Facile surface modification of PVDF microfiltration membrane by strong physical adsorption of amphiphilic copolymers

To endow the surface of poly(vinylidene fluoride) (PVDF) microfiltration (MF) membranes with hydrophilicity and antifouling property, physical adsorption of amphiphilic random copolymers of poly(ethylene glycol) methacrylate (PEGMA) and poly(methyl methacrylate) (PMMA) (P(PEGMA‐r‐MMA)) onto the PVDF membrane was performed. Scanning electron microscopy (SEM) images showed that the adsorption process had no influence on the membrane structure. Operation parameters including adsorption time, polymer concentration, and composition were explored in detail through X‐ray photoelectron spectroscopy (XPS), static water contact angle (CA), and water flux measurements. The results demonstrated that P(PEGMA‐r‐MMA) copolymers adsorbed successfully onto the membrane surface, and hydrophilicity of the PVDF MF membrane was greatly enhanced. The antifouling performance and adsorption stability were also characterized, respectively. It was notable that PVDF MF membranes modified by facile physical adsorption of P(PEGMA₅₈‐r‐MMA₃₃) even showed higher water flux and better antifouling property than the commercial hydrophilic PVDF MF membranes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3112–3121, 2013     

Controlled grafting of polymer brushes on poly(vinylidene fluoride) films by surface‐initiated atom transfer radical polymerization

Controlled grafting of well‐defined polymer brushes on the poly(vinylidene fluoride) (PVDF) films was carried out by the surface‐initiated atom transfer radical polymerization (ATRP). Surface‐initiators were immobilized on the PVDF films by surface hydroxylation and esterification of the hydroxyl groups covalently linked to the surface with 2‐bromoisobutyrate bromide. Homopolymer brushes of methyl methacrylate (MMA) and poly(ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the α‐bromoester‐functionalized PVDF surface. The chemical composition of the graft‐functionalized PVDF surfaces was characterized by X‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance (ATR)–FTIR spectroscopy. Kinetics study revealed a linear increase in the graft concentration of PMMA and PEGMA with the reaction time, indicating that the chain growth from the surface was consistent with a “controlled” or “living” process. The “living” chain ends were used as the macroinitiator for the synthesis of diblock copolymer brushes. Water contact angles on PVDF films were reduced by surface grafting of PEGMA and MMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3704–3712, 2006     

Amphiphilic poly(vinyl chloride)‐g‐poly[poly(ethylene glycol) methylether methacrylate] copolymer for the surface hydrophilicity modification of poly(vinylidene fluoride) membrane

In this study, a comblike amphiphilic graft copolymer containing poly(vinyl chloride) (PVC) backbones and poly(oxyethylene methacrylate) [poly(ethylene glycol) methylether methacrylate (PEGMA)] side chains was facilely synthesized via an atom transfer radical polymerization method. Secondary chlorines in PVC were used as initial sites to graft a poly[poly(ethylene glycol) methylether methacrylate] [P(PEGMA)] brush. The synthesized PVC‐g‐P(PEGMA) graft copolymer served as an efficient additive for the hydrophilicity modification of the poly(vinylidene fluoride) (PVDF) membrane via a nonsolvent‐induced phase‐inversion technique. A larger pore size, higher porosity, and better connectivity were obtained for the modified PVDF membrane; this facilitated the permeability compared to the corresponding virgin PVDF membrane. In addition, the modified PVDF membrane showed a distinctively enhanced hydrophilicity and antifouling resistance, as suggested by the contact angle measurement and flux of bovine serum albumin solution tests, respectively. Accordingly, the PVC‐g‐P(PEGMA) graft copolymer was demonstrated as a successful additive for the hydrophilicity modification, and this study will likely open up new possibilities for the development of efficient amphiphilic PVC‐based copolymers for the excellent hydrophilicity modification of PVDF membranes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electropolymerization of p‐phenylenediamine on Pt‐electrode from aqueous acidic solution: Kinetics,mechanism, electrochemical studies,and characterization of the polymer obtained

