PMOS-Only Sleep Switch Dual-Threshold Voltage Domino Logic in Sub-65-nm CMOS Technologies

A circuit technique is proposed in this paper for simultaneously reducing the subthreshold and gate oxide leakage power consumption in domino logic circuits. Only p-channel sleep transistors and a dual-threshold voltage CMOS technology are utilized to place an idle domino logic circuit into a low leakage state. Sleep transistors are added to the dynamic nodes in order to reduce the subthreshold leakage current by strongly turning off all of the high-threshold voltage transistors. Similarly, the sleep switches added to the output nodes suppress the voltages across the gate insulating layers of the transistors in the fan-out gates, thereby minimizing the gate tunneling current. The proposed circuit technique lowers the total leakage power by up to 77% and 97% as compared to the standard dual-threshold voltage domino logic circuits at the high and low die temperatures, respectively. Similarly, a 22% to 44% reduction in the total leakage power is observed as compared to a previously published sleep switch scheme in a 45-nm CMOS technology. The energy overhead of the circuit technique is low, justifying the activation of the proposed sleep scheme by providing a net savings in total energy consumption during short idle periods.     

Leakage Biased pMOS Sleep Switch Dynamic Circuits

In this brief, a low-overhead circuit technique is proposed to simultaneously reduce subthreshold and gate-oxide leakage currents in domino logic circuits. pMOS sleep transistors and a dual threshold voltage CMOS technology are utilized to place an idle domino logic circuit into a low leakage state. A sleep transistor added to the dynamic node strongly turns off all of the high threshold voltage transistors. Similarly, a sleep switch added to the output inverter exploits the initially high subthreshold and gate-oxide leakage currents for placing a circuit into an ultimately low leakage state. The proposed circuit technique lowers the total leakage power by 56.1% to 97.6% as compared to standard dual threshold voltage domino logic circuits. Similarly, a 4.6% to 50.6% reduction in total leakage power is observed as compared to a previously published sleep switch scheme in a 45-nm CMOS technology     

Sleep switch dual threshold Voltage domino logic with reduced standby leakage current

A circuit technique is presented for reducing the subthreshold leakage energy consumption of domino logic circuits. Sleep switch transistors are proposed to place an idle dual threshold voltage domino logic circuit into a low leakage state. The circuit technique enhances the effectiveness of a dual threshold voltage CMOS technology to reduce the subthreshold leakage current by strongly turning off all of the high threshold voltage transistors. The sleep switch circuit technique significantly reduces the subthreshold leakage energy as compared to both standard low-threshold voltage and dual threshold voltage domino logic circuits. A domino adder enters and leaves a low leakage sleep mode within a single clock cycle. The energy overhead of the circuit technique is low, justifying the activation of the proposed sleep scheme by providing a net savings in total power consumption during short idle periods.     

Pass transistor with dual threshold voltage domino logic design using standby switch for reduced subthreshold leakage current

Dual threshold voltages domino design methodology utilizes low threshold voltages for all transistors that can switch during the evaluate mode and utilizes high threshold voltages for all transistors that can switch during the precharge modes. We employed standby switch can strongly turn off all of the high threshold voltage transistors which enhances the effectiveness of a dual threshold voltage CMOS technology to reduce the subthreshold leakage current. Subthreshold leakage currents are especially important in burst mode type integrated circuits where the majority of the time for system is in an idle mode. The standby switch allowed a domino system enters and leaves a low leakage standby mode within a single clock cycle. In addition, we combined domino dynamic circuits style with pass transistor XNOR and CMOS NAND gates to realize logic 1 output during its precharge phase, but not affects circuits operation in its evaluation and standby phase. The first stage NAND gates output logic 1 can guarantee the second stage computation its correct logic function when system is in a cascaded operation mode. The processing required for dual threshold voltage circuit configuration is to provide an extra threshold voltage involves only an additional implant processing step, but performs lower dynamic power consumption, lower delay and high fan-out, high switching frequencies circuits characteristics. SPICE simulation for our proposed circuits were made using a 0.18 µm CMOS process from TSMC, with 10 fF capacitive loads in all output nodes, using the parameters for typical process corner at 25 °C, the simulation results demonstrated that our designed 8-bit carry look-ahead adders reduced chip area, power consumption and propagation delay time more than 40%, 45% and around 20%, respectively. Wafer based our design were fabricated and measured, the measured data were listed and compared with simulation data and prior works. SPICE simulation also manifested lower sensitivity of our design to power supply, temperature, capacitive load and process variations than the dynamic CMOS technologies.     

