Investigation on luminescence properties of Ln^3＋ doped Sr3EuMgSi2O8 （Ln=Dy, Er, Ho）

The luminescent properties of Sr2.97MgSi2O8:Eu2+0.01 phosphors were investigated with different Ln3+0.02(Ln3+:Dy3+,Er3+,Ho3+) co-dopants. The co-dopants had no influence on both the structure of the lattice and the position of the emission peak. However, the afterglow properties of samples were enhanced with different co-dopants. The afterglow duration of the Dy3+ co-doped sample was longer than that of the others. Furthermore, the co-doping samples had stronger thermoluminescence (TL) intensity and therefore longer afterglow duration. At last, the self-reduction of Eu3+→Eu2+ was observed in an silicate compound of Sr3-xMgSi2O8:xEu phosphor in air condition. This is the first time to show a blue long afterglow phosphor synthesized avoiding reducing atmosphere.     

Intense blue-emitting Ca₂PO₄Cl:Eu²⁺ phosphor for near-ultraviolet converting white light-emitting diodes

A blue phosphor Ca2PO4Cl:Eu2+(CAP:Eu2+) was synthesized by solid state reaction.The Ca2PO4Cl:Eu2+ exhibited high quantum efficiency and excellent thermal stability.The luminescent intensity of Ca2PO4Cl:Eu2+ was found to be 128% under excitation at 380 nm,149% under 400 nm,and 247% under 420 nm as high as that of BaMgAl10O17:Eu2+.The optimal doping concentration was observed to 11 mol.% of CAP:Eu2+.The energy transfer between Eu2+ ions in CAP were occurred via electric multipolar interaction,and the critical transfer distance was estimated to be 1.26 nm.A mixture of blue-emitting Ca2PO4Cl:Eu2+,green-emitting(Ba,Sr)2SiO4:Eu2+ and red-emitting CaAlSiN3:Eu2+ phosphors were selected in conjunction with 400 nm chip to fabricate white LED devices.The average color-rendering index Ra and correlated color temperature(Tc) of the white LEDs were found to be 93.4 and 4590 K,respectively.The results indicated that it was a promising candidate as a blue-emitting phosphor for the near-UV white light-emitting diodes.     

Synthesis and luminescence properties of SrAleO4：Eue＋,Dy3＋ hollow microspheres via a solvothermal co-precipitation method

SrAl2O4:Eu2+,Dy3+ hollow microspheres were successfully prepared through a facile and mild solvothermal co-precipitation combining with a postcalcining process.The structure and particle morphology were investigated by X-ray diffraction(XRD),scanning and transmission electron microscopy(SEM and TEM)pictures,respectively.The mechanism for the formation of spherical SrAl2O4:Eu2+,Dy3+ phosphor was preliminary presented.After being irradiated with ultraviolet(UV)light,the spherical phosphor emitted long-lasting green phosphorescence.Both the photoluminescence(PL)spectra and luminance decay,compared with that of commercial bulky powders,revealed that the phosphors had efficient luminescent and long lasting properties.It was considered that the SrAl2O4:Eu2+,Dy3+ hollow microspheres had promising long-lasting phosphorescence with potential scale-dependent applications in photonic devices.     

Effect of trivalent rare earth ions doping on the fluorescence properties of electron trapping materials SrS：Eu~（2＋）

Trivalent rare-earth ions (La3+,Pr3+,Nd3+,Sm3+,Gd3+,Tb3+,Dy3+,Ho3+,Er3+,Tm3+,and Yb3+) were investigated as the codoped auxiliary sensitizer for the electron trapping materials SrS:Eu2+ in order to enhance the fluorescence properties.It was found that Sm3+ and Tb3+ had the best photoluminescence stimulated luminescence (PSL) effect among the selected trivalent rare-earth ions.All the SrS:Eu2+ samples doped by different trivalent rare-earth ions could be stimulated by 980 nm laser after being exposed to the conventional sunlight,and they emitted PSL with the peak located at 615 nm.The result also indicated that some co-doped rare earth ions could increase fluorescence intensities of the traditional electron trapping materials SrS:Eu2+.     