Ar plasma‐induced graft polymerization of poly(ethylene glycol) (PEG) on Ar plasma pretreated poly(methyl methacrylate) (PMMA) surfaces was carried out to improve the antistatic properties. The surface composition and microstructure of the PEG‐grafted PMMA surfaces from plasma induction were characterized by attenuated total reflectance Fourier transfer infrared (ATR‐FTIR) spectroscopy, water contact angles (CA), and atomic force microscopy (AFM) measurements. The measurements revealed that the antistatic properties can be remarkably improved with the surface resistivity of PEG‐grafted PMMA surface decreasing significantly by 3–6 orders of magnitude, with the optimum condition for polymerization grafted onto the Ar plasma pretreated PMMA surface being 40 W for RF power and 3 min for glow discharge time. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Surface modification of polythiophene and poly(3‐methyl thiophene) films by graft copolymerization

Polythiophene (PTH) and poly(3‐methyl thiophene) (PMT) films were electrochemically polymerized in an electrolyte solution of boron fluoride–ethyl ether. Ozone‐pretreated PTH and PMT films were subjected to UV‐light‐induced graft copolymerization with different monomers, including poly(ethylene glycol) monomethacrylate, acrylic acid, and glycidyl methacrylate. Surface grafting with the hydrophilic polymers gave rise to more hydrophilic PTH and PMT films. The structure and chemical composition of each copolymer surface were studied by X‐ray photoelectron spectroscopy. The surface grafting with the hydrophilic polymers resulted in a more hydrophilic PTH film. The dependence of the density of surface grafting and the conductivities of the grafted PTH and PMT films on the ozone pretreatment was also studied. A large amount of the grafted groups at the surface of the PTH and PMT films remained free for further surface modification and functionalization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Poly(vinylidene fluoride) (PVDF) membrane was pre-irradiated by electron beam, and then poly(ethylene glycol) methyl ether methacrylate (PEGMA) was grafted onto the membrane surface in the aqueous solution. The degree of grafting was significantly influenced by the pH value of the reaction solution. The surface chemical changes were characterized by the Fourier transform infrared attenuated total reflection spectroscopy (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Combining with the analysis of the nuclear magnetic resonance proton and carbon spectra (¹H NMR and ¹³C NMR), PEGMA was mainly grafted onto the membrane surface. Morphological changes were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The porosity and bulk mean pore size changes were determined by a mercury porosimeter. The surface and bulk hydrophilicity were evaluated on the basis of static water contact angle, dynamic water contact angle and the dynamic adsorption process. Furthermore, relative high permeation fluxes of pure water and protein solution were obtained. All these results demonstrate that both hydrophilicity and fouling resistance of the PVDF membrane can be improved by the immobilization of hydrophilic comb-like polymer brushes on the membrane surface.     

Preparation and characterization of antifouling poly(vinylidene fluoride) blended membranes

Poly(vinylidene fluoride) (PVDF) membranes have been widely used in microfiltration and ultrafiltration because of their excellent chemical resistance and thermal properties. However, PVDF membranes have exhibited severe membrane fouling because of their hydrophobic properties. In this study, we investigated the antifouling properties of PVDF blended membranes. Antifouling PVDF blended membranes were prepared with a PVDF‐g‐poly(ethylene glycol) methyl ether methacrylate (POEM) graft copolymer. The PVDF‐g‐POEM graft copolymer was synthesized by the atom transfer radical polymerization (ATRP) method. The chemical structure and properties of the synthesized PVDF‐g‐POEM graft copolymer were determined by NMR, Fourier transform infrared spectroscopy, and gel permeation chromatography. To investigate the antifouling properties of the membranes, we prepared microfiltration membranes by using the phase‐inversion method, which uses various PVDF/PVDF‐g‐POEM concentrations in dope solutions. The pure water permeabilities were obtained at various pressures. The PVDF/PVDF‐g‐POEM blended membranes exhibited no irreversible fouling in the dead‐end filtration of foulants, including bovine serum albumin, sodium alginate, and Escherichia coli broth. However, the hydrophobic PVDF membrane exhibited severe fouling in comparison with the PVDF/PVDF‐g‐POEM blended membranes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermosensitive PMMA core/oligo(ethylene glycol)-based shell microgels as drug carriers in detoxification treatment

The core-shell structured polymer microgels were synthesized by coating the hydrophobic poly(methyl methacrylate) (PMMA) sphere cores with hydrophilic nonlinear poly(ethylene glycol)-based gel shell layer. The uniqueness of these core-shell microgels lies in the integration of the PMMA core microsphere with strong hydrophobicity and the novel oligo(ethylene glycol)-based gel layer with well-defined thermosensitivity for improving loading/release efficacy of two detoxification drugs (chlorpromazine and diltiazem). The hydrophilic shell is composed of hydrophilic copolymer of 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) with oligo(ethylene glycol) methyl ether methacrylates (MEO₅MA). It was found that the molar ratio of two shell monomers n(MEO₂MA)/n(MEO₅MA) of 1:6 was an ideal matching value for production of the P(MEO₂MA)/P(MEO₂MA-co-MEO₅MA) core-shell microgels with tunable volume phase transition temperature and excellent colloidal stability across the physiologically important temperature range. Moreover, chlorpromazine- and diltiazem-loaded microgels can show an obvious thermosensitive release and in vitro sustained-release characteristic up to 80 h.     

