Photoelectrocatalytic properties of Ag nanoparticles loaded TiO2 nanotube arrays prepared by pulse current deposition

A pulse current deposition technique was adopted to construct highly dispersed Ag nanoparticles on TiO₂ nanotube arrays which were prepared by the electrochemical anodization. The morphology, crystallinity, elemental composition, and UV-vis absorption of Ag/TiO₂ nanotube arrays were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). In particular, the photoelectrochemical properties and photoelectrocatalytic activity under UV light irradiation and the photocatalytic activity under visible light irradiation for newly synthesized Ag/TiO₂ nanotube arrays were investigated. The maximum incident photon to charge carrier efficiency (IPCE) value of Ag/TiO₂ nanotube arrays was 51%, much higher than that of pure TiO₂ nanotube arrays. Ag/TiO₂ nanotube arrays exhibited higher photocatalytic activities than the pure TiO₂ nanotube arrays under both UV and visible light irradiation. The photoelectrocatalytic activity of Ag/TiO₂ nanotube arrays under UV light irradiation was 1.6-fold enhancement compared with pure TiO₂ nanotube arrays. This approach can be used in synthesizing various metal-loaded nanotube arrays materials.     

Oxidative energy storage behavior of a porous nanostructured TiO2–Ni(OH)2 bilayer photocatalysis system

TiO₂–Ni(OH)₂ bilayer electrodes were prepared by the cathodic electrodeposition of Ni(OH)₂ layer on a TiO₂/ITO substrate. The porous Ni(OH)₂ layers were obtained at relatively high current densities (≥1.0 mA cm⁻²), and the particle size increased with increasing the deposition current density. A porous nanostructured TiO₂–Ni(OH)₂ bilayer was obtained at a current density of 1.0 mA cm⁻². The effects of OH⁻ concentration in the electrolyte and surface structure in the Ni(OH)₂ layer on storage of the oxidative energy of TiO₂ were investigated. In our experimental conditions the oxidative energy storage of an UV-irradiated TiO₂ photocatalyst in Ni(OH)₂ was obviously enhanced in the electrolyte with 1.0 M OH⁻. The porous nanostructured TiO₂–Ni(OH)₂ bilayer electrode showed the notably improved oxidative energy storage performance, resulting from its porous structure and nanostructured Ni(OH)₂ particles. The TiO₂–Ni(OH)₂ bilayer electrode during UV irradiation exhibited much higher potentials and larger photocurrent than the TiO₂/ITO electrode. The transition from Ni(OH)₂ to NiOOH under UV irradiation proceeded in the potential range of −0.5 to −0.2 V, much more negative than the Ni(OH)₂/NiOOH redox potential. A possible mechanism on the oxidative energy storage of an UV-irradiated TiO₂ photocatalyst in Ni(OH)₂ was proposed, and the related experimental results were discussed in terms of the suggested model.     

Enhanced inactivation of E. coli bacteria using immobilized porous TiO2 photoelectrocatalysis

Immobilized TiO₂ nanotube electrodes with high surface areas were grown via electrochemical anodization in aqueous solution containing fluoride ions for photocatalysis applications. The photoelectrochemical properties of the grown immobilized TiO₂ film were studied by potentiodynamic measurements (linear sweep voltammetry), in addition to the calculation of the photocurrent response. The nanotube electrode properties were compared to mesoporous TiO₂ electrodes grown by anodization in sulfuric acid at high potentials (above the microsparking potential) and to 1 g/l P-25 TiO₂ powder. Photocatalyst films were evaluated by high resolution SEM and XRD for surface and crystallographic characterization. Finally, photoelectrocatalytic application of TiO₂ was studied via inactivation of E. coli. The use of the high surface area TiO₂ nanotubes resulted in a high photocurrent and an extremely rapid E. coli inactivation rate of ∼10⁶ CFU/ml bacteria within 10 min. The immobilized nanotube system is proven to be the most potent electrode for water purification.     

Cyclic voltammetry studies of TiO2 nanotube arrays electrode: Conductivity and reactivity in the presence of H and aqueous redox systems

In this paper, we use cyclic voltammetry to investigate the effect of protons on the conductivity and reactivity of TiO₂ nanotube array (NTA) electrodes in an aqueous redox system. The H⁺ ion can change the TiO₂ nanotube (anatase phase) surface states for electrons transfer. It can also act as an intermediate state for electron transfer to the acceptor species in the electrolyte surrounding the TiO₂. The higher the concentration of H⁺ ions in the aqueous electrolyte, the easier it is for the electrons transfer from the TiO₂ to the electrolyte oxidized species. The reduction is facile, with a similar reduction potential for various acceptor species, but re-oxidation is not possible. It is apparently an electrochemical reduction involving a single-proton transfer and single-electron transfer. Based on this conclusion, an electrode (PB/Au/TiO₂ NTAs) was fabricated by means of electrodeposition. The electrode used to detect hydrogen peroxide. The sensitivity of the detector is high, and its the detection limit can be as low as 100 nM.     