Photoluminescence properties and effect of Bi~（3＋） dopant of Eu~（3＋） and Dy~（3＋） co-doped Sr_3V_2O_8

Photoluminescence properties of Sr 2.5 Dy 1/3-x Eu x V 2 O 8(x=0,0.06,0.12,0.18,0.24,0.33) were investigated.The excitation spectra included a broad band in the short wavelength region and several sharp lines in the longer wavelength region,and the spectral origin were discussed.The emission spectra were measured in two different exciting ways,i.e.,exciting the VO 4 group at 270 nm and the Eu 3+ ion at 398 nm,respectively,and the energy transferring process was reasonably suggested.Furthermore,multi-color emission could be achieved in Sr 2.5 Dy 1/3-x Eu x V 2 O 8,indicating that the studied samples had potential applications in the white light emitting diodes.Further investigation showed that reducing the concentration of Eu 3+ and Dy 3+ and introducing Bi 3+ as a sensitizer ion greatly enhanced the emission intensity.     

Sol-gel processed Ce^3＋, Tb^3＋ codoped white emitting phosphors in Sr2Al2SiO7

Sr2Al2SiO7：Ce^3＋, Tb^3＋ white emitting phosphors were fabricated using the sol-gel method. X-Ray Powder Diffraction （XRD） analysis confirmed the formation of Sr2Al2SiO7：Ce^3＋, Tb^3＋. Scanning Electron Microscopy （SEM） observation indicated that the microstructure of the phosphor consisted of regular fine grains with an average size of about 0.5-1 μm. Luminescence properties were analyzed by measuring the photoluminescence spectra. The Ce^3＋, Tb^3＋-codoped Sr2Al2SiO7 phosphors showed four main emission peaks： one at 414 nm for Ce^3＋ and three at 482, 543, and 588 nm for Tb^3＋. The emission spectra of the samples with different doping concentrations showed that the Tb^3＋ emission was dominant because of the persistent energy transfer from Ce^3＋. The decay characteristic was better than that prepared by the solid-state process in the comparable condition. The codoped phosphor displayed long persistent white phosphorescence.     

Luminescent properties of red phosphors K2Ba（MoO4）2：Eu3＋ for white light emitting diodes

K2Ba(MoO4)2:Eu3+ phosphors were synthesized by solid-state reaction. The emission and excitation spectra of K2 Ba(MoO4)2:Eu3+ phosphors exhibited that the phosphors could be effectively excited by near ultraviolet (394 nm) and blue (465 nm) light, and emitted red light at 616 nm. The influence of Eu3+concentration, sintering temperature and charge compensators (K+, Na+ or Li+ ) on the emission intensity were investigated. The results indicated that concentration quenching of Eu3+ was not observed within 30mol.% Eu 3+, 600 oC was a suitable sintering temperature for preparation of K2 Ba(MoO4)2:Eu3+phosphors, and K+ ions gave the best improvement to enhance the emission intensity. The CIE chromaticity coordinates of K2 Ba(MoO4)2:0.05Eu3+phosphor were calculated to be (0.68, 0.32), and color purity was 97.4%.     

Synthesis and luminescence properties of europium activated Ca3Al2O6-Sr3Al2O6 system

Divalent europium activated tristrontium dialuminum hexaoxide phosphor, (Sr1-xEux)3Al2O6, was obtained by solid state reaction. Crystal structure and luminescence properties of synthesized (Sr1-xEux)3Al2O6 were investigated. The major excitation band of (Sr1-xEux)3Al2O6 located in blue light region, the photoluminescence spectrum showed red light emission peaked at 618 nm which could be attributed to the d-f transition of the Eu2+. The influence of Ca2+ substitution for Sr2+ on structural and luminescence properties of Eu2+ doped Sr3Al2O6 was also studied. The photoluminescence peak position of (Sr1-yCay)2.94Eu0.06Al2O6 varied from 618 to 655 nm with increasing y value. The reason for redshift in the emission band of (Sr1-yCay)2.94Eu0.06Al2O6 phosphor was also discussed.     

Synthesis and spectral characteristics of La2MoO6：Ln3＋ （Ln=Eu, Sm, Dy, Pr, Tb） polycrystals

The novel phosphors of La 2 MoO 6 activated with the trivalent rare earth Ln 3+ (Ln=Eu, Sm, Dy, Pr, Tb) ions were synthesized by solid state reactions at high temperature in air atmosphere, and their phase impurities and luminescent properties were studied. The photoluminescence (PL) excitation and emission spectra, and decay curves were employed to study their luminescence properties. The lifetimes of the characteristic emissions from Ln 3+ ions were in the order of millisecond except Pr 3+ ions. (LaEu 1-x ) 2 MoO 6 was a promising phosphor for practical application and the optimum concentration was x=0.075. The concentration quenching mechanism of Eu 3+ was also discussed by theoretical fitting using Burshtein model.     

