Immunosensor for detection of Yersinia enterocolitica based on imaging ellipsometry

An immunosensor for the detection of pathogens was developed using imaging ellipsometry (IE) as a detection method. Yersinia enterocolitica was selected as the target pathogen in this study. A gold surface deposited with a self-assembled layer of 11-mercaptoundecanoic acid (11-MUA) was used as a substrate. For the fabrication of the immunosensor, protein G spots were made on the substrate using an inkjet-type microarrayer, and monoclonal antibody (Mab) was adsorbed onto the protein G spots. Deposition of each layer onto the substrate was confirmed by the measurement of surface plasmon resonance. The ellipsometric image of the protein G spot and the Mab-adsorbed protein G spot were acquired using an off-null ellipsometry type of imaging ellipsometry system. By measuring the ellipsometric angles of the protein layers, the surface concentration of each protein layer was calculated. The change in the mean optical intensity of the protein spot to the various concentrations of Y.enterocolitica was estimated. The immunosensor using imaging ellipsometry could successfully detect Y. enterocolitica in concentrations varying from 10(3) to 10(7) cfu/mL. The proposed immunosensor system has the advantage of allowing label-free detection, high sensitivity, and operational simplicity.     

TiO2 nanowire bundle microelectrode based impedance immunosensor for rapid and sensitive detection of Listeria monocytogenes

A novel TiO 2 nanowire bundle microelectrode based immunosensor was demonstrated as a more sensitive, specific, and rapid technology for detection of Listeria monocytogenes. TiO 2 nanowire bundle was prepared through a hydrothermal reaction of alkali with TiO 2 powder and connected to gold microelectrodes with mask welding. Monoclonal antibodies were immobilized on the surface of a TiO 2 nanowire bundle to specifically capture L. monocytogenes. Impedance change caused by the nanowire-antibody-bacteria complex was measured and correlated to bacterial number. This nanowire bundle based immunosensor could detect as low as 10 (2) cfu/ml of L. monocytogenes in 1 h without significant interference from other foodborne pathogens.     

Immunosensor based on the ZnO nanorod networks for the detection of H1N1 swine influenza virus

This paper presents an immunosensor fabricated on patterned zinc oxide nanorod networks (ZNNs) for detecting the H1N1 swine influenza virus (H1N1 SIV). Nanostructured ZnO with a high isoelectric point (IEP, approximately 9.5) possesses good absorbability for proteins with low IEPs. Hydrothermally grown ZNNs were fabricated on a patterned Au electrode (0.02 cm2) through a lift-off process. To detect the H1N1 SIV, the sandwich enzyme-linked immunosorbent assay (ELISA) method was employed in the immunosensor. The immunosensor was evaluated in an acetate buffer solution containing 3,3',5,5'-tetramethylbenzidine (TMB) via cyclic voltammetry at various H1N1 SIV concentrations (1 pg/mL-5 ng/mL). The measurement results of the fabricated immunosensor showed that the reduction currents of TMB at 0.25 V logarithmically increased from 259.37 to 577.98 nA as the H1N1 SIV concentration changed from 1 pg/mL to 5 ng/mL. An H1N1 SIV immunosensor, based on the patterned ZNNs, was successfully realized for detecting 1 pg/mL-5 ng/mL H1N1 SIV concentrations, with a detection limit of 1 pg/mL for H1N1 SIV.     

Positive potential operation of a cathodic electrogenerated chemiluminescence immunosensor based on luminol and graphene for cancer biomarker detection

In this work, we report a cathodic electrogenerated chemiluminescence (ECL) of luminol at a positive potential (ca. 0.05 V vs Ag/AgCl) with a strong light emission on the graphene-modified glass carbon electrode. The resulted graphene-modified electrode offers an excellent platform for high-performance biosensing applications. On the basis of the cathodic ECL signal of luminol on the graphene-modified electrode, an ECL sandwich immunosensor for sensitive detection of cancer biomarkers at low potential was developed with a multiple signal amplification strategy from functionalized graphene and gold nanorods multilabeled with glucose oxidase (GOx) and secondary antibody (Ab(2)). The functionalized graphene improved the electron transfer on the electrode interface and was employed to attach the primary antibody (Ab(1)) due to it large surface area. The gold nanorods were not only used as carriers of secondary antibody (Ab(2)) and GOx but also catalyzed the ECL reaction of luminol, which further amplified the ECL signal of luminol in the presence of glucose and oxygen. The as-proposed low-potential ECL immunosensor exhibited high sensitivity and specificity on the detection of prostate protein antigen (PSA), a biomarker of prostate cancer that was used as a model. A linear relationship between ECL signals and the concentrations of PSA was obtained in the range from 10 pg mL(-1) to 8 ng mL(-1). The detection limit of PSA was 8 pg mL(-1) (signal-to-noise ratio of 3). Moreover, the as-proposed low-potential ECL immunosensor exhibited excellent stability and reproducibility. The graphene-based ECL immunosensor accurately detected PSA concentration in 10 human serum samples from patients demonstrated by excellent correlations with standard chemiluminescence immunoassay. The results suggest that the as-proposed graphene ECL immunosensor will be promising in the point-of-care diagnostics application of clinical screening of cancer biomarkers.     