Robust grafting of PEG-methacrylate brushes from polymeric coatings

A study is presented of the grafting of poly(ethylene glycol)methyl ether methacrylate (PEGMA) from polymeric macroinitiator films to form well-defined polymer brushes, using activators generated/regenerated by electron transfer (AGET/ARGET) atom transfer radical polymerization (ATRP). Polymer brush coatings can potentially be obtained on surfaces of virtually any shape and composition, because of the ease of conformal casting of the anchoring macroinitiator film. Polymer brush coatings are synthesized in a robust way, as ARGET and AGET ATRP require little to no deoxygenation and make use of stable catalysts. The monomer, catalyst, ligand and reducing agent concentrations, the amount and type of initiating moiety in the anchoring films, and the choice of solvents are optimized, resulting in control over the rate of reaction, and the molecular weight of poly(PEGMA). The best conditions are determined for the formation of a poly(PEGMA) brush with high grafting density, controlled thickness and “living” ends available for post-functionalization.     

Rheological studies of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation

Disulfonated poly(arylene ether sulfone) (BPS) random copolymers, prepared from a sulfonated monomer, have been considered for use as membrane materials for various applications in water purification and power generation. These membranes can be melt-processed to avoid the use of hazardous solvent-based processes with the aid of a plasticizer, a low molecular weight poly(ethylene glycol) (PEG). PEG was used to modify the glass transition temperature and melt rheology of BPS to enable coextrusion with polypropylene (PP). Our previous paper discussed the miscibility of BPS with PEG and the influence of PEG on the glass transition of BPS. In this study, the rheological properties of disulfonated poly(arylene ether sulfone)s plasticized with poly(ethylene glycol) (PEG) are investigated to identify coextrusion processing conditions with candidate PPs. The effects of various factors including PEG molecular weight, PEG concentration, temperature and BPS molecular weight on blend viscosity were studied. The rheological data effectively lie on the same master curve developed by Bueche and Harding for non-associating polymers such as poly(methyl methacrylate) (PMMA) and polystyrene (PS). Although sulfonated polysulfone contains ionic groups, the form of its viscosity versus shear rate (or frequency) behavior appears to be dominated by the relaxation of polymer entanglements.     

Characterization of Surface Modification of Polyethersulfone Membrane

Surface modification of polyethersulfone (PES) membrane surfaces using UV/ozone pretreatment with subsequent grafting and interfacial polymerization on membrane surface was investigated in order to improve the resistance of membrane surface to protein adsorption. The surface modifications were evaluated in terms of hydrophilicity, chemical composition of the surface and static protein adsorption. In both methods, poly(vinyl alcohol) (PVA), poly(ethylene glycol) (PEG) and chitosan were chosen as hydrophilic polymers to chemically modify the commercial virgin PES membrane to render it more hydrophilic as these materials have excellent hydrophilic property. Modified PES membranes were characterized by contact angle and XPS. Contact angles of modified PES membranes were reduced by 19 to 58% of that of the virgin PES membrane. PES membrane modified with PEG shows higher wettability than other hydrophilic materials with the highest contact angle reduction shown for UV/ozone pretreated, PEG grafted PES membrane surface. In general, XPS spectra supported that the PES membranes were successfully modified by both grafting with UV/ozone pretreatment and interfacial polymerization methods. The results of the static protein adsorption experiments showed all surface modifications led to reduction in protein adsorption on PES membranes; the highest protein adsorption reduction occurred with membrane modified by UV/ozone pretreatment followed by PES grafting, which corresponded to the highest contact angle reduction. However, there seems to be no clear correlation between contact angle reduction and reduction in protein adsorption in the case that involved chitosan. Nevertheless, membranes modified with chitosan do show higher reduction in protein adsorption than membranes modified with other materials under the same conditions.     

