during ashing, to give higher sensitivity.     

Alternative thermodiffusion interface for simultaneous speciation of organic and inorganic lead and mercury species by capillary GC-ICPMS using tri-n-propyl-lead chloride as an internal standard

An alternative thermodiffusion interface (TDI) was designed and constructed for the effective online coupling of capillary gas chromatography (cGC) and inductively coupled plasma mass spectrometry (ICPMS). Pb(2+), (CH3)3Pb(+), (C2H5)3Pb(+), Hg(2+), CH3Hg(+) and C2H5Hg(+) were derived as Pb(C4H9)4, (CH3)3PbC4H9, (C2H5)3PbC4H9, (C4H9)2Hg, CH3HgC4H9, and C2H5HgC4H9 when butyl magnesium bromide was employed as a derivatization reagent for a proof-of-concept study, avoiding the loss of their species specific information. All these derivatives together with the neutral fully saturated (CH3)4Pb and (C2H5)4Pb could be quantitatively separated within 7 min using a 15 m long capillary column, allowing the determination and speciation of organic and inorganic Pb and Hg species in a single run. The method detection limits (3sigma) for Me4Pb, Et4Pb, Me3Pb(3+), Pb(2+), MeHg(+), EtHg(+), and Hg(2+) are 0.07, 0.06, 0.04, 7.0, 0.09, 0.1, and 0.2 pg g(-1), respectively. Moreover, tri-n-propyl-lead chloride was synthesized and used as an alternative internal standard for the accurate and simultaneous speciation analysis of Pb and Hg in complicated environmental and biological samples for the first time. This cGC-TDI-ICPMS method was validated by analyzing Pb and Hg species in certified reference materials and then was applied to simultaneous speciation analysis of Pb and Hg in real-life samples. It is expected that these approaches can be extended to the speciation of other organometallic compounds after suitable modifications and so will aid in monitoring the occurrence, pathways, toxicity, and/or biological effects of these compounds in the environment and in organisms.     

Scope and Mechanistic Study of the Coupling Reaction of α, β-Unsaturated Carbonyl Compounds with Alkenes: Uncovering Electronic Effects on Alkene Insertion vs Oxidative Coupling Pathways

The cationic ruthenium-hydride complex [(C(6)H(6))(PCy(3))(CO)RuH](+)BF(4) (-) (1) was found to be a highly effective catalyst for the intermolecular conjugate addition of simple alkenes to α,β-unsaturated carbonyl compounds to give (Z)-selective tetrasubstituted olefin products. The analogous coupling reaction of cinnamides with electron-deficient olefins led to the oxidative coupling of two olefinic C-H bonds in forming (E)-selective diene products. The intramolecular version of the coupling reaction efficiently produced indene and bicyclic fulvene derivatives. The empirical rate law for the coupling reaction of ethyl cinnamate with propene was determined as: rate = k[1](1)[propene](0)[cinnamate](-1). A negligible deuterium kinetic isotope effect (k(H)/k(D) = 1.1±0.1) was measured from both (E)-C(6)H(5)CH=C(CH(3))CONHCH(3) and (E)-C(6)H(5)CD=C(CH(3))CONHCH(3) with styrene. In contrast, a significant normal isotope effect (k(H)/k(D) = 1.7±0.1) was observed from the reaction of (E)-C(6)H(5)CH=C(CH(3))CONHCH(3) with styrene and styrene-d(10). A pronounced carbon isotope effect was measured from the coupling reaction of (E)-C(6)H(5)CH=CHCO(2)Et with propene ((13)C(recovered)/(13)C(virgin) at C(β) = 1.019(6)), while a negligible carbon isotope effect ((13)C(recovered)/(13)C(virgin) at C(β) = 0.999(4)) was obtained from the reaction of (E)-C(6)H(5)CH=C(CH(3))CONHCH(3) with styrene. Hammett plots from the correlation of para-substituted p-X-C(6)H(4)CH=CHCO(2)Et (X = OCH(3), CH(3), H, F, Cl, CO(2)Me, CF(3)) with propene and from the treatment of (E)-C(6)H(5)CH=CHCO(2)Et with a series of para-substituted styrenes p-Y-C(6)H(4)CH=CH(2) (Y = OCH(3), CH(3), H, F, Cl, CF(3)) gave the positive slopes for both cases (ρ = +1.1±0.1 and +1.5±0.1, respectively). Eyring analysis of the coupling reaction led to the thermodynamic parameters, Δ H(?) = 20±2 kcal mol(-1) and S(?) = -42±5 e.u. Two separate mechanistic pathways for the coupling reaction have been proposed on the basis of these kinetic and spectroscopic studies.     

