Integrated lipidomics in the secreted phospholipase a(2) biology

Mammalian genomes encode genes for more than 30 phospholipase A(2)s (PLA(2)s) or related enzymes, which are subdivided into several subgroups based on their structures, catalytic mechanisms, localizations and evolutionary relationships. More than one third of the PLA(2) enzymes belong to the secreted PLA(2) (sPLA(2)) family, which consists of low-molecular-weight, Ca(2+)-requiring extracellular enzymes, with a His-Asp catalytic dyad. Individual sPLA(2) isoforms exhibit unique tissue and cellular localizations and enzymatic properties, suggesting their distinct pathophysiological roles. Recent studies using transgenic and knockout mice for several sPLA(2) isoforms, in combination with lipidomics approaches, have revealed their distinct contributions to various biological events. Herein, we will describe several examples of sPLA(2)-mediated phospholipid metabolism in vivo, as revealed by integrated analysis of sPLA(2) transgenic/knockout mice and lipid mass spectrometry. Knowledge obtained from this approach greatly contributes to expanding our understanding of the sPLA(2) biology and pathophysiology.     

A Study of the Crystallization, Melting, and Foaming Behaviors of Polylactic Acid in Compressed CO2

The crystallization and melting behaviors of linear polylactic acid (PLA) treated by compressed CO₂ was investigated. The isothermal crystallization test indicated that while PLA exhibited very low crystallization kinetics under atmospheric pressure, CO₂ exposure significantly increased PLA’s crystallization rate; a high crystallinity of 16.5% was achieved after CO₂ treatment for only 1 min at 100 °C and 6.89 MPa. One melting peak could be found in the DSC curve, and this exhibited a slight dependency on treatment times, temperatures, and pressures. PLA samples tended to foam during the gas release process, and a foaming window as a function of time and temperature was established. Based on the foaming window, crystallinity, and cell morphology, it was found that foaming clearly reduced the needed time for PLA’s crystallization equilibrium.     

Molecular basis of phospholipase A2 inhibition by petrosaspongiolide M

Petrosaspongiolide M (PM) is an anti-inflammatory marine metabolite that displays a potent inhibitory activity toward group II and III secretory phospholipase A(2) (PLA(2)) enzymes. The details of the mechanism, which leads to a covalent adduct between PLA(2) and gamma-hydroxybutenolide-containing molecules such as PM, are still a matter of debate. In this paper the covalent binding of PM to bee venom PLA(2) has been investigated by mass spectrometry and molecular modeling. The mass increment observed for the PM-PLA(2) adduct is consistent with the formation of a Schiff base by reaction of a PLA(2) amino group with the hemiacetal function (masked aldehyde) at the C-25 atom of the PM gamma-hydroxybutenolide ring. Proteolysis of the modified PLA(2) by the endoprotease LysC followed by HPLC MS analysis allowed us to establish that the PLA(2) alpha-amino terminal group of the Ile-1 residue was the only covalent binding site for PM. The stoichiometry of the reaction between PM and PLA(2) was also monitored and results showed that even with excess inhibitor, the prevalent product is a 1:1 (inhibitor:enzyme) adduct, although a 2:1 adduct is present as a minor component. The 2:1 adduct was also characterized, which showed that the second site of reaction is located at the epsilon -amino group of the Lys-85 residue. Similar results in terms of the reaction profile, mass increments, and location of the PLA(2) binding site were obtained for manoalide, a paradigm for irreversible PLA(2) inhibitors, which suggests that the present results may be considered of more general interest within the field of anti-inflammatory sesterterpenes that contain the gamma-hydroxybutenolide pharmacophore. Finally, a 3D model, constrained by the above experimental results, was obtained by docking the inhibitor molecule into the PLA(2) binding site through AFFINITY calculations. The model provides an interesting insight into the PM-PLA(2) inhibition process and may prove useful in the design of new anti-inflammatory agents that target PLA(2) secretory enzymes.     

