Orthogonally substituted aryl derivatives as bipolar hosts for blue phosphorescent organic light-emitting diodes

Four novel bipolar hosts, namely 9,9′-(2-(4,6-diphenylpyrimidin-2-yl)-1,3-phenylene)bis(9H-carbazole) (2CzPm), 9,9′-(2-(4,6-diphenylpyrimidin-2-yl)-1,3-phenylene)bis(3,6-di-tert-butyl-9H-carbazole) (2TCzPm), 5,5′-(2-(4,6-diphenylpyrimidin-2-yl)-1,3-phenylene)bis(5H-benzofuro[3,2-c]carbazole) (2BFCzPm) and 5,5′-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)-1,3-phenylene)bis(5H-benzofuro[3,2-c]carbazole) (2BFCzTrz) were designed and synthesized with diphenylpyrimidine and diphenyltriazine as electron-transporting units and carbazole derivatives as hole-transporting motifs for the application in blue phosphorescent organic light-emitting diodes (PHOLEDs). These electron-accepting and -donating functional groups were attached to the central phenylene bridge in an ortho-substituted fashion, which led to high triplet energies (2.97–3.00 eV) and wide bandgap (3.43–3.55 eV). The effect of modulation of electron-accepting and donating groups on the photophysical properties, frontier orbital energy levels, charge carrier transport properties and device performance of these four hosts has been investigated. 2BFCzPm and 2BFCzTrz featured with large conjugation system exhibited high thermal stability as compared to 2CzPm and 2TCzPm. The bis[2-(4,6-difluorophenyl)-pyridinato-C2,N](picolinato)iridium(III) (FIrpic) based blue PHOLEDs hosted by 2BFCzPm exhibited excellent electroluminescence performance with a peak current efficiency of 38.2 cd/A and a maximum external quantum efficiency of 19.0%, which could be ascribed to the enhanced thermal stability, high triplet energy and good bipolar charge transport properties of the host material.     

Exciton and Polaron Quenching in Doping‐Free Phosphorescent Organic Light‐Emitting Diodes from a Pt(II)‐Based Fast Phosphor

By introducing a neat Pt(II)‐based phosphor with a remarkably short decay lifetime, a simplified doping‐free phosphorescent organic light‐emitting diode (OLED) with a forward viewing external quantum efficiency (EQE) and power efficiency of 20.3 ± 0.5% and 63.0 ± 0.4 lm W^?1, respectively, is demonstrated. A quantitative analysis of how triplet‐triplet annihilation (TTA) and triplet‐polaron annihilation (TPA) affect the device EQE roll‐off at high current densities is performed. The contributions from loss of charge balance associated with charge leakage and field‐induced exciton dissociation are found negligible. The rate constants k_TTA and k_TPA are determined by time‐resolved photoluminescence experiments of a thin film and an electrically‐driven unipolar device, respectively. Using the parameters extracted experimentally, the EQE is modeled versus electric current characteristics of the OLEDs by taking both TTA and TPA into account. Based on this model, the impacts of the emitter lifetime, quenching rate constants, and exciton formation zone upon device efficiency are analyzed. It is found that the short lifetime of the neat emitter is key for the reduction of triplet quenching.     

Tuning electron injection/transporting properties of 9,10-diphenylanthracene based electron transporters via optimizing the number of peripheral pyridine for highly efficient fluorescent OLEDs

By incorporating different number of pyridine rings to the periphery of the 9,10-diphenylanthracene (DPA) core, four new pyridine-containing DPA derivatives, 3-(4-(10-phenylanthracen-9-yl)phenyl)pyridine (AnPy), 9,10-bis(4-(pyridin-3-yl)phenyl)anthracene (AnDPy), 3,3'-((2-(pyridin-3-yl)anthracene-9,10-diyl)bis(4,1-phenylene))dipyridine (AnTPy), 3,3'-(9,10-bis(4-(pyridin-3-yl)phenyl)anthracene-2,6-diyl)dipyridine (AnFPy) were designed and synthesized as electron transporters. Their photophysical properties, energy levels and electron mobilities can be readily regulated through tuning the quantity of the pyridine ring. Through optimizing electron injection/transporting properties, AnTPy exhibits not only a suitable lowest unoccupied molecular orbital (LUMO) energy level for electron injection into light-emitting layer (EML), but also a relatively high electron mobility of around 10⁻³ cm² V⁻¹ s⁻¹, which is about two orders of magnitude higher than that of the widely used material Alq₃. As expected, the blue fluorescent OLEDs with AnPy, AnTPy and AnFPy as an electron-transporting layer (ETL) exhibited superior performance compared to that using Alq₃, remarkably lowering the driving voltages and improving efficiencies. In particular, the device with AnTPy as an ETL showed a maximum current efficiency of 14.4 cd A⁻¹, a maximum power efficiency of 12.1 lm W⁻¹, a maximum external quantum efficiency (EQE) of 8.15% and low efficiency roll-off even at an illumination-relevant luminance of 10,000 cd m⁻². These results clearly demonstrated that tuning electron injection/transporting properties by optimizing the number of peripheral electron-withdrawing groups was an efficient strategy to achieve high-performance ETMs.     