A pH sensor based on the TiO2 nanotube array modified Ti electrode

In this paper, a novel solid state pH sensor was fabricated by anodization of titanium substrate electrode. The relationship between pH sensitivity and hydrophilicity or surface morphology of TiO₂ film was investigated. Amorphous TiO₂ nanotube has better pH response than anatase TiO₂ nanotube. After being irradiated by ultraviolet light (UV), the potential response of the electrode modified by amorphous TiO₂ nanotube was close to Nernst equation (59 mV/pH). SEM, XRD, and XPS were used to characterize electrodes. Possible mechanism was discussed by analyzing surface hydroxyl groups, crystal structure and hydrophilicity of the electrodes. The electrode has been used to detect some kinds of soft drinks and shows good response.     

Effect of TiO2 doped Ni electrodes on the dielectric properties and microstructures of (Ba0.96Ca0.04)(Ti0.85Zr0.15)O3 multilayer ceramic capacitors

The effects of TiO₂-doped Ni electrodes on the microstructures and dielectric properties of (Ba_0.96Ca_0.04)(Ti_0.85Zr_0.15)O₃ multilayer ceramic capacitors (MLCCs) have been investigated. Nickel paste with a TiO₂ dopant was used as internal electrodes in MLCCs based on (Ba_0.96Ca_0.04)(Ti_0.85Zr_0.15)O₃ (BCTZ) ceramic with copper end-termination. The microstructures and defects were analysed by microstructural techniques (SEM/HRTEM) and energy-dispersive spectroscopy (EDS). The continuity of the electrode of the MLCC was measured using a scanning electron microscope, which showed that the continuity of the electrode for the MLCC with a TiO₂-doped Ni electrode was approximately 90%. However, continuity of the electrode for a conventional MLCC was below 80%. The continuity of the TiO₂-doped Ni electrode showed significant improvement in the MLCC, which was due to no reaction between Ni and BCTZ.     

A highly efficient ZnS/CdS@TiO2 photoelectrode for photogenerated cathodic protection of metals

Shell-core nanostructured ZnS/CdS quantum dots (QDs) were assembled uniformly on the surface of TiO₂ nanotube arrays by sequence chemical bath deposition (CBD) of CdS and ZnS in alcohol solution system. The morphology and chemical composition of the obtained composite thin films were characterized by scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. The effect of solvent and immersion cycles for the photoanode preparation on the photoelectrochemical activity and photogenerated cathodic protection property was investigated. It is found that the nanostructured CdS QDs (20 cycles) coated on TiO₂ nanotube arrays show a remarkably enhanced photoelectrochemical activity. The coating of ZnS QD shells (5 cycles) is able to improve the stability of the CdS@TiO₂ photoanode under white-light irradiation. After the irradiation light is turned off, the photogenerated cathodic protection of 403 stainless steel (403SS) can be remained for several hours.     

TiO2 micro-flowers composed of nanotubes and their application to dye-sensitized solar cells

TiO₂ micro-flowers were made to bloom on Ti foil by the anodic oxidation of Ti-protruding dots with a cylindrical shape. Arrays of the Ti-protruding dots were prepared by photolithography, which consisted of coating the photoresists, attaching a patterned mask, illuminating with UV light, etching the Ti surface by reactive ion etching (RIE), and stripping the photoresist on the Ti foil. The procedure for the blooming of the TiO₂ micro-flowers was analyzed by field emission scanning electron microscopy (FESEM) as the anodizing time was increased. Photoelectrodes of dye-sensitized solar cells (DSCs) were fabricated using TiO₂ micro-flowers. Bare TiO₂ nanotube arrays were used for reference samples. The short-circuit current (J_sc) and the power conversion efficiency of the DSCs based on the TiO₂ micro-flowers were 4.340 mA/cm² and 1.517%, respectively. These values of DSCs based on TiO₂ micro-flowers were higher than those of bare samples. The TiO₂ micro-flowers had a larger surface area for dye adsorption compared to bare TiO₂ nanotube arrays, resulting in improved J_sc characteristics. The structure of the TiO₂ micro-flowers allowed it to adsorb dyes very effectively, also demonstrating the potential to achieve higher power conversion efficiency levels for DSCs compared to a bare TiO₂ nanotube array structure and the conventional TiO₂ nanoparticle structure.     