Standby/active mode logic for sub-1-V operating ULSI memory

New gate logics, standby/active mode logic I and II, for future 1 Gb/4 Gb DRAMs and battery operated memories are proposed. The circuits realize sub-l-V supply voltage operation with a small 1-μA standby subthreshold leakage current, by allowing 1 mA leakage in the active cycle. Logic I is composed of logic gates using dual threshold voltage (Vt) transistors, and it can achieve low standby leakage by adopting high Vt transistors only to transistors which cause a standby leakage current. Logic II uses dual supply voltage lines, and reduces the standby leakage by controlling the supply voltage of transistors dissipating a standby leakage current. The gate delay of logic I is reduced by 30-37% at the supply voltage of 1.5-1.0 V, and the gate delay of logic II is reduced by 40-85% at the supply voltage of 1.5-0.8 V, as compared to that of the conventional CMOS logic     

Lector with Footed-Diode Inverter: A Technique for Leakage Reduction in Domino Circuits

Leakage power consumption is a major technical problem faced in nanometer or deep submicron CMOS circuit technology. A new circuit technique based on “lector stacking” is proposed in this paper for reducing the subthreshold and gate oxide leakage currents in the idle and non-idle modes of operation for domino circuits. In this technique a p-type and an n-type leakage control transistor (LCT) are introduced between the pull-up and pull-down network, and the gate of one is controlled by the source of the other. For any combination of inputs, one of the LCTs will operate near its cut-off region and will increase the resistance between supply voltage and ground, resulting in reduced leakage current. Lector stacking retains the logic state during the idle mode as in the conventional footerless domino logic. Furthermore, the leakage current is suppressed at the output inverter circuit by adding a diode-footed transistor below the n-type transistor of the inverter, offering a more resistive path between supply voltage and ground.The proposed circuit technique for AND2, OR2, OR4, and OR8 circuits reduces the active power consumption by 13.66 % to 44.45 % and by 12 % to 33 % at the low and high die temperatures, respectively, compared to the standard footerless domino logic circuits. During idle mode for the same logic gates, 1.64 % to 79.39 % and 1.2 % to 35.19 % reduction of leakage current is observed with low and high inputs at 25 °C and 110 °C respectively. Similarly, during non-idle mode 0.94 % to 99.3 % and 1.57 % to 98.58 % is observed with low and high inputs at 25 to 110 °C, respectively, when compared to standard footerless domino logic circuits.     

LECTOR: a technique for leakage reduction in CMOS circuits

In CMOS circuits, the reduction of the threshold voltage due to voltage scaling leads to increase in subthreshold leakage current and hence static power dissipation. We propose a novel technique called LECTOR for designing CMOS gates which significantly cuts down the leakage current without increasing the dynamic power dissipation. In the proposed technique, we introduce two leakage control transistors (a p-type and a n-type) within the logic gate for which the gate terminal of each leakage control transistor (LCT) is controlled by the source of the other. In this arrangement, one of the LCTs is always "near its cutoff voltage" for any input combination. This increases the resistance of the path from V/sub dd/ to ground, leading to significant decrease in leakage currents. The gate-level netlist of the given circuit is first converted into a static CMOS complex gate implementation and then LCTs are introduced to obtain a leakage-controlled circuit. The significant feature of LECTOR is that it works effectively in both active and idle states of the circuit, resulting in better leakage reduction compared to other techniques. Further, the proposed technique overcomes the limitations posed by other existing methods for leakage reduction. Experimental results indicate an average leakage reduction of 79.4% for MCNC'91 benchmark circuits.     

