Comparison of YAG: Eu phosphor synthesized by supercritical water and solid-state methods in a batch reactor

Phosphor yttrium aluminum garnet (Y₃Al₅O₁₂, YAG) doped with Eu (10 at%) was synthesized by supercritical water (SCW) and solid-state methods in a batch reactor. The crystals, morphologies and luminescent properties of the phosphors obtained from different pH conditions in the SCW were studied. Pure YAG phase was successfully synthesized at the alkaline condition in the SCW without formation of intermediate phases, while the size and luminescent property of YAG: Eu were strongly affected by pH condition. The luminescent intensity of YAG: Eu by the SCW method without further thermal treatment is stronger than that by the solid-state method with thermal treatment.     

Synthesis of nano-sized YAG:Eu phosphor in continuous supercritical water system

Luminescent yttrium aluminum garnet (Y₃Al₅O₁₂) nanoparticles doped with Eu (YAG:Eu³⁺) were continuously synthesized by directly feeding potassium hydroxide solution and metal salt solution to supercritical water (SCW). Effects of Eu concentration, pH, and residence time on photo-luminescence were studied using a continuous tubular reactor. Residence time played a key role in producing single-phase YAG:Eu³⁺ nanoparticles. The residence time of 20 s under SCW conditions (400 °C and 280 bar) was enough to form YAG:Eu³⁺ phosphor without any intermediate phases. At this residence time, the Eu concentration and pH condition under SCW contributed to improving the size, morphology and luminescent property of YAG: Eu³⁺ nanoparticles. The average size of the prepared phosphor nanoparticles at 10 at.% and pH of 9.10 was 74 nm and the morphology was identified as nearly uniform and spherical-like in shape. Without further thermal treatment, the phosphor YAG:Eu³⁺ synthesized in the continuous reactor under SCW conditions showed strong luminescence properties and red emission spectra.     

Layered Ceramic Phosphors Based on CaAlSiN3:Eu and YAG:Ce for White Light‐Emitting Diodes

To develop warm‐white light‐emitting diodes via conversion phosphors, blue light‐emitting diodes are generally combined with mixtures of green and red‐emitting phosphor powders. Generally, the phosphors are provided by resin embedded particle dispersions. Such resin‐based solutions cause several drawbacks with respect to LED lifetime and quality. Therefore, it has been investigated whether the red‐emitting nitride phosphor CaAlSiN₃:Eu and the green‐emitting oxidic phosphor YAG:Ce can be cofired to layered ceramic composites. The shrinkage behavior and the composition of the interface in dependence of sintering temperature and the effect of interdiffusion processes at the interface on the luminescence properties were investigated. The formation of secondary phases at the interface in the cofired structures was found to limit the phosphor functionality for the nitride‐based CaAlSiN₃:Eu in such composite ceramics. To counteract this, sacrificial interlayers were introduced to produce multilayered ceramics comprising CaAlSiN₃:Eu and YAG:Ce for LED lighting applications. It is shown for the first time, that it is possible to sinter layered CaAlSiN₃:Eu and YAG:Ce composite ceramics in a pressureless process at moderate sintering temperatures if one uses thin‐film passivated interfaces to reduce luminescence‐disturbing diffusion phenomena. These results demonstrate that diffusion barriers can be suitable means to obtain layered ceramic composites comprising CaAlSiN₃:Eu and YAG:Ce in a pressureless sintering process with good optical properties.     