Capability of coupled CdSe/TiO2 heterogeneous structure for photocatalytic degradation and photoconductivity

Highly ordered TiO₂ nanotube arrays (TiO₂-NTAs), with a uniform tube size on titanium substrate, were obtained by means of reoxidation and annealing. A composite structure, CdSe quantum dots@TiO₂ nanotube arrays (CdSe QDs@TiO₂-NTAs), was fabricated by assembling CdSe quantum dots into TiO₂-NTAs via cyclic voltammetry electrochemical deposition. The X-ray diffractometer (XRD), field-emission scanning electron microscope (SEM), and transmission electron microscope (TEM) were carried out for the determination of the composition and structure of the tubular layers. Optical properties were investigated by ultraviolet-visible spectrophotometer (UV-Vis). Photocurrent response under visible light illumination and photocatalytic activity of samples by degradation of methyl orange were measured. The results demonstrated that the photo absorption of the composite film shifted to the visible region, and the photocurrent intensity was greatly enhanced due to the assembly of CdSe QDs. Especially, photocurrent achieved a maximum of 1.853 μA/cm² after five voltammetry cycles of all samples. After irradiation under ultra violet-visible light for 2 h, the degradation rate of composition to methyl orange (MO) reached 88.20%, demonstrating that the CdSe QDs@TiO₂-NTAs exhibited higher photocatalytic activity.     

Synthesis and electrochemical properties of CeO2 nanoparticle modified TiO2 nanotube arrays

In this paper, a cerium dioxide (CeO₂) modified titanium dioxide (TiO₂) nanotube array film was fabricated by electrodeposition of CeO₂ nanoparticles onto an anodized TiO₂ nanotube array. The structural investigation by X-ray diffraction, scanning electron microscopy and transmission electron microscopy indicated that the CeO₂ nanoparticles grew uniformly on the walls of the TiO₂ nanotubes. The composite was composed of cubic-phase CeO₂ crystallites and anatase-phase TiO₂ after annealing at 450 °C. The cyclic voltammetry and chronoamperometric charge/discharge measurement results indicated that the CeO₂ modification obviously increased the charge storage capacity of the TiO₂ nanotubes. The charge transfer process at the surface, that is, the pseudocapacitance, was the dominate mechanism of the charge storage in CeO₂-modified TiO₂ nanotubes. The greater number of surface active sites resulting from uniform application of the CeO₂ nanoparticles to the well-aligned TiO₂ nanotubes contributed to the enhancement of the charge storage density.     

Diameter-sensitive biocompatibility of anodic TiO2 nanotubes treated with supercritical CO2 fluid

This work reports on the diameter-sensitive biocompatibility of anodic TiO₂ nanotubes with different nanotube diameters grown by a self-ordering process and subsequently treated with supercritical CO₂ (ScCO₂) fluid. We find that highly hydrophilic as-grown TiO₂ nanotubes become hydrophobic after the ScCO₂ treatment but can effectively recover their surface wettability under UV light irradiation as a result of photo-oxidation of C-H functional groups formed on the nanotube surface. It is demonstrated that human fibroblast cells show more obvious diameter-specific behavior on the ScCO₂-treated TiO₂ nanotubes than on the as-grown ones in the range of diameters of 15 to 100 nm. This result can be attributed to the removal of disordered Ti(OH)₄ precipitates from the nanotube surface by the ScCO₂ fluid, thus resulting in purer nanotube topography and stronger diameter dependence of cell activity. Furthermore, for the smallest diameter of 15 nm, ScCO₂-treated TiO₂ nanotubes reveal higher biocompatibility than the as-grown sample.     

Self-organized vanadium and nitrogen co-doped titania nanotube arrays with enhanced photocatalytic reduction of CO2 into CH4

Self-organized V-N co-doped TiO₂ nanotube arrays (TNAs) with various doping amount were synthesized by anodizing in association with hydrothermal treatment. Impacts of V-N co-doping on the morphologies, phase structures, and photoelectrochemical properties of the TNAs films were thoroughly investigated. The co-doped TiO₂ photocatalysts show remarkably enhanced photocatalytic activity for the CO₂ photoreduction to methane under ultraviolet illumination. The mechanism of the enhanced photocatalytic activity is discussed in detail.     

