Electrochemical behaviors of Li[Li(1−x)/3Mn(2−x)/3Nix/3Cox/3]O2 cathode series (0 < x < 1) synthesized by sucrose combustion process for high capacity lithium ion batteries

A mixed cathode material between Li₂MnO₃ and Li[Mn_1/3Ni_1/3Co_1/3]O₂ for high capacity lithium secondary batteries was introduced in this study. It was prepared using the sucrose combustion process because this is a simple process. The oxidation states of Mn, Co and Ni ions in the pristine Li[Li_(1−x)/3Mn_(2−x)/3Ni_x/3Co_x/3]O₂ compounds were confirmed to be tetravalent, trivalent and divalent, respectively, via XANES measurements. Electrochemical charge/discharge studies showed that the highest first discharge capacity of 224 mAh/g was obtained in composition of x = 0.5 at a 0.2 C rate. The oxidation state of the Co and Ni ions in the Li[Li_1/6Mn_1/2Ni_1/6Co_1/6]O₂ changed to higher oxidation states, but that of the Mn ions did not change.     

Synthesis of spherical nanostructured LiMxMn2−xO4 (M = Ni, Co, and Ti; 0 ≤ x ≤ 0.2) via a single-step ultrasonic spray pyrolysis method and their high rate charge-discharge performances

LiM_xMn_2−xO₄ (M = Ni²⁺, Co³⁺, and Ti⁴⁺; 0 ≤ x ≤ 0.2) spinels were prepared via a single-step ultrasonic spray pyrolysis method. Comparative studies on powder properties and high rate charge-discharge electrochemical performances (from 1 to 15 C) were performed. XRD identified that pure spinel phase was obtained and M was successfully substituted for Mn in spinel lattice. SEM and TEM studies confirmed that powders had a feature of ‘spherical nanostructural’, that is, powders consisted of spherical secondary particles with the size of about 1 μm, which were developed from close-packed primary particles with several tens of nanometers. Substitutions enhanced density of second particles to different extents, depending on M and its content. Charge-discharge tests showed that as-prepared LiMn₂O₄ could deliver excellent rate performance (around 100 mAh/g at 10 C). Ni substitution contributed to improving electrochemical performances. In the voltage range of 4.95-3.5 V, the materials showed much better electrochemical performances than LiMn₂O₄ in terms of capacity, cycleability and rate capability.     

Thermal, spectroscopic and magnetic properties of the CoxNi1−x(SeO3)·2H2O (x = 0, 0.4, 1) phases: Crystal structure of Co0.4Ni0.6(SeO3)·2H2O

The Co_xNi_1−x(SeO₃)·2H₂O (x = 0, 0.4, 1) family of compounds has been hydrothermally synthesized under autogeneous pressure and characterized by elemental analysis, infrared and UV-vis spectroscopies and thermogravimetric and thermodiffractometric techniques. The crystal structure of Co_0.4Ni_0.6(SeO₃)·2H₂O has been solved from single-crystal X-ray diffraction data. This phase is isostructural with the M(SeO₃)·2H₂O (M = Co and Ni) minerals and crystallizes in the P2₁/n space group, with a = 6.4681(7), b = 8.7816(7), c = 7.5668(7) Å, β = 98.927(9)° and Z = 4. The crystal structure of this series of compounds consists of a three-dimensional framework formed by (SeO₃)²⁻ selenite oxoanions and edge-sharing M₂O₁₀ dimeric octahedra in which the metallic cations are coordinated by the oxygens belonging to both the selenite groups and water molecules. The diffuse reflectance spectra show the essential characteristics of Co(II) and Ni(II) cations in slightly distorted octahedral environments. The calculated values of the Dq and Racah (B and C) parameters are those habitually found for the 3d⁷ and 3d⁸ cations in octahedral coordination. The magnetic measurements indicate the existence of antiferromagnetic interactions in all the compounds. The magnetic exchange pathways involve the metal orbitals from edge-sharing dimeric octahedra and the (SeO₃)²⁻ anions which are linked to the M₂O₁₀ polyhedra in three dimensions.     

