PEG-300 assisted hydrothermal synthesis of 4ZnO·B2O3·H2O nanorods

4ZnO·B₂O₃·H₂O is commonly used as a flame-retardant filler in composite materials. The microstructure of the powder is of importance in its applications. In our study, for the first time, one-dimensional (1D) nanostructure of 4ZnO·B₂O₃·H₂O with rectangle rod-like shape has been synthesized by a hydrothermal route in the presence of surfactant polyethylene glycol-300 (PEG-300). The nanorods have been characterized by X-ray powder diffraction (XRD), inductively coupled plasma with atomic emission spectroscopy (ICP-AES), thermogravimetry (TG) and differential thermal analysis (DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) equipped with selected area electron diffraction (SAED) as well as high-resolution transmission electron microscopy (HRTEM). These nanorods are about 70 nm in thickness, 150-800 nm in width and have lengths up to a few microns. 4ZnO·B₂O₃·H₂O nanorods crystallize in the monoclinic space group P2₁/m, a = 6.8871(19) Å, b = 4.9318(10) Å, c = 5.7137(16) Å, β = 98.81(21)° and V = 191.779(71) Å³.     

Powder synthesis and characterization of nanocrystalline CeO2 via the combustion processes

Nanocrystalline CeO₂ powders were synthesized by the combustion reactions using citric acid and glycol as fuels and nitrate as an oxidant. The adiabatic flame temperatures in the auto ignition processes of the precursors were calculated theoretically. XRD measurements indicated that the powders produced in the combustion processes were cubic fluorite CeO₂ phase. The size and morphology of the particles and extent of agglomeration in the powders were studied using transmission electron microscopy (TEM) and the particle size analyzer respectively. Blue shifts of the absorption peak of the as-prepared powders were observed.     

Hydrothermal synthesis of nanocrystalline VO2 from poly(diallyldimethylammonium) chloride and V2O5

Novel vanadium dioxide nanorods were fabricated from V₂O₅ in the presence of a reducing agent, the poly(diallyldimethylammonium chloride) (PDDA) via a hydrothermal method at 180 °C for 48 h. The samples produced were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), infrared spectroscopy (FTIR), nitrogen adsorption (BET) and thermogravimetry (TG/DTG). The nanorods obtained are approximately 50 nm wide and from 300 to 500 nm long and presents high surface area (42 m² g⁻¹). The nanocrystalline B phase VO₂ is not produced by hydrothermal treatment in the absence of the PDDA polyelectrolyte.     

Hydrothermal synthesis and magnetic properties of Co0.2Cu0.03Fe2.77O4 nanoparticles

Co_0.2Cu_0.03Fe_2.77O₄ nanoparticles with different morphologies have been synthesized directly via a simple hydrothermal method. The effects of pH value, precursor concentration, reaction temperature and surfactant on the particle size were discussed. X-ray diffraction analyses showed that the as-synthesized Co_0.2Cu_0.03Fe_2.77O₄ nanoparticles possessed typical spinel structure. Scanning electron microscope images showed different morphologies of the particles, including truncated octahedron and octahedron. It was indicated that well-dispersed Co_0.2Cu_0.03Fe_2.77O₄ nanoparticles can be synthesized at pH values ranging from 11 to 13, and reaction temperature of 160 °C. The particle size decreased from 18 to 10 nm after the addition of sodium dodecyl sulphate at the pH value of 9. The magnetic measurement showed that the as-prepared Co-Cu spinel ferrite nanoparticles possessed hard magnetic property.     

CeO2 nanocrystals: Seed-mediated synthesis and size control

This work reports on seed-mediated synthesis and size control of monodispersed CeO₂ nanoparticles. CeO₂ nanoparticles of mean size smaller than 2 nm were first prepared by a simple mixing of aqueous solution of cerium (IV) sulfate and ammonia solution at ambient conditions. Using these as-prepared fine particles as the tiny seeds, tunable sizes of CeO₂ nanoparticles were achieved via a facile hydrothermal treatment. All samples were characterized by X-ray diffraction (XRD), infrared (IR) spectroscopy, UV-vis spectroscopy, and thermogravimetric analysis (TGA). It is shown that in comparison with other inorganic cerium salts such as cerium (III) nitrates, cerium (IV) sulfate appears more suitable for forming CeO₂ nanoparticles at room temperature. Sulfate groups are strongly thermodynamically adsorbed on CeO₂ nanoparticle surfaces. The formation mechanism, surface hydration and sulfation characteristics of the resulting CeO₂ nanoparticles are also discussed.     

The synthesis and selected properties of new compounds: Mg3Fe4(VO4)6 and Zn3Fe4(VO4)6

New compounds: Mg₃Fe₄(VO₄)₆ and Zn₃Fe₄(VO₄)₆ were obtained from a solid state reaction. The temperatures of melting of Mg₃Fe₄(VO₄)₆ and Zn₃Fe₄(VO₄)₆ amount to 950±5 and 850±5°C, respectively. The indexing results and the calculated unit cell parameters for both compounds are given and suggest that both phases are isotypic with Mn₃Fe₄(VO₄)₆. The IR spectra of the above-mentioned compounds are presented.     

