共查询到20条相似文献,搜索用时 93 毫秒
1.
基于聚苯乙烯泡沫塑料保温材料的应用和研究,综述了保温材料的研究现状,从影响保温材料保温性能的三大因素——耐火性能、导热率、吸水率进行具体分析;然后基于聚苯乙烯泡沫塑料保温材料的研究现状,概述了聚苯乙烯泡沫塑料的优势,并分析了其耐火性能和保温性能,发现聚苯乙烯泡沫塑料在保温方面效果显著;聚苯乙烯泡沫塑料保温材料可以应用于... 相似文献
2.
我厂设备和管道的保温一直采用岩棉毡和海泡石,但存在保温性能差、使用寿命短和施工不方便等缺点,再加上岩棉毡吸水后易因胀裂而使保温层脱落。海泡石为静电型无机隔热膏体,需采用涂抹法分层施工,故施工进度慢,材料损耗大,且冬季施工困难。为此,从1998年开始,我们在回收车间的鼓冷、脱硫、硫铵和粗苯等工段的设备和管道上使用了WBC型复合硅酸盐保温材料,取得了较为理想的效果。1复合硅酸盐保温材料的性能复合硅酸盐保温材料是以硅酸盐天然矿物为基料,多种轻质矿物为辅料,再掺配适量化学添加剂,应用静电原理制成的固体基… 相似文献
3.
综述了国内外各类保温材料和保温管道结构的技术现状及应用研究进展;分析了不同保温材料的隔热性能、力学性能、微观结构等特点,包括实心保温材料、无机及有机发泡材料、复合保温材料和相变储能材料;介绍了各类结构的输油管道的加工工艺、结构设计等特点,包括管中管结构、单壁管、技术管系统和复合保温软管;并对目前保温输油管道的材料及结构的应用和发展进行了讨论。 相似文献
4.
漂珠憎水隔热粉(膏)的加工工艺憎水隔热粉(膏)是新发展起来的一种新型防水保温材料,被广泛用于建筑及工业管道的防水保温工程,属高附加值深加工产品。粉料的加工工艺是先将漂珠烘干过筛(200目),滑石粉过筛(320目).然后按配合比(漂珠:滑石粉:憎水剂=... 相似文献
5.
6.
对绝热、保温材料的保温机理,纳米多孔保温材料制备、改性及应用进行了分析与综述,为新型轻质纳米多孔保温材料的研发提供一定的参考。SiO_2气凝胶绝热、保温性能良好,但SiO_2气凝胶强度低、韧性差而限制了其直接作为绝热保温材料应用于绝热、保温工程,因而SiO_2气凝胶的改性以增加其强度和韧性是未来一段时间的研究重点。 相似文献
7.
《中国石油和化工标准与质量》2013,(16):42-43
向油井注入高干度的蒸汽是提高油汽比的关键点。本文通过保温管线传热机理的研究;计算保温材料每千米热损失、蒸汽干度降低值;通过钛陶瓷保温材料和硅酸铝岩棉保温材料的保温性能、防水性能、机械性能、使用寿命的比较,可以看出钛陶瓷保温材料以上四方面性能均优于硅酸铝保温材料,是注汽管线保温材料的升级换代产品。 相似文献
8.
有机与无机建筑保温材料的优劣和选择 总被引:1,自引:0,他引:1
介绍了有机、无机建筑保温材料各自的优势及缺点.指出按我国南北气候的差异性,选择性地采取内外保温、有机与无机保温材料相结合的方式是未来建筑节能保温的发展趋势. 相似文献
9.
保温对地热单井换热性能的影响分析 总被引:3,自引:0,他引:3
建立了单井地热传热数学模型,模拟了单井地热流动换热过程,比较分析了不同保温材料及保温深度对采出水温度和取热功率的影响。结果表明:保温材料热导率和保温深度对系统取热功率有很大影响。当保温材料热导率为0.03 W/( m·K)和0.5 W/( m·K)时,平均取热功率分别 为732.08 kW和640.98 kW;采用热导率为0.03 W/( m·K)的保温材料,保温深度1000 m时流体进出口温差为10.33 K,保温深度为2000 m时流体进出口温差为15.98 K,保温深度为3000 m 时流体进出口温差为17.93 K。实际工程中,可以采用各种材料组合安装的形式对采出井进行保温,保温重点为井深较小处,这样既能保证采出水温,又能节约成本。 相似文献
10.
