Single-Walled Carbon Nanotubes for Flexible Electronics and Sensors

This article reviews the use of electronic quality single-walled carbon nanotubes grown via chemical vapor deposition （CVD） approaches at high temperatures as building blocks for fabricating flexible field-effect devices, such as thin-film transistors （TFTs） and chemical sensors. Dry transfer printing technique is developed for forming films of CVD nanotubes on low-temperature plastic substrates. Examples of TFTs with the use of nanotubes and thin dielectrics and hydrogen sensors with the use of nanotubes decorated with palladium nanoparticles are discussed in detail to demonstrate the promising potentiality of single-walled carbon nanotubes for building high performance flexible devices, which can find applications where traditional devices on rigid substrates are not suitable.     

Analysis of stress responsive genes induced by single-walled carbon nanotubes in BJ Foreskin cells

Nanotechnology is finding its use as a potential technology in consumer products, defense, electronics, and medical applications by exploiting the properties of nanomaterials. Single-walled carbon nanotubes are novel forms of these nanomaterials with potential for large applications. However, the toxicity studies on this material are not explored in detail and therefore limiting its use. It has been earlier reported that single-walled carbon nanotubes induces oxidative stress and also dictates activation of specific signaling pathway in keratinocytes. The present study explores the effect of single-walled carbon nanotubes on stress genes in human BJ Foreskin cells. The results show induction of oxidative stress in BJ Foreskin cells by single-walled carbon nanotubes and increase in stress responsive genes. The genes included inducible genes like HMOX1, HMOX2, and Cyp1B1. In addition we validated increase for four genes by SWCNT, namely ATM, CCNC, DNAJB4, and GADD45A by RT-PCR. Moreover results of the altered stress related genes have been discussed and that partially explains some of the toxic responses induced by single-walled carbon nanotubes.     

Method for patterning various nanomaterials: electrochemical deposition of patterned Ni thin films and their utilization as a strippable mask

We report an interesting approach for preparing micropatternings of nanomaterials, such as carbon nanotubes and TiO(2) nanoparticles. In the method, exfoliation of electrodeposited Ni thin films was the key process. After patterning indium thin oxide (ITO) plates with an insulating photoresist by conventional photolithography, Ni was electrodeposited on only the exposed ITO areas. The resulting substrates were evenly covered with nanomaterials by a drop cast method. By exfoliating the electrodeposited Ni thin films from the substrates, patterned nanomaterial films were formed.     

Hierarchical Three-Dimensional Layer-by-Layer Assembly of Carbon Nanotube Wafers for Integrated Nanoelectronic Devices

We report a general approach to overcome the enormous obstacle of the integration of CNTs into devices by bonding single-walled carbon nanotubes (SWNTs) films to arbitrary substrates and transferring them into densified and lithographically processable "CNT wafers". Our approach allows hierarchical layer-by-layer assembly of SWNTs into organized three-dimensional structures, for example, bidirectional islands, crossbar arrays with and without contacts on Si, and flexible substrates. These organized SWNT structures can be integrated with low-power resistive random-access memory.     

Selection of carbon nanotubes with specific chiralities using helical assemblies of flavin mononucleotide

The chirality of single-walled carbon nanotubes affects many of their physical and electronic properties. Current production methods result in nanotubes of mixed chiralities, so facile extraction of specific chiralities of single-walled carbon nanotubes is an important step in their effective utilization. Here we show that the flavin mononucleotide, a common redox cofactor, wraps around single-walled carbon nanotubes in a helical pattern that imparts efficient individualization and chirality selection. The cooperative hydrogen bonding between adjacent flavin moieties results in the formation of a helical ribbon, which organizes around single-walled carbon nanotubes through concentric pi-pi interactions between the flavin mononucleotide and the underlying graphene wall. The strength of the helical flavin mononucleotide assembly is strongly dependent on nanotube chirality. In the presence of a surfactant, the flavin mononucleotide assembly is disrupted and replaced without precipitation by a surfactant micelle. The significantly higher affinity of the flavin mononucleotide assembly for (8,6)-single-walled carbon nanotubes results in an 85% chirality enrichment from a nanotube sample with broad diameter distribution.     

Scanning electron microscopy imaging of single-walled carbon nanotubes on substrates

Scanning electron microscopy (SEM) plays an indispensable role in nanoscience and nanotechnology because of its high efficiency and high spatial resolution in characterizing nanomaterials.Recent progress indicates that the contrast arising from different conductivities or bandgaps can be observed in SEM images if single-walled carbon nanotubes (SWCNTs) are placed on a substrate.In this study,we use SWCNTs on different substrates as model systems to perform SEM imaging of nanomaterials.Substantial SEM observations are conducted at both high and low acceleration voltages,leading to a comprehensive understanding of the effects of the imaging parameters and substrates on the material and surface-charge signals,as well as the SEM imaging.This unified picture of SEM imaging not only furthers our understanding of SEM images of SWCNTs on a variety of substrates but also provides a basis for developing new imaging recipes for other important nanomaterials used in nanoelectronics and nanophotonics.     