Effect of KCl, NaCl and CaCl2 mixture on volume combustion synthesis of TiB2 nanoparticles

Preparation of titanium diboride (TiB₂) nanoparticles was carried out by volume combustion synthesis. TiO₂, B₂O₃ and elemental Mg were mixed with 0-60% salt mixture of KCl, NaCl and CaCl₂ with increment of 15% as a low melting temperature diluent. Compressed samples were synthesized in a tubular furnace at a constant heating rate under argon atmosphere. Thermal analysis of the process showed that the addition of the low melting temperature salts mixture led to a significant decrease in ignition and combustion temperatures. Synthesized samples were then leached by nitric and hydrochloric acids to remove impurities. The samples were examined by XRD, SEM and DLS analysis. The results showed the formation of fine deagglomerated particles with the addition of the salts mixture. The results revealed that 45% salts mixture had the smallest average particle size of about 90 nm.     

Controlled synthesis of Mn3O4 and MnCO3 in a solvothermal system

Controlled synthesis of Mn₃O₄ nanocrystals and MnCO₃ aggregates was achieved by a facile solvothermal method using different divalent manganese source in the solvent of N,N-dimethylformamide (DMF) with/without the introduction of poly(vinylpyrrolidone) (PVP). PVP was used as a co-reducing reagent in the controlled formation of MnCO₃ crystal. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED), Fourier transform infrared (FTIR) spectra, Raman spectrum and magnetic measurement. Higher process temperature and longer solvothermal time were favorable for the formation of MnCO₃ single phase using MnCl₂ as the manganese source. Mn₃O₄ nanocrystals were prepared at a relatively lower temperature. MnCO₃ aggregates consisted by small nanoparticles have a certain orientation, showing that the nanocrystals formed earlier through oriented aggregation. The size of Mn₃O₄ nanocrystals was 22.5 ± 7.3 nm and 7.3 ± 1.4 nm prepared using MnCl₂ and Mn(CH₃COO)₂, respectively, at 160 °C for 24 h. Raman spectra showed size-dependent characteristics. Smaller Mn₃O₄ nanoparticle resulted in a red-shift in Raman spectra. Magnetic property of the prepared Mn₃O₄ nanoparticle was influenced by the size distribution and crystallinity.     

Microwave driven hydrothermal synthesis of Ba1−xSrxTiO3 nanoparticles

Ba_1−xSr_xTiO₃ (BST) nanopowders with composition x = 0.1-0.4 have been prepared using microwave driven hydrothermal synthesis (MDHS). A low temperature process has been chosen in order to avoid high temperature heat treatment leading to particle growth and agglomeration. MDHS method allows obtaining the nanocrystalline powder samples during relatively short period of time (10 min) and therefore MDHS was optimized. In case of the phase evolution studies the XRD measurements were performed. The average size of crystallites was estimated using Scherrer equation. TEM and SEM images were taken for the detailed analysis of the grain size, surface and morphology.     

CeF3 nanoparticles: synthesis and characterization

CeF₃ nanoparticles 5-10 nm in size were prepared using the polyol method. CeCl₃ and HF were heated up in ethylene glycol. At a temperature of 180 °C crystalline CeF₃ nanoparticles were formed. The material was washed with ethanol, centrifugated and dried. The particles were characterized by EDX, XRD and TEM.     

A novel compound with the formula Cd2InVO6

As a result of a solid-state reaction, a compound with the formula Cd₂InVO₆ has been obtained for the first time. This compound melts congruently at 1050 ± 10 °C. It crystallises in the monoclinic system and the unit cell parameters are: a = 0.7964(2) nm, b = 1.1311(3) nm, c = 0.6001(1) nm, γ = 104.1°, Z = 4.     

A facile soft template synthesis and characterization of PbHAsO4 nanocrystals

Monoclinic lead hydrogen arsenate (LHA) nanocrystals with different crystallization morphologies and crystallite sizes were prepared successfully by a soft template synthesis method in the presence of sodium dodecylbenzenesulfonate (SDBS) or polyvinylpyrrolidone (PVP). The products were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The possible mechanism of SDBS and PVP in the experiment was briefly illustrated.     

Structural study and luminescence of TlSrLa(AsO4)2

This work presents the crystal structure and luminescent properties of TlSrLa(AsO₄)₂. In this phase Tl⁺ ions are located in large tunnels delimited by chains of alternating (AsO₄) and (Sr,La)O₈ polyhedra. Thallium atoms are eightfold coordinated with C₁ symmetry. Large TlO distances are observed revealing a low stereochemical activity of the 6s² lone pair. Excitation and emission spectra of Tl⁺ in TlSrLa(AsO₄)₂ showed broad bands at lower energy than those observed in previous works. Excitation spectra are decomposed into multiple Gaussian bands and a theoretical analysis is made to explain the number of observed components. Two Gaussian components are revealed for emission spectra.     