Luminescent Properties of Green Phosphor Ca8Mg（SiO4 ）4 Cl2：EU^2＋ , DY^3＋ for LED Applications

The new phosphor calcium magnesium chlorosilicate, codoped with Eu^2＋ and Dy^3＋, was synthesized with the help of the high temperature solid state reaction in reducing atmosphere. The excitation and emission spectra were very similar to that of Ca8Mg（SiO4）4Cl2 ：Eu^2＋, and the Dy^3＋ concentration influenced the emission intensity of this phosphor. The intensity of Eu^2＋ and Dy^3＋ codoped CMSC was stronger than that of Eu^2＋ singly doped CMSC. The emission spectrum of the Dy^3＋ ion overlapped the absorption band of the Eu^2＋ ion, indicating that an energy transfer from Dy^3＋ to Eu^2＋ took place in CMSC：Eu^2＋, Dy^3＋ phosphor. The mechanism of the energy transfer from Dy^3＋ tO Eu^2＋, in this phosphor, might be resonant energy transfer.     

Luminescence properties of a new yellow long-lasting phosphorescence phosphor NaAlSiO_4:Eu~(2+),Ho~(3+)

A new aluminosilicate long-lasting phosphor with composition of NaAlSiO4:Eu2+,Ho3+ was synthesized and investigated. Under UV light excitation, the phosphor emitted yellow light corresponding to the characteristic emission of Eu2+ due to 5d-4f transition. Bright yellow phosphorescence sustaining for more than 30 min was observed after ceasing the excitation. The phosphorescence intensity decay obeyed a t–1 decay law, indicating a tunneling electron-hole recombination process in the phosphor. Four peaks appeared in the thermoluminescence curve and the ones at 322 and 370 K were thought to account for the long lasting phosphorescence at room temperature. The Ho3+ ion incorporated into the phosphor did not give any light but dramatically increased the intensities of both photoluminescence and phosphorescence via promoting defect levels in the phosphor.     

Synthesis and luminescence properties of Sr3-z（AlxSi1-x）O5-xFx：zCe^3＋phosphors

Sr3-z(Alx,Si1-x)O -5-xFx:zCe3+ phosphors were synthesized by high-temperature solid-state reaction.The structure and luminescence properties of phosphors with various Al/Si ratios and Ce3+ concentrations were characterized using various methods such as X-ray diffraction,photoluminescence excitation and photoluminescence spectra.XRD result displayed that a complete solid solution between Sr3AlO4F and Sr3SiO5 was formed.With the increasing of x value,a broader excitation band and stronger absorption appeared in the blue light region.Moreover,the emission band shifted to a shorter wavelength and the emission intensity reached a maximum at x=0.6.By adjusting the concentration of Ce3+,a widely tunable range of emission wavelength under the excitation of 460 nm was obtained from the green to yellow regions.In addition,the concentration and thermal quenching were also discussed.     

Synthesis and luminescence properties of a novel phosphor Ca2–x/2Si1–xPxO4:Eu2+for near UV-excited white-light-emitting diodes

A novel green-emitting phosphor,Eu2+-doped Ca2-x/2 Si1-x Px O4(0.25≤x≤0.30),was prepared through a conventional solidstate reaction.X-ray diffraction(XRD),photoluminescence(PL) and decay studies were employed to characterize the sample,which was assigned to P63mc space group in the hexagonal system.The effect of P-doping on the α-Ca2 SiO4 was studied and P2 O5 broken down by the raw material of(NH4)2 HPO4 played an important role in stabilizing α-Ca2 SiO4 which can only be stable at high temperature.The XRD patterns of the Ca2-x/2 Si1-x Px O4 host were found pure and optimized when the mole fraction of P2 O5 was 14.5%.The diffuse reflectance spectra of the Ca1.855 Si0.71 P0.29 O4 and Ca1.845 Si0.71 P0.29 O4 :0.01Eu2+covered the spectral region of 230-400 nm,implying that the phosphor was suitable for UV or near-UV LED excitation.The phosphor could be effectively excited in the near UV region with the maximum at 372 nm.The emission spectrum of the Ca1.845 Si0.71 P0.29 O4 :0.01Eu2+phosphor showed an asymmetrical single intensive band centered at 513 nm,which corresponded to the 4f65d1→4f7transition of Eu2+.Eu2+ions might occupy two types of Ca2+sites in the Ca1.855 Si0.71 P0.29 O4 lattice and form two corresponding emission centers,which led to the asymmetrical emission of Eu2+in Ca1.855 Si0.71 P0.29 O4.The effects of Eu2+-doped concentration in Ca1.855-x Si0.71 P0.29 O4 :xEu2+on the PL were also discussed,the optimum doping concentration of Eu2+was 1 mol.% and the critical distance of the energy transfer was also calculated by the concentration-quenching method.The non-radiative energy transfer between Eu2+seemed to be caused by the multipole-multipole interaction.The fluorescence lifetime of Eu2+was found to be 0.55711 μs.The results suggested that these phosphors might be promising candidates used for near UV light excited white LEDs.     

