Achieving efficient poly(3,4-ethylenedioxythiophene)-based supercapacitors by controlling the polymerization kinetics

In this study, we have prepared a series of poly(3,4-ethylenedioxythiophene) (PEDOT) with various molecular weight by using an inhibitor, imidazole (Im). The X-ray diffraction (XRD) results show that the PEDOT with larger molecular weight enhances the polymer chain ordering and stacking which leads to higher conductivity. With increasing the amount of Im, the conductivity of PEDOT can be increased from 4.01 S cm⁻¹ (Im = 0.0 M) to 153.6 S cm⁻¹ (Im = 1.8 M). Comparisons of the cyclic voltammetry (CV), it enables correlation between the conductivity and specific capacitance, which is important for understanding the electrochemical capacitive behavior of conjugated polymer for pseudo-capacitor application. The PEDOT prepared with 1.8 M Im shows a specific capacitance of 124 F g⁻¹, which is 2.2 times larger than the one without Im (57 F g⁻¹).     

Electrochemical characterization of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated thiophenes

Sulfonated thiophenes, sodium 2-(3-thienyloxy)ethanesulfonate (C₆H₇S₂O₄Na) and sodium 6-(3-thienyloxy)hexanesulfonate (C₁₀H₁₅S₂O₄Na), were synthesized and used in the fabrication of ion-selective electrodes (ISEs) sensitive and selective to Ag⁺. The Ag⁺-ISEs were prepared by galvanostatic electropolymerization of 3,4-ethylenedioxythiophene (EDOT) on glassy carbon (GC) electrodes, with either C₆H₇S₂O₄⁻ or C₁₀H₁₅S₂O₄⁻ as the charge compensator (doping ion) for p-doped poly(3,4-ethylenedioxythiophene) (PEDOT). Potentiometric measurements were carried out with these sensors, GC/PEDOT(C₆H₇S₂O₄⁻) and GC/PEDOT(C₁₀H₁₅S₂O₄⁻), to study and compare their sensitivity and selectivity to silver ions. PEDOT(C₆H₇S₂O₄⁻) and PEDOT(C₁₀H₁₅S₂O₄⁻) films were also studied by using other techniques such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), electrochemical quartz crystal microbalance (EQCM) and Fourier transform infrared spectroscopy (FTIR).Results from the potentiometric measurements showed that the difference in length of the alkyl chain of the doping ions C₆H₇S₂O₄⁻ and C₁₀H₁₅S₂O₄⁻ has no significant effect on the sensitivity or selectivity of GC/PEDOT(C₆H₇S₂O₄⁻) and GC/PEDOT(C₁₀H₁₅S₂O₄⁻) sensors to Ag⁺. More differences can be seen in the cyclic voltammograms and EIS spectra of the sensors. FTIR spectra confirmed that both C₆H₇S₂O₄⁻ and C₁₀H₁₅S₂O₄⁻ act as doping ions in the electrosynthesis of PEDOT-based films and they are not irreversibly immobilized in the polymer backbone.     

Different steps in the electrosynthesis of poly(3,4-ethylenedioxythiophene) on platinum

The initial stages of poly(3,4-ethylenedioxythiophene) (PEDOTh) film growth on platinum electrodes from TBAClO₄/acetonitrile solution are investigated by means of current-time transient measurements and tapping mode atomic force microscopy. It is shown that, for growth potentials in the range 1.17-1.29 V vs. SCE, the deposition process involves the formation of oligomers in the solution, progressive nucleation of centres of the new phase and three-dimensional growth of a first compact layer followed by a non-uniform distribution of granular-like clusters, whose number and size increase with the synthesis potential and charge. The obtained results reveal that PEDOTh films prepared at distinct potentials but with the same growth charge (Q_g) display similar electroactivities. They also depict that the electrochemical behaviour of the films is a function of the charge used for the synthesis, namely the reduction of tick PEDOTh layers (Q_g > 20 mC cm⁻²) includes more that one step, as a consequence of the formation of a two-layered polymer film.     