Leakage Power Characteristics of Dynamic Circuits in Nanometer CMOS Technologies

Temperature-dependent subthreshold and gate-oxide leakage power characteristics of domino logic circuits under the influence of process parameter variations are evaluated in this paper. Preferred input vectors and node voltage states that minimize the total leakage power consumption are identified at the lower and upper extremes of a typical die temperature spectrum. New low-leakage circuit design guidelines are presented based on the results. Significantly increased gate dielectric tunneling current, as described in this paper, dramatically changes the leakage power characteristics of dynamic circuits in deeply scaled nanometer CMOS technologies. Contrary to the previously published techniques, a charged dynamic-node voltage state with low inputs is preferred for reducing the total leakage power consumption in the most widely used types of single- and dual-threshold voltage domino gates, particularly at low die temperatures. Furthermore, leakage power savings provided by the dual-threshold voltage domino logic circuit techniques based on input gating are all together reduced due to the significance of gate dielectric tunneling in sub-45-nm CMOS technologies.     

FinFET domino logic with independent gate keepers

Scaling of single-gate MOSFET faces great challenges in the nanometer regime due to the severe short-channel effects that cause an exponential increase in the sub-threshold and gate-oxide leakage currents. Double-gate FinFET technology mitigates these limitations by the excellent control over a thin silicon body by two electrically coupled gates. In this paper a variable threshold voltage keeper circuit technique using independent-gate FinFET technology is proposed for simultaneous power reduction and speed enhancement in domino logic circuits. The threshold voltage of a keeper transistor is dynamically modified during circuit operation to reduce contention current without sacrificing noise immunity. The optimum independent-gate keeper gate bias conditions are identified for achieving maximum savings in delay and power while maintaining identical noise immunity as compared to the standard tied-gate FinFET domino circuits. With the variable threshold voltage double-gate keeper circuit technique the evaluation speed is enhanced by up to 49% and the power consumption is reduced by up to 46% as compared to the standard domino logic circuits designed for similar noise margin in a 32 nm FinFET technology.     

INDEP approach for leakage reduction in nanoscale CMOS circuits

Complementary metal oxide semiconductor (CMOS) technology scaling for improving speed and functionality turns leakage power one of the major concerns for nanoscale circuits design. The minimization of leakage power is a rising challenge for the design of the existing and future nanoscale CMOS circuits. This paper presents a novel, input-dependent, transistor-level, low leakage and reliable INput DEPendent (INDEP) approach for nanoscale CMOS circuits. INDEP approach is based on Boolean logic calculations for the input signals of the extra inserted transistors within the logic circuit. The gate terminals of extra inserted transistors depend on the primary input combinations of the logic circuits. The appropriate selection of input gate voltages of INDEP transistors are reducing the leakage current efficiently along with rail to rail output voltage swing. The important characteristic of INDEP approach is that it works well in both active as well as standby modes of the circuits. This approach overcomes the limitations created by the prevalent current leakage reduction techniques. The simulation results indicate that INDEP approach mitigates 41.6% and 35% leakage power for 1-bit full adder and ISCAS-85 c17 benchmark circuit, respectively, at 32 nm bulk CMOS technology node.     

