Nonlinear Response of a Continuous Wave NMR Spectrometer for Samples with a Large Magnetization

We present a new insight in the response of a CW NMR spectrometer for highly magnetized samples above 100 MHz. The spectrometer is a bridge made of a magic T. The output of the bridge is proportional to the reflection coefficient, , of a resonant circuit, which is built with a coil containing the sample. The sensitivity of the reflection coefficient to the complex susceptibility of the sample, () = () – j(), depends on the quality factor, Q, of the circuit and filling factor, . When the condition Q 1 is not fulfilled, we show indeed that the use of a simple crystal detector, which is only sensitive to || gives rise to a strong nonlinear response of the spectrometer. Measurements of the complex value of by means of phase sensitive detection allow to recover a linear behavior. We discuss and illustrate those issues with a few circuits we designed for our measurements on liquid ³ He with spin polarizations up to 15 %. A method is described to build in a reproducible and predictable way resonant circuits matched to 50 in the frequency range 100 – 400 MHz with a quality factor as high as 1000 at 4 K.     

Nonlinear asymptotic theory of hypersonic flow past a circular cone

Summary The hypersonic small-disturbance theory is reexamined in this study. A systematic and rigorous approach is proposed to obtain the nonlinear asymptotic equation from the Taylor-Maccoll equation for hypersonic flow past a circular cone. Using this approach, consideration is made of a general asymptotic expansion of the unified supersonic-hypersonic similarity parameter together with the stretched coordinate. Moreover, the successive approximate solutions of the nonlinear hypersonic smalldisturbance equation are solved by iteration. Both of these approximations provide a closed-form solution, which is suitable for the analysis of various related flow problems. Besides the velocity components, the shock location and other thermodynamic properties are presented. Comparisons are also made of the zeroth-order with first-order approximations for shock location and pressure coefficient on the cone surface, respectively. The latter (including the nonlinear effects) demonstrates better correlation with exact solution than the zeroth-order approximation. This approach offers further insight into the fundamental features of hypersonic small-disturbance theory.Notation a speed of sound - H unified supersonic-hypersonic similarity parameter, - K hypersonic similarity parameter, M - M freestream Mach number - P pressure - T temperature - S entropy - u, v radial, polar velocities - V freestream velocity - shock angle - cone angle - density - density ratio, /() - ratio of specific heats - polar angle - stretched polar angle, / - (), (), () gage functions     

Martensitic transformations in Ti-Mo alloys

A detailed investigation has been made of the structure of alloys of the Ti-Mo system containing up to 10wt% Mo, water-quenched from the-phase region. With increase in molybdenum content, the martensite structure changes from hexagonal () to orthorhombic () at 4 wt% Mo, and at 10 wt% Mo, the structure is completely retained . For alloy compositions <4 wt% Mo, there is a diffusional component in the transformation of the -phase at the quench rates employed. There is a transition, with increase in molybdenum content, in morphology (from massive to acicular) and in substructure (from dislocations to twins). However, the transitions in crystallography, morphology and sub-structure are not directly related to one another except for an abrupt loss of dislocation substructure at the/ transition. The to crystallographic transition has the characteristics of a second order transformation, and evidence has been obtained of the existence of a spinodal within the metastable orthorhombic system. The orthorhombic martensites of Ti-6 and 8 wt% Mo decompose during quenching producing a fine modulated structure within the martensite plates, consistent with a proposed spinodal mode of decomposition.     

Simulation of the Process of Water Freezing in a Round Pipe

The problem of freezing of pure water in a round pipe is treated with due regard for convection under asymmetric thermal boundary conditions in the absence of motion along the pipe. The problem is solved numerically using the control volume approach, SIMPLER algorithm, and the enthalpy method. Results are obtained for three Grashof (Gr) and six Biot (Bi) numbers: Gr = 1.55 × 10⁶, Bi = 0.305 (0 < ), Bi = 0.044 ( < 2); Gr = 1.24 × 10⁷, Bi = 0.610 (0 < ), Bi = 0.087 ( < 2); Gr = 9.89 × 10⁷, Bi = 1.220 (0 < ), Bi = 0.174 ( < 2). The correctness of calculation of the problem disregarding free-convection flows is analyzed.     

Thermal Expansion and Isothermal Compressibility of TlIn1 – xNdxSe2 (0 ≤ x≤ 0.08) Crystals

The thermal expansion coefficient () and isothermal compressibility ( _T ) of TlIn_{1 – x} Nd _x Se₂(0 x 0.08) crystals were measured between 77 and 400 K. In the range 77–160 K, both and _T increase with temperature, the increase in being much steeper. At higher temperatures, and _T change very little. The observed composition dependences of and _T are interpreted in terms of energy-band structure.     