Synthesis and materials characterization of Li2MnO3-LiCrO2 system nanocomposite electrode materials

A series of Li[Cr_xLi_(1−x)/3Mn_2(1−x)/3]O₂, (0.2 ≤ x ≤ 0.4) with nanocomposite structures was synthesized by a solution method with subsequent quenching. The sample structures were investigated by X-ray diffraction (Rietveld refinement), electron diffraction and HRTEM. According to co-indexed electron diffraction patterns and HRTEM images, Li[Cr_0.211Li_0.268Mn_0.520]O₂ was found to be composed of solid solution powders and Li[Cr_0.290Li_0.240Mn_0.470]O₂ and Li[Cr_0.338Li_0.225Mn_0.436]O₂ of nanocomposite powders indexed in monoclinic and hexagonal structure. Among the three compounds, the nanocomposite Li[Cr_0.290Li_0.240Mn_0.470]O₂ cathode prevented spinel-like structural transformation during cycling and delivered a good reversible capacity of about 195 mAh/g.     

Electrochemical properties of (La1−xTix)0.67Mg0.33Ni2.75Co0.25 (x = 0-0.20, at%) hydrogen storage alloys

(La_1−xTi_x)_0.67Mg_0.33Ni_2.75Co_0.25 (x = 0, 0.05, 0.10, 0.15 and 0.20, at%) alloys are synthesized by arc-melting and subsequent heat solid-liquid diffusing techniques, and the crystalline structures and electrochemical properties of the alloys are investigated systematically. The structural analysis results show that all the alloys mainly consist of (La, Mg)Ni₃ phase with the rhombohedral PuNi₃-type structure and LaNi₅ phase with the hexagonal CaCu₅-type structure. However, when the Ti content is higher than 0.10, a little amount of TiNi₃ phase start to form. Electrochemical measurements show that the alloy electrodes could be activated to their maximum discharge capacity within four cycles, the maximum discharge capacity is around 321.9-384.6 mAh g⁻¹, both the cyclic stability and the high-rate discharge ability first increased and then decrease with increasing x. All the results show that a little amount of Ti substitution for La in AB₃-type hydrogen storage alloys is effective to the improvement of the overall electrochemical properties.     

Rietveld refinements of the solid solution Li(1−2x)NixTiO(PO4) (0 ≤ x ≤ 0.50)

Li_(1−2x)Ni_xTiO(PO₄) oxyphosphates with 0 ≤ x ≤ 0.10 crystallize in the orthorhombic system with the space group Pnma, those with 0.10 < x ≤ 0.25 crystallize in the monoclinic system with the space group P2₁/c and compositions with 0.25 < x < 0.50 present a mixture of the limit of the solid solution Li_0.50Ni_0.25TiO(PO₄) and Ni_0.50TiO(PO₄). The structure of the compositions 0 ≤ x ≤ 0.25 is based on a three-dimensional anionic framework constructed of chains of alternating TiO₆ octahedra and PO₄ tetrahedra, with the lithium and nickel atoms in the cavities in the framework. The dominant structural units in the compositions are chains of tilted corner-sharing TiO₆ octahedra running parallel to one of the axis. The oxygen atoms of the shared corners, not implied in (PO₄) tetrahedra, justify the oxyphosphate designation. Titanium atoms are displaced from the geometrical center of the octahedra resulting in alternating long (≈2.25 Å) and short (≈1.71 Å) TiO(1) bonds. The four remaining TiO bond distances have intermediate values ranging from 1.91 to 2.06 Å.     