Self-assembled layer of thiolated protein G as an immunosensor scaffold

In this study, our goal was to produce a self-assembled layer on a gold electrode that would enable the capture of antibodies orientated for maximum binding to their specific antigen in an immunosensor. To achieve this, the amine groups from lysine residues in protein G were initially converted to thiol groups with 2-iminothiolane. The high affinity of thiols for a gold surface facilitates the direct formation of a self-assembled protein G layer. Following this, the coated gold electrode was exposed to a solution of capture antibody (mAb1) so that these antibodies could attach to the protein G layer through their nonantigenic regions, leaving antigen binding sites available with minimal steric hindrance for binding of target analyte. A comparative study between this method and the more conventional strategy of covalently attaching a layer of nonthiolated protein G on an alkanethiol self-assembled monolayer-coated gold electrode has been performed. Based on a reduced preparation time, and an enhanced capacity for immobilized capture antibody to bind its target analyte due to a more favorable orientation, the layer of thiolated protein G was found to be a more suitable backbone for an electrochemical immunosensor.     

Electrochemical detection of prostate-specific antigen based on gold colloids/alumina derived sol-gel film

An electrochemical immunosensor for total prostate-specific antigen (PSA) was fabricated based on anti-PSA antibody-functionalized gold colloids/alumina sol-gel film. The presence of colloidal gold provides a good microenvironment for the immobilization of biomolecules. The fabrication process of the immunosensor was characterized by cyclic voltammetry. A direct electrochemical immunoassay format was employed to detect PSA on the basis of the potential change before and after the antigen-antibody interaction. Under optimal conditions, the potential change was proportional to PSA concentration ranging from 4.0 to 13 ng mL^− 1 with a detection limit of 3.4 ng mL^− 1. In addition, the performance and factors influencing the performance of the immunosensor were investigated and optimized.     

A localized surface plasmon resonance based immunosensor for the detection of casein in milk

In this research, a localized surface plasmon resonance (LSPR) immunosensor based on gold-capped nanoparticle substrate for detecting casein, one of the most potent allergens in milk, was developed. The fabrication of the gold-capped nanoparticle substrate involved a surface-modified silica nanoparticle layer (core) on the slide glass substrate between bottom and top gold layers (shell). The absorbance peak of the gold-capped nanoparticle substrate was observed at ～520 nm. In addition, the atomic force microscopy (AFM) images demonstrated that the nanoparticles formed a monolayer on the slide glass. After immobilizing anti-casein antibody on the surface, our device, casein immunosensor, could be applied easily for the detection of casein in the raw milk sample without a difficult pretreatment. Under the optimum conditions, the detection limit of the casein immunosensor was determined as 10 ng/mL. Our device brings several advantages to the existing LSPR-based biosensors with its easy fabrication, simple handling, low-cost, and high sensitivity.     

A localized surface plasmon resonance based immunosensor for the detection of casein in milk

In this research, a localized surface plasmon resonance (LSPR) immunosensor based on gold-capped nanoparticle substrate for detecting casein, one of the most potent allergens in milk, was developed. The fabrication of the gold-capped nanoparticle substrate involved a surface-modified silica nanoparticle layer (core) on the slide glass substrate between bottom and top gold layers (shell). The absorbance peak of the gold-capped nanoparticle substrate was observed at ∼520 nm. In addition, the atomic force microscopy (AFM) images demonstrated that the nanoparticles formed a monolayer on the slide glass. After immobilizing anti-casein antibody on the surface, our device, casein immunosensor, could be applied easily for the detection of casein in the raw milk sample without a difficult pretreatment. Under the optimum conditions, the detection limit of the casein immunosensor was determined as 10 ng/mL. Our device brings several advantages to the existing LSPR-based biosensors with its easy fabrication, simple handling, low-cost, and high sensitivity.     