The system Ag2Se-Ho2Se3 in the 0-50 mol.% Ho2Se3 range and the crystal structure of two polymorphic forms of AgHoSe2

The phase diagram of the Ag₂Se-Ho₂Se₃ system in the range of 0-50 mol.% Ho₂Se₃ was constructed with the results of XRD and differential thermal analysis. A dimorphous compound exists in the system at the equimolar ratio of the components. The investigated part of the Ag₂Se-AgHoSe₂ diagram is of the eutectic type with the eutectic coordinates 7 mol.% Ho₂Se₃ and 1125 K. The crystal structure of the high-temperature modification of AgHoSe₂ was studied by X-ray powder diffraction method. α-AgHoSe₂ is described as a NaCl structure (space group ) with the lattice parameter а = 5.7623(3) Å. Atomic parameters were calculated in the isotropic approximation (R_I = 0.0434 and R_Р = 0.0636). The crystal structure of β-AgHoSe₂ was determined by X-ray structure analysis and was refined to R = 0.0487.     

Controllable synthesis and optical properties of NdOHCO3 dodecahedral microcrystals

NdOHCO₃ dodecahedral microcrystals with an orthorhombic structure have been successfully synthesized by the hydrothermal method used urea as the precipitator. Experimental parameters, such as the reaction temperature, the reaction time, and the molar ratio of the starting reagents were examined. The as-synthesized products were characterized by powder X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence. The possible growth process of NdOHCO₃ dodecahedral microcrystals was discussed.     

One-step hydrothermal process to prepare highly crystalline Fe3O4 nanoparticles with improved magnetic properties

Hydrothermal process was successfully used to synthesize Fe₃O₄ powder using ferrous chloride (FeCl₂) and diamine hydrate (H₄N₂·H₂O) as starting materials by carefully controlling the reaction conditions. The as-prepared Fe₃O₄ sample was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), and its magnetic properties were evaluated on a vibrating sample magnetometer (VSM). The nanoscale (40 nm) Fe₃O₄ powder obtained at 140 °C for 6 h possessed a saturation magnetization of 85.8 emu/g, a little lower than that of the correspondent bulk Fe₃O₄ (92 emu/g). It is suggested that the well-crystallized Fe₃O₄ grains formed under appropriate hydrothermal conditions should be responsible for the increased saturation magnetization in nanosized Fe₃O₄.     

A novel broadband emission phosphor Ca2KMg2V3O12 for white light emitting diodes

A novel broadband emission phosphor Ca₂KMg₂V₃O₁₂ was first synthesized by solution combustion method. The X-ray diffraction showed that Ca₂KMg₂V₃O₁₂ phase can be obtained at 600-900 °C through combustion route. The crystal structure of this material was refined by Rietveld method using powder X-ray diffraction. It crystallizes in cubic system and belongs to space group Ia3d with z = 8, a = 0.12500 nm. The excitation band of Ca₂KMg₂V₃O₁₂ peaks at 320 nm in a region between 260 nm and 425 nm, and the emission spectrum exhibits an intense band centered at about 528 nm covering from 400 nm to 800 nm. The colour coordinates of samples prepared at different ignition temperatures are in a range of x = 0.323-0.339, y = 0.430-0.447.     

A mild solvothermal route to α-Fe2O3 nanoparticles

A mild solvothermal route has been developed to synthesize α-Fe₂O₃ nanoparticles using Fe(NO₃)₃ as a starting material. The results from XRD and TEM indicate the α-Fe₂O₃ powders possess a rhombohedrally centered hexagonal structure, and the size of particles from alcohothermal method at 160 °C is about 50-100 nm.     

Microwave-hydrothermal synthesis of the multiferroic BiFeO3

In this work, three different methods for preparing BiFeO₃ polycrystals are compared: hydrothermal synthesis, microwave heating in the solid state and the combination of both, that is a hydrothermal method using microwave heating. The best materials, without high purity reactants, are obtained in few minutes by the last procedure, a new, very fast, reproducible and environment-friendly method of synthesis, which is described and discussed here.     

Solvothermal synthesis of fusiform hexagonal prism SrCO3 microrods via ethylene glycol solution

Fusiform hexagonal prism SrCO₃ microrods were prepared by a simple solvothermal route at 120 °C, and characterized by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and Fourier transform infrared (FT-IR) spectroscopy. By controlling the content of ethylene glycol (EG), it was found that ethylene glycol (EG) played an important role in the formation of such SrCO₃ microrods. Finally, effects of other solvents on the products, including 1,2-propanediol and glycerin, were also investigated.