Effect of B-site doping on Sm0.5Sr0.5MxCo1−xO3−δ properties for IT-SOFC cathode material (M = Fe, Mn)

The crystal structure, thermal expansion rate, electrical conductivity and electrochemical performance of Sm_0.5Sr_0.5M_xCo_1−xO_3−δ (M = Fe, Mn) have been investigated. Two crystal structures have been observed in the specimens of Sm_0.5Sr_0.5Fe_xCo_1−xO_3−δ (SSFC) at room temperature, the perovskite structure of SSFC has an orthorhombic symmetry for 0 ≤ x ≤ 0.4 and a cubic symmetry for 0.5 ≤ x ≤ 0.9. The specimens of Sm_0.5Sr_0.5Mn_xCo_1−xO_3−δ (SSMC) crystallize in an orthorhombic structure. The adjustment of thermal expansion rate to electrolyte, which is one of the main problems of SSC, can be achieved to lower TEC values with more Fe and Mn substitution. Especially, Sm_0.5Sr_0.5Mn_0.8Co_0.2O_3−δ exhibits good thermal compatibility with La_0.8Sr_0.2Ga_0.8Mg_0.2O₃. High electrical conductivities are obtained for all the specimens and they demonstrate above 100 S/cm at 800 °C in SSFC system. The polarization resistance increases with increasing Mn content, Nevertheless, the polarization resistance of SSFC increases with increasing Fe content, but when the amount of Fe reaches to 0.4, the maximum is obtained while the resistance will decrease when the amount of Fe reaches above 0.4. Sm_0.5Sr_0.5Fe_0.8Co_0.2O_3−δ electrode exhibits high catalytic activity for oxygen reduction operating at temperature from 700 to 800 °C.     

High energy density lithium ion batteries using Li2.6Co0.4 − xCuxN (anode) and Cu0.04V2O5 (cathode) electrode materials

Li_2.6Co_0.4 - xCu_xN (x = 0, 0.15) anode materials were prepared by conventional solid state reaction. Between both materials, Li_2.6Co_0.25Cu_0.15N exhibited better capacity retention than that of Li_2.6Co_0.4N. According to electrochemical impedance spectroscopy, the better cycling behavior of Li_2.6Co_0.25Cu_0.15N has been attributed to the improvement in interfacial compatibility between the electrode and electrolyte interface. A possible explanation to this was given. Li_2.6Co_0.4 - xCu_xN/Cu_0.04V₂O₅ full-cells were assembled to investigate the reliability of Li_2.6Co_0.4 - xCu_xN anode materials in practical applications. The Li_2.6Co_0.25Cu_0.15N/Cu_0.04V₂O₅ cell delivered a specific capacity of 260 mA h g^− 1, and a specific energy of 505.7 mW h g^− 1, which was much higher than that of C/LiCoO₂ lithium ion batteries.     

High rate performance of novel cathode material Li1.33Ni1/3Co1/3Mn1/3O2 for lithium ion batteries

Li_1.33Ni_1/3Co_1/3Mn_1/3O₂ with highly ordered structure has been successfully synthesized via a simple co-precipitation process. Charge–discharge tests showed that the initial discharge capacities are 153.0 mAh g⁻¹ and 128.9 mAh g⁻¹ at 5 C (1000 mA g⁻¹) and 10 C (2000 mA g⁻¹) between 2.5 and 4.5 V, respectively. The average full-charge time of this material is less than 12 min at 5 C and 6 min at 10 C. The electrode material composed of the prepared showed a better cyclability. The excellent high rate performance is attributed to the improved ordered layered structure and the electrical conductivity. The excess Li shorten Li⁺ diffusion distance between these submicron and nano-scaled particles. The results show that Li_1.33Ni_1/3Co_1/3Mn_1/3O₂ cathode material has potential application in lithium ion batteries.     

Synthesis of layered Li1.2+x[Ni0.25Mn0.75]0.8−xO2 materials (0 ≤ x ≤ 4/55) via a new simple microwave heating method and their electrochemical properties

Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂ (0 ≤ x ≤ 4/55) was prepared by a new simple microwave heating method and the effect of extra Li⁺ content on electrochemistry of Li_1.2Ni_0.2Mn_0.6O₂ (x = 0) was firstly revealed. X-ray diffraction identified that they had layered α-NaFeO₂ structure (space group R-3m). Linear variation of lattice constant as a function of x value supported the formation of solid solution, that is, extra Li⁺ is possibly incorporated in structure of layered Li_1.2Ni_0.2Mn_0.6O₂ (x = 0), accompanying oxidization of Ni²⁺ to Ni³⁺ to form Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂ (0 ≤ x ≤ 4/55). This was confirmed by X-ray photoelectron spectroscopy that Ni³⁺ appeared and increased in content with increasing x value. Charge–discharge tests showed that Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂ (0 ≤ x ≤ 4/55) truly displayed different electrochemical properties (different initial charge–discharge plots, capacities and cycleability). Li_1.2Ni_0.2Mn_0.6O₂ (x = 0) in this work delivered the highest discharge capacity of 219 mAh g⁻¹ between 4.8 and 2.0 V. Increasing Li content (x value in Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂) reduced charge–discharge capacities, but significantly enhancing cycleability.     