Oxidation Reaction between Periodate and Polyhydroxyl Compounds and Its Application to Chemiluminescence

The oxidation reaction between periodate and polyhydroxyl compounds was studied. A strong chemiluminescent (CL) emission was observed when the reaction took place in a strong alkaline solution without any special CL reagent. However, in acidic or neutral solution, it was hard to record the CL with our instrument. It was interesting to find that in the presence of carbonate the CL signal was enhanced significantly. When O(2) gas and N(2) gas were blown into the reagent solutions, both background and CL signals of the sample were enhanced by O(2) and decreased by N(2). The spectral distribution of the CL emission showed two main bands (λ = 436-446 and 471-478 nm). Based on the studies of the spectra of CL, fluorescence and UV-visible, a possible CL mechanism was proposed. In strongly alkaline solution, periodate reacts with the dissolved oxygen to produce superoxide radical ions. A microamount of singlet oxygen ((1)O(2)*) could be produced from the superoxide radicals. A part of the superoxide radicals acts on carbonates and/or bicarbonates leading to the generation of carbonate radicals. Recombination of carbonate radicals may generate excited triplet dimers of two CO(2) molecules ((CO(2))(2)*). Mixing of periodate with carbonate generated were very few (1)O(2)* and (CO(2))(2)*. These two emitters contribute to the CL background. The addition of polyhydroxyl compounds or H(2)O(2) caused enhancement of the CL signal. It may be due to the production of (1)O(2)* during the oxidized decomposition of the analytes in periodate solution. This reaction system has been established as a flow injection analysis for H(2)O(2), pyrogallol, and α-thioglycerol and their detection limits were 5 × 10(-)(9), 5 × 10(-)(9), and 1 × 10(-)(8) M, respectively. Considering the effective reaction ions, IO(4)(-), CO(3)(2)(-), and OH(-) could be immobilized on a strongly basic anion-exchange resin. A highly sensitive flow CL sensor for H(2)O(2), pyrogallol, and α-thioglycerol was also prepared.     

Spectroscopic investigation in the mid- and far-infrared regions of phosphorus fertilizers derived from thermochemically treated sewage sludge ash

Inorganic phosphorus and nitrogen-phosphorus-potassium (NPK) fertilizers based on phosphates from thermochemically treated sewage sludge ash were analyzed using mid-infrared (mid-IR) and far-infrared (FIR) spectroscopy. The different compounds present in the fertilizers were qualitatively determined with the help of recorded reference spectra of pure substances. Differentiation between various phosphates and other compounds such as sulfates, nitrates, and oxides was possible using combined interpretation of the mid-IR and FIR spectra. The results are in agreement with previous X-ray diffraction (XRD) measurements of the same samples. The main phosphate phases detected were NH(4)H(2)PO(4), MgHPO(4)·3H(2)O, Mg(3)(PO(4))(2), Ca(5)(PO(4))(5)Cl, CaHPO(4)·2H(2)O, Ca(H(2-)PO(4))(2)·H(2)O, and AlPO(4). Furthermore, K(2)SO(4), NH(4)NO(3), Fe(2)O(3), and SiO(2) were identified in the IR spectra. However, ammonium and sulfate compounds were only identified in the mid-IR region but were not detectable in the FIR region.     

Thermolysis of some transition metal nitrate complexes with 1,4-diamino butane ligand

Four complexes are prepared and characterized having molecular formula [Zn(dab)(2)](NO(3))(2), [Cu(dab)(2)](NO(3))(2).H(2)O, [Ni(dab)(2)](NO(3))(2).2H(2)O and [Mn(dab)(2)](NO(3))(2), where dab: 1,4-diaminobutane. Thermolyses of these complexes were investigated by simultaneous thermogravimetry (TG), derivatives thermogravimetry (DTG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC). The kinetics of the thermolysis at early stages is investigated using isothermal TG by applying model-fitting and isoconversional method. Thermolytic process is slow in inert (N(2)) and is fast in air atmosphere due to oxidative nature. To investigate the response of these complexes under the condition of rapid heating, ignition delay (D(i)) has been measured. Thermal stability of the complexes was found to increase in the order Mn < Cu < Ni < Zn.     