Hydrophilic Modification of PVDF Microfiltration Membrane with Poly (Ethylene Glycol) Dimethacrylate through Surface Polymerization

The hydrophilic modification of poly (vinylidene fluoride) (PVDF) membrane with poly (ethylene glycol) dimethacrylate (PEGDMA) through grafting reaction for antifouling was reported. The influence of PEGDMA content, reaction temperature and time, on the structure, morphology, antifouling, and hydrophilicity of PVDF-g-PEGDMA membrane has been investigated. The PEGDMA monomers that were grafted on the surface of PVDF microfiltration membrane were confirmed by Attenuation total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS), and morphology study conducted by SEM revealed the changes before and after modification. The protein adsorption, filtration performance, water content, and dynamic contact angle were used to characterize the antifouling and hydrophilicity of the modified PVDF membranes. Compared with the pristine PVDF membrane, the bovine serum albumin (BSA) adsorption on the PVDF-g-PEGDMA membrane decreased about 80%, and the water contact angle of the membrane dropped to 0°. Besides, the experimental results revealed no significant differences between the membrane samples with respect to pore size.     

Interpenetrating polymer networks from castor oil and dibasic acids

Prepolyesters were obtained from castor oil and dibasic acids, viz oxalic, malonic, succinic, glutaric, adipic, suberic and sebacic acid. These prepolyesters (PPE) were subsequently interpenetrated with methyl methacrylate containing 1% ethylene glycol dimethacrylate as crosslinker by radical polymerization initiated with benzoyl peroxide. The novel PPE poly(methyl methacrylate) PPE/PMMA interpenetrating polymer networks (IPNs) were obtained as powder. They were characterized by solubility behaviour, IR spectral study and thermal behaviour.     

Effect of ethanol in the coagulation bath on the structure and performance of PVDF-g-PEGMA/PVDF membrane

This report investigated the effect of ethanol content in the coagulation bath on the surface composition, membrane pore size structure, pure water flux, and permeability of the amphiphilic polymer polyvinylidene fluoride (PVDF)-g-poly (ethylene glycol) methyl ether methacrylate (PEGMA)-modified PVDF membrane. The study found that pore size and their distribution and, as a result, membrane permeability, can also be easily controlled by adjusting ethanol content in the coagulation bath. Membrane water fluxes formed by the coagulation baths with 0, 10, 20, and 30% of ethanol were 1843.65, 2774.61, 4391.88, and 5142.35 L (m⁻²·h⁻¹). When the content of ethanol in the coagulation bath is high, the surface enrichment of PEGMA slightly decreases, and the surface becomes rougher. Thus, the decrease of the hydrophilic functional groups on the surface of the membrane and the increase of the roughness leads to the deterioration of the hydrophilicity of the membranes surface. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47380.     

Synthesis of well‐defined amphiphilic block copolymers via AGET ATRP used for hydrophilic modification of PVDF membrane

A well‐defined amphiphilic block copolymer consisting of a hydrophobic block poly(methyl methacrylate) (PMMA) and a hydrophilic block poly[N,N–2‐(dimethylamino) ethyl methacrylate] (PDMAEMA) was synthesized by activator generated by the electron transfer for atom transfer radical polymerization method (AGET ATRP). Kinetics study revealed a linear increase in the graph concentration of PMMA‐b‐PDMAEMA with the reaction time, indicating that the polymer chain growth was consistent with a controlled process. The gel permeation chromatography results indicated that the block copolymer had a narrow molecular weight distribution (Mw/Mn = 1.42) under the optimal reaction conditions. Then, poly(vinylidene fluoride) (PVDF)/PMMA‐b‐PDMAEMA blend membranes were prepared via the standard immersion precipitation phase inversion process, using the block copolymer as additive to improve the hydrophilicity of the PVDF membrane. The presence and dispersion of PMMA‐b‐PDMAEMA clearly affected the morphology and improved the hydrophilicity of the as‐synthesized blend membranes as compared to the pristine PVDF membranes. By incorporating 15 wt % of the block copolymer, the water contact angle of the resulting blend membranes decreased from pure PVDF membrane 98° to 76°. The blend membranes showed good stability in the 20 d pure‐water experiment. The bovine serum albumin (BSA) absorption experiment revealed a substantial antifouling property of the blend membranes in comparison with the pristine PVDF membrane. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42080.     