11.
以中草药中常见的中草药当归、甘草、芦荟为初始原料,从中提取出有效成份作为美自护肤霜的天然添加剂,研制成水包油型的膏霜类高级化妆品,探讨了配制工艺对美白护肤霜效果的影响,并对美自护肤霜的性能进行了评价,证明产品具有良好的美白功效,质量符合要求。 相似文献
12.
以常见的中草药当归、甘草、芦荟为初始原料,从中提取出有效成分作为美白护肤霜的天然添加剂,研制成水包油型的膏霜类高级化妆品,探讨了配制工艺对美白护肤霜效果的影响,并对美白护肤霜的性能进行了评价,证明产品具有良好的美白功效,质量符合要求。 相似文献
13.
F. A. El-Wakeil N. Z. Hassanen M. M. Morad S. B. El-Magoli 《Journal of the American Oil Chemists' Society》1982,59(3):150-151
The primary alcohols, ketones, aldehydes and part of the wax esters were used as fixatives for the odor in soap perfume. Statistical
analysis proved the sutiability of this fraction for this purpose. The hydrocarbons and the free fatty acid fractions were
used to replace carnauba wax in the production of an enriched cleansing cream. The triangle panel test proved that this fraction
could replace carnauba wax without affecting the quality of that type of cleansing cream. 相似文献
14.
黄芩苷防晒霜制备工艺的研究 总被引:2,自引:1,他引:1
将中草药黄芩的有效成分黄芩苷作为天然添加剂添加到防晒霜中,配制出水包油型的膏霜类黄芩苷防晒霜.通过考察乳化条件对乳化效果的影响和原料的添加量对防晒霜乳状液性质的影响,确定出较佳的制备工艺.实验结果表明,当搅拌速度为1 000 r/min,乳化温度为75℃~85℃时,乳化效果较好;当w(三乙醇胺)=0.2%~2.0%,w(E1802)=2.0%,w(防腐剂)=0.20%时,防晒霜乳状液性质稳定;当w(黄芩苷)=1.5%时,防晒霜的药理性能和颜色较好,可以制备出天然的性能较好的黄芩苷防晒霜. 相似文献
15.
16.
17.
18.
Vildan Aykan Emel Sezgin Zeynep B. Guzel‐Seydim 《European Journal of Lipid Science and Technology》2008,110(6):516-520
The purpose of this research was to determine the effects of different fat replacers on the sensory and texture attributes of vanillin‐flavored ice cream. Inulin is a fairly new fat replacer which has been proven to be a health promoter. Two vanilla ice cream formulations were produced using different ratios of inulin and Simplesse® as fat replacers to provide better flavor and textural properties. Aspartame and acesulfam‐K were used as sweeteners in the low‐calorie ice creams. Sensory and instrumental analyses were used to evaluate the texture quality of light (4.55%) (control group), low‐fat (2%) and fat‐free vanilla ice creams. The experimental mixes were significantly more viscous than the control mix due to the water binding capacity of carbohydrate‐ and protein‐based substances. The texture scores of the ice creams (sensory evaluation) paralleled the viscosity values. Ice creams manufactured with fat replacers were free of cooked‐milk flavor. The energy value of ice cream was reduced compared to full‐fat ice cream (207 kcal/100 g): by 75% for non‐fat ice cream, 71% for low‐fat ice cream and 41% for light ice cream. An increase in total solids in the mix resulted in better texture, a lower melting rate and better shape retention. 相似文献
19.
20.
Partial substitution of ammonium polyphosphate (APP) by manganese dioxide (MnO2) in polyamide 6 (PA-6) fire retarded with 20% of APP strongly increases the fire retardant effect. ‘Linear pyrolysis’ experiments, which are modified cone calorimeter tests, show an increase in the amount and an improvement of the shielding properties of the intumescent char formed on the surface of burning polymer. The enhancement of the yield of aliphatic–aromatic char stable to oxidation was observed in thermogravimetry under air. The fire retardant action of an APP/MnO2 mixture in PA-6 is twofold. On the one hand, this additive promotes involvement of the polymer in the charring and, on the other, the formed manganese phosphate glasses improve the thermo-insulating properties of the intumescent char on the surface of burning PA-6. 相似文献