Composition dependent phase connectivity, dielectric and magnetoelectric properties of magnetoelectric composites with Pb(Mg1/3Nb2/3)0.67Ti0.33O3 as piezoelectric phase

Ferrite (Ni_0.6Co_0.4Fe₂O₄) phase, ferroelectric (Pb(Mg_1/3Nb_2/3)_0.67Ti_0.33O₃) phase and magnetoelectric composites of (x)Ni_0.6Co_0.4Fe₂O₄ + (1 − x)Pb(Mg_1/3Nb_2/3)_0.67Ti_0.33O₃ with x = 0.15, 0.30 and 0.45 were prepared using solid-state reaction technique. Presence of Ni_0.6Co_0.4Fe₂O₄ and Pb(Mg_1/3Nb_2/3)_0.67Ti_0.33O₃ was confirmed using X-ray diffraction technique. The scanning electron microscopic images were used to study the microstructure of the composites. Connectivity scheme present in the magnetoelectric (ME) composites are discussed from the microscopic images. Variation of dielectric constant and dielectric loss with temperature for all the composites was studied. Here we report the effect of Ni_0.6Co_0.4Fe₂O₄ mole fraction on connectivity schemes between Ni_0.6Co_0.4Fe₂O₄ and Pb(Mg_1/3Nb_2/3)_0.67Ti_0.33O₃ composite. The variation of magnetoelectric voltage coefficient with dc magnetic field shows peak behaviour. The maximum value of magnetoelectric voltage coefficient of 9.47 mV/cm Oe was obtained for 0.15Ni_0.6Co_0.4Fe₂O₄ + 0.85Pb(Mg_1/3Nb_2/3)_0.67Ti_0.33O₃ composites. Finally we have co-related the effect of Ni_0.6Co_0.4Fe₂O₄ content and dielectric properties on magnetoelectric voltage coefficient.     

Electrical conduction, dielectric behavior and magnetoelectric effect in (x)BaTiO3 + (1 − x)Ni0.94Co0.01Mn0.05Fe2O4 ME composites

Electrical and magnetoelectric properties of magnetoelectric (ME) composites containing barium titanate as electrical component and a mixed Ni-Co-Mn ferrite as the magnetic component are reported. The ME composites with a general formula (x)BaTiO₃ + (1 − x)Ni_0.94Co_0.01Mn_0.05Fe₂O₄ where x varies as 0, 0.55, 0.70, 0.85 and 1 were prepared by standard double sintering ceramic method. The presence of both the phases was confirmed by X-ray diffraction technique. The dc resistivity was measured as a function of temperature. The variation of dielectric constant (?) and loss tangent (tan δ) with frequency (100 Hz-1 MHz) and with temperature was studied. The conduction is explained on the basis of small polaron model based on ac conductivity measurements. The static value of ME conversion factor i.e. dc (ME)_H was studied as function of intensity of magnetic field. The changes were observed in dielectric properties as well as ME effect as the molar ratio of the components was varied. A maximum value of ME conversion factor of 610 μV/cm Oe was observed in the case of a composite containing 15 mol% ferrite phase.     

