首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
《稀土》2015,(5)
采用静电纺丝技术制备了非晶态PVP/[Sr(NO3)2+Mg(NO3)2+TEOS+Eu(NO3)3+Dy(NO3)3]复合纳米纤维,在还原气氛下对其进行煅烧,得到了一维纳米结构的Sr2Mg Si2O7∶Eu2+,Dy3+发光纤维。对其热性能、物相结构、形貌结构及发光性能进行了表征。热分析表明,温度高于800℃时,复合纤维中的水分、有机物、硝酸盐分解挥发完全,样品不再失重;物相分析表明,经1100℃还原气氛焙烧后形成了发育良好的晶相Sr2Mg Si2O7∶Eu2+,Dy3+纳米纤维;形貌分析表明,Sr2Mg Si2O7∶Eu2+,Dy3+发光纳米纤维表面粗糙,平均直径约为350 nm,呈颗粒串珠结构;荧光光谱分析表明,在360 nm的近紫外光激发下,Sr2Mg Si2O7∶Eu2+,Dy3+纳米纤维发射出Eu2+特征的明亮的蓝光,发射峰位于468 nm;余辉衰减曲线表明,Sr2Mg Si2O7∶Eu2+,Dy3+纳米纤维在紫外光照射15 min后其初始余辉亮度达到0.32 cd/m2,肉眼可见。  相似文献   

2.
通过高温固相法合成了Sr2MgSi2O7∶Eu2+,Nd3+发光材料,测试了样品的物相结构、可见和近红外激发和发射光谱、荧光寿命等,研究了Eu2+对Nd3+的近红外发光性能的影响及近红外发光相对强度变化的规律,考察了煅烧温度、煅烧时间对近红外发光性能的影响。结果表明,1200℃下煅烧的Sr2MgSi2O7∶0.02Eu2+,0.01Nd3+样品近红外发光强度最强,Eu2+对Nd3+的近红外发光敏化效果最好。证实了在Sr2MgSi2O7∶Nd3+,Eu2+体系中Eu2+通过无辐射传递的模式向Nd3+有效传递了能量。  相似文献   

3.
采用凝胶-燃烧法在活性炭弱还原气氛下成功合成了高亮度蓝色发光材料Sr3 MgSi3 O10:Eu2+,Er3+.用X射线粉末衍射仪、荧光分光光度计对样品的物相结构和发光性质进行了分析和表征.结果表明,所合成的Sr3 MgSi3O10:Eu2+,Er3+的晶体结构与Sr2 MgSi2 O7的相似,属四方晶系.样品激发光谱是位于250 nm~450 nm的宽带,最大激发峰位于357 nm处;发射光谱也是一宽带,最强的发射峰位于466 nm处,属于Eu2+典型的4f65d1→4f7跃迁,呈蓝光发射.根据光谱测定结果和Van Uitert经验公式,推断Eu2+进入Sr3 MgSi3 O10基质后占据八配位Sr的格位.研究发现,共掺杂Er3+能有效敏化Sr3 MgSi3 O10基质中Eu2+的发光,当Er3+的掺杂摩尔分数为0.04时,样品发光强度最大,约为单掺Eu2+样品发光强度的3.3倍.  相似文献   

4.
以工业铝酸钠溶液制备的氢氧化铝为原料,采用高温固相反应法,分别制备了蓝绿色、黄绿色和桔红色三种长余辉发光材料,并采用X射线衍射仪测定样品的物相,荧光分光光度计测定样品的激发光谱和发射光谱。结果表明:前驱体反应物中Sr/Al摩尔比的改变使样品的晶体结构发生改变,从而影响其发光性能;当Sr/Al摩尔比分别为2/7、1/2、3/2时,合成样品依次为纯相Sr4Al14O25∶Eu2+,Dy3+、SrAl2O4∶Eu2+,Dy3+、Sr3Al2O6∶Eu2+,Dy3+,余辉颜色分别为蓝绿色、黄绿色和桔红色;制备的三种长余辉发光材料的激发光谱和发射光谱均属宽带光谱,日光灯、太阳光等自然光均可有效激发这三种材料;随着Sr/Al摩尔比的增大,最强激发峰由350nm红移到450nm,最强发射峰由460nm红移到600nm。  相似文献   