Decoration of single-walled carbon nanotubes with Pt nanoparticles from an organometallic precursor

Carbon nanotubes (CNTs) are nanomaterials of high interest due to their unique structural, electrical, and mechanical properties. Carbon materials have been widely employed to support metallic nanoparticles for catalysis and electrochemical applications. In this work, we investigated the synthesis of platinum nanoparticles generated from the complex Pt₂(dba)₃ (tris(dibenzylideneacetone) diplatinum) and stabilized with a long alkyl chain amine, hexadecylamine (HDA) and supported on functionalized single-walled carbon nanotubes (SWCNTs). High resolution transmission electron microscopy (HRTEM) studies revealed isolated Pt nanoparticles (2?C3 nm) on SWCNTs. Powder X-ray diffraction (XRD) was used to assess the structure of Pt nanoparticles dispersed on SWCNTs assigned to Pt face-centered cubic (fcc). Additionally, infrared Fourier transform spectroscopy confirmed the presence of the stabilizer at the surface of the Pt nanoparticles even after the purification step and functional groups at the surface of pre-treated SWCNTs. This synthetic method may be an alternative route to prepare small size Pt nanoparticles supported on functionalized SWCNTs.     

Mo-Co catalyst nanoparticles: Comparative study between TiN and Si surfaces for single-walled carbon nanotube growth

Highly pure single-walled carbon nanotubes (SWNT) were synthesized by alcohol catalytic chemical vapor deposition on silicon substrates partially covered by a thin layer of TiN. The TiN coating selectively prevented the growth of carbon nanotubes. Field emission scanning electron microscopy and Raman spectroscopy revealed the formation of high purity vertically aligned SWNT in the Si region. X-ray Photoelectron Spectroscopy and Atomic Force Microscopy indicated that Co nanoparticles are present on the Si regions, and not on the TiN regions. This clearly explains the obtained experimental results: the SWNT only grow where the Co is presented as nanoparticles, i.e. on the Si regions.     

Coating carbon nanotubes with colloidal nanocrystals by combining an electrospray technique with directed assembly using an electrostatic field

A simple method that combines an electrospray technique with directed assembly using an electrostatic field was used for decorating carbon nanotubes (CNTs) with nanocrystals. Colloidal CdSe and Au nanocrystals were electrosprayed and assembled onto random CNTs and vertically aligned CNTs in a controlled manner. The high level of electrical charge on the electrosprayed aerosol nanocrystals was responsible for the assembly. The technique can be used to assemble various compositions of nanomaterials onto different substrates and provides a versatile route for producing novel hybrid nanostructures.     

Photothermal properties of inorganic nanomaterials as therapeutic agents for cancer thermotherapy

In recent years, gold (Au) nanoparticles (NPs) and single-walled carbon nanotubes (SWCNTs) have attracted significant attention as potent therapeutic agents for cancer thermotherapy. In this paper the photothermal properties of inorganic nanomaterials including porous silicon (PSi), titania (TiO2) nanotubes (NTs), TiO2 NPs, and multiwalled carbon nanotubes (MWCNTs), Au NPs and SWCNTs have been systematically investigated. PSi shows by far the largest temperature rise (deltaT), TiO2 NTs the second largest deltaT, and MWCNTs the smallest deltaT upon exposure to near-infrared (NIR) laser. The high photothermal effect of PSi has been found to be attributed to the high absorbance and the high surface-to-volume ratio due to the numerous micropores in PSi In addition, the factors affecting the photothermal effects of nanomaterials have been discussed. Our results suggest that PSi and TiO2 NTs are also potential therapeutic agents for cancer thermotherapy with excellent photothermal properties as well as high biocompatibility.     