Efficient blue organic light-emitting diodes based on triphenylimidazole substituted anthracene derivatives

A series of new blue emissive materials based on the conjugates of highly fluorescent diaryl anthracene and electron-transporting triphenylimidazole moieties: 2-(4-(anthracen-9-yl)phenyl)-1,4,5-triphenyl-1H-imidazole (ACBI), 2-(4-(10-(naphthalen-1-yl)anthracen-9-yl)phenyl)-1,4,5-triphenyl-1H-imidazole (1-NaCBI), 2-(4-(10-(naphthalen-2-yl)anthracen-9-yl)phenyl)-1,4,5-triphenyl-1H-imidazole (2-NaCBI) were designed and synthesized successfully. These materials exhibit good film-forming properties and excellent thermal stabilities. Meanwhile, the decreased π-conjugation in these compounds compared with phenanthroimidazole derivatives leads to obvious hypsochromic shift. To explore the electroluminescence properties of these materials, typical three-layer organic light-emitting devices were fabricated. With respect to the three layer device 2 using 1-NaCBI as the emitting layer, its maximum current efficiency reaches 3.06 cd A⁻¹ with Commission Internationale del’Eclairage (CIE) coordinates of (0.149, 0.092). More interestingly, sky blue doped device 5 based on 1-NaCBI achieved a maximum current efficiency of 15.53 cd A⁻¹ and a maximum external quantum efficiency of 8.15%, high EQE has been proved to be induced by the up-conversion of a triplet excited state.     

Silicon-based carbazole and oxadiazole hybrid as a bipolar host material for phosphorescent organic light-emitting diodes

A silicon-based bipolar compound, 2-(4-((4-(9H-carbazol-9-yl)phenyl)dimethylsilyl)phenyl)-5-phenyl-1,3,4-oxadiazole (COHS), was designed and prepared as a host material for phosphorescent organic light-emitting diodes (OLEDs). The conjugated analogue of COHS, 2-(4′-(9H-carbazol-9-yl)biphenyl-4-yl)-5-phenyl-1,3,4-oxadiazole (COH), was also prepared to investigate their structure–property relationships. Thermal-, photophysical- and electrochemical properties as well as their single-crystal X-ray structures were studied for COHS and COH. The central silicon atom in COHS successfully disconnected the electronic communication between the carbazole and oxadiazole groups, resulting in relatively high triplet energy of ca. 2.71 eV, which were capable of hosting green phosphorescent emitters. DFT calculations were conducted to investigate the electronic structures of COHS and COH, and the results showed good correlation to experimental results. Finally, COHS and COH were used as a bipolar host material for a green phosphorescence organic light-emitting diode (PHOLED) devices with Ir(ppy)₃ (tris[2-phenylpyridinato-C²,N]iridium(III)) as a dopant. The resulting device with COHS (device I) showed higher performance than the device with COH (device II), exhibiting high efficiencies and low-efficiency roll-off. Device I achieved maximum external quantum efficiencies (EQE) of 15.8%, whereas device II exhibited a relatively lower EQE of 13.0%.     