γ ? α2 Phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%)

The ₂ phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%) alloy has been studied by analytical electron microscopy. ₂ and phases were found at grain boundaries. ₂ layers that suspended in layers and interfacial ledge higher than 2d ₍₁₁₁₎ at /₂ interfaces were observed in the lamellar grains. These facts indicated that ₂ phase transformation and dynamic recrystallization have occurred during high temperature stress rupture deformation. It can be concluded that deformation induced ₂ phase transformation and dynamic recrystallization resulted in the presence of particles at grain boundaries. A structural and compositional transition area between deformation-induced ₂(or ) and its adjacently original (or ₂) phases was found by HREM and EDS and is suggested as a way to transform between and ₂ phase during high temperature stress rupture deformation. The transition area was formed by slide of partial dislocations on close-packed planes and diffusion of atoms.     

Energy loss distribution of charged particles in thin absorbers

Conclusions 1. For thin absorbers, the Landau theory incorporating certain above-listed corrections is a general-purpose one and is in good agreement with experiment both for heavy and light charged particles 0.01. 2. For intermediate layers (0.01 1 and 1), exact solutions are provided by the Vavilov theory [11]. 3. The numerical-analytic method of plotting the energy loss distribution function proposed in [13] is suitable for very thin ( 0.01) absorbers.Translated from Izmeritel'naya Tekhnika, No. 3, pp. 60–62, March, 1970.     

Effect of phase proportions on deformation and cavitation of superplastic α/β brass

Studies have been made, using metallographic and precision density techniques, of the deformation and cavitation behaviour during superplastic tensile straining at 873 K of three microduplex/ brasses which, as a consequence of varying composition, contained varying proportions of and phases. It was observed that both strain-rate sensitivity and elongation-to-failure passed through a maximum when approximately equivolume proportions of the two phases were present. Cavitation, on the other hand, decreased rapidly as the volume fraction of phase was increased. The cavitation behaviour was attributed to the relative abilities of the phases to accommodate grain boundary sliding. When a high proportion of phase is present accommodation is minimal and cavity nucleation. occurs readily. Evidence is presented to show that grain-boundary sliding plays a predominant role in cavity growth. When a high proportion of phase is present accommodation is almost complete and cavity nucleation is minimal.     

Thermal transport properties of helium near the superfluid transition. II. Dilute3He-4He mixtures in the superfluid phase

Measurements of the average thermal conductivity _exp hQ/T and of the thermal relaxation time to reach steady-state equilibrium conditions are reported in the superfluid phase for dilute mixtures of³He in⁴He. Hereh is the cell height,Q is the heat flux, andT is the temperature difference across the fluid layer. The measurements were made over the impurity range 2×10^–9<X(³He)<3×10^–2 and with heat fluxes 0.3<Q<160 µW/cm². Assuming the boundary resistanceR _b , measured forX<10^–5, to be independent ofX over the whole range ofX, a calculation is given for _exp. ForQ smaller than a well-defined critical heat fluxQ _c (X) X ^0.9, _exp is independent of Q and can be identified with the local conductivity _eff, which is found to be independent of the reduced temperature = (T–T)/T for –10^–2. Its extrapolated value at T is found to depart forX10^–3 from the prediction X ^–1 , tending instead to a weaker divergence X ^–a witha0.08. A finite conductivity asX tends to zero is not excluded by the data, however. ForQ >Q _c (X), a nonlinear regime is entered. ForX10^–6, the measurements with the available temperature resolution are limited to the nonlinear conditions, but can be extrapolated into the linear regime forX2×10^–7. The results for _exp(Q),Q _c (X), and _eff(XX) are found to be internally consistent, as shown by comparison with a theory by Behringer based on Khalatnikov's transport equations. Furthermore, the observed relaxation times (X) in the linear regime are found to be consistent forX>10^–5 with the hydrodynamic calculations using the measured _eff(X). ForX<10^–5, a faster relaxation mechanism than predicted seems to dominate. The transport properties in the nonlinear regimes are presented and unexplained observations are discussed.     

Fatigue crack growth behaviour of tungsten carbide-cobalt hardmetals

Fatigue crack propagation studies have been carried out on a range of WC-Co hardmetals of varying cobalt content and grain size using a constant-stress intensity factor double torsion test specimen geometry. Results have confirmed the marked influence of mean stress (throughK _max), which is interpreted in terms of static modes of fracture occurring in conjunction with a true fatigue process, the existence of which can be rationalized through the absence of any frequency effect. Dramatic increases in fatigue crack growth rate are found asK _max approaches that value of stress intensity factor ( 0.9K_IC) for which static crack growth under monotonic load (or static fatigue) occurs in these materials. Lower crack growth rates, however, produce fractographic features indistinguishable from those resulting from fast fracture. These observations, and the important effect of increasing mean free path of the cobalt binder in reducing fatigue crack growth rate, can reasonably be explained through a consideration of the mechanism of fatigue crack advance through ligament rupture of the cobalt binder at the tip of a propagating crack.     