Sol–gel pyrolysis and photoluminescent characteristics of europium-ion doped yttrium aluminum garnet nanophosphors

Europium-ion doped Y₃Al₅O₁₂ garnet nanophosphors (YAG:Eu³⁺) with wide ranging size tunability (40–150 nm) have been prepared via a sol–gel pyrolysis method employing a fuel system that combined urea and polyvinyl alcohol (PVA). Well dispersed nanoparticles were prepared at 1000 °C. This temperature is lower than that required for synthesizing YAG:Eu³⁺ via the solid-state reaction route. The particle size and morphology of the synthesized powders are found to have critical dependence on the oxidizer (metallic nitrates) to fuel ratio. The importance of using an organic polymeric dispersion matrix to obtain well dispersed YAG:Eu³⁺ nanoparticles has been demonstrated. The photoluminescene properties of the prepared YAG:Eu³⁺ phosphors are profoundly dependent on the preparation conditions. The emission intensity of well dispersed YAG:Eu³⁺ nanoparticles is found to be much stronger than that of the bulk sample. The excitation spectrum of well dispersed nanoparticles shows an extension of the excitation peak in the high-energy region. These unique properties of YAG:Eu³⁺ nanoparticles can be rationalized by considering numerous surface states due to the large surface area to volume ratio of the nanoparticles. In addition, using the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ as a local probe, the role of surface states that modify the optical properties of YAG:Eu³⁺ nanophosphors has also been illustrated.     

Luminescence properties of Eu activated Ba2Si5N8 red phosphors with various Eu contents

This study was carried out to characterize the crystal structure and luminescence properties of Eu²⁺ doped red-emitting Ba₂Si₅N₈ phosphor. In this research, Ba₂Si₅N₈ phosphors with various Eu compositions were prepared by normal pressure sintering (NPS). Ba₃N₂, Si₃N₄ and Eu₂O₃ were sintered at a high temperature in a mixture of N₂ and H₂. The crystal structure was analyzed by X-ray diffraction(XRD), and the photoluminescence(PL) properties of the Eu²⁺ - activated Ba₂Si₅N₈ phosphors were evaluated as a function of the Eu²⁺ activator concentration. The red-emitting Ba₂Si₅N₈ phosphors showed a broad excitation band range as well as high quantum output.     

Coating Gd2O3:Eu phosphors with silica by solid-state reaction at room temperature

Silica coating on Gd₂O₃:Eu particles was obtained by a simple method, e.g. solid-state reaction at room temperature. The urea homogeneous precipitation method was used to synthesize the Gd₂O₃:Eu cores. Transmission electron microscopy (TEM) shows that the core particles are spherical with submicrometer size which is the soft agglomerates with nanometer crystallites. The TEM morphology of coated particles shows that a thin film is coated on the surface of Gd₂O₃:Eu cores. Scanning electron microscopy (SEM) and energy-dispersive spectrometer (EDS) analysis indicate that the coating of silica can be used to avoid agglomeration of Gd₂O₃:Eu particles to obtain smaller particles. X-ray photoelectron spectra (XPS) show that silica is coated on the surface of core particles by forming the chemical bond. Photoluminescence (PL) spectra conform that Gd₂O₃:Eu phosphors remain well-luminescent properties by the silica coating.     

Fluorescence improvement of Ba1.3Ca0.7SiO4:Eu,Mn phosphors via Dy addition and their color-tunable properties

A series of novel single-phase white phosphors Ba_1.3Ca_0.69−x−ySiO₄:0.01Eu²⁺,xMn²⁺, yDy³⁺ were synthesized by the solid-state method. The excitation spectra of these phosphors exhibit a broad band in the range of 260–410 nm, which can meet the application requirements for near-UV LED chips (excited at 350–410 nm). The emission spectra consist of two broad bands positioned around 455 nm and 596 nm, which are assigned to 5d→4f transition of Eu²⁺, and ⁴T₁→⁶A₁ transition of Mn²⁺, respectively. The luminescence intensity of phosphors enhances obviously by doping Dy³⁺ ions, and the intensity of two bands reaches an optimum when Dy³⁺ amounts to 2 mol%. In addition, thermoluminescence investigation of phosphor was conducted, getting two shallow trap defects with activation energy of 0.43 eV and 0.45 eV, which demonstrates the energy transfer mechanism of Dy–Eu through the process of hole and electron traps. By precisely tuning the Mn²⁺ content, an optimized white light with color rendering index (CRI) of R_a=84.3%, correlated color temperature (CCT) of T_c=8416 K and CIE chromaticity coordinates of (0.2941, 0.2937) is generated. The phosphor could be a potential white phosphors for near-UV light emitting diodes.     