The effect of the electron-donor ability on the OLED efficiency of twisted donor-acceptor type emitters

Two twisted donor-acceptor (D-A) chemical structures, CCDMB and PCDMB, were developed as a new class of thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes (OLEDs). Two emitters consist of 3-substituted carbazole as a first donor and trivalent boron as an electron acceptor in common, and carbazole and phenoxazine as second donors with different electron donor ability. While PCDMB with a strong phenoxazine donor decreased the lowest singlet excited state (S₁) level and thus showed a small singlet-triplet energy difference (ΔE_ST) value of 0.13 eV, resulting in effective reverse intersystem crossing (RISC), however, CCDMB with a weak donor showed a large ΔE_ST value of 0.21 eV. Efficient triplet harvesting of PCDMB was confirmed by a delayed component in transient PL decay curves of 25 wt% PCDMB-doped bis[2-(diphenylphosphino)phenyl] ether oxide (DPEPO) films. OLED devices with a CCDMB emitter showed deep-blue emission with Commission Internationale de l’Éclairage (CIE) of (0.16, 0.12) but a low maximum EQE of 5.5%, indicative of insufficient triplet harvesting. PCDMB-based devices showed green emission with CIE of (0.21, 0.45) and a high maximum EQE of 22.3%. Our study revealed the effect of the electron donor ability of structurally similar emitters on ΔE_ST values, triplet harvesting, and device efficiency.     

Theoretical studies on cyclometalated platinum(II) complexes based on isoquinolinyl azolate: ππ-stacking interaction and photophysical properties

The photophysical properties of four Pt(II) complexes [Pt(Lx)₂], x = 1–4, (1–4), where Lx are 6-t-butyl-1-(3-trifluoro-methyl-1H-pyrazol-5-yl) isoquinoline (1), 3,5-di-t-butyl-1-(3-trifluoromethyl-1H-pyrazol-5-yl) isoquinoline (2), 6-(2,6-diisopropylphenyl)-1-(3-trifluoro-methyl-1H-pyrazol-5-yl) isoquinoline (3), and 4-(2,6-diisopropylphenyl)-1-(3-trifluoro-methyl-1H-pyrazol-5-yl) isoquinoline (4), are investigated by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Furthermore, the binding interaction in Pt_n stack is studied to discover the influence of different cyclometalated ligand. The calculated results rationalize that the complex 1 exhibits a stack of three molecules rather than the infinite aligned stack. Complexes 1 and 3 present the stronger tendency to form the aligned ππ-stacking interaction as compared with complexes 2 and 4. The dimers of other four complexes, 3a (Pt(L3)(Ma), Ma = 5-(2-pyridyl)-3-trifluoromethylpyrazole), 3b (Pt(L3)(Mb), Mb = 5-(4-phenyl-2-pyridyl)-3-trifluoromethylpyrazole), 3c (Pt(L3)(Mc), Mc = 5-(4-tert-butyl-2-pyridyl)-3-trifluoromethylpyrazole), and 5 (Pt(fppz)₂ fppz = 5-(2-pyridyl)-3-trifluoromethylpyrazole), are also studied to investigate the effect of different aromatic ligand or substituents on the ππ-stacking interaction. The emissions of complexes 1–4 originate from various charge transfer states including the intraligand charge transfer (ILCT) and ligand-to-ligand charge transfer (LLCT) together with the metal-to-ligand charge transfer (MLCT). Finally, the items related with the radiative and nonradiative rate constants are examined. Besides the potential energy profile between the lowest triplet state (³MLCT) and metal centered state (³MC), the deactivation process of the ³MC state via the minimum energy crossing point (MECP) between the ³MC and the ground state (¹S₀) potential surfaces is also explored.     

Optimizing the conjugation between N,N′-dicarbazolyl-3,5-benzene and triphenylphosphine oxide as bipolar hybrids for highly efficient blue and single emissive layer white phosphorescent OLEDs

Two bipolar host materials, mCPpPO and mCPmPO have been synthesized by Ni(II)/Zn-catalyzed cross-coupling of diphenylphosphine oxide and corresponding aryl bromide. The photophysical properties, HOMO/LUMO orbital distribution and triplet levels of these host materials are investigated and optimized by tuning the linking modes between electron acceptor triphenylphosphine oxide and electron donor N,N′-dicarbazolyl-3,5-benzene (mCP). When mCP is linked to the meta-position of benzene of triphenylphosphine oxide, the hybrid (mCPmPO) shows much higher steric hinderance than the para-position linked analogue (mCPpPO) so that it possesses a higher triplet energy. Equipped with the bipolar transport properties, mCPmPO-based blue PhOLED doped FIrpic shows a maximum current efficiency (η_c,max) of 40.0 cd/A, a maximum power efficiency (η_p,max) of 39.7 lm/W, corresponding the maximum external quantum efficiency (η_EQE,max) of 20.3%, and the current efficiency still maintain to 34.8 cd/A even at 1000 cd/m². Based on the optimized triplet energy level, the single emission layer white PhOLED hosted by mCPmPO shows η_c,max, η_p,max and η_EQE,max of 46.9 cd/A, 39.7 lm/W and 17.6%, respectively.     