Conversion enhancement of flexible dye-sensitized solar cells based on TiO2 nanotube arrays with TiO2 nanoparticles by electrophoretic deposition

We prepared highly ordered titanium dioxide nanotube arrays (TNAs) by anodizing Ti foils in F⁻ containing electrolyte. The thickness and dye loading amount of TNAs were 26 μm and 1.06 × 10⁻⁷ mol cm⁻², respectively. TiO₂ nanoparticles (TNPs) were electrophoretically deposited on the inner wall of nanotube to produce coated nanotube arrays (TNAP). The dye loading was increased to 1.56 × 10⁻⁷ mol cm⁻², and the electron transport rate improved. TNAs and TNAP were sensitized with ruthenium dye N3 to yield dye-sensitized TiO₂ nanotube solar cells. The power conversion efficiency of TNA-based dye-sensitized solar cells (DSSCs) was 4.28%, whereas the efficiency of TNAP-based DSSCs increased to 6.28% when illuminated from the counter electrode. The increase of power conversion efficiency of TNAP-based DSSCs is ascribed to the increased surface area of TNAs and the faster electron transport rate.     

Effect of TiO2 nanotubes with TiCl4 treatment on the photoelectrode of dye-sensitized solar cells

In this study, we used the electrochemical anodization to prepare TiO₂ nanotube arrays and applied them on the photoelectrode of dye-sensitized solar cells. In the field emission scanning electron microscopy analysis, the lengths of TiO₂ nanotube arrays prepared by electrochemical anodization can be obtained with approximately 10 to 30 μm. After titanium tetrachloride (TiCl₄) treatment, the walls of TiO₂ nanotubes were coated with TiO₂ nanoparticles. XRD patterns showed that the oxygen-annealed TiO₂ nanotubes have a better anatase phase. The conversion efficiency with different lengths of TiO₂ nanotube photoelectrodes is 3.21%, 4.35%, and 4.34% with 10, 20, and 30 μm, respectively. After TiCl₄ treatment, the efficiency of TiO₂ nanotube photoelectrode for dye-sensitized solar cell can be improved up to 6.58%. In the analysis of electrochemical impedance spectroscopy, the value of R_k (charge transfer resistance related to recombination of electrons) decreases from 26.1 to 17.4 Ω when TiO₂ nanotubes were treated with TiCl₄. These results indicate that TiO₂ nanotubes treated with TiCl₄ can increase the surface area of TiO₂ nanotubes, resulting in the increase of dye adsorption and have great help for the increase of the conversion efficiency of DSSCs.     

Preparation of short, robust and highly ordered TiO2 nanotube arrays and their applications as electrode

The short, robust and highly ordered TiO₂ nanotube arrays (TNAs) electrode was prepared by sonoelectrochemical anodization of titanium in HF–H₂O electrolyte solution (referred as short TNAs, STNAs). The self-organized arrays of titania nanotubes of approximately 12–65 nm in diameter and 75–280 nm in length can be synthesized at anodic voltage of 5–20 V. The electron transport process within the STNAs electrode was much favorable in comparison with that for the long TNAs electrode synthesized by conventional magnetic agitation technique (referred as long TNAs, LTNAs), as confirmed by the obviously enhanced photocurrent response of STNAs electrode either in 0.02 M Na₂SO₄ electrolyte solution or in different concentrations of glucose solution or under different intensities of UV illumination. To investigate their photoelectrochemical applications, degradation of tetracycline, a typical pharmaceutical and personal care products (PPCPs), was carried out using photoelectrocatalytic (PEC) means, comparing with electrochemical (EC) and photocatalytic (PC) processes. The kinetic constant of the PEC process of STNAs electrode was 3.17 times as high as its PC process. The color removal rate of tetracycline by STNAs electrode achieved 81% within 3 h, which was 21% higher than that for LTNAs electrode. In degrading tetracycline, 41% of TOC was mineralized using the STNAs electrode against 23% using LTNAs electrode under similar conditions. Such kind of titania nanotubes will have many potential applications in various areas as an outstanding photoelectrochemical material.     

