共查询到20条相似文献,搜索用时 62 毫秒
1.
VHDL作为一种硬件描述性语言,主要用于设计大规模铁数字硬件系统和电路,随着电路的规模加大,复杂度增加,这种语言的优越性越来越明显,它正在逐渐成为电子设计师们设计数字硬件电路时所必须掌握的工具语言,在动态存储测试领域中,由于被测对象复杂多样,要求一次记录的信息量不断增加,而允许放置测试仪器的空间很小,因此用VHDL设计大规模集成电路估动态存储测试领域中具有广泛的应用前景。 相似文献
2.
3.
介绍了超声波物位计的工作原理和系统硬件结构,分析了系统收发电路各个模块的设计。着重介绍了驱动电路设计、回波接收电路、放大滤波电路、电压比较电路。调试结果表明,系统工作稳定,测量精度高。 相似文献
4.
5.
本文介绍了神经网络的全硬件实现方法,采用数字脉冲形式,设计了一个全硬件实现的神经网络图象识别系统,提供了数字脉冲神经元电路的设计方法。网络分为三层,采取层内有互连的前向,组合式网络结构,不同层中的神经元不同,同一层中也有不同的元,它们之间存在相互连接。 相似文献
6.
7.
本文介绍了“轮廓仪的多参数微机测量系统”的构成和技术指标,阐述了设计硬件电路和编制数据处理软件的方法,最后对系统的测量精度进行了测试与比对。 相似文献
8.
轮廓仪的多参数微机测量系统 总被引:1,自引:0,他引:1
本文介绍了“轮廓仪的多参数微机测量系统”的构成和技术指标,阐述了设计硬件电路和编制数据处理软件的方法,最后对系统的测量精度进行了测试与比对。 相似文献
9.
介绍了基于核心控制板和功能扩展板的硬件设计理念.根据智能地雷系统的要求,设计了S3C2416XH-40的控制处理模块.详细阐述了系统的硬件设计思想、工作原理及其终端设备的工作流程.经实际测试,该硬件电路的设计符合智能地雷系统的性能指标要求,并且具有体积小、低成本、低功耗等优点. 相似文献
10.
11.
12.
13.
Yongkang Chen Mike Bacich Cory Nardin Albert Sitorus Mark M. Weislogel 《Microgravity science and technology》2005,17(4):14-24
The behavior of wall-bound drops and bubbles is fundamental to many natural and industrial processes. Key characteristics
of such capillary systems include interface shape and stability for a variety of gravity levels and orientations. Significant
solutions are in hand for axisymmetric pendent drops for a variety of uniform boundary conditions along the contact line with
gravity acting normal to a planar wall. The special case of a wall-bound drop or bubble that is also pinned at an edge (i.e.
a ‘wall-edge-bound’ drop) is considered here where numerical solutions are obtained for interface shape and stability as functions
of drop volume, contact angle, fluid properties, and uniform gravity vector. For a semi-infinite zero-thickness planar wall
(plate), a critical contact angle is identified below which wall-edge-bound drops are always stable. The critical contact
angle is computed as a function of the gravity vector. The numerical procedure, which makes no account for contact angle hysteresis,
predicts that such wall-edge-bound drops are unconditionally unstable for any gravity field with a component that is tangent
to the wall while inwardly normal to the edge. Select experiments are conducted that support the conclusions drawn from the
numerical results. 相似文献
14.
《Measurement Techniques》1975,18(12):1719-1725
15.
16.
17.
热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考. 相似文献
18.
We have synthesized a variety of alkali-metal and ammonium fluorosulfatometallates (titanates, zirconates, and hafnates). The alkali fluorosulfatozirconates and fluorosulfatohafnates have been shown to exhibit efficient roentgenoluminescence (RL) in the UV through visible spectral region, with a maximum at 390–440 nm. Their RL spectra depend significantly on their composition (cation, anion, and water content), coordination of KF and K2SO4, and relative amounts of fluorine and SO4 groups. We have examined the effect of heat treatment on the RL of these compounds. The rubidium and cesium fluorosulfatozirconates Rb3Zr2F9SO4 · 2H2O, Cs2ZrF2(SO4)2 · 2H2O, Cs8Zr4F2(SO4)11 · 16H2O, and Cs2ZrF4SO4 offer the most efficient RL. 相似文献
19.
20.
计量仪器收发工作是沟通计量检定部门以及送检单位之间的桥梁,也是计量检定工作的前提。随着各级计量技术机构业务量的不断增加,计量技术机构除了要树立顾客至上的服务理念之外,同时还要用专业、高效的管理模式来赢得顾客的信赖与认可。在计算机信息技术的不断发展与更新的大环境下,传统的管理模式已经不能适应计量检测工作的需求,因此,要有效的利用网络信息技术来促进计量仪器收发业务管理模式的创新,进而提高计量仪器收发业务管理的工作效率。 相似文献