Synthesis and optical characterization of novel Sr3Ga2O6:Eu phosphor

Alkaline earth metal gallets have been identified as an important ceramic material. The crystal chemistry of many of these gallets is well explored; however, very rare studies regarding optical properties of rare earth (RE) ions doped in such gallets, particularly in Sr₃Ga₂O₆ host, have been carried out. The present study reports on synthesis and characterization of novel Sr₃Ga₂O₆:Eu³⁺ phosphors. The phosphors have been synthesized using a conventional solid state reaction method. Crystal structure, morphology and luminescence properties (excitation, emission and CIE coordinate) of these phosphors have been studied as a function of sintering temperature and Eu³⁺ concentration. X-ray diffraction study reveals that the phosphor sintered at low temperature (900 °C) contains an impurity phase which is removed at higher sintering temperatures and results into cubic crystalline phase of Sr₃Ga₂O₆. Particle size of the phosphor increases with an increase in sintering temperature which results to a red shift in the peak position of excitation band lying in a broad range from 250 to 370 nm. Optimum emission intensity is attained for 0.12 mol% concentration of Eu³⁺ ions; above this concentration, a quenching in emission intensity is observed.     

Synthesis of LiNi1/3Co1/3Mn1/3O2 cathode materials by using a supercritical water method in a batch reactor

LiNi_1/3Co_1/3Mn_1/3O₂ and LiCoO₂ cathode materials were synthesized by using a supercritical water (SCW) method with a metal salt solution in a batch reactor. Stoichiometric LiNi_1/3Co_1/3Mn_1/3O₂ was successfully synthesized in a 10-min reaction without calcination, while overlithiated LiCoO₂ (Li_1.15CoO₂) was synthesized using the batch SCW method. The physical properties and electrochemical performances of LiNi_1/3Co_1/3Mn_1/3O₂ were compared to those of Li_1.15CoO₂ by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and charge/discharge cycling tests. The XRD pattern of LiNi_1/3Co_1/3Mn_1/3O₂ was found to be similar to that of Li_1.15CoO₂, showing clear splitting of the (0 0 6)/(1 0 2) and (1 0 8)/(1 1 0) peak pairs as particular characteristics of the layered structure. In addition, both cathode powders showed good crystallinity and phase purity, even though a short reaction time without calcination was applied to the SCW method. The initial specific discharge capacities of the Li_1.15CoO₂ and LiNi_1/3Co_1/3Mn_1/3O₂ powders at a current density of 0.24 mA/cm² in 2.5-4.5 V were 149 and 180 mAh/g, and their irreversible capacity loss was 20 and 17 mAh/g, respectively. The discharge capacities of the Li_1.15CoO₂ and LiNi_1/3Co_1/3Mn_1/3O₂ powders decreased with cycling and remained at 108 and 154 mAh/g after 30 cycles, which are 79% and 89% of the initial capacities. Compared to the overlithiated LiCoO₂ cathode powders, the LiNi_1/3Co_1/3Mn_1/3O₂ cathode powders synthesized by SCW method had better electrochemical performances.     

Color-tunable properties of Eu3+- and Dy3+-codoped Y2O3 phosphor particles

Rare-earth phosphors are commonly used in display panels, security printing, and fluorescent lamps, and have potential applications in lasers and bioimaging. In the present study, Eu³⁺- and Dy³⁺-codoped uniform-shaped Y₂O₃ submicron particles were prepared using the urea homogeneous precipitation method. The structure and morphology of the resulting particles were characterized by X-ray diffraction, field emission scanning electron microscope, and field emission transmission electron microscope, whereas their optical properties were monitored by photoluminescence spectroscopy. The room-temperature luminescence color emission of the synthesized particles can be tuned from red to yellow by switching the excitation wavelength from 254 to 350 nm. The luminescence intensities of red and yellow emissions could be altered by varying the dopant concentration. Strong quenching was observed at high Eu³⁺ and Dy³⁺ concentrations in the Y₂O₃ host lattice.     