Lichtinduzierte Polymerisation, 4. Pfropfcopolymerisation von Methylmethacrylat auf Polyethylenoxid in Gegenwart von Chinolinderivaten

When using poly(ethylene oxide) (PEO) as a polymeric hydrogen donator, grafted polymerization products are obtained upon photoinduced polymerization of methyl methacrylate with quinoline derivatives and PEO. The separation of these graft copolymers from the simultaneously formed homopolymeric poly(methyl methacrylate) (PMMA) and the remainder of not converted PEO can be achieved by subsequent extraction with ethyl acetate and methanol. With that determination of graft yield, degree of grafting, grafting success, and grafting height are possible.     

PMMA/PEG共混物形态和热性质的研究

在聚乙二醇存在的情况下,自由基聚合得到的聚甲基丙烯酸甲酯/聚乙二醇(PMMA/PEG)共混物,是一种半结晶聚合物;有相分离发生,一部分PEG晶体依然保持其晶体的特征,另一部分PEG晶体转变成非晶态,与PMMA网络复合,形成完全均一的非晶相。     

Redox- and pH-responsive hydrogels: formulation and controlled drug delivery

A novel drug-delivery carrier, poly(ethylene glycol) methyl ether methacrylate/2-(diethylamino) ethyl methacrylate/bis (2-methacryloxyethyl) disulfide (PEDS) hydrogel, was prepared with poly(ethylene glycol) methyl ether methacrylate (PEGMA) and amine containing 2-(diethylamino)ethyl methacrylate (DMAEMA) monomers and a disulfide-containing cross-linking agent bis(2-methacryloxyethyl) disulfide (DSDMA). The RN(C₂H₅)₂ in poly(2-(diethylamino)ethyl methacrylate) (PDMAEMA) can be protonated in acidic environments, causing the expansion of the polymer network and promotion of drug release. The presence of the biologically available reducing agent glutathione (GSH) induces disulfide bond cleavage in DSDMA, which initiates the expansion of the polymer networks. The inner morphology dependence on redox and pH conditions for PEDS₁ hydrogels was revealed. In neutral solutions without GSH, a pore structure with full, thick walls was observed. In acidic or GSH solutions, the pore structure was destroyed, and the pore cell walls were thin or broken. These changes can induce drug release. Drug release studies were also conducted using berberine as a model drug. The drug released from the hydrogels into the supernatant was measured in both GSH and acidic solutions. PEDS₁ hydrogels exhibited a substantial enhancement in release rates in acidic solutions or neutral GSH solutions, suggesting the drug release from PEDS hydrogels is redox- and pH-dependent.     

Thermo‐Responsive Gating Characteristics of Poly(N‐isopropylacrylamide)‐Grafted Membranes

Both hydrophilic Nylon‐6 membranes and hydrophobic poly(vinylidene fluoride) (PVDF) membranes, with a wide range of grafting yields of poly(N‐isopropylacrylamide) (PNIPAM), were prepared using the plasma‐graft pore‐filling polymerization method. The effect of the physical and chemical properties of the substrates on the thermo‐responsive gating characteristics of the PNIPAM‐grafted membranes was investigated experimentally. For both the PVDF and Nylon‐6 membranes, the grafted PNIPAM polymers were found not only on the membranes outer surface, but also on the inner surfaces of the pores throughout the entire thickness of the membrane. The thermo‐responsive gating characteristics of the PNIPAM‐grafted membranes were heavily affected by the physical and chemical properties of the porous membrane substrates. The PNIPAM‐g‐Nylon‐6 membranes exhibited a much larger thermo‐responsive gating coefficient than the PNIPAM‐g‐PVDF membranes. Furthermore, to achieve the largest thermo‐responsive gating coefficient, the corresponding optimum grafting yield of PNIPAM for the PNIPAM‐g‐Nylon‐6 membranes was also larger than that for the PNIPAM‐g‐PVDF membranes.     

Synthesis and characterization of poly(methyl methacrylate) star polymers

Star-branched poly(methyl methacrylate)s (PMMA) were synthesized by linking ‘living’ arms (produced by anionic polymerzation) with ethylene glycol dimethacrylate. Stars having arm molecular weights of 10000 and 40000 and between 4.9 and 18.7 branches were produced. The polymers were characterized using light scattering, size exclusion chromatography, and viscometry. It was found that well-defined PMMA stars were obtained only at the higher (40000) arm molecular weight. The stars prepared using the lower molecular weight (c. 10000) arms contained very high molecular weight gel components.