A gas chromatographic separation for the h and C stable isotope ratio determination of coal compounds

A new, completely automated gas chromatography technique has been developed to separate the different gaseous compounds produced during underground coal gasification for their (13)C/(12)C and D/H isotope ratio measurements. The technique was designed for separation and collection of H(2), CO, CO(2), H(2)O, H(2)S, CH(4), and heavier hydrocarbons. These gaseous compounds are perfectly separated by the gas-phase chromatograph and quantitatively sent to seven combustion and collection lines. H(2), CO, CH(4), and heavier hydrocarbons are quantitatively oxidized to CO(2) and/or H(2)O. The isotopic analyses are performed by the sealed-tube method. The zinc method is used for reduction of both water and H(2)S to hydrogen for D/H analysis. Including all preparation steps, the reproducibility of isotope abundance values, for a quantity higher than or equal to 0.1 mL of individual components in a mixture (5 mL of gases being initially injected in the gas chromatograph), is ±0.1‰ for δ(13)C(PDB) and ±6‰ for δD(SMOW).     

Morphology-tailored synthesis of tungsten trioxide (hydrate) thin films and their photocatalytic properties

Tungsten trioxide hydrate (3WO(3)·H(2)O) films with different morphologies were directly grown on fluorine doped tin oxide (FTO) substrate via a facile crystal-seed-assisted hydrothermal method. Scanning electron microscopy (SEM) analysis showed that 3WO(3)·H(2)O thin films composed of platelike, wedgelike, and sheetlike nanostructures could be selectively synthesized by adding Na(2)SO(4), (NH(4))(2)SO(4), and CH(3)COONH(4) as capping agents, respectively. X-ray diffraction (XRD) studies indicated that these films were of orthorhombic structure. The as-prepared thin films after dehydration showed obvious photocatalytic activities. The best film grown using CH(3)COONH(4) as a capping agent generated anodic photocurrents of 1.16 mA/cm(2) for oxidization of methanol and 0.5 mA/cm(2) for water splitting with the highest photoconversion efficiency of about 0.3% under simulated solar illumination.     

Fluorophilic ionophores for potentiometric pH determinations with fluorous membranes of exceptional selectivity

Ionophore-doped sensor membranes exhibit greater selectivities and wider measuring ranges when they are prepared with noncoordinating matrixes. Since fluorous phases are the least polar and least polarizable liquid phases known, a fluorous phase was used for this work as the membrane matrix for a series of ionophore-based sensors to explore the ultimate limit of selectivity. Fluorous pH electrode membranes, each comprised of perfluoroperhydrophenanthrene, sodium tetrakis[3,5-bis(perfluorohexyl)phenyl]borate, and one of four fluorophilic H(+)-selective ionophores were prepared. All the ionophores are highly fluorinated trialkylamines containing three electron withdrawing perfluoroalkyl groups shielded from the central nitrogen by alkyl spacers of varying lengths: [CF(3)(CF(2))(7)(CH(2))(3)](2)[CF(3)(CF(2))(6)CH(2)]N, [CF(3)(CF(2))(7)(CH(2))(3)](2)(CF(3)CH(2))N, [CF(3)(CF(2))(7)(CH(2))(3)](3)N, and [CF(3)(CF(2))(7)(CH(2))(5)](3)N. Their pKa values in the fluorous matrix are as high as 15.4 +/- 0.3, and the corresponding electrodes exhibit logarithmic selectivity coefficients for H(+) over K(+) as low as <-12.8. The pKa and selectivity follow the trends expected from the degree of shielding and the length of the perfluoroalkyl chains of the ionophores. These electrodes are the first fluorous ionophore-based sensors described in the literature. The selectivities of the sensor containing [CF(3)(CF(2))(7)(CH(2))(5)](3)N are not only greater than those of analogous sensors with nonfluorous membranes but were of the same magnitude as the best ionophore-based pH sensors ever reported.     

