Dimension Reduction Method in Thermodynamics of Multireaction Systems(Ⅰ)Mole Numbers,Thermodynamic Properties and Partial Molar Properties Relations

When species in solution undergo multiple chemical reactions the solution may be treatedas a solution of all species actually present or as a hypothetical solution composed of unreactedindependent species.Based on the fundamental thermodynamic principle the relationships of themole numbers,the molar fractions,the thermodynamic properties and the partial molar propertiesbetween the hypothetical solution of unreacted independent species and the equilibrated solutionof actual species have been established.The hypothetical solution provides a way of reducing thedimensionality of problem and simplifying the analysis.     

Elemental Composition Method in Thermodynamics of Multireaction Systems* (Ⅰ) Molar Number, Thermodynamic Properties and Partial Properties Relations

When species in the solution undergo multiple chemical reactions, the solution may be treated as a solution of all species actually present or as a hypothetical solution composed of elemental species. Based on the fundamental thermodynamic principle, the relationships of mole numbers, molar fractions, thermodynamic properties, partial molar properties, potential and fugacity between the hypothetical solution of elemental species and the equilibrated solution of actual species were derived. The hypothetical elemental solution provides a way of reducing the dimensionality of problem, simplifying the analysis and visualizing the phase behavior.     

Sodium Bisulfite-Induced Changes in the Physicochemical,Surface and Adhesive Properties of Soy β-Conglycinin

The effects of sodium bisulfite on the electrophoresis profile; turbidity; and thermal, surface, and adhesive properties of soy β-conglycinin protein were studied. Sodium bisulfite dissociated high-molecular-weight aggregates in the protein, and the aggregate percentage decreased with increasing sodium bisulfite concentration. Denaturation temperature of sodium-bisulfite-treated β-conglycinin increased as sodium bisulfite increased. However, at high sodium bisulfite concentration (i.e. 36 g/L), denaturation enthalpy decreased significantly. Sodium bisulfite caused changes in the β-conglycinin secondary structure and promoted ionization of lysine residues as indicated by FT-IR results. A sudden drop in turbidity at pH 4.8 was observed at the same salt level. The contact angle of β-conglycinin on cherry wood reached its minimum at 6 g/L sodium bisulfite and 24 g/L on glass. Water resistance of β-conglycinin was improved but not significantly by 6 g/L sodium bisulfite at pH 9.5. An obvious increase in adhesion strength of the protein occurred at 3 and 6 g/L sodium bisulfite at pH 4.8. A high sodium bisulfite concentration at 36 g/L sharply reduced the adhesive performance of β-conglycinin.     

Composites of Poly(Keto-Sulfide)–Epoxy Resin Systems and Their Thermal and Mechanical Properties

A novel matrix resin system, poly(keto-sulfide)–epoxy resin, has been developed. The poly(keto-sulfide)s (PKS), based on various ketones, formaldehyde, and sodium hydrogen sulfide (NaSH), were prepared by the reported process. These (PKS) having terminal thiol (–SH) groups were used for curing commercial epoxy resin (i.e., diglycidyl ether of bisphenol A – DGEBA), to fabricate crosslinked epoxy-poly(keto-sulfide) resin glass fiber-reinforced composites (GRC). Various epoxy/hardener (PKS) mixing ratios were used, and the curing of epoxy-PKS has been monitored using differential scanning calorimetry (DSC) in dynamic mode. Based on DSC parameters the GRC of epoxy-PKS were prepared and characterized by thermal and mechanical methods. The variation in resin/hardener ratio led to variations in thermal and mechanical properties.     

Heat Loss Reduction in Combustion of Cu(Ni)–Al Powder Systems Due to Their Microstructural Transformation

The paper reviews published data on structural–phase changes in Cu–Al and Ni–Al metal powders during in situ combustion. The heatconservation properties of various structures located around reactive cells in the combustion wave zone are revealed. The mechanism providing for nearly adiabatic combustion conditions is discussed and a microstructural model for this mechanism is justified.     