Effectiveness of the preparation of maleic anhydride grafted poly (lactic acid) by reactive processing for poly (lactic acid)/carbon nanotubes nanocomposites

An effective strategy to increase the properties of poly (lactic acid) (PLA) is the addition of carbon nanotubes (CNT). In this work, aiming to improve the surface adhesion of PLA and CNT a new compatibilizer agent was prepared by reactive processing, PLA grafted maleic anhydride (PLA-g-MA) using benzoyl peroxide and maleic anhydride. The effectiveness of the PLA-g-MA as a compatibilizer agent was verified for PLA/PLA-g-MA/CNT nanocomposites. PLA and PLA-g-MA samples were characterized by Fourier transform infrared spectroscopy (FT-IR) to confirm the grafting reaction of maleic anhydride on PLA chains and by rheological analysis to prove the changes in the matrix PLA after the graphitization reaction. Thermal (differential scanning calorimetry and thermogravimetric analysis), mechanical tests (Izod impact strength and tensile test), and morphological characterization were used to verify the effect of the compatibilizer agent. The preparation of PLA-g-MA by reactive extrusion processing proved satisfactory and the nanocomposites presented good thermal and mechanical properties. The addition of the PLA-g-MA also contributed to the greater distribution of CNT and can be used as an alternative for the production of PLA/CNT nanocomposites.     

Cobalt Alleviates GA-Induced Programmed Cell Death in Wheat Aleurone Layers via the Regulation of H2O2 Production and Heme Oxygenase-1 Expression

Heme oxygenase-1 (HO-1) and hydrogen peroxide (H₂O₂) are key signaling molecules that are produced in response to various environmental stimuli. Here, we demonstrate that cobalt is able to delay gibberellic acid (GA)-induced programmed cell death (PCD) in wheat aleurone layers. A similar response was observed when samples were pretreated with carbon monoxide (CO) or bilirubin (BR), two end-products of HO catalysis. We further observed that increased HO-1 expression played a role in the cobalt-induced alleviation of PCD. The application of HO-1-specific inhibitor, zinc protoporphyrin-IX (ZnPPIX), substantially prevented the increases of HO-1 activity and the alleviation of PCD triggered by cobalt. The stimulation of HO-1 expression, and alleviation of PCD might be caused by the initial H₂O₂ production induced by cobalt. qRT-PCR and enzymatic assays revealed that cobalt-induced gene expression and the corresponding activities of superoxide dismutase (SOD), catalase (CAT) and ascorbate peroxidase (APX), three enzymes that metabolize reactive oxygen species, were consistent with the H₂O₂ accumulation during GA treatment. These cobalt responses were differentially blocked by co-treatment with ZnPPIX. We therefore suggest that HO-1 functions in the cobalt-triggered alleviation of PCD in wheat aleurone layers, which is also dependent on the enhancement of the activities of antioxidant enzymes.     

Enzymatic degumming

The first enzymatic degumming process to be used industrially was the EnzyMax® process that was launched in 1992; it used porcine phospholipase A2 (PLA2). Subsequently, various microbial phospholipases (PLases) with different specificities have been developed. They have the advantages of being kosher/halal and of having a non‐limited availability and lower cost. The first of these microbial enzymes were the phospholipases A1 (Lecitase® Novo and Ultra) and more recently, a phospholipase C (Purifine®) and a lipid acyl transferase (LysoMax®) with PLA2 acitivity have also become available in commercial quantities. These enzymes have different specificities. The Lecitases® and the LysoMax® enzymes catalyse the hydrolysis of all common phosphatides and differ in this respect from the Purifine® enzyme, which is specific for phosphatidyl choline and phosphatidyl ethanolamine. These phosphatides are hydrolysed to oil‐soluble diacylglycerol and water‐soluble phosphate esters. Since these diacylglycerols remain in the oil during refining, they contribute to the oil yield. That also holds for the sterol and stanol fatty esters formed as a consequence of the phosphatide hydrolysis catalysed by the LysoMax® enzyme. In addition, all enzymes cause less oil to be retained by the gums by decreasing the amount of gums and/or their oil retention, which also contributes to an improved oil yield. On the other hand and contrary to common belief, the enzymes are incapable of catalysing the hydrolysis of non‐hydratable phosphatides (alkaline earth salts of phosphatidic acid) under industrial conditions. Consequently, the industrial enzymatic degumming step has to be preceded by a chemical degumming step to arrive at a degummed oil with a sufficiently low residual phosphorus content that can be physically refined. Accordingly, it might well be preferable to limit the oil treatment to said chemical degumming and produce oil with a low residual phosphorus content and gums, and then treat the gums separately to recover their fatty matter, whereby this recovery can be enzymatic or chemical.     