Aqueous heavy metals removal by adsorption on amine-functionalized mesoporous silica

Amino functional mesoporous silica SBA-15 materials have been prepared to develop efficient adsorbents of heavy metals in wastewater. Functionalization with amino groups has been carried out by using two independent methods, grafting and co-condensation. Three organic moieties have been selected to incorporate the active amino sites: aminopropyl (H(2)N-(CH(2))(3)-), [2-aminoethylamino]-propyl (H(2)N-(CH(2))(2)-NH-(CH(2))(3)-) and [(2-aminoethylamino)-ethylamino]-propyl (H(2)N-(CH(2))(2)-NH-(CH(2))(2)-NH-(CH(2))(3)-). Materials have been characterized by XRD, nitrogen sorption measurements and chemical analysis. We have found that all materials preserve the mesoscopic order and exhibit suitable textural properties and nitrogen contents to act as potential adsorbents. Metal removal from aqueous solution has been examined for Cu(II), Ni(II), Pb(II), Cd(II), and Zn(II); adsorption performances of materials prepared by the two functionalization methods have been compared. In addition, copper adsorption process has been thoroughly studied from both kinetic and equilibrium points of view for some selected materials. Aqueous Cu(II) adsorption rates show that the overall process is fast and the time evolution can be successfully reproduced with a pseudo-second-order kinetic model. Whole copper adsorption isotherms have been obtained at 25 degrees C. Significant maximum adsorption capacities have been found with excellent behavior at low concentration.     

Boron removal and recovery from concentrated wastewater using a microwave hydrothermal method

Boron compounds are widely-used raw materials in industries. However, elevated boron concentrations in aqueous systems may be harmful to human and plants. In this study, calcium hydroxide (Ca(OH)(2)) alone and Ca(OH)(2) with phosphoric acid (H(3)PO(4)) addition (P-addition) were used to remove and recover boron from wastewater using hydrothermal methods. A microwave (MW) hydrothermal method was used and compared with the conventional heating (CH) method in batch experiments. Physicochemical properties of the precipitates obtained from both methods were analysed by XRD, SEM with EDX and BET. For the case of Ca(OH)(2) alone and the MW method, experimental results showed that boron recovery efficiency reached 90% within 10 min, and crystals of Ca(2)B(2)O(5)·H(2)O were found in the precipitates as indicated by the XRD analysis. For the case of P-addition and the MW method, boron recovery efficiency reached 99% within 10 min, and calcium phosphate species (CaHPO(4)·H(2)O, CaHPO(4) and Ca(10)(PO(4))(6)(OH)(2)) were formed. The experimental results of this study indicate that the required reaction time of the MW method was much less than that of the CH method, and the MW method is an effective and efficient method for boron removal and recovery from concentrated wastewater.     

Synthesis and field electron emission properties of hybrid carbon nanotubes and nanoparticles

Hybrid ZnO-carbon nanotubes as well as nanodiamond-carbon nanotubes were synthesized via a straightforward process of plasma enhanced chemical vapor deposition. For the former, ZnO nanoparticles were instantly coated on the tube surface in the final growing process of carbon nanotubes, while for the latter diamond nanoparticles were grown using pretreatment of a silicon substrate with Ni(NO(3))(2)·6H(2)O/Mg(NO(3))(2)·6H(2)O alcohol solution prior to deposition and a high H(2)/CH(4) gas flow ratio in the deposition process. The morphology and microstructure of the obtained hybrid materials were characterized by transmission electron microscopy. Both hybrid ZnO-carbon nanotubes and nanodiamond-carbon nanotubes exhibited excellent field emission properties.     

Photocatalytic decomposition of acephate in irradiated TiO2 suspensions

In the present study, the photocatalytic degradation of acephate (O,S-dimethyl acetyl phosphoramidothioate ((CH(3)O)(CH(3)S)P(O)NHCOCH(3))) in aqueous TiO2 suspensions is extensively investigated, pertaining to the concentration of photocatalyst and substrate on degradation rate of acephate. It is found that the acephate can be degradated and mineralized. The high-degradation rate is obtained with 4 g/L concentration of TiO2. Moreover, Langmuir-Hinshelowood rate expression is employed for the degradation of acephate with adsorption constant and rate constant, i.e., 2.0 L/mmol and 0.6 mmol/(min L), respectively. The main target is to identify the products by a number of analytical techniques, such as HPLC, IC, ESR and GC-MS. Under acidic condition, the primary products are phosphorothioic acid, O,O',S-trimethyl ester (CH(3)O(CH(3)S)P(O)OCH(3)) and phosphoramidothioic acid, O,S-dimethyl ester (CH(3)O(CH(3)S)P(O)NH(2)), etc. It indicates that the decomposition of acephate begin from the destruction of C-N and P-N bonds. Subsequently, the P-S, P-O, P-C bonds may be oxidized gradually or simultaneously, and the final products such as CO(2), H(3)PO(4), were formed. About 100% sulfur atoms are transformed into SO(4)(2-) in 180 min, however; only 3% nitrogen atoms and 2% phosphorus atoms were transformed into NO(3)(-) and PO(4)(3-).     