On internal stress and activation volume in polymers

The two-site model is developed for the analysis of stress relaxation data. It is shown that the product of d In (– )/d and (- _i) is constant where is the applied stress, _i is the (deformation-induced) internal stress and = d/dt. The quantity d In ( )/d is often presented in the literature as the (experimental) activation volume, and there are many examples in which the above relationship with (- _i) holds true. This is in apparent contradiction to the arguments that lead to the association of the quantity d In (– )/d with the activation volume, since these normally start with the premise that the activation volume is independent of stress. In the modified theory presented here the source of this anomaly is apparent. Similar anomalies arise in the estimation of activation volume from creep or constant strain rate tests and these are also examined from the standpoint of the site model theory. In the derivation presented here full account is taken of the site population distribution and this is the major difference compared to most other analyses. The predicted behaviour is identical to that obtained with the standard linear solid. Consideration is also given to the orientation-dependence of stress-aided activation.     

Natural convection in a rectangular enclosure in the presence of a magnetic field with uniform heat flux from the side walls

Summary A numerical study is presented for magnetohydrodynamic free convection of an electrically conducting fluid in a two-dimensional rectangular enclosure in which two side walls are maintained at uniform heat flux condition. The horizontal top and bottom walls are thermally insulated. A finite difference scheme comprising of modified ADI (Alternating Direction Implicit) method and SOR (Successive-Over-Relaxation) method is used to solve the governing equations. Computations are carried out over a wide range of Grashof number, Gr and Hartmann number, Ha for an enclosure of aspect ratio 1 and 2. The influences of these parameters on the flow pattern and the associated heat transfer characteristics are discussed. Numerical results show that with the application of an external magnetic field, the temperature and velocity fields are significantly modified. When the Grashof number is low and Hartmann number is high, the central streamlines are elongated and the isotherms are almost parallel representing a conduction state. For sufficiently large magnetic field strength the convection is suppressed for all values of Gr. The average Nusselt number decreases with an increase of Hartmann number and hence a magnetic field can be used as an effective mechanism to control the convection in an enclosure.List of symbols Ar aspect ratio,H/L - B ₀ induction magnetic field - H ₀ magnetic field,H ₀=B ₀/ _m - g gravitational acceleration - Gr Grashof number,gq(L/k)L ³/v ² - H height of the enclosure - Ha Hartmann number, - k thermal conductivity - Nu local Nusselt number - average Nusselt number - p pressure - Pr Prandtl number, / - q heat flux - t time - T dimensionless temperature, (–₀)/q(L/k) - u vertical velocity - U dimensionless vertical velocity,uL/ - v horizontal velocity - V dimensionless horizontal velocity,vL/ - x vertical coordinate - X dimensionless vertical coordinate,x/L - y horizontal coordinate - Y dimensionless horizontal coordinate,y/L - thermal diffusivity - thermal expansion coefficient - temperature - ₀ reference temperature - density - kinematic viscosity - viscosity - _m magnetic permeability - electrical conductivity - stream function - dimensionless stream function, / - dimensionless time,t/L ² - vorticity - dimensionless vorticity, L ²/ - X grid spacing inX-direction - Y grid spacing inY-direction - time increment - ² Laplacian operator     

Complex microstructural changes in as-cast eutectoid Zn-Al alloy

Phase transformations and microstructural changes of an as-cast eutectoid Zn-Al alloy (ZnAl₂₂Cu₂) were investigated during isothermal holding. The typical dendritic structures consisted of _s phase as a core with the edge of decomposed _s phase and decomposed _s in the interdendritic regions. A series of complex phase transformations was observed. Both decompositions of _s and _s were determined at an early stage of ageing and a four-phase transformation, _f+T+, was observed at the boundaries of _f phase and the phase, instead of clearly observed at the boundaries of phase, in a solution-treated Zn-Al alloy during prolonged ageing.     

The Accuracy of Dielectric Measurements in a Cylindrical Cavity H01p Resonator

The error of measurements of the dielectric parameters and tan in a cylindrical cavity resonator supporting the H _01p mode by varying the length of the resonator at a constant resonance frequency is considered. The errors in measuring and tanare investigated numerically as a function of the electric thickness of the sample being investigated and its permittivity .     