Organic–inorganic composites consisted of poly(3,4-ethylenedioxythiophene) and Prussian Blue analogues

The organic–inorganic material consisted of poly(3,4-ethylenedioxythiophene) (pEDOT) and copper hexacyanoferrate (Cuhcf) was synthesized. The pEDOT film with Fe(CN)₆^3−/4− as counter-ions potentiodynamically polarized in aqueous CuCl₂ electrolyte brings about stable hybrid material (pEDOT/Cuhcf) performing single redox activity of Fe^II/III at a formal potential E_f = 0.61 V (vs. Ag/AgCl/0.1 M KCl) and less clearly shaped two redox coming from copper ions entrapped inside the film. XPS ex situ measurements show three different binding energies for copper (Cu 2p_3/2: 932.2, 934.8 and 936.3 eV) and two for iron (Fe 2p_3/2: 708.2 and 709.0 eV). Spectroelectrochemical measurements allowed to establish an order in the energy band gap (E_g) for the investigated hybrids pEDOT/Mehcf (Me = Fe, Co, Ni, Cu) as follows: E_{g(pEDOT/Fehcf)} = 1.40 eV < E_{g(pEDOT/Cohcf)} = 1.48 eV < E_{g(pEDOT/Nihcf)} = 1.52 eV < E_{g(pEDOT/Cuhcf)} = 1.6 eV. The hybrid materials were examined as electrodes for electrocatalytic reduction of H₂O₂. Copper centres in pEDOT/Cuhcf as well as high spin iron centres in pEDOT/Fehcf were found to be electrocatalytically active towards hydrogen peroxide reduction.     

Redox behavior and optical response of nanostructured poly(3,4-ethylenedioxythiophene) films grown in a camphorsulfonic acid based micellar solution

Poly(3,4-ethylenedioxythiophene) (PEDOT) films have been electropolymerized from an aqueous micellar solution comprising camphorsulfonic acid (CSA), lithium trifluoromethanesulfonate (LiCF₃SO₃) and EDOT. The inclusion of the dopants CS⁻ and CF₃SO₃⁻ in the polymer structure and an unusually high doping level of 0.54 have been ascertained by the X-ray photoelectron spectroscopy. Transmission electron microscopy and atomic force microscopy studies show that the micellar effect of CSA leads to a morphology wherein polymer particles link together to form elongated shapes and also endows the film with a surface roughness of 25-30 nm. These nanostructures permit a facile intercalation-deintercalation of anions in the film during redox cycling. Electrochemical impedance spectroscopy show that the charge transfer phenomenon at the PEDOT-electrolyte interface is dominant in the high frequency region and diffusion controlled ionic movement prevails in the low frequency regime. The use of these films as potential cathodes in electrochromic windows is rationalized not only on the basis of their high scalability and ease of processing but also due to their large coloration efficiency (123 cm² C⁻¹) and transmission modulation (50%) at a photopic wavelength of 550 nm. But further improvement in color-bleach kinetics and reproducibility of redox behavior is desirable to broaden their spectrum of utility.     

Electrochemical synthesis and structural studies of polypyrroles, poly(3,4-ethylene-dioxythiophene)s and copolymers of pyrrole and 3,4-ethylenedioxythiophene on carbon fibre microelectrodes

Polypyrrole, poly(3,4-ethylenedioxythiophene) and the copolymer of pyrrole and 3,4-ethylenedioxythiophene films were synthesized electrochemically on carbon fibre microelectrodes (CFME). Deposition conditions on the carbon fibre and the influence of monomer concentrations on the copolymerization, as well as the electrochemistry of the resulting polymers and copolymers, were studied. Structural studies of the polymers were conducted using different techniques such as cyclic voltammetry, in situ spectroelectrochemistry, FTIR and scanning electron microscopy. The effect of the monomer ratio on the formation of copolymer is reported. A high level of stability to overoxidation was also observed for poly(3,4-ethylenedioxythiophene) as the polymer on this CFME substrate shows limited degradation of its electroactivity at potentials 1.2 V above its half-wave potential.     