Luminescent properties of MMgP_2O_7：Eu~（3＋）（M=Ca,Sr,Ba） phosphor

A series of red phosphors Eu3+-doped MMgP2O7(M=Ca,Sr,Ba) were synthesized by solid-state reaction method.X-ray powder diffraction(XRD) analysis confirmed the formation of pure CaMgP2O7,SrMgP2O7 and BaMgP2O7 phase.Photoluminescence spectra of MMgP2O7(M=Ca,Sr,Ba):Eu3+ phosphors showed a strong excitation peak at around 400 nm,which was coupled with the characteristic emission(350-400 nm) from UV light-emitting diode.The CaMgP2O7:Eu3+,SrMgP2O7:Eu3+ and BaMgP2O7:Eu3+ phosphors showed strong emission bands peaking at 612,593 and 587 nm,respectively.Due to the difference of the ion sizes between Ba2+(0.142 nm),Sr2+(0.126 nm),Ca2+(0.112 nm),Mg2+(0.072 nm) and Eu3+(0.107 nm),Eu3+ ions were expected to substitute for different sites in CaMgP2O7,SrMgP2O7 and BaMgP2O7 lattice.     

Effect of gadolinium incorporation on optical characteristics of YNbO_4：Eu~（3＋） phosphors for lamp applications

Eu3+-doped (Y,Gd)NbO4 phosphor was synthesized by solid-state reaction for possible application in cold cathode fluorescent lamps. A broad absorption band with peak maximum at 272 nm was observed which was due to the charge transfer between Eu3+ ions and neighboring oxygen anions. A deep red emission at the peak wavelength of 612 nm was observed which could be attributed to the 5D0→7F2 transition in Eu3+ ions. The highest luminance for Y1-x-yGdyNbO4:Eux3+ under 254 nm excitation was achieved at Eu3+ concentration of 18 mol.% (x=0.18) and Gd3+ concentration of 8.2 mol.% (y=0.082). The luminance of Y0.738Gd0.082NbO4:Eu3+0.18 was higher than that of a typical commercial phosphor Y2O3:Eu3+ and the CIE chromaticity coordinate was (0.6490, 0.3506), which was deeper than that of Y2O3:Eu3+. The particle size of the synthesized phosphors was controlled by the NaCl flux and particle size as high as 8 μm with uniform size distribution of particles was obtained.     

Energy transfer in Tb~（3＋）,Yb~（3＋） codoped Lu_2O_3 near-infrared downconversion nanophosphors

Tb3+ and Yb3+ codoped Lu2O3 nanophosphors were synthesized by the reverse-strike co-precipitation method. The obtained Lu2O3:Tb3+,Yb3+ nanophosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectra. The XRD results showed that all the prepared nanophosphors could be readily indexed to pure cubic phase of Lu2O3 and indicated good crystallinity. The Tb3+→Yb3+ energy transfer mechanisms in the UV-blue region in Lu2O3 nanophosphors were investigated. The experimental results showed that the strong visible emission around 543 nm from Tb3+ (5D4→7F5) and near-infrared (NIR) emission around 973 nm from Yb3+ (2F5/2→2F7/2) of Lu2O3:Tb3+,Yb3+ nanophosphors were observed under ultraviolet light excitation, respectively. Tb3+ could be effectively excited up to its 4f75d1 state and relaxed down to the 5D4 level, from which the energy was transferred cooperatively to two neighboring Yb3+. The Yb3+ concentration dependent luminescent properties and lifetimes of both the visible and NIR emissions were also studied. The lifetime of the visible emission decreased with the increase of Yb3+ concentration, verifying the efficient energy transfer from the Tb3+ to the Yb3+. Cooperative energy transfer (CET) from Tb3+ to Yb3+ was discussed as a possible mechanism for the near-infrared emission. When doped concentrations were 1 mol.% Tb3+ and 2 mol.% Yb3+, the intensity of NIR emission was the strongest.     