Ultra-low power FinFET-based domino circuits

Aggressive scaling of single-gate CMOS device face greater challenge in nanometre technology as sub-threshold and gate-oxide leakage currents increase exponentially with reduction of channel length. This paper discusses a double-gate FinFET (DGFET) technology which mitigates leakage current and higher ON state current when scaling is done beyond 32 nm. Here 8 and 16 input OR gate domino logic circuits are simulated on 32 nm FinFET Predictive technology model (PTM) on HSPICE. Simulation results of different 8 input OR gate domino logic circuits like Current-mirror footed domino (CMFD), High-speed clock-delayed (HSCD), Modified-HSCD (M-HSCD), Conditional evaluation domino logic (CEDL) and Conditional stacked keeper domino logic (CSK-DL), all operated in Short Gate (SG) and Low Power (LP) mode, shows tremendous reduction in average power consumption and delay. In this paper, domino logic-based circuit Ultra-Low Power Stack Dual-Phase Clock (ULPS-DPC) is proposed for both CMOS and FinFET (SG and LP modes). Proposed circuit shows maximum reduction in average power consumption of 84.04% when compared with CSK-DL circuit and maximum reduction in delay of 75.4% when compared with M-HSCD circuit at 10 MHz frequency when these circuits are simulated in SG mode.     

A reliable ground bounce noise reduction technique for nanoscale CMOS circuits

Power gating is the most effective method to reduce the standby leakage power by adding header/footer high-V_TH sleep transistors between actual and virtual power/ground rails. When a power gating circuit transitions from sleep mode to active mode, a large instantaneous charge current flows through the sleep transistors. Ground bounce noise (GBN) is the high voltage fluctuation on real ground rail during sleep mode to active mode transitions of power gating circuits. GBN disturbs the logic states of internal nodes of circuits. A novel and reliable power gating structure is proposed in this article to reduce the problem of GBN. The proposed structure contains low-V_TH transistors in place of high-V_TH footer. The proposed power gating structure not only reduces the GBN but also improves other performance metrics. A large mitigation of leakage power in both modes eliminates the need of high-V_TH transistors. A comprehensive and comparative evaluation of proposed technique is presented in this article for a chain of 5-CMOS inverters. The simulation results are compared to other well-known GBN reduction circuit techniques at 22 nm predictive technology model (PTM) bulk CMOS model using HSPICE tool. Robustness against process, voltage and temperature (PVT) variations is estimated through Monte-Carlo simulations.     

Noise constrained transistor sizing and power optimization for dual V/sub t/ domino logic

Dynamic logic is susceptible to noise, especially in the ultra-deep submicrometer dual threshold voltage technology. When the dual threshold voltage is applied to the domino logic, noise immunity must be carefully considered since the significant subthreshold current of the low threshold voltage transistor makes the dynamic node much more susceptible to noise. In the first part of this paper, we introduce a new keeper transistor sizing method to determine the optimal keeper transistor size in terms of speed, power, and noise immunity. With the use of data obtained by presimulation, it is unnecessary to simulate all the design corners corresponding to the feasible NMOS evaluation transistor size ranges to find the optimal keeper transistor size. HSPICE simulation results show that the proposed keeper transistor sizing method can be broadly applied to all the domino logic gates. In the second part of this paper, we propose a new dual threshold voltage domino logic synthesis with the keeper transistor sizing to minimize the power consumption while meeting delay and noise constraints. With the optimal keeper transistor size determined by the proposed keeper transistor sizing method, the dual threshold voltage assignment to domino logic can be simplified to the discrete threshold voltage selection. Experimental results for ISCAS85 benchmark circuits show significant savings on leakage power and active power.     

A new true-single-phase-clocking BiCMOS dynamic pipelined logicfamily for high-speed, low-voltage pipelined system applications

