Aza‐Henry Reaction of Isatin Ketimines with Methyl 4‐Nitrobutyrate en Route to Spiro[piperidine‐3,3′‐oxindoles]

A new enantioselective route to spiro[piperidine‐3,3′‐oxindoles] from isatin ketimines is described. The aza‐Henry reaction of N‐Boc‐isatin ketimines with methyl 4‐nitrobutyrate in the presence of a Ph₂BOX‐CuBr₂ complex provided the corresponding nitro amino esters with good diastereoselectivity and excellent enantioselectivity (up to >99% ee). The aza‐Henry adducts were transformed into spiro[piperidine‐3,3′‐oxindoles] after reduction of the nitro group to oxime, and cleavage of the N‐Boc group and lactamisation.

     

Synthesis of ω‐amino‐α‐phenylcarbonate alkanes and their polymerization to [n]‐polyurethanes

Aliphatic [n]‐polyurethanes have recently been synthesized from ω‐isocyanato‐α‐alkanols or, more traditionally, by cationic ring‐opening polymerization of cyclourethanes or by the Bu₂Sn(OMe)₂‐promoted polycondensation of ω‐hydroxy‐α‐O‐phenylurethane alkanes. For the latter procedures, the conditions employed do not seem to be suitable for highly functionalized monomers. In contrast, the polymerization of ω‐amino‐α‐phenylcarbonate alkanes is expected to occur under milder conditions. ω‐Amino‐α‐phenylcarbonate alkanes have been synthesized from 6‐aminohexanol (1) and 3‐aminopropanol (6). The procedure involves the N‐Boc protection of the amino group, followed by activation of the alcohol. Removal of the N‐Boc affords the corresponding ω‐amino‐1‐O‐phenyloxycarbonyloxyalkane hydrochlorides. Other oligomeric comonomers between 1 and 6 have been prepared. The polymerization of these precursors takes place in the absence of metal catalysts to afford the corresponding linear and regioregular [n]‐polyurethanes. The procedure described is useful for the preparation of stable ω‐amino‐α‐phenylcarbonate alkane derivatives, which possess varied chain lengths between the terminal functions. These monomers yield [n]‐polyurethanes having various structures starting from just two aminoalkanols. The polyurethanes were obtained in high yields, with reasonable molecular weight and polydispersity values, and they were characterized spectroscopically and thermally. These studies reveal constitutionally uniform structures that are free of carbonate or urea linkages. Copyright © 2010 Society of Chemical Industry     

Synthese des 5‐[(Acetylhydrazono)‐(4‐chlorphenyl)‐methyl]thiophen‐2‐yl‐esters der Trifluormethansulfonsäure

The synthesis of 5‐[(acetylhydrazono)‐(4‐chlorophenyl)‐methyl]thiophen‐2‐yl ester of the trifluoromethanesulfonic acid ( 2a ) and its N‐methyl derivative 2b was attempted. Oxidation of 2‐thiophene boronic acid to 2‐hydroxythiophene and in situ reaction there of with triflic anhydride yielded the hitherto unknown thiophene‐2‐yl ester of the trifluormethanesulfonic acid ( 6 ) which was transformed under Friedel‐Crafts conditions into 5‐(4‐chlorobenzoyl)‐thiophene‐2‐yl ester of the trifluoromethanesulfonic acid ( 3 ). Reaction of 3 with acetyl hydrazine resulted in the formation of the title compound 2a , albeit in low yield. The conversion of N′‐[(5‐bromothiophen‐2‐yl)‐(4‐chlorophenyl)‐methylen]‐N‐methylhydrazide ( 4b ) via boronic acid into 5‐[(acetylmethylhydrazono)‐(4‐chlorophenyl)‐methyl]thiophen‐2‐yl ester of the trifluoromethanesulfonic acid ( 2b ) was not successful.     