Synthesis and electrochemical capacitance of core-shell poly (3,4-ethylenedioxythiophene)/poly (sodium 4-styrenesulfonate)-modified multiwalled carbon nanotube nanocomposites

A noncovalent method was used to functionalize multiwalled carbon nanotubes with poly (sodium 4-styrene sulfonate). And then, the core-shell poly (3,4-ethylenedioxythiophene)/functionalized multiwalled carbon nanotubes (PEDOT/PSS-CNTs) nanocomposite was successfully realized via in situ polymerization under the hydrothermal condition. In the process, PSS served for not only solubilizing and dispersing CNTs well into an aqueous solution, but also tethering EDOT monomer onto the surface of CNTs to facilitate the formation of a uniform PEDOT coating. Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) were used to characterize the resultant PEDOT/PSS-CNTs. In addition, the PEDOT/PSS-CNTs nanocomposite (50 wt.% PEDOT) had a specific capacitance (SC) of 198.2 F g⁻¹ at a current density of 0.5 A g⁻¹ and a capacitance degradation of 26.9% after 2000 cycles, much better than those of pristine PEDOT and PEDOT/CNTs (50 wt.% PEDOT). The enhanced electrochemical performance of the PEDOT/PSS-CNTs nanocomposite (50 wt.% PEDOT) should be attributed to the high uniform system of the nanocomposite, resulting in the large surface easily contacted by abundant electrolyte ions through the three-dimensional conducting matrix.     

Electrosynthesis and spectroelectrochemical characterization of poly(3,4-dimethoxy-thiophene), poly(3,4-dipropyloxythiophene) and poly(3,4-dioctyloxythiophene) films

Poly(3,4-dialkoxythiophene) films with different length of alkyl chain (1,3 and 8 carbon atoms) were obtained on Pt and ITO electrodes from the monomer solutions in acetonitrile by cyclic voltammetry (CV). The properties of the resulting films were studied by electrochemical methods, UV-Vis, FTIR and NMR spectra. The CVs were correlated with differential cyclic voltabsorptograms (DCVA) recorded at the absorption maxima to explain the shape of the voltammograms of the polymers studied, dependent on the alkyl-chain length in alkoxy group. The presence of the zones of different crystallinity in the polymer film was postulated. Significant influence of the type of the solvent on asymmetry of the cyclic voltammograms for the polymer doping-undoping has been discussed in terms of the solvent interaction with radical cation (polaron) delocalized on the alkoxy side groups. The polaron delocalization was proved by ¹H-NMR spectra. Appearance of infrared activated vibrations (IRAVs) in the range 1500-600 cm⁻¹ and a characteristic electronic band at 3300 cm⁻¹ at the polarization potential +0.25 V versus Ag/Ag⁺ and their gradual changes upon further polymer oxidation were interpreted in terms of evolution of different charge carriers in lightly and heavily doped polymer.     

Controllable preparation of poly(alkylene carbonate)s and observation on their structure-related odd-even effect

The primary aim of this paper is to explore the influence of the number of CH₂ groups per -(CH₂)_nOCOO- repeat unit (Num_c) on the properties of poly(alkylene carbonate)s. A series of poly(alkylene carbonate)s with different Num_c, including PTMC (Num_c = 3), PTeMC (Num_c = 4), PPMC (Num_c = 5), PHMC (Num_c = 6) and PDMC (Num_c = 10) were investigated for that purpose by DSC and XRD techniques. The method of Sn(Oct)₂-catalyzed ring-opening polymerization was developed to prepare poly(pentamethylene carbonate)s (PPMC), which presented a controllable feature. Regarding crystallization rate and Tm of poly(alkylene carbonate)s, an interesting odd-even effect was first reported related to the Num_c. The order of crystallizing ability of poly(alkylene carbonate) was: PTMC (Num_c = 3) < PPMC(Num_c = 5) < PTeMC (Num_c = 4) < PHMC (Num_c = 6) < PDMC (Num_c = 10). Poly(alkylene carbonate)s characterized with even Num_c appeared to readily crystallize relative to that with odd Num_c.     