New true-single-phase-clocking (TSPC) BiCMOS/BiNMOS/BiPMOS dynamic logic circuits and BiCMOS/BiNMOS dynamic latch logic circuits for high-speed dynamic pipelined system applications are proposed and analyzed. In the proposed circuits, the bootstrapping technique is utilized to achieve fast near-full-swing operation. The circuit performance of the proposed new dynamic logic circuits and dynamic latch logic circuits in both domino and pipelined applications are simulated by using HSPICE with 1 μm BiCMOS technology. Simulation results have shown that the new dynamic logic circuits and dynamic latch logic circuits in both domino and pipelined applications have better speed performance than that of CMOS and other BiCMOS dynamic logic circuits as the supply voltage is scaled down to 2 V. The operating frequency and power dissipation/MHz of the pipelined system, which is constructed by the new clock-high-evaluate-BiCMOS dynamic latch logic circuit and clock-low-evaluate-BiCMOS (BiNMOS) dynamic latch logic circuit, and the logic units with two stacked MOS transistors, are about 2.36 (2.2) times and 1.15 (1.1) times those of the CMOS TSPC dynamic logic under 1.5-pF output loading at 2 V, respectively. Moreover, the chip area of these two BiCMOS pipelined systems is about 1.9 times and 1.7 times as compared with that of the CMOS TSPC pipelined system. A two-input dynamic AND gate fabricated with 1 μm BiCMOS technology verifies the speed advantage of the new BiNMOS dynamic logic circuit. Due to the excellent circuit performance in high-speed, low-voltage operation, the proposed new dynamic logic circuits and dynamic latch logic circuits are feasible for high-speed, low-voltage dynamic pipelined system applications     

Diode-footed domino: a leakage-tolerant high fan-in dynamic circuit design style

A leakage-tolerant design technique for high fan-in dynamic logic circuits is presented. An NMOS transistor with gate and drain terminals tied together (diode) is added in series with the evaluation network of standard domino circuits. Due to the stacking effect, the leakage of the evaluation path significantly decreases, thereby improving the robustness of the circuit against deep-submicron subthreshold leakage and input noise. To improve the speed of the circuit, a current mirror is also employed in the evaluation network to increase the evaluation current. The proposed technique (diode-footed domino) exhibits considerable improvement in leakage and noise immunity as compared to the standard domino circuits. Simulation results of wide fan-in gates designed using Berkeley Predictive Technology Models of 70-nm technology demonstrate at least 1.9/spl times/ noise-immunity improvement at the same delay compared to the standard domino circuits. Dynamic comparators and multiplexers are designed using the diode-footed domino and conventional techniques to demonstrate the effectiveness of the proposed scheme in improving leakage-tolerance and performance of high fan-in circuits.     

Subthreshold Source-Coupled Logic Circuits for Ultra-Low-Power Applications

This paper presents a novel approach for implementing ultra-low-power digital components and systems using source-coupled logic (SCL) circuit topology, operating in weak inversion (subthreshold) regime. Minimum size pMOS transistors with shorted drain-substrate contacts are used as gate-controlled, very high resistivity load devices. Based on the proposed approach, the power consumption and the operation frequency of logic circuits can be scaled down linearly by changing the tail bias current of SCL gates over a very wide range spanning several orders of magnitude, which is not achievable in subthreshold CMOS circuits. Measurements in conventional 0.18 m CMOS technology show that the tail bias current of each gate can be set as low as 10 pA, with a supply voltage of 300 mV, resulting in a power-delay product of less than 1 fJ. Fundamental circuits such as ring oscillators and frequency dividers, as well as more complex digital blocks such as parallel multipliers designed by using the STSCL topology have been experimentally characterized.     

A 4:1 Multiplexer using dual chirality CNTFET-based domino logic in nano-scale technology

ABSTRACT

This paper proposes a 4:1 Multiplexer (MUX) designed using proposed Dual Chirality High-Speed Noise Immune Domino Logic (DCHSNIDL) technique for designing lower delay noise immune domino logic circuits in Carbon Nanotube Field Effect Transistors (CNTFETs) technology. Dynamic power consumption, speed and noise immunity of the circuit are improved by changing the threshold voltage of the CNTFETs. The chirality indices of the carbon nanotubes (CNTs) are varied to change the threshold voltage of the CNTFETs. Simulations are carried out for 32 nm Stanford CNTFET model in HSPICE for 2-, 4-, 8- and 16-input domino OR gates at a clock frequency of 200 MHz on a DC supply voltage of 0.9V. The proposed DCHSNIDL domino circuit reduces power consumption by a maximum of 61.77% and propagation delay by a maximum of 55.11% compared to Current-Mirror Based Process Variation Tolerant (CPVT) circuit in CNTFET technology. The proposed CNTFET-based domino technique shows a maximum reduction of 96.31% in power consumption compared to its equivalent circuit in CMOS technology for a 4-input OR gate. The proposed technique shows an improvement of 1.04× to 1.35× times in Unity Noise Gain (UNG) compared to various existing techniques in CNTFET technology. The 4:1 MUX designed using proposed technique has 48.91% lower propagation delay and consumes 52.80% lower power compared to MUX using CPVT technique.     

