Gamma irradiation of pharmaceutical compounds, nitroimidazoles, as a new alternative for water treatment

The main objectives of this study were: (1) to investigate the decomposition and mineralization of nitroimidazoles (Metronidazole [MNZ], Dimetridazole [DMZ], and Tinidazole [TNZ]) in waste and drinking water using gamma irradiation; (2) to study the decomposition kinetics of these nitroimidazoles; and (3) to evaluate the efficacy of nitroimidazole removal using radical promoters and scavengers. The results obtained showed that nitroimidazole concentrations decreased with increasing absorbed dose. No differences in irradiation kinetic constant were detected for any nitroimidazole studied (0.0014-0.0017 Gy⁻¹). The decomposition yield was higher under acidic conditions than in neutral and alkaline media. Results obtained showed that, at appropriate concentrations, H₂O₂ accelerates MNZ degradation by generating additional HO; however, when the dosage of H₂O₂ exceeds the optimal concentration, the efficacy of MNZ degradation is reduced. The presence of t-BuOH (HO radical scavenger) and thiourea (HO, H and e_aq⁻ scavenger) reduced the MNZ irradiation rate, indicating that degradation of this pollutant can take place via two pathways: oxidation by HO radicals and reduction by e_aq⁻ and H. MNZ removal rate was slightly lower in subterranean and surface waters than in ultrapure water and was markedly lower in wastewater. Regardless of the water chemical composition, MNZ gamma irradiation can achieve i) a decrease in the concentration of dissolved organic carbon, and ii) a reduction in the toxicity of the system with higher gamma absorbed dose.     

The effect of nitrate, bicarbonate and natural organic matter on the degradation of sunscreen agent p-aminobenzoic acid by simulated solar irradiation

Our experiments revealed that a model sunscreen agent, p-aminobenzoic acid (PABA), can be effectively transformed through reactions that are mediated by simulated solar irradiation. We systematically explored the effects of nitrate ions, bicarbonate and different types of natural organic matter (NOM) on the degradation of PABA by simulated solar irradiation. Experimental data suggest that these components ubiquitous in nature water have different influence on the rates of the photoinduced removal of PABA. Products were extracted and analyzed using LC/MS and a total of four products probably resulting from OH and NO₂ radicals attack were identified and the possible reaction pathways were proposed. The findings in this study provide useful information for understanding the environmental transformation of sunscreen agent in aquatic system.     

Evaluation of UV/H2O2 treatment for the oxidation of pharmaceuticals in wastewater

Advanced oxidation treatment using low pressure UV light coupled with hydrogen peroxide (UV/H₂O₂) was evaluated for the oxidation of six pharmaceuticals in three wastewater effluents. The removal of these six pharmaceuticals (meprobamate, carbamazepine, dilantin, atenolol, primidone and trimethoprim) varied between no observed removal and >90%. The role of the water quality (i.e., alkalinity, nitrite, and specifically effluent organic matter (EfOM)) on hydroxyl radical (OH) exposure was evaluated and used to explain the differences in pharmaceutical removal between the three wastewaters. Results indicated that the efficacy of UV/H₂O₂ treatment for the removal of pharmaceuticals from wastewater was a function of not only the concentration of EfOM but also its inherent reactivity towards OH. The removal of pharmaceuticals also correlated with reductions in ultraviolet absorbance at 254 nm (UV₂₅₄), which offers utilities a surrogate to assess pharmaceutical removal efficiency during UV/H₂O₂ treatment.     