Electrochemical impedance immunosensor for the detection of cardiac biomarker Myogobin (Mb) in aqueous solution

A label-free, electrochemical impedance immunosensor based on surface modified thin flat gold wire electrode is reported for the quantitative detection of cardiac biomarker Myoglobin in aqueous solution. The protein antibody, ab-Mb, was covalently immobilized through a self assembled monolayer of 11-mercaptoundecanoic acid (MUA) and 3-mercapto propionic acid (MPA) via carbodiimide coupling reaction using N-(3-dimethylaminopropyl)-N′-ethyl carbodiimide hydrochloride (EDC) and N-Hydroxy Succinamide (NHS). The immunosensor (ab-Mb/MUA-MPA/Au) was characterized by electrochemical techniques. The electrochemical performance of the immunosensor was studied by electrochemical impedance spectroscopy. The immunosensor showed an increased electrontransfer resistance on coupling with biomarker protein antigen, ag-Mb, in the presence of a redox probe [Fe (CN)₆]^3−/4−. The modified Au electrode immunosensor exhibits an electrochemical impedance response to antigen, ag-Mb concentrations in a linear range from 10 ng to 650 ng mL⁻¹ with a lowest detection limit of 5.2 ng mL⁻¹.     

Triple signal amplification of graphene film, polybead carried gold nanoparticles as tracing tag and silver deposition for ultrasensitive electrochemical immunosensing

A triple signal amplification strategy was designed for ultrasensitive immunosensing of cancer biomarker. This strategy was achieved using graphene to modify immunosensor surface for accelerating electron transfer, poly(styrene-co-acrylic acid) microbead (PSA) carried gold nanoparticles (AuNPs) as tracing tag to label signal antibody (Ab(2)) and AuNPs induced silver deposition for anodic stripping analysis. The immunosensor was constructed by covalently immobilizing capture antibody on chitosan/electrochemically reduced graphene oxide film modified glass carbon electrode. The in situ synthesis of AuNPs led to the loading of numerous AuNPs on PSA surface and convenient labeling of the tag to Ab(2). With a sandwich-type immunoreaction, the AuNPs/PSA labeled Ab(2) was captured on the surface of an immunosensor to further induce a silver deposition process. The electrochemical stripping signal of the deposited silver nanoparticles in KCl was used to monitor the immunoreaction. The triple signal amplification greatly enhanced the sensitivity for biomarker detection. The proposed method could detect carcinoembryonic antigen with a linear range of 0.5 pg mL(-1) to 0.5 ng mL(-1) and a detection limit down to 0.12 pg mL(-1). The immunosensor exhibited good stability and acceptable reproducibility and accuracy, indicating potential applications in clinical diagnostics.     

Simultaneous determination of pesticides using a four-band disposable optical capillary immunosensor

The development of a four-band capillary optical immunosensor for the simultaneous determination of mesotrione, hexaconazole, paraquat, and diquat is described. Four distinct bands (each corresponding to a different analyte) are created in the internal walls of a plastic capillary by immobilizing protein conjugates of the analytes. To perform the assay, the capillary is filled with a mixture of anti-analyte-specific antibodies together with a standard or sample containing the analyte(s). After a short incubation, a mixture of the appropriate second antibodies labeled with fluorescein is introduced into the capillary. To measure the fluorescence intensity bound onto each band, the capillary was scanned, perpendicularly to its axis, by a laser light beam. Part of the emitted photons were trapped into the capillary walls and waveguided to a photomultiplier placed at the one end of the capillary. The analytical characteristics of the assays of mesotrione, paraquat, diquat, and hexaconazole were as follows: detection limits of 0.04, 0.06, 0.09, and 0.10 ng/mL, respectively; dynamic ranges up to 9, 6, 12, and 15 ng/ mL, respectively, intra- and interassay CVs less than 10%. The analytical characteristics of the assays were comparable with those of the corresponding single-analyte fluoroimmunoassays performed in microtitration wells, proving the ability of the proposed immunosensor for reliable multianalyte determinations. Moreover, the combination of low-cost disposable plastic capillary tubes with the low consumption of reagents, the short assay time, and the multianalyte feature of the proposed immunosensor indicates its potential for environmental analysis.     