5.
廖亮  张玉奇  李治霞  李兴旺 《稀土》2006,27(2):26-29
采用燃烧法合成了新型红色长余辉发光材料Y2O3∶Eu3+,Ca2+,Ti4+.用X射线衍射仪表征了其结构;用荧光光谱仪测试了激发、发射光谱;以紫外-可见分光光度计测定分析了样品的反射光谱特征.XRD分析证实为立方相的Y2O3.激发光谱为一紫外区内的宽带谱,中心位于253nm,属于Eu3+-O2-的电荷迁移跃迁;发射光谱峰值位于613 nm,对应于Eu3+的5D0→7F2跃迁发射.由于掺杂离子不等价的取代Y3+,形成了电子陷阱和空穴陷阱,两者的复合作用延缓了余辉的衰减.紫外-可见反射光谱得到的结论与荧光激发光谱的结果一致.该样品在紫外线激发下余辉时间长达90分钟.  相似文献   

6.
通过高温固相法合成了Sr2 MgSi2O7:Eu2+,Nd3+发光材料,测试了样品的物相结构、可见和近红外激发和发射光谱、荧光寿命等,研究了Eu2+对Nd3+的近红外发光性能的影响及近红外发光相对强度变化的规律,考察了煅烧温度、煅烧时间对近红外发光性能的影响.结果表明,1200℃下煅烧的St2 MgSi2O7:0.02Eu2+,0.01Nd3+样品近红外发光强度最强,Eu2+对Nd3+的近红外发光敏化效果最好.证实了在Sr2 MgSi2O7:Nd3+,Eu2体系中Eu2+通过无辐射传递的模式向Nd3+有效传递了能量.  相似文献   

7.
以工业铝酸钠溶液制备的氢氧化铝为原料,采用高温固相反应法合成了Sr5Al2O7S∶Eu2+红色长余辉材料。用X射线衍射仪及荧光分光光度计对材料的物相及光谱性能进行了分析,考察稀土掺杂量对样品发光性能的影响。结果表明,在稀土激活剂的掺杂量x(Eu)=6%、硼酸加入量9%、1 200℃烧结8h的条件下合成的样品为Sr5Al2O7S∶Eu2+的纯相,激发光谱位于400~500nm,主发射波长在600nm左右,余辉为桔红色。  相似文献   

8.
The luminous polypropylene fiber based on long afterglow luminescent material Sr2MgSi2O7:Eu2+,Dy3+ was prepared by melt-spinning process. Micro-morphology, phase composition, crystal structure, spectral features and afterglow properties of the luminescent fiber were tested and analyzed. The results indicated that the fiber had independent superposition phase features of both Sr2MgSi2O7:Eu2+,Dy3+ and polypropylene. The range of its excitation wavelength was located between 250–450 nm; therefore, the luminescent fiber could be excited by ultraviolet or visible light. It could emit blue light of 460 nm wavelength after excitation, which was caused by the 5d-4f transition of Eu2+ ions within the host lattice. The initial luminescent intensity was more than 0.8 cd/m2, and afterglow life lasted 7 h. The afterglow decay was composed of rapid-decaying and slow-decaying processes, and the decay characteristics depended on the depth and concentration of trap level in the Sr2MgSi2O7:Eu2+,Dy3+.  相似文献   

9.
采用高温固相反应法制备了Sr0.9M0.1Al2O4:Eu2+,Dy3+(M=Mg,Ca,Ba)长余辉发光材料,并对其晶体结构、光谱性质、余辉特性进行了分析.X射线衍射测试结果表明,Mg2+,Ca2+,Ba2+离子部分取代SrAl2O4基质中的Sr后,基质晶体结构并没有发生改变.光谱测试结果表明,Mg2+,Ca2+,B...  相似文献   