Degradation of selected pharmaceuticals in aqueous solution with UV and UV/H2O2

The degradation of four pharmaceutical compounds (PhACs), ibuprofen (IBU), diphenhydramine (DP), phenazone (PZ), and phenytoin (PHT) was investigated via ultraviolet (UV) photolysis and UV/H₂O₂ process with a low-pressure (LP) UV lamp. For each PhAC tested, direct photolysis quantum yields at 254 nm were found to be ranging from 6.32 × 10⁻² to 2.79 × 10⁻¹ mol E⁻¹ at pH 7. The second-order rate constants of the reaction between the PhACs and OH were determined to be from 4.86 × 10⁹ to 6.67 × 10⁹ M⁻¹ s⁻¹ by using a competition kinetic model which utilized para-chlorobenzoic acid (pCBA) as a reference compound. The overall effect of OH radical scavenging from humic acid (HA) and anions HCO₃⁻, NO₃⁻ was measured utilizing R_OH,UV method through examining the aqueous photodegradation of pCBA as a probe compound. Moreover, these fundamental direct and indirect photolysis parameters were applied in the model prediction for oxidation rate constants of the PhACs in UV/H₂O₂ process. It was found that the predicted oxidation rate constants approximated the observed ones. The results indicated that the new R_OH,UV probe compound method was applicable for measuring background OH radical scavenging effects in water treatment process of UV/H₂O₂. Furthermore, by GC-MS analysis, most of the intermediates created during the photodegradation of the selected PhACs in UV/H₂O₂ process were identified. For the photodegradation of PZ, a competition mechanism existed between the direct UV photolysis and the oxidation of OH. An appropriate dosage of H₂O₂ could hinder the occurrence of the direct photolysis.     

Effect of ozone exposure on the oxidation of trace organic contaminants in wastewater

Three tertiary-treated wastewater effluents were evaluated to determine the impact of wastewater quality (i.e. effluent organic matter (EfOM), nitrite, and alkalinity) on ozone (O₃) decomposition and subsequent removal of 31 organic contaminants including endocrine disrupting compounds, pharmaceuticals, and personal care products. The O₃ dose was normalized based upon total organic carbon (TOC) and nitrite to allow comparison between the different wastewaters with respect to O₃ decomposition. EfOM with higher molecular weight components underwent greater transformation, which corresponded to increased O₃ decomposition when compared on a TOC basis. Hydroxyl radical (OH) exposure, measured by parachlorobenzoic acid (pCBA), showed that limited OH was available for contaminant destruction during the initial stage of O₃ decomposition (t < 30 s) due to the effect of the scavenging by the water quality. Advanced oxidation using O₃ and hydrogen peroxide did not increase the net production of OH compared to O₃ under the conditions studied. EfOM reactivity impacted the removal of trace contaminants when evaluated based on the O₃:TOC ratio. Trace contaminants with second order reaction rate constants with O₃ (kO3) > 10⁵ M⁻¹ s⁻¹ and OH (k_OH) > 10⁹ M⁻¹ s⁻¹, including carbamazepine, diclofenac, naproxen, sulfamethoxazole, and triclosan, were >95% removed independent of water quality when the O₃ exposure () was measurable (0-0.8 mg min/L). O₃ exposure would be a conservative surrogate to assess the removal of trace contaminants that are fast-reacting with O₃. Removal of contaminants with and k_OH > 10⁹ M⁻¹ s⁻¹, including atrazine, iopromide, diazepam, and ibuprofen, varied when O₃ exposure could not be measured, and appeared to be dependent upon the compound specific k_OH. Atrazine, diazepam, ibuprofen and iopromide provided excellent linear correlation with pCBA (R² > 0.86) making them good indicators of OH availability.     

Evaluation of enhanced coagulation pretreatment to improve ozone oxidation efficiency in wastewater

Enhanced coagulation (EC) using ferric chloride was evaluated as a pretreatment process to improve the efficiency of ozone (O₃) for the oxidation of trace organic contaminants in wastewater. At the applied dosages (10-30 mg/L as Fe), EC pretreatment removed between 10 and 47% of the dissolved organic carbon (DOC) from the three wastewaters studied. Size exclusion chromatography (SEC) showed that EC preferentially removed higher apparent molecular weight (AMW) compounds. Subsequent O₃ testing was performed using an O₃:DOC ratio of 1. Results showed that O₃ exposures were similar even though the required doses were reduced by 10-47% by the EC pretreatment process. Hydroxyl radical (HO) exposure, measured by parachlorobenzoic acid (pCBA), showed 10% reduction when using a FeCl₃ dose of 30 mg/L, likely due to the lower O₃ dose and decreased production of HO during the initial phase of O₃ decomposition (t < 30 s). The oxidation of 13 trace organic contaminants (including atenolol, carbamazepine, DEET, diclofenac, dilantin, gemfibrozil, ibuprofen, meprobamate, naproxen, primidone, sulfamethoxazole, triclosan, and trimethoprim) was evaluated after EC and O₃ treatment. EC was ineffective at removing any of the contaminants, while O₃ oxidation reduced the concentration of compounds according to their reaction rate constants with O₃ and HO.     