Degradation process of lead chromate in paintings by Vincent van Gogh studied by means of synchrotron X-ray spectromicroscopy and related methods. 2. Original paint layer samples

The darkening of the original yellow areas painted with the chrome yellow pigment (PbCrO(4), PbCrO(4)·xPbSO(4), or PbCrO(4)·xPbO) is a phenomenon widely observed on several paintings by Vincent van Gogh, such as the famous different versions of Sunflowers. During our previous investigations on artificially aged model samples of lead chromate, we established for the first time that darkening of chrome yellow is caused by reduction of PbCrO(4) to Cr(2)O(3)·2H(2)O (viridian green), likely accompanied by the presence of another Cr(III) compound, such as either Cr(2)(SO(4))(3)·H(2)O or (CH(3)CO(2))(7)Cr(3)(OH)(2) [chromium(III) acetate hydroxide]. In the second part of this work, in order to demonstrate that this reduction phenomenon effectively takes place in real paintings, we study original paint samples from two paintings of V. van Gogh. As with the model samples, in view of the thin superficial alteration layers that are present, high lateral resolution spectroscopic methods that make use of synchrotron radiation (SR), such as microscopic X-ray absorption near edge (μ-XANES) and X-ray fluorescence spectrometry (μ-XRF) were employed. Additionally, μ-Raman and mid-FTIR analyses were carried out to completely characterize the samples. On both paint microsamples, the local presence of reduced Cr was demonstrated by means of μ-XANES point measurements. The presence of Cr(III) was revealed in specific areas, in some cases correlated to the presence of Ba(sulfate) and/or to that of aluminum silicate compounds.     

Degradation process of lead chromate in paintings by Vincent van Gogh studied by means of synchrotron X-ray spectromicroscopy and related methods. 1. Artificially aged model samples

On several paintings by artists of the end of the 19th century and the beginning of the 20th Century a darkening of the original yellow areas, painted with the chrome yellow pigment (PbCrO(4), PbCrO(4)·xPbSO(4), or PbCrO(4)·xPbO) is observed. The most famous of these are the various Sunflowers paintings Vincent van Gogh made during his career. In the first part of this work, we attempt to elucidate the degradation process of chrome yellow by studying artificially aged model samples. In view of the very thin (1-3 μm) alteration layers that are formed, high lateral resolution spectroscopic methods such as microscopic X-ray absorption near edge (μ-XANES), X-ray fluorescence spectrometry (μ-XRF), and electron energy loss spectrometry (EELS) were employed. Some of these use synchrotron radiation (SR). Additionally, microscopic SR X-ray diffraction (SR μ-XRD), μ-Raman, and mid-FTIR spectroscopy were employed to completely characterize the samples. The formation of Cr(III) compounds at the surface of the chrome yellow paint layers is particularly observed in one aged model sample taken from a historic paint tube (ca. 1914). About two-thirds of the chromium that is present at the surface has reduced from the hexavalent to the trivalent state. The EELS and μ-XANES spectra are consistent with the presence of Cr(2)O(3)·2H(2)O (viridian). Moreover, as demonstrated by μ-XANES, the presence of another Cr(III) compound, such as either Cr(2)(SO(4))(3)·H(2)O or (CH(3)CO(2))(7)Cr(3)(OH)(2) [chromium(III) acetate hydroxide], is likely.     