Experimental Study of CMC Evaluation in Single and Mixed Surfactant Systems, Using the UV–Vis Spectroscopic Method

In this study, the critical micellar concentration (CMC) of anionic, cationic and nonionic surfactants was determined using the UV–Vis spectroscopic method. Sodium lauryl sulfate (SDS) as anionic, hexadecyl-trimethyl-ammonium bromide as cationic, tert-octylphenol ethoxylates TOPEON (with N = 9.5, 7.5 and 35) and lauryl alcohol ethoxylate (23EO) as nonionic surfactants have been used. Concentration of surfactants varies both from below and above the CMC value in the pyrene solution. In addition, the amount of the CMC was determined using the values from the data obtained from the graph of absorbance versus concentration of surfactants. A comparative study was conducted between the results of the present study and the literature which shows a good agreement, in particular for TOPEO9.5 and LAEO23. Furthermore, the CMC value of SDS (as an ionic surfactant) in the presence of nonionic surfactants was also examined. The result reveals that with addition of small amount of nonionic surfactant to the anionic SDS surfactant, a decline in the CMC value of the anionic–nonionic system relative to the CMC of pure anionic surfactant was observed. In addition and for the first time, the effect of UV irradiation on the size of the micelle formations was studied. It was found that UV irradiation causes the formation of smaller micelles which is of prime concern in membrane technology.     

Structure, Properties and Behavior of Kyanite： Use in Refractory Monolithics

1 Introduction Kyanite is an important naturally occurring in-dustrial mineral and is used in the manufacture of avariety of industrial ceramic products; notable exam-ples include refractories and porcelains. It is a high-pressure polymorph of the aluminosilicates of the ne-sosilicate group, which includes kyanite, sillimanite,and andalusite. These three aluminous or alumina-rich minerals are chemically identical with the compo-sition, Al_2SiO_5, but have different crystal structuresand physical properties. It is, however, their alumina     

Cast (Self-Flow) Ceramic Castables. 4. Spreadability of Molding Systems and Some Properties of Mullite – Silicon Carbide Ceramic Castables

The rheological properties of molding systems are shown to depend on the spreadability of the mixture under the action of its own mass; some of the factors influencing the self-flow are determined, namely, the moisture content, the content of the filler, and the temperature of the mixture. The described self-flow castables based on a mullite HCBS and a SiC filler have a porosity of 18% after drying and 16 – 16.5% after heat treatment. Their ultimate bending strength is 45 MPa and the ultimate compressive strength is 110 MPa, which is higher than those of the known refractories of similar compositions. The temperature of 4% deformation of mullite – silicon carbide refractory heat treated at 1350°C and having C _Vf = 0.4 is 1710 – 1720°C, which is 70 – 80°C higher than that of a similar material molded by pressing and heat treated at 1500°C.     

Synthesis of Multiwalled Carbon Nanotubes–Poly(Methacrylic Acid) Nanohybrid Systems: Characterization,Thermal Properties,and In Vitro Release Studies of Naproxen as a Model Drug

Nanohybrid systems based on carbon nanotubes and pH-sensitive poly(methacrylic acid) were prepared through attaching polymer chains onto carbon nanotubes. First, polymerizable groups were attached onto carbon nanotube walls, then the polymerizable groups were copolymerized with different ratios of methacrylic acid. Obtained systems were studied and characterized through Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. A model drug (naproxen) was entrapped into the prepared materials and in vitro release studies were performed in pH 1 (simulated gastric fluids) and pH 7.4 (simulated intestinal fluids). It was noticed that release in simulated intestinal fluids was faster than simulated gastric fluids, therefore the prepared nanohybrid systems can be considered as appropriate carriers for colon-specific drug delivery.     

The separation and recovery of copper(Ⅱ), nickel(Ⅱ), cobalt(Ⅱ), zinc(Ⅱ),and cadmium(Ⅱ) in a sulfate-based solution using a mixture of Versatic 10 acid and Mextral 984H

We studied the separation and recovery of copper(Ⅱ), nickel(Ⅱ), cobalt(Ⅱ), zinc(Ⅱ), and cadmium(Ⅱ) from magnesium and calcium, using synergistic solvent extraction(SSX) in a typical hydrometallurgical waste solution. A mixture of Versatic 10 acid and Mextral 984 H, diluted with Mextral DT100, was used to obtain fundamental data on p H and distribution isotherms, as well as the kinetics of extraction and stripping. We also investigated the main effects and interactions of common solvent extraction factors: the extraction p H at equilibrium, the temperature, and the extractant concentration. The synergistic effect for extracting metals was confirmed. The results showed that the addition of Mextral 984 H enhanced the separation factors of copper, nickel, cobalt,zinc, and cadmium over magnesium and calcium. Compared with Versatic 10 acid alone, for a mixture of0.5 mol·L~(-1) Versatic 10 acid/0.5 mol·L~(-1)Mextral 984 H, Δp H50 values of copper, nickel, cobalt, zinc, and cadmium were found to be N 2.0, 3.30, 2.85, 0.95, and 1.32 p H units, respectively. The Δp H_(50)(Zn–Mg)and Δp H_(50)(Zn–Ca)values were 3.27 and 2.25, respectively, indicating easy separation and recovery of copper, nickel, zinc, cobalt,and cadmium. The extraction and stripping of copper, cobalt, zinc, and cadmium were fast, with 90% of the metal transferred in 2 min. We next studied whether the metals could be stripped from the extracted liquid selectively in sequence, by using sulfuric acid at different concentrations. The influence of the molecular structure of the oxime and carboxylic acid components upon the synergistic effects was identified by numerical analysis.Excellent separation of copper, nickel, cobalt, and zinc over magnesium and calcium was achieved with this synergistic solvent extraction system.     