Development and characterisation of a novel composite electrode material consisting of poly(3,4-ethylenedioxythiophene) including Au nanoparticles

Composite material consisting of poly(3,4-ethylenedioxythiophene) (PEDOT), including Au nanoparticles encapsulated by N-dodecyl-N,N-dimethyl-3-ammonium-1-propanesulphonate (SB12) is synthesised by constant-current method on ITO glass, in aqueous medium, leading to an electrode coating. The synthesis process is followed by UV-vis spectroelectrochemistry, both in normal-beam and in parallel-beam configurations. Under the same experimental conditions PEDOT is also synthesised by electropolymerisation only in the presence of LiClO₄ supporting electrolyte, as well in solutions also containing SB12. The data relative to the electrosynthesis of the three materials are compared. The composite material based on the conductive polymer matrix including Au nanoparticles has been characterised by SEM, TEM, ICP, Raman and UV-vis spectroscopies. The behaviour of the three different electrode coatings with respect to p-doping process has been studied by conventional electrochemical techniques and by potentiostatic and potentiodynamic UV-vis spectroelectrochemical methods. Conclusions are drawn out about the effect of the presence of the surfactant and of Au nanoparticles on the electrochemical properties of the electrode system.     

Accumulation of Cu(II) cations in poly(3,4-ethylenedioxythiophene) films doped by hexacyanoferrate anions and its application in Cu-selective electrodes with PVC based membranes

Electrochemical properties of poly(3,4-ethylenedioxythiophene) doped with hexacyanoferrate(II,III) ions (PEDOT(HCF)) were studied in the presence of Cu²⁺ ions. Voltammetric and EDAX studies revealed retention of hexacyanoferrate anions in the polymer film and accumulation of Cu(II) cations, as well as formation of solid copper hexacyanoferrate near the polymer surface.Accumulation of Cu²⁺ ions was found to be advantageous from the point of view of PEDOT(HCF) applications as a solid contact (ion-to-electron transducer) in all-solid-state Cu²⁺-selective electrodes with solvent polymeric polyvinyl chloride (PVC) based membrane, containing Cu²⁺-selective ionophore. Binding of Cu²⁺ ions in the conducting polymer layer results in analyte ions flux into the transducer phase. Thus, pronounced enhancement of selectivity of the all-solid-state Cu²⁺-selective electrode or lower detection limit of the potentiometric response range was achieved, reaching under optimised conditions 10⁻⁷ M CuSO₄.     

On the p-doping of PEDOT layers in various ionic liquids studied by EQCM and acoustic impedance

Poly(3,4-ethylenedioxythiophene) (PEDOT) films have been polymerized in several ionic liquids on the polycrystalline gold electrode of an electrochemical quartz crystal microbalance (EQCM) at 25 °C and 85 °C. Under cyclic potential variation, the EQCM resonance frequency decreased in the anodic potential region, indicating that the p-doping process is accompanied by the incorporation of anions. Elastic shear moduli G′, G″ - calculated from acoustic impedance measurements - were about 10⁷ Pa, values that are 2 orders of magnitude higher than for PEDOT polymerized in acetonitrile solutions. This difference is explained by the stiffening of the film by incorporated charged species because of the absence of a neutral molecular solvent plasticizing the film.     

Electrochromic performance of a poly(3,4-ethylenedioxythiophene)-Prussian blue device encompassing a free standing proton electrolyte film

Electrochromic devices incorporating an electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) film and a free standing, transparent film of a proton conducting polymer electrolyte with high ambient temperature ionic conductivity of 10⁻² S cm⁻¹ have been fabricated with and without the ion storage electrodeposited Prussian blue (PB) counter electrode layer. While coloration efficiency increases as a function of applied potential in the sole PEDOT device with largest values of CE_(max,VIS) ∼ 120 cm² C⁻¹ and CE_(max,NIR) ∼ 133 cm² C⁻¹ attained at V_c = −1.9 V, the PEDOT:PB device shows a digression from this trend. Much higher coloration efficiencies in the visible (247 cm² C⁻¹ at 570 nm) and NIR (116 cm² C⁻¹ at 1100 nm) regions are achieved for the PEDOT:PB device at a relatively lower reducing voltage of −0.8 V. The PEDOT:PB device shows fast switching redox process (t_c = 2.6 s and t_b = 1.3 s for a 50% optical contrast at 632.8 nm) and a highly reversible charge density as the ratio of Q_inserted to Q_extracted was found to vary between 0.8 and 1.0. When switched between the clear and blue states for 2000 cycles, the insignificant drop in peak current density maxima observed for the PEDOT:PB device, i.e. the good cycling stability, the facile fabrication of device assembly, the ease of scaling up the electrolyte and electrochromic coatings, indicate that this method can be adapted as a simple and inexpensive alternative to conventional electrochromic windows with high cost components.     