Negative thermal expansion and electrical properties of Mn3(Cu0.6NbxGe0.4 − x)N (x = 0.05-0.25) compounds

Bulk materials with the general formula of Mn₃(Cu_0.6Nb_xGe_0.4 − x)N (x = 0.05, 0.1, 0.15, 0.2, 0.25), Mn₃(Cu_0.6Ge_0.4)N and Mn₃(Cu_0.7Ge_0.3)N were fabricated by mechanical ball milling and solid state sintering. Their thermal expansion coefficients and electrical conductivities were investigated in the temperature range of 80-300 K. It is found that the temperature interval of negative temperature expansion behavior is about 95 K in the samples of Mn₃(Cu_0.6Nb_0.15Ge_0.25)N and Mn₃(Cu_0.6 Nb_0.2Ge_0.2)N, which is twice as large as that of Mn₃(Cu_0.7Ge_0.3)N. The negative thermal expansion of Mn₃(Cu_0.6Nb_0.15Ge_0.25)N can reach to − 19.5 × 10⁻⁶ K^− 1 in the temperature range of 165 to 210 K. The electrical conductivity of this series materials is in a level of about 2.5 × 10⁶ (Ω m)^− 1.     

Synthesis and electrochemical properties of Ti doped Li3 − xFe2 − xTix(PO4)3/C cathode materials

Li_3 − xFe_2 − xTi_x(PO₄)₃/C (x = 0-0.4) cathodes designed with Fe doped by Ti was studied. Both Li₃Fe₂(PO₄)₃/C (x = 0) and Li_2.8Fe_1.8Ti_0.2(PO₄)₃/C (x = 0.2) possess two plateau potentials of Fe³⁺/Fe²⁺ couple (around 2.8 V and 2.7 V vs. Li⁺/Li) upon discharge observed from galvanostatic charge/discharge and cyclic voltammetry. Li_2.8Fe_1.8Ti_0.2(PO₄)₃/C has higher reversibility and better capacity retention than that of the undoped Li₃Fe₂(PO₄)₃/C. A much higher specific capacity of 122.3 mAh/g was obtained at C/20 in the first cycle, approaching the theoretical capacity of 128 mAh/g, and a capacity of 100.1 mAh/g was held at C/2 after the 20th cycle.     

Synthesis of perovskite-type (La1−xCax)FeO3 (0 ≤ x ≤ 0.2) at low temperature

Gel formation was realized by adding citric acid to a solution of La(NO₃)₃·5H₂O, Ca(NO₃)₂·4H₂O, and Fe(NO₃)₂·9H₂O. Perovskite-type (La_1−xCa_x)FeO₃ (0 ≤ x ≤ 0.2) was synthesized by firing the gel at 500 °C in air for 1 h. The crystallite size (D_1 2 1) decreased with increasing x, while the specific surface area was 6.8-9.4 m²/g and independent of x. The XPS measurement of the (La_1−xCa_x)FeO₃ surface indicated that the Ca²⁺ ion content increased with increasing x, while the Fe ion content was independent of x. Catalytic activity for CO oxidation increased with increasing x.     

Mixed cation effect in xR2O-(40 − x)Na2O-50B2O3-10Bi2O3 (R = Li, K) glasses

Mass density, glass transition temperature and ionic conductivity are measured in xLi₂O-(40 − x)Na₂O-50B₂O₃-10Bi₂O₃ and xK₂O-(40 − x)Na₂O-50B₂O₃-10Bi₂O₃ glass systems with 0 ≤ x ≤ 40 mol%. The strength of the mixed alkali effect in T_g, dc electrical conductivity and activation energy has been determined in each glass system. The magnitudes of the mixed alkali effect in T_g for the mixed Li/Na glass system are much smaller than those in the mixed K/Na glasses. The impact of mixed alkali effect on dc electrical conductivity in mixed Li/Na glass system is more pronounced than in the K/Na glass system. The results are explained based on dynamic structure model.     