Improved conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐ones into 6‐exo‐acetoxy and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐ones

The reaction conditions for the conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐one ( 7b ) into 6‐exo‐acetoxy ( 8b ) and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐one ( 8a ), respectively, were improved. Thus known 6‐endo‐tosyloxy‐bicyclo[2.2.2]octan‐2‐ones (+)‐(1RS,6SR,8SR,11RS)‐11‐[(4‐toluenesulfonyl)oxy]tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 1a ), 13‐methyl‐15‐oxo‐9β,13b‐ethano‐9β‐podocarpan‐12β‐yl‐4‐toluenesulfonate ( 3a ), and methyl (13R)‐16‐oxo‐13‐[(4‐tolylsulfonyl)oxy]‐17‐noratisan‐18‐oate ( 5 ), were converted,in comparable yields, as previously recorded, but much shorter times, into (+)‐(1RS,6SR,8SR,11SR)‐11‐(benzoyloxy) tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 2 ), 13‐methyl‐15‐oxo‐9β,13β‐ethano‐9β‐podocarpan‐12α‐yl benzoate ( 4 ), and methyl (13S)‐13‐(benzoyloxy)‐16‐oxo‐17‐noratisan‐18‐oate ( 6 ), respectively.     

Palladium‐Catalyzed,Highly Efficient,Regiocontrolled Arylation of Electron‐Rich Allylamines with Aryl Halides

The highly efficient and regioselective palladium‐catalyzed Heck coupling of aryl bromides with electron‐rich allylamine derivatives is described. It was found that the choice of solvent, olefin, ligand and additive had a fundamental influence on the regioselectivity and reactivity of the reaction. The combination of palladium acetate [Pd(OAc)₂] and 1,3‐bis(diphenylphosphino)propane (dppp) in ethylene glycol (EG) constitutes a highly effective catalyst system for internal arylation of N‐Boc‐allylamine (tert‐butyl methyl allyliminodicarbonate) with aryl bromides to give good to excellent regioselectivities, while the catalyst system consisting of Pd(OAc)₂, tetrabutylammonium bromide (TBAB) and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) additive allows for a variety of aryl bromides to react efficiently with N,N‐(Boc)₂‐allylamine (di‐tert‐butyl allyliminodicarbonate) in water to exclusively afford the linear (E)‐allylamine products in high yields.     

Three‐Component Staudinger‐Type Stereoselective Synthesis of C‐Glycosyl‐β‐lactams and their Use as Precursors for C‐Glycosyl Isoserines and Dipeptides. A Polymer‐Assisted Solution‐Phase Approach

A collection of 4‐(C‐galactosyl)‐ and 4‐(C‐ribosyl)‐β‐lactams featuring different substituents at C‐3 and N‐1 was prepared by combining in a one‐pot procedure a formyl C‐glycoside, a primary amine, and a substituted acetyl chloride in the presence of base (Staudinger‐type reaction). Sulfonyl chloride and aminomethylated resins were used in sequence to remove excess of components and by‐products. Two pure C‐glycosyl‐β‐lactams were effectively transformed into C‐glycosyl‐N‐Boc‐β‐amino‐α‐hydroxy esters (C‐glycosyl isoserines) and a C‐ribosyl dipeptide via base‐promoted heterocycle ring opening by methanol and L ‐phenylalanine methyl ester, respectively.     

Chromophore‐Linked Substrate (CLS405): Probing Metallo‐β‐Lactamase Activity and Inhibition