Highly efficient near-infrared thermally activated delayed fluorescence material based on a spirobifluorene decorated donor

The development of red/near-infrared (NIR) thermally activated delayed fluorescence (TADF) emitters are relatively lagging due to the spin statistics and energy gap law. Herein, we designed and synthesized a new NIR TADF emitter, 3-(4-(9,9′-spirobi[fluorene]-3-yl(phenyl)amino)phenyl)acenaphtho[1,2-b]pyrazine-8,9-dicarboni-trile (SDPA-APDC), by incorporating a spiro-type electron-donating moiety N,N-diphenyl-9,9′-spirobi[fluorene]-2-amine (SDPA) to an electron-withdrawing unit acenaphtho[1,2-b]pyrazine-8,9-dicarbonitrile (APDC). The photophysical, electrochemical and thermal properties of SDPA-APDC have been systematically explored. Consequently, the emitter was found high photoluminescence quantum yield (PLQY), narrow bandgap, small singlet-triplet energy gap (ΔE_ST) and excellent thermal stability. Furthermore, SDPA-APDC was developed for electroluminescence devices. The doped devices of SDPA-APDC achieved a red emission peak at 696 nm with a maximum external quantum efficiency (EQE) of 10.75%. And the non-doped device exhibited a NIR emission peak at 782 nm with a maximum EQE of 2.55%     

High efficiency blue PhOLEDs using spiro-annulated triphenylamine/fluorene hybrids as host materials with high triplet energy,high HOMO level and high Tg

Two spiro-annulated triphenylamine/fluorene oligomers, namely 4′-(9,9′-spirobifluoren-4-yl)-10-phenyl-10H-spiro[acridine-9,9′-fluorene] (NSF-SF), and 4,4′-di(spiro(triphenylamine-9,9′-fluorene)-2-yl)-spiro(triphenylamine-9,9′-fluorene) (NSF-NSF), are designed and synthesized. Their thermal, electrochemical and photophysical properties were investigated. The introduction of spiro-annulated triphenylamine moieties assurances the high HOMO energy levels of NSF-NSF and NSF-SF at −5.31 eV and −5.33 eV, respectively, which accordingly facilitates the hole injection from nearby hole-transporting layer. Meanwhile, the perpendicular arrangement of the spiro-conformation and the full ortho-linkage effectively prevents the extension of the π-conjugation and consequently guarantees their high triplet energies of 2.83 eV. Phosphorescent organic light-emitting devices (PhOLEDs) with the configurations of ITO/MoO₃/TAPC/EML/TmPyPB/LiF/Al were fabricated by using the two compounds as host materials and bis[2-(4′,6′-difluorophenyl)pyridinato-N,C^2′]iridium(III) picolate (FIrpic) as the dopant. The turn-on voltage of the device B based on NSF-NSF was 2.8 V. Simultaneously, the device exhibited excellent performance with the maximum current efficiency of 41 cd A⁻¹, the maximum power efficiency of 42 lm W⁻¹ and the maximum external quantum efficiency (EQE) of 19.1%. At a high brightness of 1000 cd m⁻², the device remained EQE of 16.2% and the roll-off value of external quantum efficiency is 15%.     

Novel benzothiadiazine 1,1-dioxide based bipolar host materials for efficient red phosphorescent organic light emitting diodes

In this work, three novel bipolar host materials TPA-SA, 3CBZ-SA and 4CBZ-SA have been designed and synthesized by incorporating triphenyl amine and carbazole as donor and benzothiadiazine 1,1-dioxide as an acceptor. These molecules exhibit moderately high triplet energies and bipolar carrier transport characteristics (ambipolarity) which is useful for the exothermic energy transfer to the dopants and also for the balanced carrier injection/transport in the emissive layers. These materials exhibited good performances in PhOLEDs and furnished external quantum efficiency in the range of 10.0–15.0%. Notably, a red phosphorescent device using TPA-SA as the host doped with Ir(pq)₂(acac) exhibited a maximum EQE, power efficiency and current efficiency of 15.0%, 16.0 lm/W, and 25.3 cd A⁻¹, respectively.     