The effect of electrode material on the generation of oxidants and microbial inactivation in the electrochemical disinfection processes

Electrochemical disinfection has gained increasing attention as an alternative for conventional drinking water treatment due to its high effectiveness and environmental compatibility. The most common method of electrochemical disinfection is the use of electro-generated oxidants, such as active chlorine and reactive oxygen species, as disinfectants. This study examined the role of electrode material on the generation of oxidants, and elucidated the different reaction pathways for generating individual oxidants by employing boron-doped diamond (BDD), Ti/RuO₂, Ti/IrO₂, Ti/Pt-IrO₂, and Pt as anode materials. The efficiency of OH production, as determined by para-chlorobenzoic acid (pCBA) degradation, was in the order of BDD ? Ti/RuO₂ ≈ Pt. No significant production of OH was observed at Ti/IrO₂ and Ti/Pt-IrO₂. The OH was found to play a key role in O₃ generation at BDD, but not at the other electrodes. The production of active chlorine was in the order of Ti/IrO₂ > Ti/RuO₂ > Ti/Pt-IrO₂ > BDD > Pt. The large difference in this order from that of ROS was attributed to the difference in the electrocatalytic activity of each electrode material toward the production of active chlorine, as evidenced by linear sweep voltammetry (LSV) measurements. In addition, the characteristics of microbial inactivation as a function of electrode material were examined under the presence of an inert electrolyte, using Escherichia coli as an indicator microorganism.     

Semicontinuous Fenton oxidation of phenol in aqueous solution. A kinetic study

This work investigates the Fenton oxidation of phenol in a semicontinuous reactor where the overall amount of H₂O₂ is distributed as a continuous feed upon the reaction time. The experiments were carried out at 25 °C and atmospheric pressure, with 100 mg/L initial phenol concentration and iron dosages from 1 to 100 mg/L. H₂O₂ aqueous solution was continuously fed during 4 h reaction time up to an overall dose varying within the range of 500-5000 mg/L. The results in terms of evolution of phenol, H₂O₂ and intermediates, as well as TOC abatement were compared with those obtained in conventional batch operation. It was found that the oxidation rates for phenol and intermediates were lower when adding the H₂O₂ continuously. However, a higher abatement of TOC was reached at the end of the 4-h reaction time, in spite of a similar overall H₂O₂ consumption. This is the result of a more efficient OH generation throughout the semicontinuous process, favouring the reaction with the organic species and reducing the occurrence of competitive scavenging reactions involving Fe²⁺, H₂O₂ and OH. Two kinetic models were proposed, one for describing the evolution of phenol, aromatics and H₂O₂ and the other for TOC. The influence of the operating conditions on the kinetic constants was also studied, looking for the optimal conditions in terms of both, environmental and economic points of view.     

Degradation of atrazine in aqueous medium by electrocatalytically generated hydroxyl radicals. A kinetic and mechanistic study

Oxidative degradation of atrazine by hydroxyl radicals (OH) was studied in aqueous medium. OH were formed in situ from electrochemically generating Fenton's reagent by an indirect electrochemical advanced oxidation process. Identification and evolution of seven main aromatic metabolites and four short-chain carboxylic acids were performed by using liquid chromatography analyses. Total organic carbon (TOC) and ionic chromatography were used in order to evaluate the mineralization efficiency of treated aqueous solutions. A high mineralization rate of 82% (never reported until now) was obtained. The oxidative degradation of cyanuric acid, the ultimate product of atrazine degradation, was highlighted for the first time. The absolute rate constant of the reaction between atrazine and hydroxyl radicals was evaluated by competition kinetics method as (2.54 ± 0.22) × 10⁹ M⁻¹ s⁻¹. Considering all oxidation reaction intermediates and end products a general reaction sequence for atrazine degradation by hydroxyl radicals was proposed.     