Synthesis and characterization of bionanocomposites of poly(lactic acid) and TiO2 nanowires by in situ polymerization

Bionanocomposites from biopolymers and inorganic nanoparticles are of great interest for packaging materials due to their enhanced physical, thermal, mechanical, and processing characteristics. In this study, poly(lactic acid) (PLA) nanocomposites with covalent bonding between TiO₂ nanowire surface and PLA chains were synthesized through in situ melt polycondensation. Molecular weight, structure, morphology, and thermal properties were characterized. Fourier transform infrared spectroscopy confirmed that PLA chains were covalently grafted onto TiO₂ nanowire surface. Transmission electron microscopy images also revealed clearly a third phase presence on the nanowires after the grafting process. Those grafted PLA chains exhibited significantly increased glass transition temperature and thermal stability, compared with pure PLA. The weight-average molecular weight of PLA/2% TiO₂ nanowire bulk nanocomposites increased by 66% compared with that of pure PLA. The electron microscopy results showed that strong interfacial interaction and homogeneous distribution were achieved between inorganic nanowires and organic PLA matrix in the bulk nanocomposites. The PLA matrix in bulk nanocomposites exhibited elevated glass transition temperature and decreased crystallization ability as the TiO₂ nanowire concentrations were increased from 0 to 2%.     

Structure development of poly(L‐lactic acid) fibers processed at various spinning conditions

Poly(L ‐lactic acid) (PLA) filaments were spun by melt‐spinning at 500 and 1850 mm^?1, and further drawn and heat‐set to modify the morphology of these PLA filaments. PLA yarns were characterized by wide‐angle X‐ray diffraction (WAXD) and sonic method. WAXD reveals that PLA yarns spun at 500 mm^?1 are almost amorphous while the PLA filaments spun at 1850 mm^?1 have about 6% crystallinity. This is different from PET filaments spun at the same speed that have almost no crystallinity. Both drawn‐ and heat‐set PLA filaments showed much higher crystallinity (60%) than do as‐spun fibers produced at 500 and 1850 mm^?1 speed, which is also higher than the usual heat‐set PET yarns. It appears that crystalline orientation rapidly reaches a value in the order of 0.95 at 1850 mm^?1 and that drawn‐ and heat‐set yarns have almost the same crystalline orientation values. Molecular orientation is relatively low for as‐spun PLA yarn, and molecular orientation increased to ～0.5 after drawing or heat–setting or both. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1210–1216, 2006     

Influence of polydispersity of poly(lactic acid) on particle formation by rapid expansion of supercritical CO2 solutions

Poly(lactic acid) (PLA) particles were generated by rapid expansion of supercritical PLA/CO₂ solutions (RESS). Two different PLA samples, one with high (PDI = 2.4) and the other one with low (PDI = 1.4) polydispersity but similar number average molecular weight, were compared. After micronization, the polymers were analysed by rapid-scan infrared spectroscopy, scanning electron microscopy, size-exclusion chromatography, differential scanning calorimetry, and NMR spectroscopy. Our investigation reveals that the polydispersity of the polymers strongly affects the size but not the shape of the particles. We found larger particles (∼730 nm) for the PLA with high polydispersity than for the PLA with low polydispersity (∼270 nm). In both cases, spherical particles were formed. Moreover, our results clearly show that PLA with high polydispersity is less suitable for RESS processing because the low-molecular weight chains are depleted over time and process conditions are thus not constant.     