Synthesis of Zn2SnO4 anode material by using supercritical water in a batch reactor

Zn₂SnO₄ anode powders were successfully synthesized using supercritical water (SCW) and metal salt solutions with 10 min reaction time. Effect of NaOH concentration, Zn to Sn ratio, and synthesis temperature were studied with a SCW batch reactor. X-ray diffraction (XRD), scanning electron microscopy (SEM), and charge/discharge cycling tests were employed to characterize the physical properties and electrochemical performance of the as-prepared samples. Alkaline solution concentration and synthesis temperature played a key role in the production of single-phase Zn₂SnO₄ powders. At a solution concentration of 0.3 M NaOH and a molar ratio of Zn:Sn = 2:1 at 400 °C and 30 MPa, the average size range of the pure Zn₂SnO₄ powders was 0.5-1.0 μm, and the morphology was nearly uniform and cubic-like in shape. The initial specific discharge capacity of the Zn₂SnO₄ powders prepared at this condition was 1526 mAh/g at a current density of 0.75 mA/cm² in 0.05-3.0 V, and their irreversible capacity loss was 433 mAh/g. The discharge capacities of the Zn₂SnO₄ powders decreased with cycling and remained at 856 mAh/g after 50 cycles, which was 56% of the initial capacity.     

Strontium aluminate/polymer composites: Morphology,luminescent properties,and durability

Phosphor‐based polymer composites were prepared using a melt mixing and extrusion method. Morphology, luminescent properties, and Hamburg wheel test (HWT) of synthesized hybrid material were studied using various polymer matrices. The intensities of the luminescence of the strontium aluminates phosphors (SrAl₂O₄ : Eu,Dy and Sr₄Al₁₄O₂₅ : Eu,Dy) were substantially changed when incorporated into structurally and chemically different organic matrices. HWTs were performed to evaluate the durability of the polymers against simulated wheel loads and the effect of these wheel loads on the luminosity of the polymers. The decay slopes of various polymer–phosphor composites suggests that the simulated wheel load of the Hamburg test did not have a profound effect on the luminosity as such but the duration of luminescence was found to be shorter for the polymer–phosphor hybrid after the Hamburg test. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Spectral dependency of Eu2+-activated silicate phosphors on the composition for LED application

An Sr₂SiO₄-Ba₂SiO₄ material system doped by Eu²⁺ was studied for light emitting diodes (LEDs) application. The main concern was the precise control of excitation and emission spectra for maximum light yield and color coordinate, which was carried out by changing the composition of the alkaline earth ions in host lattice. The Sr₂SiO₄ : Eu-Ba₂SiO₄ : Eu system was found to be excellent for white LED applications with excitation in the 380–465 nm region. Especially, the yellow light intensity from (Sr,Ba)SiO₄ : Eu phosphors was comparable to YAG : Ce phosphors in case of blue LED excitation.     

Multifuctional Fe3O4@C/YVO4:Dy nanopowers: Preparation,luminescence and magnetic properties

As-synthesized Fe₃O₄ nanoparticles were encapsulated with carbon layers through a simple hydrothermal process. Fe₃O₄/C nanoparticles were coated with YVO₄:Dy³⁺ phosphors to form bifunctional Fe₃O₄@C@YVO₄:Dy³⁺ composites. Their structure, luminescence and magnetic properties were characterized by XRD, SEM, TEM, HRTEM, PL spectra and VSM. The experimental results indicated that the as-prepared bifunctional composites displayed well-defined core–shell structures. The ∼12 nm diameter YVO₄:Dy³⁺ shell exhibited tetragonal structure. Additionally, the composites exhibited a high saturation magnetization (13 emu/g) and excellent luminescence properties, indicating their promising potential as multifunctional biosensors for biomedical applications.     