Solar photo-Fenton degradation of nalidixic acid in waters and wastewaters of different composition. Analytical assessment by LC-TOF-MS

This work assessed the solar photo-Fenton degradation of nalidixic acid (NXA), a quinolone antibacterial agent, in several different aqueous solutions. It has been proven that the composition of the water clearly affects the efficiency of the photo-Fenton process. The presence of chlorine ions induces the concurrence of different mechanisms involving Cl and Cl₂⁻ radicals, which slow down the process. Up to 35 transformation products (TPs) were identified and their structures characterized by accurate LC-TOF-MS mass measurements during treatment of the different model waters. Photocatalytic degradation was thus observed to proceed mainly through the attack of the hydroxyl radicals on the double bond C₍₂₎C₍₃₎ which induce further ring opening. All the TPs identified persisted after total degradation of NXA. NXA in real pharmaceutical effluent was treated by photo-Fenton as a first stage before biological treatment. As NXA has been demonstrated to be recalcitrant to biological treatment, photo-Fenton treatment of the effluent was continued until its total degradation. Although NXA was efficiently degraded, LC-MS analyses demonstrated that some of the TPs identified after the photo-Fenton treatment were also recalcitrant to biological treatment, persisting after the combined treatment. These results show that analytical assessment of photocatalytic water treatments is essential to assure they are functioning as intended.     

Effectiveness of different oxidizing agents for removing sodium dodecylbenzenesulphonate in aqueous systems

The present study investigates the efficacy of various oxidizing treatments (ClO⁻, ClO₂, KMnO₄, O₃, O₃/H₂O₂, O₃/activated carbon) to remove from waters sodium dodecylbenzenesulphonate (SDBS), considered as model surfactant. Results obtained show that the use of ClO⁻ and ClO₂ does not cause appreciable SDBS degradation. Additionally, in the case of ClO⁻, trihalomethanes are generated, increasing system toxicity. Because the reaction kinetics between SDBS and KMnO₄ is very slow, a decrease in contaminant concentration is not observed, even at very acid pH values. SDBS reactivity with ozone is very low, with a kinetic constant (kO3) of 3.68 M⁻¹ s⁻¹, but its reactivity with HO radicals is very high (k_OH = 1.16 × 10¹⁰ M⁻¹ s⁻¹), therefore O₃/H₂O₂ and O₃/activated carbon, which can also generate HO, appear as promising advanced oxidation processes to remove this contaminant from waters. The method based on ozone and activated carbon was the only process studied that produced both an increase in SDBS removal rate (due to the generation of HO radicals in the O₃-PAC or O₃-GAC interaction) and a considerable reduction in the concentration of dissolved organic carbon in the system due to the PAC adsorbent properties.     

Trimethoprim: kinetic and mechanistic considerations in photochemical environmental fate and AOP treatment

