盒形件拉深模CAD中智能化设计方法

介绍在塑性加工领域中运用智能化技术进行盒形件拉深模设计的方法,使用C语言的作为开发工具,以模具压边圈的设计为例建立知识库、并构造推理机、编译器等模块,从而构造出一个完善的盒形件拉深模智能设计系统。     

盒形件拉深角部变形区的应力解析

盒形件拉深主要变形区集中在盒形件角部的法兰和凹模圆角部位。根据盒形件拉深的特点,假设盒形件圆角区剪应力零线与圆筒形拉深件的变形规律相同,通过理论推导得到了盒形件角部变形区法兰和凹模圆角处的应力解析表达式,为定量研究盒形件拉深成形提供了理论依据。     

盒形件智能化拉深变压边力控制规律及其预测

智能化拉深过程中压边力规律的实时预测是关键技术之一。选择非轴对称件中的锥壁盒形件为研究对象,通过数值模拟和试验对成形过程中压边力随凸模行程的变化规律进行研究,得到能够提高成形质量的较优压边力变化趋势,提出破裂临界压边力控制原理,并将前馈神经网络模型引入盒形件智能化拉深压边力控制规律的预测,预测结果与试验吻合较好,实现较优压边力规律的实时预测,为实现盒形件拉深成形过程的智能化控制奠定基础。     

参数化盒形件拉深模CAD系统研究

针对我国中小型企业拉深模设计的现状,提出了一种开发模式,即基于微机开发实用的盒形件拉深模CAD系统。并阐述了系统的功能、结构及实现方法。     

盒形件主要变形区的应力近似理论解析

根据盒形件拉深变形的特点,假设盒形件切应力零线上质点的变形规律同当量的轴对称件相似,得到了盒形件凸缘区和悬空侧壁区应力的近似理论解析。该计算方法的可靠性得到了有限元模拟计算的验证,不仅为研究盒形件变形规律提供了一种有效的理论解析手段,而且为拉深智能化控制中的参数识别模型和预测模型的建立奠定了理论基础。     

分区压边拉深工艺改善矩盒形件成形研究

板料拉深过程中成形性能的优化是最重要的问题之一。通过有限元分析软件DYNAFORM对矩盒形件拉深成形过程进行模拟,研究了盒形件在整体压边圈恒压边力、分块压边圈恒压边力以及分块压边圈变压边力情况下的成形性能。模拟分析结果表明,分块压边下存在最优压边力分布,对每一分区加载随凸模位置变化的压边力类V型曲线,能最大程度的提高矩盒形件的拉深成形性能,为实现矩盒形件拉深过程的最优化提供思路,并在实践生产中指导复杂工件的工艺优化,最终改进工件的成形性能。     

浅谈盒形件的拉深

简要阐述了拉深盒形件时易出现的问题,从模具的设计制造、安装,材料的性能与下料形状等方面分析其原因和解决措施,并对盒形件的拉深规律进行探讨。     

盒形件无模充液拉深液压加载路径的研究

凹模型腔内的液体预胀形压力和工作压力是决定充液拉深过程中能否拉深出合格零件的重要工艺参数.通过采用Dynaform软件,对无模充液拉深盒形件工艺进行数字仿真,就液体压力参数对板料成形性能影响进行分析与研究.结果表明,合理地控制凹模型腔内液体加载路径和压力参数可以有效地提高板料的成形性能和成形件质量.并由液体压力所带来的摩擦保持效应可使成形件壁厚分布均匀,一次拉深的盒形件最大相对高度可达到4.25.     

盒形件拉深智能化控制实时识别及预测

在板材成形智能化控制的4个基本要素中,材料性能参数的实时识别及最优工艺参数的预测是最复杂的两个要素。识别和预测精度的高低,将直接影响智能化控制成功与否。以盒形件智能拉深控制为研究对象,建立了盒形拉深件的材料性能参数和摩擦因数的实时识别前馈神经网络,通过实时监测来实时识别所需要的材料性能参数,并预测最优的工艺参数,从而获得了较高的收敛精度。     

盒形件充液拉深成形工艺优化及试验研究

本文主要研究充液拉深成形技术在复杂异形长法兰类盒形件成形过程中的应用,首先对该类零件的材料进行了力学性能和成形性能测试分析,获取材料的成形极限,确定了充液拉深成形方案;建立了盒形件的有限元仿真模型,模拟了盒形件在充液拉深成形过程中材料的壁厚变化情况,通过成形缺陷分析对关键工艺参数低压充液时间TLP、整形时间TIP、最大压边力Fmax、液体流速Vel％,最大成形力Pmax及时效时间Tw等进行了重新设计,并通过数值模拟和试验验证相结合的方法优化了工艺参数;最终,完成了盒形件充液拉深成形流程再造,确定出最优的工艺参数,并成功实现盒形件的充液拉深成形,使其制造效率和产品质量大幅提升,为低塑性、难变形材料盒形件的批量制造奠定了工艺基础.     

Minimal Realization of Linear Graph Models for Multi-physics Systems

An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t...     

INTEGRAL EQUATION METHOD＇S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.     

Non-monotonic material contrast in scanning ion and scanning electron images

30 keV Ga⁺ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z₂, and shows a non-monotonic relationship between contrast and Z₂. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z₂, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory.     

Short-Term Relay Quality Prediction Algorithm Based on Long and Short-Term Memory

The fraction defective of semi-finished products is predicted to optimize the process of relay production lines, by which production quality and productivity ar...     

End-to-End Multiview Gesture Recognition for Autonomous Car Parking System

The use of hand gestures can be the most intuitive human-machine interaction medium.The early approaches for hand gesture recognition used device-based methods....     

Application of Feature Extraction through Convolution Neural Networks and SVM Classifier for Robust Grading of Apples

This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an...     

分布动态载荷识别的抗噪处理

针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性.     

基于MELTAC-N平台的核电厂安全级DCS环网研究与测试

针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

ANGULAR DISTORTION ALLOWABLE VALUE AND ASSESS METHOD OF WELD ON COKE TOWER

A graph as the new engineering method for estimate the safety of bulging deformation of coke tower is proposed. Through stresses analysis of circumferential weld of coke tower and comparing the stresses produced by pressure with heat stress of steady state, residual stress, bending stress produced by both itself weight and wind loads, it showed that the stresses produced by pressure on the angle distortion are the main factor of equivalent stress of the combined stress. After comparing four kinds of stress controlling conditions, the relation to stress with depth of angular distortion, grade of curvature of angular distortion and half of region of angular distortion has been inferred. Graph of deformation allowable value of coke tower for different condition by angular distortion and half of region of angular distortion has been plotted. The five steps for its engineering use have been explained. The lighter the grade of curvature is, the larger of bulge allowance, may be, and the bigger of depth of angular distortion may pose too. For the coke tower with a popular structure of Dg 5 400 mm×28 mm, the result by graph is nearly more than the result of two formulas formed by other research, the error is less than 7.0%. But, the graph can be easily applied to different size of angular distortion.