Theoretical analysis on the geometries and electronic structures of coplanar conjugated poly(azomethine)s

In this study, theoretical analysis on the geometries and electronic properties of various conjugated poly(azomethine)s is reported. The theoretical ground-state geometry and electronic structure of the studied poly(azomethine)s are optimized by the hybrid density functional theory (DFT) method treated in periodic boundary conditions at the B3LYP level of theory with 6-31G basis set. The geometry and electronic structure of poly(1,4-phenylenemethylidyneitrilo-1,4-phenylene-nitrilomethylidyne) (PPI) are compared with those of poly(p-phenylene vinylene) (PPV) or polyazine (PAZ). The theoretical results suggest the non-coplanar conformation of PPI but PPV and PAZ with a coplanar conformation. The electronic properties of PPI are in the intermediate between PPV and PAZ. The non-coplanar conformation of PPI could be released if the phenylene ring is replaced by the five-member ring of 3,4-ethylenedioxythiophene (PEEI), pyrrole (PYYI), thiophene (PTTI), furan (PFFI), or thiadiazole (PThThI). The theoretical E_g of PEEI, PYYI, PFFI, and PTTI are in the range of 1.11-1.67 eV, which is due to the coplanar configuration or donor-acceptor intrachain charge transfer. However, the large bond length alternation or lack of charge transfer characteristic makes the PThThI with a larger E_g of 2.47 eV than others. The trend on the IP or EA of the studied conjugated poly(azomethine)s are consistent with the electronic characteristic of the aromatic ring. The upper valence bandwidth of the studied five-member ring based poly(azomethine)s except PThThI is in the range of 562-613 meV, which is larger than that of PPI (247 meV) or PPV (373 meV). The results suggest that the electronic properties of conjugated poly(azomethine)s could be varied through various ring structure. The proposed new coplanar conjugated poly(zomethine)s can be potentially used as transparent conductors or thin film transistors.     

Electrochemical and spectroelectrochemical study on bilayer films composed of C60 and poly(3,4-ethylenedioxythiophene) PEDOT

Bilayers of drop casted C₆₀ fullerene films and electrochemically synthesized poly(3,4-ethylenedioxythiophene) (PEDOT) films have been studied. The PEDOT film was polymerised by cyclic voltammetry on top of the drop casted C₆₀ fullerene film. The bilayer films were produced and characterized in three different electrolytes; tetrabutylammoniumhexafluorophosphate (TBAPF₆) and lithium hexafluorophosphate (LiPF₆) in acetonitrile (ACN) and in the ionic liquid 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIMBF₄). The bilayers were studied by cyclic voltammetry and in situ Fourier transform infrared attenuated total reflection (FTIR-ATR) spectroscopy. Both p- and n-doping of the bilayer films were studied and compared with PEDOT films prepared in organic media.     

Miscibility and phase behavior of poly(D,L-lactide)/poly(p-vinylphenol) blends

The miscibility of poly(D ,L -lactide) (PDLLA) and poly(p-vinylphenol) (PVPh) blends has been studied by differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR). Phase separation was observed in blends over a wide composition range. A PDLLA-rich phase was found to coexist with an almost pure PVPh phase. The quenched blend samples showed two glass transitions (T_gs), except for a blend with a low PVPh content. However, the T_g value of the PDLLA-rich phase showed a gradual increase with increasing PVPh content. No evidence of interassociation (hydrogen bond formation) between PDLLA and PVPh was found by FTIR. The phase behavior of the blends was simulated using an association model. The results suggested that the equilibrium constant of interassociation between PDLLA and PVPh was small. The phase compositions of the two separated phases were calculated using Fox, Gordon-Taylor, and Couchman equations. The amount of PVPh in the PDLLA-rich phase increased with increasing PVPh content in the blend. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 811–816, 1998     