Ultrasensitive immunoassay of protein biomarker based on electrochemiluminescent quenching of quantum dots by hemin bio-bar-coded nanoparticle tags

A hemin bio-bar-coded nanoparticle probe labeled antibody was designed by the assembly of antibody and alkylthiol-capped bar-code G-quadruplex DNA on gold nanoparticles and the interaction of hemin with the DNA to form a G-quadruplex/hemin bio-bar-code. An ultrasensitive immunoassay method was developed by combining the labeled antibody with an electrochemiluminescent (ECL) immunosensor for protein. The ECL immunosensor was constructed by a layer-by-layer modification of carbon nanotubes, CdS quantum dots (QDs), and capture antibody on a glassy carbon electrode. In air-saturated pH 8.0 PBS the immunosensor showed a carbon-nanotube-enhanced cathodic ECL emission of QDs. Upon the formation of immunocomplex, the ECL intensity decreased owing to the consumption of ECL coreactant in bio-bar-code electrocatalyzed reduction of dissolved oxygen. Using α-fetoprotein as model analyte, the quenched ECL could be used for immunoassay with a linear range of 0.01 pg mL(-1) to 1 ng mL(-1) and a detection limit of 1.0 fg mL(-1). The wide detection range and high sensitivity resulted from the enhanced ECL emission and highly efficient catalysis of the bio-bar-code. The immunosensor exhibited good stability and acceptable fabrication reproducibility and accuracy, showing great promise for clinical application.     

A novel piezoelectric quartz micro-array immunosensor for detection of immunoglobulinE

A novel multi-channel 2 x 5 model of piezoelectric (PZ) micro-array immunosensor has been developed for quantitative detection of human immunoglobulinE (IgE) in serum. Every crystal unit of the fabricated piezoelectric IgE micro-array immunosensor can oscillate without interfering each other. A multi-channel 2 x 5 model micro-array immunosensor as compared with the traditional one-channel immunosensor can provide eight times higher detection speeds for IgE assay. The anti-IgE antibody is deposited on the gold electrode's surface of 10 MHz AT-cut quartz crystals by SPA (staphylococcal protein A), and serves as an antibody recognizing layer. The highly ordered antibody monolayers ensure well-controlled surface structure and offer many advantages to the performance of the sensor. The uniform amount of antibody monolayer coated by the SPA is good, and non-specific reaction caused by other immunoglobulin in sample is found. The fabricated PZ immunosensor can be used for human IgE determination in the range of 5-300 IU/ml with high precision (CV is 4%). 50 human serum samples were detected by the micro-array immunosensor, and the results agreed well with those given by the commercially ELISA test kits. The correlation coefficient is 0.94 between ELISA and PZ immunosensor. After regeneration with NaOH the coated immunosensor can be reused 6 times without appreciable loss of activity.     

Compact Integrated Optical Immunosensor using Replicated Chirped Grating Coupler Sensor Chips

A novel compact multichannel integrated optical sensor module isdescribed. Its performance is demonstrated by measurement of the mass adsorption of an analyte molecule to the transducer surface by refractometry in an immunosensor experiment. The signal transduction is achieved by means of chirped grating couplers, which allow simple yet highly functional sensor modules to be built. The experiments were performed with high-sensitivity replicated polycarbonate TiO(2) waveguide sensor chips for detecting the binding of rabbit immunoglobulin to immobilized protein A. Aresolution of ?3 pg/mm(2) surface mass coverage was obtained in a dual-channel module with size 10 cm x 10 cm x10 cm.     

Versatile immunosensor using CdTe quantum dots as electrochemical and fluorescent labels

A versatile immunosensor using CdTe quantum dots as electrochemical and fluorescent labels has been developed for sensitive protein detection. This sandwich-type sensor is fabricated on an indium tin oxide chip covered with a well-ordered gold nanoparticle monolayer. Gel imaging systems were successfully introduced to develop a novel high-efficient optical immunoassay, which could perform simultaneous detection for the samples with a series of different concentrations of a target analyte. The linear range of this assay was between 0.1 and 500 ng/mL, and the assay sensitivity could be further increased to 0.005 ng/mL with the linear range from 0.005 to 100 ng/mL by stripping voltammetric analysis. The immunosensor showed good precision, high sensitivity, acceptable stability, and reproducibility and could be used for the detection of real sample with consistent results in comparison with those obtained by the ELISA method.     

Chemiluminescence imaging immunoassay of multiple tumor markers for cancer screening

A sensitive chemiluminescence (CL) imaging immunoassay method for detection of multiple tumor markers with high throughput, easy operation, and low cost was developed. The immunosensor array was prepared by covalently immobilizing capture antibodies on corresponding sensing sites on a silanized disposable glass chip. Gold nanoparticle-based bioconjugates with a high molar ratio of horseradish peroxidase (HRP) to detection antibodies were used for signal amplification. Under a sandwich immunoassay, the CL signals triggered by HRP captured on each sensing cell were collected by a charge-coupled device for simultaneous measurement of biomarkers and combination diagnosis of certain tumors. As a proof of concept, the immunosensor array was applied to detect α-fetoprotein, carcinoma antigen 125, carbohydrate antigen 153, and carcinoembryonic antigen and to screen patients with liver, breast, or ovarian cancers. This method showed wide linear ranges over 5 orders of magnitude and much lower detection limits than previously reported multiplexed immunoassays. The high throughput and acceptable stability, reproducibility, and accuracy showed good applicability of the proposed multiplex CL imaging immunoassay in clinical diagnosis.     