Synthesis of CaWO4：Eu3＋ phosphor powders via ethylene glycol route and its optical properties

Eu3+ doped CaWO4 with tetragonal system were prepared at comparatively low temperature (125 ?C) in ethylene glycol medium. The phosphor was further investigated by X-ray diffractometer (XRD), photoluminescence spectrophotometer (PL), Fourier transform infra red (FT-IR) spectroscopy and transmission electron microscopy (TEM). XRD analysis indicated a decrease in the unit cell volume of CaWO4 with increasing Eu3+ ion concentration. It indicated the homogeneous substitution of Ca2+ ions in CaWO4 by the Eu3+ ions. TEM images showed that the particle size ranged from 20 to 200 nm and it could extend the application of the nanoparticles. The photoluminescence study showed that the intensity of electric dipole transition (5D0→7F2) at 614 nm dominated over the magnetic dipole transition (5D0→7F1) at 592 nm. The optimum concentration of Eu3+ for the highest luminescence was found to be 20 at.%. The as prepared samples were found to be dis-persible in water and methanol.     

Characterization and photoluminescence of Lu_2O_3-Eu~（3＋） nano-phosphor prepared by modified solution combustion method

Nanoscale Lu2O3:Eu3+ phosphor was prepared by a modified solution combustion method using urea and acrylamide monomer.The particle sizes and photoluminescent properties of nano-phosphor were closely related to the molar ratio of urea-to-RE nitrates and acrylamide monomer-to-RE nitrates.The as-prepared samples with the sizes of 9.6-11.6 nm were characterized by X-ray diffraction,scanning electron microscopy,transmission electron microscopy and energy dispersive spectrometer.Lu2O3:Eu3+ nano-phosphor that depicted high photoluminescence in the size around 10 nm was reported.Compared with the sample prepared by solid state reaction,the photoluminescence of sample was increased sufficiently to be 45.1%.The emission spectra of the samples presented the typical emission from 5D0 level to 7FJ(J=0,1,2,3,4) level of the Eu3+ ion.     

BaEMg（BOa）2：Ce^3＋,Eu^2＋,Na^＋： A potential single-phased two colour borate phosphor for white light-emitting diodes

A two colour phosphor Ba 2 Mg(BO3)2:Ce3+,Eu2+,Na+ was synthesized using solid-state reaction method.Luminescence of Ba2Mg(BO3)2:Ce3+,Eu2+,Na+ showed 416 and 618 nm emission bands attributed to Ce3+ and Eu2+ emission, respectively. Energy transfer occurred from Ce3+ to Eu2+ through a significant overlap of Eu 2+ excitation spectrum with Ce3+ emission spectrum in Ba 2 Mg(BO3)2. They also showed that under the excitation of UV radiation, bluish or yellowish white light was generated by coupling a broad blue emission band and a red emission band.By combining with green phosphor, Ba2Mg(BO3 ):Ce3+,Eu2+,Na+ phosphor showed potential application for white light-emitting diodes (LEDs).     

Luminescence and Preparation of LED Phosphor Ca8Mg （ SiO4）4Cl2 ： Eu^2＋

Calcium magnesium chlorosilicate doped by europium, Ca8Mg（SiO4）4Cl2： Eu^2＋, was prepared by the solid state reaction at high temperature. The compound obtained is pure Ca8Mg（SiO4）4Cl2 phase with cubic structure. Its average particle size is 5 μm, and it has good dispersity and morphological form. The excitation spectrum of Ca8Mg（SiO4）4Cl2： Eu^2＋ is a wide band, which covers from 270 to 480 nm. The emission spectrum is also a wide band peaked at 510 nm. The luminescent intensity reaches to the maximum when the concentration of Eu^2 ＋ is 2%. The wavelength of emission and excitation of the phosphor with various Eu^2 ＋ contents keeps constant. This spectrum range matches violet and blue LED chips very well, and its strong luminescence intensity is suitable for a green phosphor of tricolor phosphor of white light LED.