Serine‐ and metallo‐β‐lactamases present a threat to the clinical use of nearly all β‐lactam antibiotics, including penicillins, cephalosporins, and carbapenems. Efforts to develop metallo‐β‐lactamase (MBL) inhibitors require suitable screening platforms to allow the rapid determination of β‐lactamase activity and efficient inhibition. Unfortunately, the platforms currently available are not ideal for this purpose. Further progress in MBL inhibitor identification requires inexpensive and widely applicable assays. Herein the identification of an inexpensive and stable chromogenic substrate suitable for use in assays of clinically relevant MBLs is described. (6R,7R)‐3‐((4‐Nitrophenoxy)methyl)‐8‐oxo‐7‐(2‐phenylacetamido)‐5‐thia‐1‐azabicyclo[4.2.0]oct‐2‐ene‐2‐carboxylic acid 5,5‐dioxide (CLS405) was synthesised in a three‐step protocol. CLS405 was then characterised spectroscopically, and its stability and kinetic properties evaluated. With a Δλ_max value of 100 nm between the parent and hydrolysis product, a higher analytical accuracy is possible with CLS405 than with commonly used chromogenic substrates. The use of CLS405 in assays was validated by MBL activity measurements and inhibitor screening that resulted in the identification of N‐hydroxythiazoles as new inhibitor scaffolds for MBLs. Further evaluation of the identified N‐hydroxythiazoles against a panel of clinically relevant MBLs showed that they possess inhibitory activities in the mid‐ to low‐micromolar range. The findings of this study provide both a useful tool compound for further inhibitor identification, and novel scaffolds for the design of improved MBL inhibitors with potential as antibiotics against resistant strains of bacteria.     

Studies on Electrophilic Interaction of 2,3‐Allenols with Electrophilic Halogen Reagents: Selective Synthesis of 2,5‐Dihydrofurans, 3‐Halo‐3‐alkenals,or 2‐Halo‐2‐alkenyl Ketones

The reaction of primary 2,3‐allenols with iodine (I₂) afforded 2,5‐dihydrofurans while that of readily available 1‐aryl or 1‐methyl substituted 2,3‐allenols with bromine (Br₂), N‐bromosuccinimide (NBS), I₂ or N‐iodosuccinimide (NIS) formed the not easily available but synthetically useful 3‐halo‐3‐alkenals and 2‐halo‐2‐alkenyl ketones with good selectivity and yields via a sequential electrophilic interaction of X⁺ with the allene moiety, 1,2‐aryl or 1,2‐proton shift, and H⁺ elimination process.     

Synthesis of 6‐amino acid substituted 4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizines

In the presence of Na₂CO₃ (1S,3S)‐ and (1R,3S)‐1‐(2,2‐dimethoxyethyl)‐2‐(1,3‐dioxobutyl)‐3‐(1,3‐dioxo‐butyl)oxymethyl‐1,2,3,4‐tetrahydrocarboline ( 1 ) were transformed into (1S,3S)‐ and (1R,3S)‐1‐(2,2‐dimethoxyethyl)‐2‐(1,3‐dioxobutyl)‐3‐hydroxymethyl‐1,2,3,4‐tetrahydrocarboline ( 2 ), which were cyclized to (6S)‐3‐acetyl‐6‐hydroxymethyl‐4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizine ( 4 ), via(6S,12bS)‐ and (6S,12bR)‐3‐acetyl‐2‐hydroxyl‐6‐hydroxymethyl‐1,2,3,4,6,7,12,12b‐octahydro‐4‐oxoindolo[2,3‐a]quinoline ( 3 ). (6S)‐ 4 was coupled with Boc‐Gly, Boc‐L‐Asp(β‐benzyl ester), or Boc‐L‐Gln to give 6‐amino acid substituted (6S)‐3‐acetyl‐4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizines 5a , 5b , or 5c , respectively. After the removal of Boc from (6S)‐ 5a (6S)‐3‐acetyl‐6‐glycyl‐4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizine ( 6 ) was obtained. The anticancer activities of (6S)‐ 5 and (6S)‐ 6 in vitro were tested.     

Synthesis and characterization of α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxy‐ ethylamino)propoxy]propyl}polydimethylsiloxane

A novel synthesis path for the monotelechelic polydimethylsiloxane with a diol‐end group, α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxyethylamino)propoxy]propyl}polydimethylsiloxane, is described in this article. The preparation included three steps, which were anionic ring‐opening polymerization, hydrosilylation, and epoxy addition. The structure and polydispersity index of the products were analyzed and confirmed by FTIR, ¹H NMR, ¹³C NMR, H? H, and C? H. Correlated Spectroscopy and gel permeation chromatography. The results demonstrated that each step was successfully carried out and the targeted products were accessed in all cases. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Organocatalytic Asymmetric Sulfa‐Michael Addition to α,β‐Unsaturated Ketones