Mechanisms of Hyperhomocysteinemia Induced Skeletal Muscle Myopathy after Ischemia in the CBS?/+ Mouse Model

Although hyperhomocysteinemia (HHcy) elicits lower than normal body weights and skeletal muscle weakness, the mechanisms remain unclear. Despite the fact that HHcy-mediated enhancement in ROS and consequent damage to regulators of different cellular processes is relatively well established in other organs, the nature of such events is unknown in skeletal muscles. Previously, we reported that HHcy attenuation of PGC-1α and HIF-1α levels enhanced the likelihood of muscle atrophy and declined function after ischemia. In the current study, we examined muscle levels of homocysteine (Hcy) metabolizing enzymes, anti-oxidant capacity and focused on protein modifications that might compromise PGC-1α function during ischemic angiogenesis. Although skeletal muscles express the key enzyme (MTHFR) that participates in re-methylation of Hcy into methionine, lack of trans-sulfuration enzymes (CBS and CSE) make skeletal muscles more susceptible to the HHcy-induced myopathy. Our study indicates that elevated Hcy levels in the CBS^−/+ mouse skeletal muscles caused diminished anti-oxidant capacity and contributed to enhanced total protein as well as PGC-1α specific nitrotyrosylation after ischemia. Furthermore, in the presence of NO donor SNP, either homocysteine (Hcy) or its cyclized version, Hcy thiolactone, not only increased PGC-1α specific protein nitrotyrosylation but also reduced its association with PPARγ in C2C12 cells. Altogether these results suggest that HHcy exerts its myopathic effects via reduction of the PGC-1/PPARγ axis after ischemia.     

Biochemical Effects of Carbohydrate Supplementation in a Simulated Competition of Short Terrestrial Duathlon

The purpose of the present study was to investigate the biochemical effects of carbohydrate supplementation in a simulated competition of short terrestrial duathlon. Ten duathletes participated in a simulated competition of short terrestrial duathlon 30 minutes after the ingestion of a 6% (30 g/500 ml) maltodextrin solution (MALT) or a placebo (PLA). This solution was also ingested every 15 minutes during the competition (12 g/200 ml); and immediately after the competition (18 g/300 ml). Samples of blood were collected at 3 time points: 1) at rest 1 hour before the beginning of the competition; 2) during the competition (approximately 1 hour and 45 minutes after the 1st collection); 3) immediately after the competition. Blood was analyzed for blood glucose, lactate, insulin and cortisol. Significant differences were observed in relation to blood glucose levels between MALT and PLA in the post-competition phase. There was also a significant difference in the lactate levels observed between MALT and PLA during the competition phase. Similarly, a significant difference in the cortisol concentrations during and after the competition phases (MALT and PLA) were observed. We conclude that maltodextrin supplementation appears to be beneficial during short terrestrial duathlon competition as evidenced by biochemical markers.     

Flash co-pyrolysis of biomass with polylactic acid. Part 1: Influence on bio-oil yield and heating value

High amounts of water present in bio-oil are one of the major drawbacks for its utilisation as a fuel. One technology that shows the potential to satisfy the demand for bio-oil with a reduced water content is the flash co-pyrolysis of biomass with polylactic acid, PLA. The influence of PLA on the pyrolysis of willow is investigated with a semi-continuous home-built pyrolysis reactor. Flash co-pyrolysis of willow/PLA blends (10:1, 3:1, 1:1 and 1:2) show synergetic interaction. A higher bio-oil yield and a lower water content as a function of the willow/PLA ratios are obtained. Among the tested blends, the 1:2 willow/PLA blend shows the most pronounced synergy: a reduction in the production of pyrolytic water of almost 28%, accompanied by an increase of more than 37% in the production of water-free bio-oil. Additionally, PLA shows to have a positive influence on the energetic value of the bio-oil produced and on the resulting energy recuperation.     