10.
《稀土》2015,(1)
采用高温固相法制备了Sr3-x-y(Al1-zBz)2O6∶Eux2+,Dyy3+(x,y,z=0,0.1)长余辉发光粉。利用XRD测试仪、荧光分光光度计和热释光计量仪分别研究了Eu、Dy和B的掺杂对材料晶体结构、激发和发射光谱、余辉衰减特性和热释光光谱的影响。结果表明,Eu、Dy共掺杂的样品中Dy3+的掺杂有利于Eu3+还原为Eu2+。余辉曲线的拟合结果表明,Eu、Dy、B共掺的样品具有最好的余辉特性,这源于该样品具有最大的发光强度常数和时间衰减常数。Eu、Dy、B共掺样品的热释光曲线很好的由8个高斯峰拟合,分析了掺杂引入的缺陷类型及对应的热释光峰位,改进了长余辉发光材料电子转移发光模型。  相似文献   

11.
12.
13.
采用CaO -SiO2 -Na2 O -CaF2 -Al2 O3-MgO渣系 ,通过测定熔渣的粘度和Al2 O3吸收速率 ,研究连铸保护渣的Al2 O3吸收速率与粘度及化学成分之间的关系。在一定条件下 ,当CaO SiO2 为1 .2左右时 ,粘度达到最小值 ,Al2 O3吸收速率达到最大值 ,分别为 0 .1 0Pa·s、8.4 0 3× 1 0 - 4 kg·m- 2 ·s- 1 。随着渣中Na2 CO3含量、CaF2 含量和MgO含量的增加 ,粘度减小 ,Al2 O3吸收速率增大。随着渣中Al2 O3含量的增加 ,粘度增大 ,Al2 O3吸收速率减小。粘度为Al2 O3吸收速率的主要控制因素。随着熔渣粘度的增加 ,连铸保护渣的Al2 O3吸收速率逐渐减小。  相似文献   

14.
15.
The Gibbs energy changes for the syntheses of the interceramic compounds of BaCuO2 and BaCu2O2 were investigated as a basic study in the Y-Ba-Cu-O system that includes a superconductor, YBa2Cu3O6.5+x . For the compound BaCuO2, thermogravimetry with CO2-O2-N2 gas mixtures was employed, and equilibrium temperatures were determined at which CO2 partial pressures in the gas mixtures were equilibrated with mixed powder of BaCuO2, CuO, and BaCO3. The Gibbs energy change for the reaction of BaCO3 + CuO = BaCuO2 + CO2 was determined from the relation between CO2 partial pressure and equilibrium temperature, taking into consideration the effect of CO2 dissolution in BaCuO2. For the study on BaCu2O2, electromotive force (emf) measurement using yttria-stabilized zirconia solid electrolyte was conducted. A technique using two cells was applied to the emf measurement for minimizing the effect of dispersion of oxygen from samples, and the Gibbs energy change for the reaction of BaCuO2 + CuO = BaCu2O2 + 1/2O2 was decided from the measured O2 partial pressure.  相似文献   

16.
17.
2'-Azido-2'-deoxyuridine and 2'-azido-2'-deoxycytidine were evaluated for their inhibitory activity against ribonucleotide reductase and for subsequent cell growth inhibition. Their mono- and di-phosphates were synthesized and their inhibitory activities against the reductase were also determined in a permeabilized cell system, along with the two nucleosides. The results of the present study identify the first phosphorylation step involved in the conversion of the two azidonucleosides to the corresponding diphosphates to be rate-limiting in the overall activation.  相似文献   

18.
19.
An analysis of the Li2O-SiO2 and Li2O-GeO2 systems in the temperature range from 298 to 1373 K has been performed by Raman spectroscopy. A comparison of the spectroscopic data for the crystalline phases, glasses, and melts allowed us to determine the main anion groups existing in these systems and to establish the structural changes induced by changes in the temperature and composition.  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号