Trimethoprim (TMP), a bacteriostatic antibiotic, has recently been detected in wastewater and surface waters. In this study the sunlight mediated photochemical fate, and treatment using advanced oxidation and reduction (free radical) processes, have been investigated with respect to their effect on TMP. Photochemical fate, in the presence of humic acid, and advanced oxidation treatment both involve the hydroxyl radical (OH) as one of the reactive species of interest. Another reactive oxygen species, singlet oxygen (¹O₂), may also be important in the photochemical fate of TMP. The bimolecular reaction rate constants of TMP with ¹O₂ and OH were evaluated to be (3.2 ± 0.2) × 10⁶ M⁻¹ s⁻¹ and 8.66 × 10⁹ M⁻¹ s⁻¹, respectively. The reaction kinetics for the sub-structural moieties of TMP, 1,2,3-trimethoxybenzene (TMBz) and 2,4-diaminoprimidine (DAP), was evaluated to facilitate an understanding of the loss mechanisms. For TMBz and DAP the reaction rate constants with ¹O₂ were <1.0 × 10⁴ and (3.0 ± 0.1) × 10⁶ M⁻¹ s⁻¹, while with OH they were 8.12 × 10⁹ and 1.64 × 10⁹ M⁻¹ s⁻¹, respectively. The data suggests that the ¹O₂ attacks the DAP and the OH radical attacks the TMBz moiety. However, for TMP, ¹O₂ and OH reactions accounted for only ∼19% and ∼6%, of its total photodegradation, respectively. Therefore, the reaction of TMP with excited state natural organic matter is postulated as a significant degradation pathway for the loss of TMP in sunlit waters containing natural organic matter. There was no effect of pH on the direct or indirect photolysis of TMP. To complete the study for reductive treatment processes, the solvated electron reaction rates for the destruction of TMP, TMBz and DAP were also evaluated. The absolute bimolecular reaction rates obtained were, (13.6 ± 0.01) × 10⁹, (6.36 ± 0.11) × 10⁷ and (10.1 ± 0.01) × 10⁹ M⁻¹ s⁻¹, respectively.     

Photolytic reaction mechanism and impacts of coexisting substances on photodegradation of bisphenol A by Bi2WO6 in water

Bi₂WO₆ displayed great photolytic degradation efficiency to bisphenol A (BPA) under simulated solar light irradiation but its reaction mechanism and the impacts of coexisting substances on the degradation remain unclear. In present study, the reaction mechanism was investigated using DMPO spin-trapping ESR spectra and experiments with scavengers of hydroxyl radicals (OH) and holes. The results supported that hole oxidation mainly governed the photodegradation process. As a common humic substance in natural water, humic acid accelerated the degradation of BPA when its concentration was 1 mg/L, while the photodegradation was impeded with the increase of humic acid concentration in the range of 5-20 mg/L. Almost all anions, including NO₃⁻, HCO₃⁻, Cl⁻, SO₄²⁻ inhibited the degradation of BPA by Bi₂WO₆ and their inhibition effects followed the order of SO₄²⁻ > Cl⁻ > HCO₃⁻ > NO₃⁻. Cations of Na⁺, K⁺, Ca²⁺ and Mg²⁺ displayed slight suppressing effect on BPA degradation mainly due to the impact of Cl⁻ coexisting in the solution. However, Cu²⁺ hindered the BPA photodegradation heavily. Fe³⁺ and H₂O₂ affected the photodegradation in a complicated way: they suppressed or promoted the photodegradation depending on their concentrations. This could be the result of competition between photolyitc hole generated by Bi₂WO₆ and OH produced by Fe³⁺ or H₂O_2.     

Photochemical fate of atorvastatin (lipitor) in simulated natural waters

Cholesterol-lowering statin drugs are among the most frequently prescribed for reducing human blood cholesterol and they have been detected as contaminants in natural waters. In this study the photochemical behavior of atorvastatin (lipitor) was investigated at two different concentrations of 35.8 μM (20 mg L⁻¹) and 35.8 nM (20 μg L⁻¹) using a solar simulator and a UV reactor. Photochemical fate in natural waters can be described in most cases by the sum of the loss due to hydrolysis, direct photolysis, and, reaction with hydroxyl radical (OH), singlet oxygen (¹O₂) (or O₂ (¹D)), and excited state dissolved organic matter (DOM). The absolute bimolecular reaction rate constant with OH was measured, using pulsed radiolysis, (1.19 ± 0.04) × 10¹⁰ M⁻¹ s⁻¹. The reaction rate constant of ¹O₂ was determined to be (3.1 ± 0.2) × 10⁸ M⁻¹ s⁻¹. Under the experimental conditions used, at high atorvastatin concentration (35.8 μM) the contribution of singlet oxygen (¹O₂) to the photodegradation of atorvastatin in natural waters was higher than that of hydroxyl radical, and accounted for up to 23% of the loss in aqueous solutions. Whereas, at a concentration of 35.8 nM, ¹O₂ (and OH) both played a minor role in the removal of this compound. Lastly, it also appears that atorvastatin reacts with ³DOM* contributing to its loss in simulated natural waters.     