扩链剂TMP-6000对聚乳酸/聚（3-羟基丁酸-co-3 -羟基戊酸酯）共混物性能的影响

以扩链剂TMP-6000为增容剂,采用熔融共混制备了聚乳酸（PLA）和聚（3羟基丁酸co3羟基戊酸酯）（PHBV）复合材料,研究了TMP-6000对PLA/PHBV复合材料的结晶行为、微观结构、力学性能的影响。结果表明,无定形PLA的加入抑制了PHBV的结晶,TMP-6000的加入使得PLA/PHBV复合材料的结晶能力变弱,提高了PLA的冷结晶温度,且当TMP-6000含量为0.5 %（质量分数,下同）时,PLA的冷结晶峰开始消失,且适量的TMP-6000使得PHBV的玻璃化转变温度（Tg）升高;TMP-6000的加入使得PHBV均匀分散于PLA基体中,且当TMP-6000含量为0.7 %时,PLA与PHBV的相容性最好;TMP-6000的加入显著提高了PLA/PHBV复合材料的分子量;TMP-6000提高了PLA与PHBV之间的结合力,提高了复合材料的拉伸强度,但断裂伸长率有稍微地降低。     

3D printing of copper particles and poly(methyl methacrylate) beads containing poly(lactic acid) composites for enhancing thermomechanical properties

Poly(lactic acid) (PLA) composite filaments with different copper (Cu) contents as high as 40 and 20 wt% of poly(methyl methacrylate) (PMMA) beads have been fabricated by twin-screw extruder for 3D printing. A fused-deposition modeling (FDM) 3D printing technology has been used to print the PLA composites containing hybrid fillers of Cu particles and PMMA beads. The morphology, mechanical, and thermal properties of the printed PLA composites were investigated. The tensile strength was slightly decreased, but storage modulus and thermal conductivity of PLA composites were significantly improved by adding Cu particles in the presence of PMMA beads. The PLA composites with hybrid fillers of 40 wt% of Cu particles and 20 wt% of PMMA beads resulted in thermal conductivity of 0.49 W m⁻¹ K⁻¹ which was three times higher than that of the bare PLA resin. The facilitation of the segregated network of high-thermally conductive Cu particles with the PMMA beads in PLA matrix provided thermally conductive pathways and resulted in a remarkable enhancement in thermal conductivity.     

Degradation of poly(L‐lactide) by a mesophilic bacterium

A Gram negative, rod‐shaped mesophilic bacterium active for poly(L ‐lactide) (PLA) degradation was isolated through the enrichment culture and clear‐zone method. The isolated strain was identified to be Bordetella petrii PLA‐3 on the basis of 16S rDNA gene sequence analysis. B. petrii PLA‐3 was active not only for the degradation of low‐molecular‐weight PLA but also for the degradation of high‐molecular‐weight PLA. The strain seemed to attack the crystalline part of PLA as well as the amorphous region. The PLA film incubated in compost inoculated with the isolated strain lost its weight more notably and exhibited a lower molecular weight than that incubated in the sterilized compost without living microorganisms. Moreover, the profile of the cumulative amount of CO₂ after 20 days of burial in the sterilized compost and subsequent inoculation of the isolated strain into compost was nearly the same as that of CO₂ evolved from PLA buried in compost with the isolated strain at the very beginning when the time was shifted by 20 days. This indicated that not only the abiotic hydrolysis but also the microbial enzymes of the strain contributed to the initial chain cleavage of PLA molecules and resolved the doubt that PLA molecules should be initially cleaved into very low‐molecular‐weight substances by abiotic hydrolysis to be subsequently absorbed into and biodegraded by microorganisms. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

New biofuel integrating glycerol into its composition through the use of covalent immobilized pig pancreatic lipase

