共查询到19条相似文献,搜索用时 312 毫秒
1.
目前,适用于汽车电子零部件产品的电磁兼容标准种类繁多,本文将从国际标准、地区法规及指令、国家标准选取与电磁兼容相关内容,以方便业界研究与应用。一、国际标准1.CISPR 25 ed 3.0(2008-03)——用于保护车载接收机的无线电骚扰特性的限值和测量方法。该标准由CISPR/D技术委员会发布,对汽车电子零部件的辐射骚扰和传导骚扰的参考限值要求、测量方法和技术指标要求进行了论述。2.ISO 11452道路车辆——窄带辐射电磁能量产生的电骚扰——零部件试验方法。 相似文献
2.
在制定技术标准过程中,在使用一些要求明晰规则的同时,还需要使用逻辑推理得到的"隐含规则".本文对隐含规则进行了分析,分别以电磁兼容检测标准和安全性能检测标准为例,对涉及的一些典型的隐含规则,进行了分析和讨论.把隐含规则应用于冰箱及冷冻柜进行谐波电流测试的试验配置条件,以及无线输电多功能产品谐波检测配置条件的修订工作,验证了本文结论的有效性. 相似文献
3.
4.
一、基本原理在电磁兼容试验中有两种类型的网络 ,即人工电源网络和耦合去耦网络。人工电源网络 ,又称线路阻抗稳定网络 ,能在射频范围内 ,在受试设备端子与参考地之间 ,或端子之间提供一稳定阻抗。同时将来自电源的无用信号与测量电路隔离开来 ,而仅将受试设备的干扰电压耦合到测量接收机输入端。耦合去耦网络是由各种电感组成 ,以便在测量频段内产生高阻抗隔离。使用HP阻抗分析仪 ,可以对人工电源网络和耦合去耦网络进行阻抗测试。测试原理图见图 1:图 1 阻抗测试原理图下面主要介绍一下CDN耦合去耦网络的阻抗测试 :如图 1所示 ,阻… 相似文献
5.
汽车电磁兼容(EMC)领域的检测标准纷繁复杂,既有国际的通用标准,如CISPR、ISO等;也有欧洲汽车的指令;还有美国汽车工程学会(SAE)的标准.其中,主要测试汽车整车的电磁干扰和抗干扰测试两个方面. 相似文献
6.
根据电磁兼容检测标准中对待测物使用工况的要求,介绍了两种配合现有电磁兼容测量系统的辅助装置:低噪声工况信息记录仪和电磁兼容综合电参量测试仪。详细介绍了工况监测与控制仪器的设计原理,设计成功的该仪器引入极低的背景骚扰电平,完全满足相关测试标准对测试环境和测试系统配置的要求。对工况监测与控制装置在电磁兼容测试中的应用进行了详细分析,表明该装置可以应用在传导骚扰、骚扰功率和谐波电流发射测试。 相似文献
7.
8.
《世界标准信息》2000,(12):46-48
CISPR A CISPR 16-3-2000 无线电干扰和抗干扰性测量设备和方法规范第3部分:CISPR报告和建议 CISPR F CISPR 14-1-2000 电磁兼容性家用和类似用途电热器具和电动工具要求第1部分:辐射 TC2 IEC 60034-18-22-2000 旋转电机第18-22部分:绝缘系统的功能性评定绕组线试验规程交换和绝缘组件置换的分类 IEC/TR 60034-18-34-2000 旋转电机第18-34部分:绝缘系统的功能评估绕组线的试验程序绝缘系统的热机械耐力性评估 TC9 IEC 60850-2000 铁路应用牵引系统的供电电压 IEC 61991-2000 铁路设备全部车辆防止触电危险的保护规定 TC14 IEC 60076-1-2000 电力变压器第1部分:总则 IEC 60076-3-2000 电力变压器第3部分 相似文献
9.
10.
针对ESIB40电磁干扰测量系统对同步机(VST-2型)进行传导发射测试过程中测量系统各种因数对测试结果一致性的影响,通过参考GB 4824-2004(CISPR112:003)、GB 9254-1998(CISPR22)等标准,开展对同步机传导发射测试技术的研究,来获取在ESIB40电磁干扰测量系统上传导发射预测试方法,并使用频谱分析仪进行测量结果的验证。 相似文献
11.
12.
Analysis of the internal electromagnetic compatibility of digitally controlled power converters is discussed. In particular, the optimum layout of the circuit configuration is designed on the basis of the actual electromagnetic interference between the power and the control section of a power converter. Besides, further improvements can be achieved by means of an auto- tuning additional board, which scans all the possible converter switching frequencies and analyses the distortion on the control signals corresponding to each frequency. Its main task is to select only the ones which produce low disturbances on the control signals as operating frequencies for the converter. 相似文献
13.
随着电磁兼容检测技术的发展和提高,人们正针对不同的电子电器产品寻求更为简单的检测方法。该文介绍采用TEM小室进行辐射骚扰测试和辐射抗扰度测试的方法,使小尺寸的电子电器产品的电磁兼容测试更加便捷。 相似文献
14.
15.
16.
《IEEE transactions on instrumentation and measurement》2006,55(5):1502-1508
This paper deals with the estimation of systematic and random contributions that could influence the measurement of conducted emissions by adjustable-speed electrical power drive systems. Aside from the uncertainty due to the measurement chain, the electromagnetic compatibility test arrangement was considered as a possible source of uncertainty since it could compromise both the result reliability and the compliance/noncompliance of a given apparatus. In order to completely identify all the uncertainty components, tests were carried out by varying a number of influencing configuration parameters. Their effects on the measurement results were evaluated for the most common inverter modulation techniques, and the measurement reproducibility was evaluated. 相似文献
17.
The electromagnetic compatibility of electric vehicles is not only the important technology issue in researches,development and industrialization of electric vehicles,but also the key research area of ... 相似文献
18.
19.
Effect of Spectrum Analyzer Filtering on Electromagnetic Dosimetry Assessment for UMTS Base Stations
Fayos-Fernandez J. Victoria-Gonzalez F. Martinez-Gonzalez A.M. Morote-Marco A. Sanchez-Hernandez D. 《IEEE transactions on instrumentation and measurement》2008,57(6):1154-1165
While many different measurement techniques and simulation tools are available to assess electromagnetic exposure for second-generation mobile communications base stations, few works have tackled the problem for downlink third-generation (3G) universal mobile telecommunications system (UMTS) signals. In this paper, deep analyses of the effect of spectrum analyzer (SA) filtering on 3G/UMTS field measurement for electromagnetic compliance assessment are presented. A procedure for evaluating compliance of frequency-division duplex 3G/UMTS Node B to electromagnetic safety limits, avoiding the use of a code-domain analyzer, is also presented and discussed. Adequate SA settings for exposure compliance testing are proposed, and an important relationship between resolution and video bandwidths is found, which dominates analyzer settings effects on final 3G/UMTS exposure assessment results. 相似文献