The highly enantioselective organocatalytic sulfa‐Michael addition to α,β‐unsaturated ketones has been accomplished using benzyl and tert‐butyl mercaptans as the sulfur‐centered nucleophiles. Optically active products are obtained in high yields and good to excellent stereocontrol (up to 96 % ee) from a large variety of enones. Central to these studies has been the use of the catalytic primary amine salt A , derived from 9‐amino‐(9‐deoxy)‐epi‐hydroquinine and D ‐N‐Boc‐phenylglycine, in which both the cation and the anion are chiral, that exhibits high reactivity and selectivity for iminium ion catalysis with enones.     

Vapour–liquid equilibrium of CO2 in aqueous solutions of N‐methyl‐2‐ethanolamine

The equilibrium solubility of CO₂ into aqueous solution of sterically hindered N‐methyl‐2‐ethanolamine or methyl amino ethanol (MAE) was investigated in the temperature range of 303.1–323.1 K and total CO₂ pressure in the range of 1–350 kPa. The N‐methyl‐2‐ethanolamine aqueous solutions studied were 0.968, 1.574, 2.240 and 3.125 mol kg^?1 of solvent. © 2011 Canadian Society for Chemical Engineering     

Organosoluble polyimides derived from asymmetric 2‐substituted‐and 2,2′,6‐trisubstituted‐4,4′‐oxydianilines

We report a new method for the preparation of asymmetric diamines using 4,4′‐oxydianiline (4,4′‐ODA) as the starting material. By controlling the equivalents of bromination agent, N‐bromosuccinimide, we were able to attach bromide and phenyl substituents at the 2‐ or 2,2′,6‐positions of 4,4′‐ODA. Thus, four new asymmetric aromatic diamines, 2‐bromo‐4,4′‐oxydianiline (6), 2,2′,6‐tribromo‐4,4′‐oxydianiline (7), 2‐phenyl‐4,4′‐oxydianiline (8) and 2,2′,6‐triphenyl‐4,4′‐oxydianiline (9), were synthesized by this method. Their structural asymmetry was confirmed using ¹H NMR spectroscopy. Asymmetric polyimides (PI10–PI13) were prepared from these diamines and three different dianhydrides (pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride) in refluxing m‐cresol. The formed polyimides, except PI10a derived from 6 and PMDA, were all soluble in m‐cresol without premature precipitation during polymerization. These polyimides with inherent viscosity of 0.41–0.96 dL g^?1, measured at a concentration of 0.5 g dL^?1 in N‐methyl‐2‐pyrrolidone at 30 °C, can form tough and flexible films. Because of the structural asymmetry, they also exhibited enhanced solubility in organic solvents. Especially, polyimides PI11a and PI13a derived from 7 and 9 with rigid PMDA were soluble in various organic solvents at room temperature. The structural asymmetry of the prepared polyimides was also evidenced from ¹H NMR spectroscopy. In the ¹H NMR spectrum of PI11a, the protons of pyromellitic moiety appeared in an area ratio of 1:2:1 at three different chemical shifts, which were assigned to head‐to‐head, head‐to‐tail and tail‐to‐tail configurations, respectively. These polyimides also exhibited good thermal stability. Their glass transition temperatures ranged from 297 to 344 °C measured using thermal mechanical analysis. © 2013 Society of Chemical Industry     

2‐oxo‐tetrahydrofuran‐3‐yl 9H‐carbazole‐9‐carbodithioate mediated reversible addition‐fragmentation chain transfer (RAFT) polymerization