By using 1,3-specific Pig Pancreatic lipase (EC 3.1.1.3 or PPL), covalently immobilized on AlPO(4)/Sepiolite support as biocatalyst, a new second-generation biodiesel was obtained in the transesterification reaction of sunflower oil with ethanol and other alcohols of low molecular weight. The resulting biofuel is composed of fatty acid ethyl esters and monoglycerides (FAEE/MG) blended in a molar relation 2/1. This novel product, which integrates glycerol as monoacylglycerols (MG) into the biofuel composition, has similar physicochemical properties compared to those of conventional biodiesel and also avoids the removal step of this by-product. The biocatalyst was found to be strongly fixed to the inorganic support (75%). Nevertheless, the efficiency of the immobilized enzyme was reduced to half (49.1%) compared to that of the free PPL. The immobilized enzyme showed a remarkable stability as well as a great reusability (more than 40 successive reuses) without a significant loss of its initial catalytic activity. Immobilized and free enzymes exhibited different reaction mechanisms, according to the different results in the Arrhenius parameters (Ln A and Ea). However, the use of supported PPL was found to be very suitable for the repetitive production of biofuel due to its facile recyclability from the reaction mixture.     

Mechanical,thermal, and morphology properties of poly(lactic acid) plasticized with poly(ethylene glycol) and epoxidized palm oil hybrid plasticizer

Poly(lactic acid) (PLA) has received great attention recently due to its good physical and mechanical properties such as high tensile strength and modulus, good processability and biodegradability. In this study, low molecular weight poly(ethylene glycol) (PEG) and epoxidized palm oil (EPO) were used as hybrid plasticizers to improve toughness and ductility of PLA. Using the solubility parameter, a tentative evaluation of the hybrid plasticizer that could act as the most effective plasticizer for PLA has been performed and the obtained results have been corroborated with the materials physical properties. Excellent plasticizing effect was obtained by hybrid plasticizer PEG:EPO with ratio 2:1. Addition of PEG:EPO (2:1) hybrid plasticizer to PLA shows a significant improvement of 12,402%, compared to neat PLA. The improvement in flexibility and decrease in rigidity for the plasticized PLA is well evidenced by lower glass transition temperature (T_g) and tensile modulus values. In relation to the thermal stability, a decrease in thermal properties of the hybrid plasticized PLA was observed due to the volatility of the plasticizers. Scanning electron microscopy (SEM) shows that the hybrid plasticizer was turned PLA's smooth surface to fibrous structure and rough fracture surface. POLYM. ENG. SCI., 56:1169–1174, 2016. © 2016 Society of Plastics Engineers     

Simplified preparation of low polydispersity,low molecular weight poly(D,L‐lactic acid) by liquid/liquid phase separation for drug delivery systems with discussion of molecular weight characterization

Poly(D ,L ‐lactic acid) (PLA) has been widely used in pharmaceutics and medicine. Low molecular weight (LMW) PLA is especially useful for rapidly degrading biomaterials such as those used for short‐duration drug delivery systems. There is scant information available in the literature regarding the purification and analysis of LMW PLA. In this paper we report (1) a convenient and effective polymer purification/fractionation technique to produce LMW PLA with narrow molecular weight distribution (MWD) and (2) analyses that were used to characterize the molecular weight and MWD of these polymers. A novel, convenient and effective temperature‐induced solution‐phase separation method was developed to produce narrow MWD, LMW (600–2000 g mol^?1) PLA. Molecular weights determined using gel permeation chromatography (GPC) with universal calibration, unlike those determined with the commonly used conventional calibration, showed good agreement with those obtained using several independent direct techniques. The phase separation induced by temperature reduction of a polymer in a single solvent system provided a simple and effective technique to produce narrow MWD, LMW PLA polymers. Additional advantages of this technique are: (1) only one solvent is required; (2) the risk of local complete solid polymer precipitation is eliminated; (3) it is reversible and not dependent on the rate of cooling; and (4) use of chlorinated solvents is avoided. This technology may open up a new opportunity for manufacturing LMW polymers with narrow MWD. We also found that GPC with universal calibration is a more accurate method than GPC with the commonly used conventional calibration for characterizing these polymers, and is straightforward to use especially now that on‐line viscosity detectors are widely available. Copyright © 2010 Society of Chemical Industry