DNA-linker-induced surface assembly of ultra dense parallel single walled carbon nanotube arrays

Ultrathin film preparations of single-walled carbon nanotube (SWNT) allow economical utilization of nanotube properties in electronics applications. Recent advances have enabled production of micrometer scale SWNT transistors and sensors but scaling these devices down to the nanoscale, and improving the coupling of SWNTs to other nanoscale components, may require techniques that can generate a greater degree of nanoscale geometric order than has thus far been achieved. Here, we introduce linker-induced surface assembly, a new technique that uses small structured DNA linkers to assemble solution dispersed nanotubes into parallel arrays on charged surfaces. Parts of our linkers act as spacers to precisely control the internanotube separation distance down to <3 nm and can serve as scaffolds to position components such as proteins between adjacent parallel nanotubes. The resulting arrays can then be stamped onto other substrates. Our results demonstrate a new paradigm for the self-assembly of anisotropic colloidal nanomaterials into ordered structures and provide a potentially simple, low cost, and scalable route for preparation of exquisitely structured parallel SWNT films with applications in high-performance nanoscale switches, sensors, and meta-materials.     

High-quality single-walled carbon nanotubes synthesis by hot filament CVD on Ru nanoparticle catalyst

We investigated the single-walled carbon nanotubes (SWCNTs) growth on Ru nanoparticle catalyst via hot filament assisted chemical vapor deposition (HFCVD) with two independent W filaments for the carbon precursor (methane) and the hydrogen dissociation respectively. The Ru nanoparticles were obtained following a two-step strategy. At first the growth substrate is functionalized by silanisation, then a self assembly of a ruthenium porphyrin complex monolayer on pyridine-functionalized metal oxide substrates. We have studied the impact of the filaments power and we optimized the SWCNTs growth temperature. The as grown SWCNTs were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Raman spectroscopy. It was found that the quality, density and the diameter of SWCNTs depends on the filament and growth temperature. Results of this study can be used to improve the understanding of the growth of SWCNTs by HFCVD.     

Electron transport in very clean, as-grown suspended carbon nanotubes

Single-walled carbon nanotubes have shown a wealth of quantum transport phenomena thus far. Defect-free, unperturbed single-walled carbon nanotubes with well behaved or tunable metal contacts are important for probing the intrinsic electrical properties of nanotubes. Meeting these conditions experimentally is non-trivial owing to numerous disorder and randomizing factors. Here we show that approximately 1-microm-long fully suspended single-walled carbon nanotubes grown in place between metal contacts afford devices with well defined characteristics over much wider energy ranges than nanotubes pinned on substrates. Various low-temperature transport regimes in true-metallic, small- and large-bandgap semiconducting nanotubes are observed, including quantum states shell-filling, -splitting and -crossing in magnetic fields owing to the Aharonov-Bohm effect. The clean transport data show a correlation between the contact junction resistance and the various transport regimes in single-walled-carbon-nanotube devices. Furthermore, we show that electrical transport data can be used to probe the band structures of nanotubes, including nonlinear band dispersion.     

Novel nanotube-on-insulator (NOI) approach toward single-walled carbon nanotube devices

We present a novel nanotube-on-insulator (NOI) approach for producing high-yield nanotube devices based on aligned single-walled carbon nanotubes. First, we managed to grow aligned nanotube arrays with controlled density on crystalline, insulating sapphire substrates, which bear analogy to industry-adopted silicon-on-insulator substrates. On the basis of the nanotube arrays, we demonstrated registration-free fabrication of both top-gated and polymer-electrolyte-gated field-effect transistors with minimized parasitic capacitance. In addition, we have developed a way to transfer these aligned nanotube arrays to flexible substrates successfully. Our approach has great potential for high-density, large-scale integrated systems based on carbon nanotubes for both micro- and flexible electronics.     

Direct synthesis of single-walled carbon nanotubes selectively suspended on tips of vertically aligned silicon nanostructures fabricated by hydrogen plasma etching

Here we present a method to synthesize single-walled carbon nanotubes (SWNTs) selectively suspended on tips of silicon-based nanostructure (Si-ns) templates. The Si-ns templates vertically aligned to the substrates are fabricated via an anisotropic etch process using reactive hydrogen plasmas, in which the etch-resistive nanomasks are the nanosized particles formed by thermal annealing of multi-layered catalytic thin films. After plasma etching, the nanosized self-masks remaining at the tips of the Si-ns directly serve as the catalysts for SWNT growth by thermal chemical vapour deposition. Consequently, the synthesized SWNTs are selectively suspended on the tips of the Si-ns, as revealed by characterizations using scanning electron microscopy and resonance Raman spectroscopy. This methodology provides a simple and straightforward approach to assemble two different nanomaterials, i.e., Si-ns and suspended SWNTs, together as a building block for constructing nanodevices for possible applications.     