Properties of sol-gel SnO2/TiO2 electrodes and their photoelectrocatalytic activities under UV and visible light illumination

A visible light active binary SnO₂-TiO₂ composite was successfully prepared by a sol-gel method and deposited on Ti sheet as a photoanode to degrade orange II dye. Titanium and SnO₂ can promote the development of rutile phase of TiO₂ and inhibit the formation of anatase phase of TiO₂. Formation of SnO₂ crystalline is insignificant even when the calcination temperature increases to 700 °C. Heterogenized interface between SnO₂ and TiO₂ inhibits growth of TiO₂ linkage and leads to the particle-filled surface morphology of SnO₂-containing films. The carbonaceous, Ti-O-C bonds and Ti³⁺ species are likely to account for the photoabsorption and photoelectrocatalytic (PEC) activity under visible light illumination. The electrode with 30% SnO₂ exhibits higher photocurrent when compared with those in the region of 0-50%. The 600 °C-calcined SnO₂-TiO₂ electrode indicates higher activity when compared with those at 400, 500, 700 and 800 °C. PEC degradation of orange II follows the Langmuir-Hinshelwood model and takes place much effectively in a solution of pH 3.0 than those in pH 7.0 and pH 11.0.     

Efficient synthesis of titania nanotubes and enhanced photoresponse of Pt decorated TiO2 for water splitting

We investigated the effect of HMT (hexamethylenetetraamine) on the anodic growth of TiO₂ nanotube arrays. The tube length increases to 4.3 μm with HMT concentration increasing to 0.04 mol·L⁻¹. Adsorption of HMT on the TiO₂ surface is shown to markedly decrease the chemical dissolution rate of tube mouth, resulting in longer nanotube length. Furthermore, Pt nanoparticles were successfully deposited on the surface of TiO₂ nanotubes by ac electrodeposition method. The TiO₂/Pt composites were characterized by field emission scanning electron microscope (FESEM), X-ray photoelectron spectra (XPS), and photoelectrochemistry. An enhancement in photocurrent density has been achieved upon modification of TiO₂ nanotubes with Pt nanoparticles.     

Morphology and Microstructure of As-Synthesized Anodic TiO2 Nanotube Arrays

The as-grown structure of electrochemically synthesized titania nanotube arrays is investigated by scanning electron microscope (SEM) in combination with transmission electron microscope (TEM) as well as X-ray diffraction (XRD). The analysis reveals a preferred growth direction of the nanotubes relative to the substrate surface and the well control on the nanotube arrays morphology. The crystal structure of the anatase phase is detected and exists in the tube walls without any thermal treatment, which makes it possible to realize the application of as-formed TiO₂ nanotubes avoiding the degradation of the nanotube structures when sintering. In addition, a new growth, layered model of the anodic TiO₂ nanotubes is presented to obtain further understanding of the growth mechanism.     

Preparation and magnetic properties of iron titanium oxide nanotube arrays

FeTi alloy was prepared by a vacuum smelting method, iron titanium oxide nanotube arrays have been made directly by anodization of the FeTi alloy. Morphologies and microstructures of the samples were characterized by scanning electron microscope, transmission electron microscope, and X-ray diffractometer. Influences of temperature and H₂O concentration on the morphologies of the nanotube arrays have been discussed in detail. Magnetic properties of the samples have also been investigated. The as-prepared samples were amorphous. When annealed at 500 °C and 550 °C, pesudobrookite Fe₂TiO₅ was obtained. At 600 °C, there were mixed Fe₂TiO₅, rutile TiO₂, and α-Fe₂O₃. Magnetic performance of the nanotube arrays exhibited high sensitivity to temperature and changed interestingly upon annealing. The values of the coercivity and remanence were 340 Oe and 0.061 emu/g respectively for the sample annealed at 550 °C.     

Ni-doped TiO2 nanotubes for wide-range hydrogen sensing

Doping of titania nanotubes is one of the efficient way to obtain improved physical and chemical properties. Through electrochemical anodization and annealing treatment, Ni-doped TiO₂ nanotube arrays were fabricated and their hydrogen sensing performance was investigated. The nanotube sensor demonstrated a good sensitivity for wide-range detection of both dilute and high-concentration hydrogen atmospheres ranging from 50 ppm to 2% H₂. A temperature-dependent sensing from 25°C to 200°C was also found. Based on the experimental measurements and first-principles calculations, the electronic structure and hydrogen sensing properties of the Ni-doped TiO₂ with an anatase structure were also investigated. It reveals that Ni substitution of the Ti sites could induce significant inversion of the conductivity type and effective reduction of the bandgap of anatase oxide. The calculations also reveal that the resistance change for Ni-doped anatase TiO₂ with/without hydrogen absorption was closely related to the bandgap especially the Ni-induced impurity level.