The 2‐oxo‐tetrahydrofuran‐3‐yl 9H‐carbazole‐9‐carbodithioate (OTCC) mediated reversible addition‐fragmentation chain transfer (RAFT) polymerizations of styrene and methyl acrylate were investigated. The results showed that OTCC was an effective RAFT agent for the polymerizations of styrene and methyl acrylate. The polymerizations exhibited “living”/controlled characters. The resulting carbazole and 2‐oxo‐tetrahydrofuran‐3‐yl groups end‐labeled polymer exhibited stronger fluorescence in N, N‐dimethyl formamide, compared with those of OTCC under the same conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Asymmetric Aza‐Morita–Baylis–Hillman‐Type Reactions: The Highly Enantioselective Reaction between Unmodified α,β‐ Unsaturated Aldehydes and N‐Acylimines by Organo‐co‐catalysis

The highly enantioselective organo‐co‐catalytic aza‐Morita–Baylis–Hillman (MBH)‐type reaction between N‐carbamate‐protected imines and α,β‐unsaturated aldehydes has been developed. The organic co‐catalytic system of proline and 1,4‐diazabicyclo[2.2.2]octane (DABCO) enables the asymmetric synthesis of the corresponding N‐Boc‐ and N‐Cbz‐protected β‐amino‐α‐alkylidene‐aldehydes in good to high yields and up to 99% ee. In the case of aza‐MBH‐type addition of enals to phenylprop‐2‐ene‐1‐imines, the co‐catalytic reaction exhibits excellent 1,2‐selectivity. The organo‐co‐catalytic aza‐MBH‐type reaction can also be performed by the direct highly enantioselective addition of α,β‐unsaturated aldehydes to bench‐stable N‐carbamate‐protected α‐amidosulfones to give the corresponding β‐amino‐α‐alkylidene‐aldehydes with up to 99% ee. The organo‐co‐catalytic aza‐MBH‐type reaction is also an expeditious entry to nearly enantiomerically pure β‐amino‐α‐alkylidene‐amino acids and β‐amino‐α‐alkylidene‐lactams (99% ee). The mechanism and stereochemistry of the chiral amine and DABCO co‐catalyzed aza‐MBH‐type reaction are also discussed.     

Synthesis and spectroscopic investigation of cationic donor‐(π‐bridge)‐acceptor dye, 4‐[N‐(5,6,7,8‐tetrahydroisoquinolinium‐5‐ylidene)methyl]‐N,N‐dialkylaniline iodide

The synthesis and fundamental spectroscopic properties of eight hemicyanine (HC) dyes are presented. The dyes were prepared by the condensation of N‐methyl‐5,6,7,8‐tetrahydroisoquinolinium iodide with p‐(N,N‐dialkylamino)benzaldehydes. The compounds were characterised by nuclear magnetic resonance spectroscopy and their purity was checked with the use of thin‐layer chromatography. The spectroscopic properties of the dyes were determined in three organic solvents. The electronic absorption spectra of the dyes demonstrate moderate sensitivity to the nature of the substituent present in the aromatic ring and low solvent polarity dependence. In contrast to this, the positions of fluorescence bands are affected by the structure of an electron donor and solvent polarity. The 4‐[N‐(5,6,7,8‐tetrahydroisoquinolinium‐5‐ylidene)methyl]‐N,N‐dialkylaniline iodides were applied as fluorescent probes for the monitoring of the progress of free radical polymerisation. The study on the changes in the fluorescence intensity and spectroscopic shifts of the dyes was carried out during thermally initiated polymeriszation of methyl methacrylate. The purpose of these studies was to find a relationship between the changes in the shape and intensity of probe fluorescence and the degree of monomer conversion into polymer.     

Synthesis and characterization of conducting copolymer of Trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene with EDOT

Ferrocene‐substituted conducting polymer namely poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene‐co‐3,4‐ethylenedioxythiophene) [P(MTFE‐co‐EDOT)] was synthesized and its electrochromic properties were studied. Monomer, MTFE, was obtained using 2‐(ferrocenyl)ethene and 3‐methyl‐4‐bromothiophene. The structure of monomer was determined via Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, and ¹³C‐NMR techniques. The copolymer was synthesized using this monomer and EDOT. The resulting copolymer P(MTFE‐co‐EDOT) was characterized by cyclic voltammetry, FTIR, scanning electron microscopy, atomic force microscopy, and UV–vis spectroscopy. The conductivity measurements of copolymer and PEDOT were accomplished by the four‐probe technique. Although poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene) [P(MTFE)] reveals no electrochromic activity, its copolymer with EDOT has two different colors (violet and gray). Band gap (E_g) and λ_max of P(MTFE‐co‐EDOT) were determined. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Discovery of 7‐Aryl‐Substituted (1,5‐Naphthyridin‐4‐yl)ureas as Aurora Kinase Inhibitors