Electric field-driven strategy for multiplexed detection of protein biomarkers using a disposable reagentless electrochemical immunosensor array

A fast, simple, sensitive, and low-cost method for electrochemical multianalyte immunoassay was developed by combining newly designed electric field-driven incubation with a screen-printed reagentless immunosensor array. The disposable array was prepared by immobilizing respectively horseradish peroxidase (HRP)-labeled antibodies modified gold nanoparticles in biopolymer/sol-gel modified electrodes to obtain direct electrochemical responses of HRP. Upon the formation of immunocomplexes, the responses decreased due to increasing spatial blocking and impedance. At a driving potential of 0.5 V, the incubation process could be accomplished within 2 min. Under optimal conditions, this method could simultaneously detect carbohydrate antigens 153, 125, and 199 and carcinoembryonic antigens ranging from 0.084 to 16, 0.11 to 13, and 0.16 to 15 U mL(-1) and 0.16 to 9.2 ng mL(-1) with a detection time of less than 5 min, and the detection limits corresponding to the signals of 3SD were 0.06, 0.03, and 0.10 U mL(-1) and 0.04 ng mL(-1), respectively. The disposable immunosensor array and simple detection system for fast measurement of panels of tumor markers show significant clinical value for application in cancer screening and provide great potential for convenient point-of-care testing and commercial application.     

Electrochemiluminescence immunosensor based on CdSe nanocomposites

A novel strategy for the enhancement of electrochemiluminescence (ECL) was developed by combining CdSe nanocrystals (NCs), carbon nanotube-chitosan (CNT-CHIT), and 3-aminopropyl-triethoxysilane (APS). A label-free ECL immunosensor for the sensitive detection of human IgG (HIgG) was fabricated. The colloidal solution containing CdSe NCs/CNT-CHIT composite was first covered on the Au electrode surface to form a robust film, which showed high ECL intensity and good biocompatibility. After APS as a cross-linker was covalently conjugated to the CdSe NCs/CNT-CHIT film, the ECL intensity was greatly enhanced. And, an intensity about 20-fold higher than that of the CdSe NCs/CNT-CHIT film was observed. After antibody was bound to the functionalized film via glutaric dialdehyde (GLD), the modified electrode could be used as an ECL immunosensor for the detection of HIgG. The specific immunoreaction between HIgG and antibody resulted in the decrease in ECL intensity. The ECL intensity decreased linearly with HIgG concentration in the range of 0.02-200 ng mL(-1), and the detection limit was 0.001 ng mL(-1). The immunosensor has the advantages of high sensitivity, speed, specificity, and stability and could become a promising technique for protein detection.     

Efficient Microfluidic Screening Method Using a Fluorescent Immunosensor for Recombinant Protein Secretions

Microbial secretory protein expression is widely used for biopharmaceutical protein production. However, establishing genetically modified industrial strains that secrete large amounts of a protein of interest is time-consuming. In this study, a simple and versatile high-throughput screening method for protein-secreting bacterial strains is developed. Different genotype variants induced by mutagens are encapsulated in microemulsions and cultured to secrete proteins inside the emulsions. The secreted protein of interest is detected as a fluorescence signal by the fluorescent immunosensor quenchbody (Q-body), and a cell sorter is used to select emulsions containing improved protein-secreting strains based on the fluorescence intensity. The concept of the screening method is demonstrated by culturing Corynebacterium glutamicum in emulsions and detecting the secreted proteins. Finally, productive strains of fibroblast growth factor 9 (FGF9) are screened, and the FGF9 secretion increased threefold compared to that of parent strain. This screening method can be applied to a wide range of proteins by fusing a small detection tag. This is a highly simple process that requires only the addition of a Q-body to the medium and does not require the addition of any substrates or chemical treatments. Furthermore, this method shortens the development period of industrial strains for biopharmaceutical protein production.     

快速检测糖化血红蛋白的免疫微传感器

研制基于标准CM05工艺和微加工技术的微型糠化血红蛋白免疫传感器,可用于血液中糖化血红蛋白浓度与血红蛋白浓度的快速检测．该微传感器包括含有信号读出电路的传感集成芯片和一次性测试试条,实现了对4—24μg/mL糖化血红蛋白和60～180μg/mL血红蛋白的检测,响应时间小于3min,试剂用量10μL,具有简便、快速、试剂用量少等优点．