Acquisition of Water Solubility Diagrams in Ternary Systems (AOT/Organic Solvent/Alcohol) and Extraction of α-Lactalbumin Using Reverse Micellar Systems

In this study water solubility curves were constructed and calorimetric measurements obtained for reverse micellar systems consisting of an alcohol (isopropanol or butanol), surfactant (AOT) and organic solvent (isooctane or hexane). Also evaluated were the effects of alcohol and solvent type and surfactant concentration on the extraction of the α-lactalbumin (α–la). From the obtained solubility diagrams for ternary systems, it was concluded that isooctane presented the highest water solubility capacity in the center of the micelle systems with hexane, since isooctane has greater molecular volume and greater effect of the surfactant aggregation number. With respect to the alcohols, it was observed that isopropanol and butanol act in the system as a co-surfactant, since they prefer to adsorb at the water/solvent interface. It was also verified that butanol improved water solubility inside the reverse micellar due to its contribution to increase the critical packing parameter. The amount of α-la extracted increased proportionally with the AOT concentration for systems with isooctane and hexane. However, for systems with the latter solvent, the concentration of extracted protein first increases and then decreases. The extraction power of reverse micellar systems with isooctane was influenced by the type of alcohol with butanol showing better results. For systems containing hexane there was no effect of the alcohol added to the system on extraction power of α-lactalbumin.     

Properties of Colloidal Silica‐Fixed and Propionylated Wood Composite (II): Flame Resistance and Other Properties of the Composites

Abstract

The flame resistance, color change, strength, and decay resistance of colloidal silica‐fixed (CSW), propionylated only, and propionylated dual‐treated wood (CSPW) composites were evaluated. The oxygen indexes of the CSPW composites were similar to the CSW composites but much higher than those of untreated woods and the propionylated woods. The oxygen indexes increased with an increase in the weight percent gain of the colloidal silica (WPG_csi) in the composites, showing an effective reduction in the flammability by the fixation of colloidal silica. The CSPW composites showed little or no difference in the modulus of elasticity and modulus of rupture compared with the untreated woods, indicating little or no significant reduction in strength properties of the wood specimens. The color difference of the wood specimens before and after treatment changed slightly. Minimal weight losses of the CSPW composites occurred upon fungal attack by T. versicolor and F. palustris, showing good decay resistance by propionylation of the composites.     

Preparation of dendritic bismuth film electrodes and their application for detection of trace Pb(Ⅱ)and Cd(Ⅱ)

In this paper,dendritic Bi film electrodes with porous structure had successfully been prepared on glassy carbon electrode using a constant current electrolysis method based on hydrogen bubble dynamic templates.The electrode prepared using a large applied current density showed an increased internal electroactive area and a significantly improved electrochemical performance.The analytical utility of the prepared dendritic Bi film electrodes for the determination of Pb(Ⅱ)and Cd(Ⅱ)in the range of 5–50 μg·L~(-1)were presented in combination with square wave stripping voltammetry in model solution.Compared with non-porous Bi film electrode,the dendritic Bi film electrode exhibited higher sensitivity and lower detection limit.The prepared Bi film electrode with dendritic structure was also successfully applied to real water sample analysis.     

Influence of Residual Water in a Glass on Its Rheological and Relaxation Properties (by the Example of a 5Na2O · 95B2O3Glass)

Glasses of the 5Na₂O · 95B₂O₃(mol %) composition synthesized at a temperature of 1100°C for 180 and 20 min are studied. The temperature dependences of the viscosity and the thermal expansion of glasses are obtained. The thermal expansion coefficients and glass transition temperatures of the studied glasses are determined, and the parameters of structural relaxation (the constant characterizing the width of the spectrum of relaxation times, the relaxation modulus equal to the ratio of the viscosity to the relaxation time, and the relaxation time at zero reciprocal temperature) are calculated from the dilatometric curves measured at temperatures close to the glass transition range. The water content in the studied glasses is estimated by comparing the obtained dependence of the viscosity on the water content with the data available in the literature for glasses of a similar composition. The assumption is made that the structural relaxation time in sodium borate glass decreases with an increase in the water content.     

