共查询到20条相似文献,搜索用时 62 毫秒
1.
中国机床工具工业协会滚动功能部件分会五届三次理事会9月 2 1~ 2 5日在海口召开。 2 9个单位的 48名代表出席会议。会议的中心议题是 :抓住黄金发展机遇 ,努力做强滚动功能部件产业。出席会议的董事长、总经理和厂长们围绕这一中心展开深入大讨论 ,取得了许多共识。针对目前行业普遍存在的共性问题 ,会议专门研究了组建行业“滚动功能部件工程技术中心”的相关事宜。全国大约有 3 5家以上的企业从事滚动功能部件生产 (包括合资企业、国有企业、股份制企业、民营企业 ) ,其产品除滚珠丝杠、滚动直线导轨外 ,还包括CNC直线运动装置、滚珠… 相似文献
2.
正2014年4月17日,中国机床工具工业协会滚动功能部件分会第八届会员大会暨八届一次理事会在青岛召开。中国机床工具工业协会组联部主任张彦君和传媒部《中国机床工具》报主编阎晓彦参加会议。张彦君主任就行业2013年及2014年1~2月经济运行情况在会上做了通报,并把机床协会今后的重点工作思路做了介绍。除两家会员企业没出席以外,其余会员全部到会。本次会议的主要任务是换届选举,滚动功能部件分会41家会员单位,实到39家,将选出滚动功能部件分会第八届理事会理事长单位、 相似文献
3.
阎晓彦 《机械工人(冷加工)》2006,(3):16-17
“滚动功能部件用户调查”结束了,收获非常之大。我们不仅为滚动功能部件生产厂家收集到了许多相关信息和数据,而且也收集到了机床厂家给国内滚动功能制造厂家提的建议。虽然,每个人的话语不多,但提得很直接,很简练,很到位。下面是我们从众多问卷中挑选的比较有代表性的一些,有善意的批评,也有诚恳的表扬,供企业参考。肯定会有一种与机床厂家近距离接触的感觉。主持人阎晓彦 相似文献
4.
我国滚动功能部件产业现状分析 总被引:2,自引:2,他引:2
滚动功能部件作为机床四大主要配套部件,在整个数控机床的产业链中具有重要地位.文章主要探讨了国产滚动功能部件的企业状况、市场前景、发展瓶颈等方面,并提出了一些解决问题的思路和方法. 相似文献
5.
2008年9月24日山东博特精工股份有限公司(原济宁丝杠厂)滚动部件性能试验室被中国机械工业联合会评定为《机械工业滚动功能部件工程实验室》,项目编号为2008SB-07—20。2008年10月国家标准委员会批准成立“全国金属切削机床标准化技术委员会滚动丝杠副工作小组”,博特公司为秘书长单位。山东博特精工股份有限公司是滚动功能部件专业化生产企业,已有40多年生产历史,长期进行滚动功能部件的开发研究。 相似文献
6.
吴晓兰 《机械工人(冷加工)》2011,(15):14-16
"高档数控机床与基础制造装备科技重大专项"这一开创性的工作展开以来,取得了一批阶段性成果。为高档数控机床配套的功能部件的研发也取得一定进展,为主机的全面配套奠定了基础。为了给滚动功能部件企业提供一个与主机厂直接对话的机会,本次大会特别安排了由部分第二届滚动功能部件用户调查用户满意品牌获奖企业畅谈企业未来发展。 相似文献
7.
8.
朱光明 《机械工人(冷加工)》2010,(20):24-24
2010年8月28~9月3日,中国机床工具工业协会滚动功能部件分会第七届二次理事会在辽宁丹东召开,《金属加工(冷加工)》杂志记者应邀参加了会议。来自滚动功能部件分会的24家理事会员单位参加了此次会议,各会员单位针对2011年的行业发展情况进行了发言、讨论。 相似文献
9.
正"滚动功能部件专项产品测评发布会"于4月11日在CCMT 2018展会上成功召开。工信部装备工业司副巡视员王建宇、调研员韩行,中国机床工具工业协会执行副理事长郭长城、行业部主任娄晓钟,滚动功能部件分会理事长赵甲宝,南京理工大学冯虎田教授,以及参与测评的企业负责人、04专项的专家和滚动功能部件分会会员单位代表、媒体记者共80多人参加了会议。滚珠丝杠、直线导轨是数控机床非常重要的功能部件,其性能和质量 相似文献
10.
11.
Effect of rolling ratio on groove-section profile ring rolling 总被引:2,自引:0,他引:2
Ring rolling is an advanced plastic forming technique which is used to manufacture precise seamless rings. Rolling ratio is
regarded as a decisive parameter for the ring rolling process because it decides the blank dimension, reflects the ring deformation
degree and influences the forming results. However, its importance for the ring rolling process is always neglected. In this
paper, the effect of rolling ratio on the groove-section profile ring rolling is firstly investigated. The relationships between
rolling ratio and blank dimension, rolling ratio and ring deformation degree are theoretically studied and a theoretical value
range of rolling ratio is proposed. Then, with FE simulation, the influences of rolling ratio on the forming results are revealed.
Based on comparison and experimental verification, a reasonable value range of rolling ratio is determined. 相似文献
12.
14.
R.V. Vyrabov 《Tribology International》1986,19(5)
It has been established by many investigators that with a small side slip angle the braking force of an elastic wheel, unlike the traction force, can cause an increase in the lateral force compared with the force arising with the same slip angle but in conditions of pure slip. The range within which the increasing braking force is accompanied by an increase in the lateral force and, therefore, an increase in resistance to the side slip, may be very broad. Attempts have been made by several scientists to explain this anomaly. This paper represents an attempt to discover the factors behind this phenomenon more completely. 相似文献
15.
S. Serajzadeh 《The International Journal of Advanced Manufacturing Technology》2008,35(9-10):859-866
Temperature variations of work-rolls in the process of hot rolling of slabs were analyzed by solving heat conduction equation with time-dependent boundary conditions. The Raylieght-Ritz and the finite-element methods were employed to solve the governing equation. To improve the accuracy, the thermal relationship between rolling metal and work-rolls was taken into account as well as the effects of different parameters such as interface heat transfer coefficient, rolling speed, and slab initial temperature were considered in the calculations. To verify the employed model, a comparison was made between the predicted and the recorded time-temperature history and good agreement was observed. Modelling results show that the interface heat transfer coefficient and rolling speed are important factors that vary effectively the temperature field within the work-roll. In addition, the interface heat transfer coefficient is affected by the other parameters and factors such as flow stress behavior of the metal being rolled and initial temperature of metal. Therefore, in order to determine an accurate temperature field within the work-rolls, flow behavior and temperature distribution in the rolling metal should also be calculated at the same time. 相似文献
16.
介绍了航空用毛巾的包装形式、包装现状和国际要求,利用TRIZ冲突解决原理进行概念设计,提出用机器代替手工包装。通过实验得出试验优化参数。 相似文献
17.
在分析冷轧加工原理的基础上,提出渐开线(直齿、螺旋齿)零件冷滚轧的设计原理.介绍了毛坯零件工艺参数的选定及滚轧轮的设计参数的计算. 相似文献
18.
The influence of factors such as the following on the frictional and thermal characteristics of a spindle is assessed: the spindle speed, its load, the preliminary tension in the bearings, the lubrication method, the lubricant viscosity, and the heat transfer 相似文献
19.
20.
阐述渐开线螺旋花键的滚压原理、坯料计算、工装设计及材料的选择,并研究滚压加工。实践表明,采用滚压技术 所加工的渐开线螺旋花键,不仅极大提高生产效率,且制件的质量也大为提高。 相似文献