Synthesis under high-oxygen pressure, magnetic and structural characterization from neutron powder diffraction data of YGa1−xMn1+xO5 (x = 0.23): A comparison with YMn2O5

A new material of nominal stoichiometry YGaMnO₅ has been prepared in polycrystalline form from citrate precursors followed by thermal treatments under high-oxygen pressure. This compound has been characterized from neutron powder diffraction (NPD) data and magnetic measurements. For comparison, the parent compound YMn₂O₅ has also been synthesized and its crystal structure refined by NPD data. The new oxide has an actual stoichiometry YGa_1−xMn_1+xO₅ (x = 0.23), determined by NPD, showing an important cationic disorder between both metal sites; it is orthorhombic, Pbam (SG), and its crystal structure contains chains of Mn⁴⁺O₆ edge-sharing octahedra, linked together by Ga³⁺O₅ pyramids and YO₈ units. With respect to YMn₂O₅, containing axially elongated MnO₅ pyramids due to the Jahn-Teller effect of Mn³⁺ cations, the GaO₅ pyramidal units in YGa_0.77Mn_1.23O₅ are substantially flattened. This compound has a paramagnetic behaviour with two weak anomalies at about 50 K and 350 K. The magnetic structures, studied at 1.4 K and 100 K show a ferromagnetic coupling along the chains of MnO₆ octahedra.     

Influence of isovalent ion substitution on the electrochemical performance of LiCoPO4

LiCo_1−xM_xPO₄ (M = Mg²⁺, Mn²⁺ and Ni²⁺; 0 ≤ x ≤ 0.2) compounds have been synthesized by solid-state reaction method and studied as cathode materials for secondary lithium batteries. LiCoPO₄ exhibits a discharge plateau at ∼4.7 V with an initial discharge capacity of 125 mAh/g and on cycling capacity falls. Substitution of Co²⁺ with Mg²⁺/Mn²⁺/Ni²⁺ in LiCoPO₄ has an influence on the initial discharge capacity and on cycling behaviour. The capacity retention of LiCoPO₄ is improved by manganese substitution. Among the manganese substituted phases, LiCo_0.95Mn_0.05PO₄ shows good reversible capacity of ∼50 mAh/g.     

Electrical properties of MgAl2-2xZrxMxO4 (M = Co, Ni and x = 0.00-0.20) synthesized by coprecipitation technique using urea

This paper presents the results of a study concerning the structural and electrical properties of MgAl_2-2xZr_xM_xO₄ (x = 0.00-0.20 and M = Co²⁺ and Ni²⁺) prepared by a coprecipitation technique using urea as a precipitating agent. The X-ray diffraction data for the pure and its doped samples are consistent with the single-phase spinel and their crystallite sizes are in the range 7-20 ± 4 nm. The DC resistivity increases from 3.09 × 10⁹ Ω cm to 6.73 × 10⁹ and 8.06 × 10⁹ Ω cm whereas dielectric constant decreases from 5.80 to 5.11 and 4.95 on doping with Zr-Co and Zr-Ni, respectively. The electrical resistivity variations with increase in the dopant contents indicate two types of conduction mechanisms in operation. Several parameters such as, hopping energy (W), metal-semiconductor transition temperature (T_MS) and Debye temperature (θ_D) have also been determined. The increase in DC resistivity and decrease in dielectric constant suggest that the synthesized materials can be considered for application as an insulating and structural material in fusion reactors.     

All-solid-state cells based on solid electrolyte systems Cu1−xAgxI-Ag2O-Y, where x = 0.05-0.25; Y = MoO3, B2O3, SeO2, V2O5 and CrO3

All-solid-state cells of the configuration (−)Ag + SE//SE//I₂-phenothiazine + C(+) using the best conducting compositions of the solid electrolyte systems, namely, Cu_1−xAg_xI-Ag₂O-Y where x = 0.05, 0.1, 0.15, 0.2 and 0.25, Y = MoO₃, B₂O₃, SeO₂, V₂O₅ and CrO₃, as the electrolytes were fabricated. Discharge, polarization and power characteristics of these cells were also evaluated. The open circuit voltage values of these cells were in the range 620-635 mV. The stability of these cells has been indicated by the constancy of their OCV over a period of 6 months. The polarization and discharge studies on these cells have shown that typical cells based on the electrolytes with Y = B₂O₃, SeO₂ and V₂O₅ would possess discharge capacities of 12.84, 3.76 and 5.05 mA h and specific energy of 6.55, 1.81 and 2.77 W h kg⁻¹, respectively. The solid electrolytes have good electrochemical stability and compatibility with the Ag/Phenothiazine-I₂ electrode couple thus offering their suitability of application in microwatt power sources.