Crystalline morphology and photoluminescent properties of YInGe2O7:Eu phosphors prepared from microwave and conventional sintering

This paper describes an investigation of the crystalline morphology and photoluminescent properties of YInGe₂O₇:Eu³⁺ powders using microwave assisted sintering. For comparison, the properties of YInGe₂O₇:Eu³⁺ powders sintered at 1200 °C in conventional furnace for 10 h were also investigated. X-ray powder diffraction analysis confirmed the formation of monoclinic YInGe₂O₇ without second phase or phases of starting materials as YInGe₂O₇:50 mol% Eu powders sintered at 1200 °C in microwave furnace for 1 h. Scanning electron microscopy showed smaller particle size and more uniform grain size distributions are obtained by microwave assisted sintering. In the PL studies, both microwave sintered and conventionally sintered powders emitted a maximum luminescence centered at 620 nm under excitation of 393 nm with similar luminescent intensity. The results show that microwave processing has the potential to reduce the time and required energy input for the production of YInGe₂O₇:Eu³⁺ phosphors without sacrificing the photoluminescence.     

Effect of strontium and phosphorus source on the structure,morphology and luminescence of Sr5(PO4)2SiO4:Euphosphor prepared by solid-state reaction

Sr₅(PO₄)₂SiO₄:Eu²⁺ phosphosilicate phosphor was prepared by high temperature solid-state reaction. Effects of strontium sources (strontium oxide, strontium nitrate and strontium carbonate) and of phosphorus sources (diammonium phosphate, strontium monophosphate) on the reactivity of their mixture during heating and on phase composition, morphology and photoluminescence excitation and emission properties of the phosphors were investigated by TG–DTG–DSC, XRD, SEM and photoluminescence spectroscopy. The sequence of the solid-state reactions when using the different starting reagents was discussed based on the TG–DTG–DSC results. It was found that it is hard to prepare pure Sr₅(PO₄)₂SiO₄:Eu²⁺ phosphor with either of strontium sources studied when stoichiometric (NH₄)₂HPO₄ was used as a phosphorus source. Minor Sr₂SiO₄ impurity phase was present in the phosphors. The content of impurity phase, the morphology and resultant photoluminescence properties of the phosphors were markedly influenced by the strontium source employed. When SrCO₃ was used as the strontium source, the phase purity of the phosphor was improved with the addition of excess (NH₄)₂HPO₄. When (NH₄)₂HPO₄with 5% excess or SrHPO₄ in stoichiometric ratio was used as the phosphorus source a pure phase phosphor was obtained. In addition, the morphology and photoluminescence of the phosphor were also influenced by phosphorus source. The possible reasons causing different properties of the phosphors prepared using different raw materials were discussed based on reaction schemes.     

Influence of inorganic salt on morphology,particle size,and luminescence properties of lanthanide ions doped Na0.5Gd0.5MoO4 microcrystals

A variety of tetragonal Na_0.5Gd_0.5MoO₄ microcrystals with different morphologies, dimensions, side lengths, and heights (microplates, tetragonal, and quasi-cubic structures) have been synthesized by a novel inorganic salt assisted hydrothermal approach. The influence of the addition of inorganic salt NaNO₃ on the phase structure, morphology, particle size, and luminescence performance of the samples has been systematically studied for the first time. A series of Na_0.5Gd_0.5MoO₄:Ln³⁺ (Ln = Eu, Tb, Dy, Sm, Yb/Er, Yb/Tm, Yb/Ho) phosphors with excellent down-conversion or up-conversion luminescence properties have been synthesized by doping proper rare earth activator ions into the host matrix. The addition of inorganic salt NaNO₃ and the calcination process can greatly improve the luminescence performances of the phosphors, which can be ascribed to the decrease of surface area and enhanced crystallinity of the Na_0.5Gd_0.5MoO₄ crystals. The as-obtained down-conversion and up-conversion multicolor luminescent materials show the intense characteristic emissions of Ln³⁺ and eminent thermal stability. Moreover, the corresponding LED devices fabricated by the phosphors display dazzling multicolor emissions, which directly verifies that the as-synthesized phosphors may have the prospect to be utilized in the field of optoelectronic devices and LEDs.     