As part of our research projects to identify new chemical entities of biological interest, we developed a synthetic approach and the biological evaluation of (7‐aryl‐1,5‐naphthyridin‐4‐yl)ureas as a novel class of Aurora kinase inhibitors for the treatment of malignant diseases based on pathological cell proliferation. 1,5‐Naphthyridine derivatives showed excellent inhibitory activities toward Aurora kinases A and B, and the most active compound, 1‐cyclopropyl‐3‐[7‐(1‐methyl‐1H‐pyrazol‐4‐yl)‐1,5‐naphthyridin‐4‐yl]urea ( 49 ), displayed IC₅₀ values of 13 and 107 nM against Aurora kinases A and B, respectively. In addition, the selectivity toward a panel of seven cancer‐related protein kinases was highlighted. In vitro ADME properties were also determined in order to rationalize the difficulties in correlating antiproliferative activity with Aurora kinase inhibition. Finally, the good safety profile of these compounds imparts promising potential for their further development as anticancer agents.     

Preparations and properties of thermosensitive terpolymers of N‐isopropylacrylamide,sodium 2‐acrylamido‐2‐methyl‐propanesuphonate,and N‐tert‐butylacrylamide

Terpolymers based on N‐isopropylacrylamide, sodium 2‐acrylamido‐2‐methyl‐propanesulfonate, and N‐tert‐butylacrylamide were synthesized by free‐radical copolymerization with 2,2′‐azobisisobutyronitrile as an initiator. The lower critical solution temperatures (LCSTs) of the linear polymer aqueous solutions were determined by the measurement of the transmittance on UV at different temperatures. The influence of the polymer concentration, polymer composition, and ionic strength on the LCSTs of the linear polymers was investigated. The LCST decreased with increases in the hydrophobic monomer N‐tert‐butylacrylamide, polymer concentration, and ionic strength. The phase transition became sharp when the polymer concentration and ionic strength increased. Meanwhile, the crosslinked hydrogels were prepared with the same recipe used for the linear terpolymers, but a crosslinker was added to the reaction system. The swelling ratios of the hydrogels at various temperatures and salt solutions were determined. The hydrogels possessed both high swelling ratios and thermosensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

O6‐Alkylguanine‐DNA Alkyltransferase‐Mediated Repair of O4‐Alkylated 2′‐Deoxyuridines

O⁶‐Alkylguanine‐DNA alkyltransferases (AGTs) are responsible for the removal of O⁶‐alkyl 2′‐deoxyguanosine (dG) and O⁴‐alkyl thymidine (dT) adducts from the genome. Unlike the E. coli OGT (O⁶‐alkylguanine‐DNA‐alkyltransferase) protein, which can repair a range of O⁴‐alkyl dT lesions, human AGT (hAGT) only removes methyl groups poorly. To uncover the influence of the C5 methyl group of dT on AGT repair, oligonucleotides containing O⁴‐alkyl 2′‐deoxyuridines (dU) were prepared. The ability of E. coli AGTs (Ada‐C and OGT), human AGT, and an OGT/hAGT chimera to remove O⁴‐methyl and larger adducts (4‐hydroxybutyl and 7‐hydroxyheptyl) from dU were examined and compared to those relating to the corresponding dT species. The absence of the C5 methyl group resulted in an increase in repair observed for the O⁴‐methyl adducts by hAGT and the chimera. The chimera was proficient at repairing larger adducts at the O⁴ atom of dU. There was no observed correlation between the binding affinities of the AGT homologues to adduct‐containing oligonucleotides and the amounts of repair measured.