A minimum total power methodology for projecting limits on CMOS GSI

A circuit design methodology minimizing total power drain of a static complementary metal-oxide-semiconductor (CMOS) random logic network for a prescribed performance, operating temperature range, and short channel threshold voltage rolloff is investigated. Physical, continuous, smooth, and compact “transregional” MOSFET drain current models that consider high-field effects in scaled devices and permit tradeoffs between saturation drive current and subthreshold leakage current are employed to model CMOS circuit performance and power dissipation at low voltages. Transregional models are used in conjunction with physical short channel MOSFET threshold voltage rolloff models and stochastic interconnect distributions to project optimal supply voltages, threshold voltages, and device channel widths minimizing total power dissipated by CMOS logic circuits for each National Technology Roadmap for Semiconductors (NTRS) technology generation. Optimum supply voltage, corresponding to minimum total power dissipation, is projected to scale to 510 mV for the 50-nm 10-GHz CMOS generation in the year 2012. Techniques exploiting datapath parallelism to further scale the supply voltage are shown to offer decreasing reductions in power dissipation with technology scaling     

Domino logic with variable threshold voltage keeper

A variable threshold voltage keeper circuit technique is proposed for simultaneous power reduction and speed enhancement of domino logic circuits. The threshold voltage of a keeper transistor is dynamically modified during circuit operation to reduce contention current without sacrificing noise immunity. The variable threshold voltage keeper circuit technique enhances circuit evaluation speed by up to 60% while reducing power dissipation by 35% as compared to a standard domino (SD) logic circuit. The keeper size can be increased with the proposed technique while preserving the same delay or power characteristics as compared to a SD circuit. The proposed domino logic circuit technique offers 14% higher noise immunity as compared to a SD circuit with the same evaluation delay characteristics. Forward body biasing the keeper transistor is also proposed for improved noise immunity as compared to a SD circuit with the same keeper size. It is shown that by applying forward and reverse body biased keeper circuit techniques, the noise immunity and evaluation speed of domino logic circuits are simultaneously enhanced.     

Introduction of a new technique for simultaneous reduction of the delay and leakage current in digital circuits

By the reduction in the size of transistors and the development of submicron technology, as well as the construction of more integrated circuits on chips, leakage power has become one of the main concerns of electronic circuit designers. In this article, we first review techniques presented in recent years to reduce leakage power and then present a new technique based on the gate-level body biasing technique and the multi-threshold CMOS technique to minimize leakage power in digital circuits. Afterward, we develop another new method by improving the first proposed technique to achieve higher efficiency and simultaneously reduce leakage power and propagation delay in digital circuits. In the proposed technique, we use two dynamic threshold MOSFET transistors to reduce leakage current. In this paper, the body biasing generator structure is applied to reduce propagation delay. The proposed technique has been successfully validated and verified by post-layout simulation with Cadence Virtuoso based on the 32 nm process technology.We evaluate the efficiency of the proposed techniques by examining factors including power, delay, area, and the power delay product. The simulation results using HSPICE software and performance analysis to process corner variations based on the 32 nm process technology show that the proposed technique, in addition to having proper performance in different corners of the technology, significantly reduces leakage power and propagation delay in logic CMOS circuits. In general, the proposed technique has a very successful performance compared to previous techniques.