Functionalized terfluorene for solution-processed high efficiency blue fluorescence OLED and electrophosphorescent devices

A new multifunctional blue-emitting terfluorene derivative (TFDPA) featured with triphenylamine groups for hole-transportation and long alkyl chains for solution processability on the conjugation inert bridge centers was reported. TFDPA can give homogeneous thin film by solution process and exhibits high hole mobility (μ_h ≈ 10^?3 cm² V^?1 s^?1) and suitable HOMO for hole injection. Particularly, TFDPA performs efficient deep-blue emission with high quantum yield (～100% in solution, 43% in thin film) and suitable triplet energy (E_T = 2.28 eV), making solution-processed OLED devices of using TFDPA as blue emitter and as host for iridium-containing phosphorescent dopants feasible. The solution-processed nondoped blue OLED device gives saturated deep-blue electroluminescence [CIE = (0.17, 0.07)] with EQE of 2.7%. TFDPA-hosted electrophosphorescent devices performed with EQE of 6.5% for yellow [(Bt)₂Ir(acac)], 9.3% of orange [Ir(2–phq)₃], and 6.9% of red [(Mpq)₂Ir(acac)], respectively. In addition, with careful control on the doping concentration of [(Bt)₂Ir(acac)], a solution-processed fluorescence–phosphorescence hybrided two-color-based WOLED with EQE of 3.6% and CIE coordinate of (0.38, 0.33) was successfully achieved.     

A tris β-diketonate europium(III) complex based OLED fabricated by thermal evaporation method displaying efficient bright red emission

A new tris β-diketonate europium(III) complex [Eu(btfa)₃Py-Im] (Eu-1) (4,4,4-trifluoro-1-phenyl-1,3-butanedione (btfa) and 2-(2-pyridyl)benzimidazole (Py-Im)] has been synthesized and structurally characterized. A single crystal X-ray diffraction analysis shows that Eu-1 is octacoordinated and the coordination sphere is composed of a EuO₆N₂ core with a trigonal dodecahedral (D_2d) geometry. The photophysical properties of Eu-1 were analysed in detail and with the help of the experimental PL data and theoretical modelling, energy transfer rates were calculated, and an energy transfer mechanism is proposed for Eu-1. The complex has been used as the emitting layer (EML) to fabricate organic light emitting diodes (OLEDs). Eight OLEDs, of which four single-EML and four double-EML with varying doping concentration, were fabricated via a thermal evaporation method using Eu-1 as the EML. Under the optimum conditions a highly monochromatic bright red emission (CIE_x,y = 0.640, 0.311) with brightness (B) = 896 cd/m², current efficiency (η_c) = 2.26 cd/A, power efficiency (η_p) = 1.92 lm/W and external quantum efficiency (EQE) = 1.6% at very low V_turn-on = 3.4 V was obtained.     

Highly Efficient,Solution‐Processed,Single‐Layer,Electrophosphorescent Diodes and the Effect of Molecular Dipole Moment

A new family of highly soluble electrophosphorescent dopants based on a series of tris‐cyclometalated iridium(III) complexes (1–4) of 2‐(carbazol‐3‐yl)‐4/5‐R‐pyridine ligands with varying molecular dipole strengths have been synthesized. Highly efficient, solution‐processed, single‐layer, electrophosphorescent diodes utilizing these complexes have been prepared and characterized. The high triplet energy poly(9‐vinylcarbazole) PVK is used as a host polymer doped with 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD) for electron transport. Devices with a current efficiency of 40 cd A^?1 corresponding to an EQE of 12% can thus be achieved. The effect of the type and position of the substituent (electron‐withdrawing group (CF₃) and electron‐donating group (OMe)) on the molecular dipole moment of the complexes has been investigated. A correlation between the absorption strength of the singlet metal‐to‐ligand charge‐transfer (¹MLCT) transition and the luminance spectral red shift as a function of solvent polarity is observed. The strength of the transition dipole moments for complexes 1–4 has also been obtained from TD‐DFT computations, and is found to be consistent with the observed molecular dipole moments of these complexes. The relatively long lifetime of the excitons of the phosphorescence (microseconds) compared to the charge‐carrier scattering time (less than nanoseconds), allows the transition dipole moment to be considered as a “quasi permanent dipole”. Therefore, the carrier mobility is sufficiently affected by the long‐lived transition dipole moments of the phosphorescent molecules, which are randomly oriented in the medium. The dopant dipoles cause positional and energetic disorder because of the locally modified polarization energy. Furthermore, the electron‐withdrawing group CF₃ induces strong carrier dispersion that enhances the electron mobility. Therefore, the strong transition dipole moment in complexes 3 and 4 perturbs both electron and hole mobilities, yielding a reduction in exciton formation and an increase in the device dark current, thereby decreasing the device efficiency.     