Dy and Eu activated Ca3B2O6 phosphors for near ultraviolet‐based light‐emitting diodes

The Dy‐ and Eu‐activated Ca₃B₂O₆ phosphors were synthesized by a high‐temperature solid‐state reaction technique and their structural and luminescent properties were investigated. The phosphors are characterized by X‐ray diffraction, photoluminescence spectra, and Commission International de I'Eclairage (CIE) chromaticity coordinates. It is found that the charge compensator Na⁺ plays an important role in modifying the emission spectral profiles of Dy and Eu ions in the phosphors. The ratio of the emission located at the yellow wavelength portion to that located at the blue wavelength region of the Dy³⁺ ions can be apparently tuned by changing the Na⁺ content. The luminescence intensity of the phosphors can be enhanced with introducing Na⁺ ions as well. The emission colors of Dy/Eu codoped phosphors change from blue to white and successfully acquire the superior white light emission (x = 0.330, y = 0.329) by appropriately tuning the Na⁺/Dy³⁺ content and the excitation wavelength. The energy transfer process from Eu²⁺ to Dy³⁺ and Eu³⁺ occurs in the Dy/Eu codoped phosphors, providing a further approach to modify the emission spectral profile of the examined phosphors. The phosphors presented here have promising applications in the fields of light‐emitting diodes.     

红色荧光粉Ca2La8Si6O26:Eu的制备和性能

采用高温固相法合成新型CaeLasSi6O26:Eu红色荧光粉,利用X射线衍射、扫描电镜及荧光光谱对其进行了表征.结果表明:合成的Ca2LasSi6O26:Eu属于六角晶系,可被近紫外光(394 nm)和蓝光(464 nm)有效激发,发射峰值位于614 nm(对应于Eu3+的5D0→7F2跃迁),激发波长与目前广泛使用...     

Luminescent properties of a novel afterglow phosphor Sr3Al2O5Cl2:Eu,Ce

A series of Eu²⁺ and Ce³⁺ doped/co-doped Sr₃Al₂O₅Cl₂ afterglow phosphors that presented various bright colors were successfully synthesized via high temperature solid state reaction. The structure and luminescence properties of the obtained samples were characterized by X-ray powder diffraction (XRD), photoluminescence (PL) spectra and decay curves as well as the thermoluminescence (TL) glow curves. The XRD results showed that all the phase could be indexed to the orthorhombic structure with the space group P2₁2₁2₁. After being exposed to a 254 nm or 365 nm mercury lamp, blue/yellow-orange afterglow emissions with broad bands peaking around 620 nm/435 nm, which were ascribed to the characteristic 4f⁶5d–4f⁷/5d¹–4f¹ transitions of Eu²⁺/Ce³⁺, could be observed in phosphors of Sr₃Al₂O₅Cl₂:Eu²⁺/Sr₃Al₂O₅Cl₂:Ce³⁺, respectively. Because of the overlap spectral range between the Sr₃Al₂O₅Cl₂:Eu²⁺ and Sr₃Al₂O₅Cl₂:Ce³⁺ phosphors, the energy transfer (ET) from Ce³⁺ to Eu²⁺ occurred. The related ET process was discussed in detail. Moreover, the incorporation of Ce³⁺ could significantly prolong the afterglow duration of Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor, which was due to the increase of trap concentration. Consequently, 6 h of the afterglow duration could be observed in Sr₃Al₂O₅Cl₂:1.0%Eu²⁺, 0.5%Ce³⁺ sample, exhibiting much longer than that of Sr₃Al₂O₅Cl₂: 1.0%Eu²⁺ (3 h). From the afterglow decay curves and the fitting results, the optimal concentration of Ce³⁺ for the enhanced afterglow property was experimentally determined to be 0.5%.