Application of tunable diode laser diagnostics for temperature and species concentration profiles of inhibited low-pressure flames

We have employed tunable diode laser absorption spectroscopy (TDLAS) to characterize low-pressure premixed CH(4)/O(2)/Ar flames inhibited with Halon 1301 (CF(3)Br) and the candidate Halon alternative compounds FE-13 (CF(3)H) and HFC-125 (C(2)F(5)H). This work is part of a larger program designed to help identify replacement fire-suppression compounds for the currently used Halon 1301. We have used CO two-line thermometry to profile the temperature in low-pressure laminar flames and have determined concentration profiles for a large number of flame species, including reactive intermediates. To date, we have detected 12 flame species by using TDLAS in our laboratory and report on seven of them here: CH(4), H(2)O, CO, CF(2)O, CF(2)H(2), CF(3)H, and CF(4). To the best of our knowledge, this is the first time the last four species have been observed in flame by the use of TDLAS. Our data are important for validating the detailed kinetic mechanisms of chemical flame inhibition. Our results indicate that TDLAS is a versatile and powerful diagnostic technique for studying combustion processes.     

Kinetics of the degradation of sulfur mustard on ambient and moist concrete

The rate of degradation of the chemical warfare agent sulfur mustard, bis(2-chloroethyl) sulfide, was measured on ambient and moist concrete using (13)C Solid State Magic Angle Spinning Nuclear Magnetic Resonance (SSMAS NMR). Three samples of concrete made by the same formulation, but differing in age and alkalinity were used. The sulfur mustard eventually degraded to thiodiglycol and 1,4-oxathiane via the intermediate sulfonium ions CH-TG, H-TG, H-2TG and O(CH(2)CH(2))(2)S(+)CH(2)CH(2)OH on all of the concrete samples, and in addition formed 8-31% vinyl moieties on the newer, more alkaline concrete samples. This is the first observation of the formation of O(CH(2)CH(2))(2)S(+)CH(2)CH(2)OH on a solid substrate. The addition of 2-chloroethanol to concrete on which mustard had fully degraded to thiodiglycol and 1,4-oxathiane resulted in the formation of O(CH(2)CH(2))(2)S(+)CH(2)CH(2)OH, thus demonstrating the reversibility of sulfur mustard degradation pathways. The sulfur mustard degradation half-lives on ambient concrete at 22 degrees C ranged from 3.5 to 54 weeks. When the substrates were moistened, the degradation half-lives at 22 degrees C ranged from 75 to 350h. The degradation of sulfur mustard occurred more quickly at elevated temperatures and with added water. The non-volatile toxic sulfonium ions persisted for months to years on concrete at 22 degrees C and weeks to months on concrete at 35 degrees C, before decomposing to the relatively non-toxic compounds thiodiglycol and 1,4-oxathiane.     

Quantum dot-based headspace single-drop microextraction technique for optical sensing of volatile species

Core-shell CdSe/ZnS quantum dots (QDs) dispersed in a droplet of organic solvent have been applied for the first time as luminescent probes for the selective detection of volatile species. Luminescence quenching caused by volatile species was examined after their trapping onto a drop using the headspace single-drop microextraction (HS-SDME) approach along with microvolume fluorospectrometry. The novel method is characterized by low reagent and sample consumption, especially regarding QDs, a reduction about 500-fold for each analysis being attained in comparison with luminescent probing in aqueous phase using conventional luminescence spectrometers with 1 cm quartz cells for measurement. To assess QDs as luminescent probes along with HS-SDME, 14 volatile species were tried. Strong luminescence quenching (i.e., I(0)/I > 2.5) was observed for species such as CH(3)Hg(+) and Se(IV) after hydridation with NaBH(4). Moderate luminescent quenching (I(0)/I ≈ 2) was observed for species such as Hg(II) after its conversion into Hg(0), H(2)S, and methylcyclopentadienyl-manganese tricarbonyl (MMT). Small luminescence quenching effects (i.e., 1< I(0)/I <2) were caused by other hydride forming species such as As(III), Sb(III), Te(IV), and Bi(III), as well as SnBu(4), volatile amines, and endosulfan. Detection limits of 6.3 × 10(-9) and 1.6 × 10(-7) M were obtained for Se(IV) and CH(3)Hg(+), respectively. Repeatability expressed as relative standard deviation (N = 7) was about 5%. QD-HS-SDME-μvolume-fluorospectrometry allows one to carry out matrix separation, preconcentration, and confinement of QDs, hence achieving a selective, sensitive, fast, environmentally friendly, and miniaturized luminescence assay.