Controlled fabrication of multilayered 4-(pyrrole-1-yl) benzoate supported poly(3,4-ethylenedioxythiophene) linked hybrid films of Prussian blue type nickel hexacyanoferrate

The ability of 4-(pyrrole-1-yl) benzoic acid (PyBA) to form monolayer-type carboxylate-derivatized ultra-thin organic films on solid electrode surfaces was explored here to attract coordinatively and immobilize Ni²⁺ ions at the electrode/electrolyte interface. In the next step, the system was exposed to Fe(CN)₆³⁻ or Fe(CN)₆⁴⁻ solution to form a robust nickel hexacyanoferrate (NiHCF) layer. By repeated and alternate treatments in solutions of PyBA, Ni²⁺ cations, and Fe(CN)₆³⁻ or Fe(CN)₆⁴⁻ anions, the amount of the material could be increased systematically in a controlled fashion to form three-dimensional multilayered NiHCF-based assemblies. The layer-by-layer method was also extended to the growth of hybrid conducting polymer stabilized NiHCF films in which the initial PyBA-anchored NiHCF layer (formed on glassy carbon) was subsequently exposed (a desired number of times) through alternate immersions to the monomer (3,4-ethylenedioxythiophene), Fe(CN)₆³⁻ and Ni²⁺ solutions. During voltammetric potential cycling (electropolymerization) in the external supporting electrolyte solution, poly(3,4-ethylenedioxythiophene) or PEDOT linked NiHCF-based multilayered films were produced. They were characterized by good stability and high dynamics of charge transport.     

Synthesis, characterization and photoelectrochemical properties of poly(3,4-dioctyloxythiophene)-CdS hybrid electrodes

CdS-poly(3,4-dioctyloxythiophene) (CdS-PDOT) hybrid electrode has been prepared by electrosynthesis of PDOT on Au substrate followed by electrodeposition of Cd and its chemical transformation into CdS. The polymer and semiconductor obtained by this method form hemispherical structures dispersed on the substrate. The synthesized composites were characterized by UV-vis absorption spectra and energy dispersive X-ray spectra (EDS). The AFM images of the electrodes covered with different amounts of each component were correlated with photoactivity of the hybrid electrodes. Photoresponses of Au/PDOT-CdS electrodes under illumination in aqueous solution of Na₂S were also compared with those of CdS without polymer. Enhancement of the photocurrent achieved for some polymer-to-semiconductor ratio is discussed in terms of the hybrid electrode morphology and hole-mediating properties of PDOT. The power conversion efficiency of the device based on CdS-PDOT hybrid electrode was determined from photocurrent-potential behavior of two electrode system, Au/CdS-PDOT/0.1 M Na₂S/Pt with a variable resistance in series in the external circuit.     

Electropolymerization of 3,4-ethylenedioxythiophene, N-ethylcarbazole and their mixtures in aqueous micellar solution

Electropolymerization by cyclic voltammetry and chronoamperometry of N-ethylcarbazole (ETCZ) and 3,4-ethylenedioxythiophene (EDOT) was carried out in water-methanol (v/v: 1/3 0.01 M sodium dodecylsulfate (SDS) and 1.25 M perchloric acid on platinum button electrodes. Methanol improves the ethylcarbazole solubility and allows a well defined polymer growth on the working electrode. The SDS makes easier the ETCZ and EDOT electropolymerization. Indeed, the presence of micelles decreases the monomer oxidation potential and induces an acceleration of the polymerization. ETCZ and EDOT have similar monomer oxidation potentials in this medium. Moreover their polymers show a better stability than the polymers obtained without surfactants. Therefore, electropolymerization mixtures of these monomers was carried out with different ratios (v/v, 70/30, 50/50 and 30/70) in order to prepare copolymers and the resulting products were characterized by electrochemistry, IR and UV-visible spectroscopy and SEM.