Peptide‐Based Nanotubes and Their Applications in Bionanotechnology

In nature, biological nanomaterials are synthesized under ambient conditions in a natural microscopic‐sized laboratory, such as a cell. Biological molecules, such as peptides and proteins, undergo self‐assembly processes in vivo and in vitro, and these monomers are assembled into various nanometer‐scale structures at room temperature and atmospheric pressure. The self‐assembled peptide nanostructures can be further organized to form nanowires, nanotubes, and nanoparticles via their molecular‐recognition functions. The application of molecular self‐assemblies of synthetic peptides as nanometer‐scale building blocks in devices is robust, practical, and affordable due to their advantages of reproducibility, large‐scale production ability, monodispersity, and simpler experimental methods. It is also beneficial that smart functionalities can be added at desired positions in peptide nanotubes through well‐established chemical and peptide syntheses. These features of peptide‐based nanotubes are the driving force for investigating and developing peptide nanotube assemblies for biological and non‐biological applications.     

A kinetic Monte Carlo analysis for the production of singularly tethered carbon nanotubes

Nanoparticles that possess a single covalent tether to either another particle or a surface play an increasingly important role in nanotechnology, serving as a foundation for aggregation-based plasmonic sensors, chemically assembled framework structures, and scanning probe tips. Using a theoretical approach, we explore the reaction conditions necessary to maximize singular tethering for several cases of homogeneously dispersed nanoparticles, with a particular focus on single-walled carbon nanotubes. In the limit of particles of monodisperse size and equal site reactivity, the number of tethers versus the reaction conversion is statistically described by the well-known binomial distribution, with a variance that is minimal for the single tether case. However, solutions of nanoparticles often deviate from this ideal, and reaction events can introduce steric hindrance to neighboring sites or alter particle electronic properties, both of which can influence local reactivity. In order to study these cases we use the electron transfer reactions of single-walled carbon nanotubes. We find that the distribution in the number of monofunctional tubes, as a function of conversion, is largely dependent on the distribution of nanotube rate constants, and therefore tube chiralities, in the initial solution. As a contemporary example, we examine the implications of this result on the metallic-semiconductor separation of carbon nanotubes using electron transfer chemistry.     

Direct imaging of single-walled carbon nanotubes in cells

The development of single-walled carbon nanotubes for various biomedical applications is an area of great promise. However, the contradictory data on the toxic effects of single-walled carbon nanotubes highlight the need for alternative ways to study their uptake and cytotoxic effects in cells. Single-walled carbon nanotubes have been shown to be acutely toxic in a number of types of cells, but the direct observation of cellular uptake of single-walled carbon nanotubes has not been demonstrated previously due to difficulties in discriminating carbon-based nanotubes from carbon-rich cell structures. Here we use transmission electron microscopy and confocal microscopy to image the translocation of single-walled carbon nanotubes into cells in both stained and unstained human cells. The nanotubes were seen to enter the cytoplasm and localize within the cell nucleus, causing cell mortality in a dose-dependent manner.     

Gaseous Nanocarving‐Mediated Carbon Framework with Spontaneous Metal Assembly for Structure‐Tunable Metal/Carbon Nanofibers

Vapor phase carbon (C)‐reduction‐based syntheses of C nanotubes and graphene, which are highly functional solid C nanomaterials, have received extensive attention in the field of materials science. This study suggests a revolutionary method for precisely controlling the C structures by oxidizing solid C nanomaterials into gaseous products in the opposite manner of the conventional approach. This gaseous nanocarving enables the modulation of inherent metal assembly in metal/C hybrid nanomaterials because of the promoted C oxidation at the metal/C interface, which produces inner pores inside C nanomaterials. This phenomenon is revealed by investigating the aspects of structure formation with selective C oxidation in the metal/C nanofibers, and density functional theory calculation. Interestingly, the tendency of C oxidation and calculated oxygen binding energy at the metal surface plane is coincident with the order Co > Ni > Cu > Pt. The customizable control of the structural factors of metal/C nanomaterials through thermodynamic‐calculation‐derived processing parameters is reported for the first time in this work. This approach can open a new class of gas–solid reaction‐based synthetic routes that dramatically broaden the structure‐design range of metal/C hybrid nanomaterials. It represents an advancement toward overcoming the limitations of intrinsic activities in various applications.     

Self-assembly of single-walled carbon nanotubes into multiwalled carbon nanotubes in water: molecular dynamics simulations

We report discoveries from a series of molecular dynamics simulations that single-walled carbon nanotubes, with different diameters, lengths, and chiralities, can coaxially self-assemble into multiwalled carbon nanotubes in water via spontaneous insertion of smaller tubes into larger ones. The assembly process is tube-size-dependent, and the driving force is primarily the intertube van der Waals interactions. The simulations also suggest that a multiwalled carbon nanotube may be separated into single-walled carbon nanotubes under appropriate solvent conditions. This study suggests possible bottom-up self-assembly routes for the fabrication of novel nanodevices and systems.