Degradation mechanisms and kinetic studies for the treatment of X-ray contrast media compounds by advanced oxidation/reduction processes

The presence of iodinated X-ray contrast media compounds (ICM) in surface and ground waters has been reported. This is likely due to their biological inertness and incomplete removal in wastewater treatment processes. The present study reports partial degradation mechanisms based on elucidating the structures of major reaction by-products using γ-irradiation and LC-MS. Studies conducted at concentrations higher than observed in natural waters is necessary to elucidate the reaction by-product structures and to develop destruction mechanisms. To support these mechanistic studies, the bimolecular rate constants for the reaction of OH and e⁻_aq with one ionic ICM (diatrizoate), four non-ionic ICM (iohexol, iopromide, iopamidol, and iomeprol), and the several analogues of diatrizoate were determined. The absolute bimolecular reaction rate constants for diatrizoate, iohexol, iopromide, iopamidol, and iomeprol with OH were (9.58 ± 0.23)×10⁸, (3.20 ± 0.13)×10⁹, (3.34 ± 0.14)×10⁹, (3.42 ± 0.28)×10⁹, and (2.03 ± 0.13) × 10⁹ M⁻¹ s⁻¹, and with e⁻_aq were (2.13 ± 0.03)×10¹⁰, (3.35 ± 0.03)×10¹⁰, (3.25 ± 0.05)×10¹⁰, (3.37 ± 0.05)×10¹⁰, and (3.47 ± 0.02) × 10¹⁰ M⁻¹ s⁻¹, respectively. Transient spectra for the intermediates formed by the reaction of OH were also measured over the time period of 1-100 μs to better understand the stability of the radicals and for evaluation of reaction rate constants. Degradation efficiencies for the OH and e⁻_aq reactions with the five ICM were determined using steady-state γ-radiolysis. Collectively, these data will form the basis of kinetic models for application of advanced oxidation/reduction processes for treating water containing these compounds.     

Ozone oxidation for the alleviation of membrane fouling by natural organic matter: A review

Membrane fouling by natural organic matter is one of the main problems that slow down the application of membrane technology in water treatment. O₃ is able to efficiently change the physico-chemical characteristics of natural organic matter in order to reduce membrane fouling. This paper presents the state-of-the-art knowledge of the reaction mechanisms between natural organic matter and molecular O₃ or OH radicals, together with an in-depth discussion of the interactions between natural organic matter and membranes that govern membrane fouling, inclusive the effect of O₃ oxidation on it.     

An investigation of the formation of chlorate and perchlorate during electrolysis using Pt/Ti electrodes: The effects of pH and reactive oxygen species and the results of kinetic studies

The characteristics of chlorate (ClO₃⁻) and perchlorate (ClO₄⁻) formation were studied during the electrolysis of water containing chloride ions (Cl⁻). The experiments were performed using an undivided Pt/Ti plate electrode under different pH conditions (pH 3.6, 5.5, 7.2, 8.0 and 9.0). ClO₃⁻ and ClO₄⁻ were formed during electrolysis in proportion to the Cl⁻ concentration. The generation rates of ClO₃⁻ and ClO₄⁻ under acidic conditions (pH 3.6 and 5.5) were lower than in basic pH conditions (pH 7.2, 8.0 and 9.0). However, the pH of the solution did not influence the conversion of ClO₃⁻ to ClO₄⁻. The effects of intermediately formed oxidants on the production of ClO₃⁻ and ClO₄⁻ were observed using sodium thiosulfate (Na₂S₂O₃) as the active chlorine scavenger and tertiary butyl alcohol (t-BuOH) as the hydroxyl radical (OH) scavenger. The results revealed that electrolysis reactions that involved active chlorine contributed dominantly to ClO₃⁻ production. The direct oxidation reaction rate of Cl⁻ to ClO₃⁻ was 13%. The OH species that were intermediately formed during electrolysis were also found to significantly affect ClO₃⁻ and ClO₄⁻ production. The key formation pathways of ClO₃⁻ and ClO₄⁻ were studied using kinetic model development.