Morphological Tuning of the Energetics in Singlet Fission Organic Solar Cells

Effective singlet fission solar cells require both fast and efficient singlet fission as well as favorable energetics for harvesting the resulting triplet excitons. Notable progress has been made to engineer materials with rapid and efficient singlet fission, but the ability to control the energetics of these solar cells remains a challenge. Here, it is demonstrated that the interfacial charge transfer state energy of a rubrene/C₆₀ solar cell can be modified dramatically by the morphology of its constituent films. The effect is so pronounced that a crystalline system is able to dissociate and collect triplets generated through singlet fission whereas an as‐deposited amorphous system is not. Furthermore, a novel technique for studying the behavior of this class of devices using external quantum efficiency (EQE) measurements in the presence of a background light is described. When this method is applied to rubrene/C₆₀ solar cells, it is shown that triplet–triplet annihilation makes significant contributions to photocurrent in the amorphous device—enhancing EQE by over 12% at relatively low intensities of background light (4 mW cm^?2)—while detracting from photocurrent in the crystalline device. Finally, the conclusions on how the material system is affected by its morphology are strengthened by time‐resolved photoluminescence experiments.     

Molecular modification on bisphenanthroimidazole derivative for deep-blue organic electroluminescent material with ambipolar property and high performance

Efficient deep-blue fluorescent emitters are of particular significance in organic light-emitting devices (OLEDs). An ambipolar deep-blue emitter, 4,4′-bis(4-(1-(4-(tert-butyl)phenyl)-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)-1,1′-binaphthalene (2NBTPI), was designed, synthesized and applied in a high-efficiency deep-blue emitting OLED. By modifying with binaphthyl, 2NBTPI exhibits a high thermal stability, deep blue emission as well as spatially separated HOMO and LUMO orbits. Comparing with its mononaphthyl counterpart 1,4-bis(4-(1-(4-(tert-butyl)phenyl)-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)naphthalene (NBTPI), 2NBTPI shows more balanced charge transport properties, better color purity (color index: (0.15, 0.09) versus (0.15, 0.11)), higher external quantum efficiency (EQE) (5.95% versus 5.73%) and slower efficiency roll-off (EQE roll-off at 100 mA cm⁻²: 13.1% versus 27.6%). To the best of our knowledge, OLED performances of 2NBTPI are comparable to the best reported non-doped deep-blue emitters.     

Aggregation induced intermolecular charge transfer in simple nonconjugated donor–acceptor system

The exploration of exciplex for organic light-emitting diodes (OLEDs) has been fleetly developed. However, many of them confront with the problems like phase separation and poor solubility, hampering their utilization in solution process. Hence, a series of soluble exciplex luminophores with the simple architecture of D-spacer-A (mCP-6C-TRZ, phCz-6C-TRZ and 2phCz-6C-TRZ) are synthesized and characterized, in which, the alkyl chain as ample spacer breaks the molecular backbone conjugation, induces intermolecular charge transfer process instead of intramolecular charge transfer in solid state. These materials are endowed with narrowed singlet−triplet splitting energy (ΔE_ST), efficient reverse intersystem crossing (RISC) process, and distinct thermally activated delayed fluorescence (TADF) characteristics. In view of their high triplet energy level (E_T) and bipolar carrier transport ability, where efficient exciplexes are applied as the host, the solution-processed phosphorescence devices realize a low efficiency roll-off of 7.0% at 1000 cd m⁻², high luminance, current efficiency (CE) and external quantum efficiency (EQE) of 25,990 cd m⁻², 20.0 cd A⁻¹ and 6.7%, respectively. These results offer a promising tactic to the establishment of exciplex with TADF feature as host for fabricating efficient solution processed OLEDs.     