Oxidation of an Al2O3-γAlON ceramic composite

The oxidation of dispersed aluminium oxynitride particles in an alumina matrix has been studied. The kinetics law of this reaction is linear and the activation energy is 420±40 kJ mol^–1 (100±10 kcal mo^–1). A-alumina layer is formed and leads to-alumina above 1200° C. The-alumina formation produces surface compressive stresses, and thus the mechanical properties ( _f, HV) are improved. We have proved that the formation of-alumina in the Al₂O₃-AION composite can lead to the best properties for this ceramic. A-alumina layer has a very interesting effect on the wear resistance of this material.     

Nonlinear axisymmetric response of orthotropic thin truncated conical and spherical caps

Summary An approximate analytical solution of the large deflection axisymmetric response of polar orthotropic thin truncated conical and spherical shallow caps is presented. Donnell type equations are employed. The deflection is approximated by a one term mode shape satisfying the boundary conditions. The Galerkin's method is used to get the governing equation for the deflection at the hole. Nonlinear free vibration response and the response under uniformly distributed static and step function loads are obtained. The effect of various parameters is investigated.Notations A, A ^* Inward and outward amplitudes - a, b, h Base radius, inner radius and thickness of the cap - D M h ³/[12(–v ² )] - E ,E Young's moduli - H ^*,H Apex height, dimensionless apex heght:H ^*/h - N _, Stress resultants - p ^1/2 - q Uniformly distributed load - Q,Q₀ Dimensionless load: , dimensionless step load - Q, Q ₀ Dimensionless load: , step load - t, Time, dimensionless time: t - T _A Ratio of nonlinear periodT for inward amplitudeA and the linear periodT _L - w ^* Normal displacement at middle surface - w Dimensionless displacement:w ^*/h - ₁ Linear parameter of static response - Orthotropic Parameter:E /E - Mass density - ₂,₃ Quadratic and cubic nonlinearity parameters - b/a - v ,v Poisson's ratios - Dimensionless radius:r/a - ^*, Stress function, dimensionless stress function: - ₀ ^* ,₀ Linnear frequency, dimensionless frequency: With 7 Figures     

A Monte Carlo Study of Disorder in the High Pressure Mixed Crystal N2-Ar

In order to obtain a better notion of the experimental results in our laboratory, Monte Carlo calculations have been performed of the N ₂-Ar crystal on the N ₂-rich side, in the p-T region where the and phases exist in pure N ₂. Considering the enthalpy, the system prefers the Ar atoms to be located on the sphere positions. The * phase is present for mixtures down to but is most likely metastable. The *-* transition shifts to lower temperatures with decreasing . The 2 ^nd order transition within the phase continues to exist to even smaller . In contrast to the * -* transition, the transition temperature for the 2 ^nd order transition does not shift to lower temperatures. For a mixture of it is within 5 K from the pure 2 ^nd order transition at a pressure of 7.0 GPa.     

Plastic deformation mode of retainedβ phase inβ-eutectoid Ti-Fe alloys

Plastic deformation mode of-eutectoid Ti-Fe alloys has been investigated at 300 and 77 K in a retained single phase (containing athermal phase). Surface analysis and transmission electron microscopy show that {332}1 1 3 twinning and 1 1 1 slip appear to be dependent on orientation, composition and deformation temperature. The {3 3 2} 1 1 3 twinning appears only in metastable regions adjacent to the M_s curve in good agreement with previous work in-isomorphous alloys. Orientation dependence for occurrence of the preferential {332} 1 1 3 twinning among the twelve equivalent twinning systems can be explained in terms of the Schmid factor and the polarization of twinning shear. It is concluded that the {332} <1 1 3 twinning is common for-titanium alloys and related to the instability of the phase.     

The age hardening effect in Ti-6 Al-4 V due to ω and α precipitation in the β grains

The structure at room temperature of a quenched TA6V titanium alloy has been investigated. This structure is + or + according to the treatment temperature; it is always metastable. During ageing the grains decomposed by the reaction + + +; this decomposition was accompanied by a large increase of the 0.2% yield stress. No structural modification was observed in. The and phase of TA6V were separately investigated in the form of single-phase alloys. The hardness of was insensitive to ageing, while was considerably hardened by and; we deduced that the strengthening of the minor phase during ageing is mainly responsible for the hardening of TA6V.     

Modern Problems of Intensification of Heat Exchange in Channels

The current achievements in the field of intensification of heat exchange in tube heatexchange apparatus are considered. Requirements for highefficiency heattransfer surfaces have been formulated. Problems of intensification of heat exchange in bundles of finned tubes and in heatexchange apparatus under conditions of condensation and boiling of heattransfer agents and under scaling conditions have been investigated. Highefficiency designs of heatexchange apparatus are presented.