Synthesis of Pre‐Organized Bisdiglycolamides (BisDGA) and Study of their Extraction Properties for Actinides(III) and Lanthanides(III)

Bisdiglycolamides 1–9 were synthesized and studied as extracting agents for An(III) and Ln(III) from nitric acid solutions. Compounds 1d‐3 with rigid spacers as m‐xylylene and 6b‐9 with more flexible alkyl chain linkers, show higher selectivity for Eu(III) extraction over Am(III) than diglycolamides (TBDGA, DMDODGA, TODGA) in (50:50)_%Vol HPT/1‐octanol mixture. Am(III) and Eu(III) extraction kinetics are very fast and back‐extraction with more than 99% efficiency of both cations is possible after four times of contact of the loaded solvent with fresh 0.01 mol/L nitric acid solutions.     

Investigation of Spectroscopic Properties and Spin-Orbit Splitting in the X(2)Π and A(2)Π Electronic States of the SO(+) Cation

The potential energy curves (PECs) of the X(2)Π and A(2)Π electronic states of the SO(+) ion are calculated using the complete active space self-consistent field method, which is followed by the internally contracted multireference configuration interaction (MRCI) approach for internuclear separations from 0.08 to 1.06 nm. The spin-orbit coupling effect on the spectroscopic parameters is included using the Breit-Pauli operator. To improve the quality of PECs and spin-orbit coupling constant (A(0)), core-valence correlation and scalar relativistic corrections are included. To obtain more reliable results, the PECs obtained by the MRCI calculations are corrected for size-extensivity errors by means of the Davidson modification (MRCI+Q). At the MRCI+Q/aug-cc-pV5Z+CV+DK level, the A(0) values of the SO(+)(X(2)Π(1/2, 3/2)) and SO(+)(A(2)Π(1/2, 3/2)) are 362.13 and 58.16 cm(-1) when the aug-cc-pCVTZ basis set is used to calculate the spin-orbit coupling splitting, and the A(0) of the SO(+)(X(2)Π(1/2, 3/2)) and SO(+)(A(2)Π(1/2, 3/2)) are 344.36 and 52.90 cm(-1) when the aug-cc-pVTZ basis set is used to calculate the spin-orbit coupling splitting. The conclusion is drawn that the core-valence correlations correction makes the A(0) slightly larger. The spectroscopic results are obtained and compared with those reported in the literature. Excellent agreement exists between the present results and the measurements. The vibrational manifolds are calculated, and those of the first 30 vibrational states are reported for the J = 0 case. Comparison with the measurements shows that the present vibrational manifolds are both reliable and accurate.     

Process Optimization,Physical Properties,and Environmental Stability of an α-Tocopherol Nanocapsule Preparation Using Complex Coacervation Method and Full Factorial Design

α-Tocopherol (α-Toc) has valuable biological activity, but its activity is limited when exposed to environmental factors. Nanocapsules can be used to overcome this problem. Using nanocapsules in the range of 100–200 nm is more beneficial. A 2⁴ full factorial design was carried out to optimize the size of nanocapsules using the complex coacervation method. The four factors were the amount of the wall material, the ratio of core material to wall material, the pH of the solution, and the speed of the homogenizer. The smallest nanocapsules (176 nm) were obtained at a wall content (gelatine and pectin) of 0.8 mg, a percentage of core material (α-Toc) to wall material of 20%, a pH = 4.5, and a homogenizer speed of 12,000 rpm. The encapsulation efficiency was 90.6 ± 1.1%, and the encapsulation yield was 83.4 ± 1.6%. Assessment of the stability of α-Toc after 1 month showed that encapsulation could improve its stability in the presence of three influential factors: humidity, light, and temperature.     

Synthesis,adsorption and selectivity of inverse emulsion Cd(Ⅱ) imprinted polymers

Inverse emulsion polymerization was employed to synthesize inverse emulsion Cd(II) imprinted polymers(IEII P). The morphology and functional groups of IEIIP were characterized by SEM,FTIR and TG. Static adsorption experiments and competitive adsorption test were used to evaluate the adsorption ability of IEIIP. The adsorption capacity of polymers could reach 86.7 mg·g~(-1) under the optimal adsorption conditions. The pseudo second order kinetic model and Langmuir isotherm model could be used to analyze the experimental data well. The adsorption process of IEIIP was chemical adsorption process and monomolecular type. Thermodynamic parameters showed that the adsorption process was endothermic and could occur spontaneously. The selectivity coefficients k of Cd~(2+)/Pb~(2+), Cd~(2+)/Zn~(2+) and Cd~(2+)/Cu~(2+) were 2.4998, 1.2437 and 4.6882, respectively. The proposed method provides a new thought for removing Cd(II) in water samples.