Molecular design of large-bandgap host materials and their application to blue phosphorescent organic light-emitting diodes

New large-bandgap host materials with carbazole and carboline moieties were designed and synthesized for high-performance blue phosphorescent organic light-emitting diodes (PhOLEDs). The two kinds of host materials, 9-(4-(9H-carbazol-9-yl)phenyl)-6-(9H-carbazol-9-yl)-9H-pyrido[2,3-b]indole (pP2CZCB) and 9-(3-(9H-carbazol-9-yl)phenyl)-6-(9H-carbazol-9-yl)-9H-pyrido[2,3-b]indole (mP2CZCB), displayed promisingly high triplet energies of ∼2.92–2.93 eV for enhancing the exothermic energy transfer to bis[2-(4,6-difluorophenyl)pyridinato-C²,N](picolinato)iridium(III) (FIrpic) in PhOLED devices. It was found that the blue PhOLEDs bearing the new host materials and the FIrpic dopant exhibited markedly higher external quantum efficiencies (EQEs) than a device made with 1,3-bis(N-carbazolyl)benzene (mCP) as the host. In particular, the PhOLED device made with 3 wt% FIrpic as the dopant and mP2CZCB as the host material displayed a low driving voltage of 4.13 V and the high EQE of 25.3% at 1000 cd m⁻².     

Exploring the influence of different ancillary ligands of heteroleptic Ir(III) complexes on the phosphorescent properties: Emissive rule and photodeactivation dynamics

The complexity of emissive process for five heteroleptic Ir(III) complexes (dfpypy)₂Ir(LˆX), where dfpypy = 4-methyl-2',6'-difluoro-2,3'-bipyridine and LˆX = picolinate (1), dipivaloylmethanate (2), picolinic acid N-oxide (3), N,N'-di-tert-butylbenzamidinate (4), or 5-(4′-methylpyridine-2'-yl)-3-trifluoromethyl-1,2,4-triazole (5) (See Fig. 1), is unveiled by density functional theory (DFT) and quadratic response (QR) time-dependent (TD)DFT calculations including spin-orbit coupling (SOC). Besides the emission wavelength, we would like to pay intense attention on the emissive rule. It is found that the emission likely originates from different triplet states rather than only from the lowest Kasha state for complexes 1, 2, 3, and 5, which indicates they obey dual emission scenarios. In contrast, complex 4 follows the Kasha rule. Different from the total qualitative study, the quantum yield is semi-quantitatively determined in this work. The radiative decay rate constants (k_r) from possible emissive states are quantitatively determined by the quadratic response method. The triplet potential energy surfaces are constructed to elucidate the factors that affect the temperature-dependent nonradiative rate constants (k_nr). Complex 4 have the higher quantum yields in all the investigated complexes because of the larger k_r and smaller k_nr. The metal-centered (³MC) triplet state in the deactivation pathways is confirmed to play a vital role in determining the quantum yield.     

Tetrasubstituted adamantane derivatives with arylamine groups: Solution-processable hole-transporting and host materials with high triplet energy and good thermal stability for organic light-emitting devices

Four new host/hole-transporting materials, namely 4,4′,4″,4‴-(adamantane-1,3,5,7-tetrayl)tetrakis(N,N-diphenylaniline) (4TPA-Ad, 1),4,4′,4″,4‴-(adamantane-1,3,5,7-tetrayl)tetrakis(N,N-di-p-tolylaniline) (4MTPA-Ad, 2), 1,3,5,7-tetrakis(4-(9H-carbazol-9-yl)phenyl)adamantane (4Cz-Ad, 3) and 1,3,5,7-tetrakis(4-(3,6-di-tert-butyl-9H-carbazol-9-yl)phenyl)adamantane (4tBuCz-Ad, 4), were designed and synthesized by incorporating four electron-donating arylamine units into the rigid adamantane skeleton via a simple C–N coupling reaction. Their thermal, photophysical and electrochemical properties were investigated. The molecular design endows the materials with high triplet energies of ∼3.0 eV, good solution processability, high thermal stability and appropriate HOMO levels. Two types of electroluminescent devices using 1–4 as hole-transporting or host materials were fabricated. The device based on 2 as solution-processed hole-transporting material and tris(quinolin-8-yloxy)aluminum as an emitter revealed a maximum current efficiency of 4.2 cd A⁻¹, which was comparable with the TAPC-based control device. The sky-blue device employing 2 as solution-processed host material and 4,6-(difluorophenyl)pyridine-N,C^2′)picolinate (FIrpic) as an emitter showed a maximum current efficiency of 16.6 cd A⁻¹ with Commission Internationale de I’Eclairage (CIE) coordinates of (0.16, 0.32).