A 90-nm logic technology featuring strained-silicon

A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.     

A physically based analytical model for the threshold voltage of strained-Si n-MOSFETs

A physically based analytic model for the threshold voltage V/sub t/ of long-channel strained-Si--Si/sub 1-x/Ge/sub x/ n-MOSFETs is presented and confirmed using numerical simulations for a wide range of channel doping concentration, gate-oxide thicknesses, and strained-Si layer thicknesses. The threshold voltage is sensitive to both the electron affinity and bandgap of the strained-Si cap material and the relaxed-Si/sub 1-x/Ge/sub x/ substrate. It is shown that the threshold voltage difference between strained- and unstrained-Si devices increases with channel doping, but that the increase is mitigated by gate oxide thickness reduction. Strained Si devices with constant, high channel doping have a threshold voltage difference that is sensitive to Si cap thickness, for thicknesses below the equilibrium critical thickness for strain relaxation.     

High-mobility ultrathin strained Ge MOSFETs on bulk and SOI with low band-to-band tunneling leakage: experiments

For the first time, the tradeoffs between higher mobility (smaller bandgap) channel and lower band-to-band tunneling (BTBT) leakage have been investigated. In particular, through detailed experiments and simulations, the transport and leakage in ultrathin (UT) strained germanium (Ge) MOSFETs on bulk and silicon-on-insulator (SOI) have been examined. In the case of strained Ge MOSFETs on bulk Si, the resulting optimal structure obtained was a UT low-defect 2-nm fully strained Ge epi channel on relaxed Si, with a 4-nm Si cap layer. The fabricated device shows very high mobility enhancements >3.5/spl times/ over bulk Si devices, 2/spl times/ mobility enhancement and >10/spl times/ BTBT reduction over 4-nm strained Ge, and surface channel 50% strained SiGe devices. Strained SiGe MOSFETs having UT (T/sub Ge/<3 nm) very high Ge fraction (/spl sim/ 80%) channel and Si cap (T/sub Si cap/<3 nm) have also been successfully fabricated on thin relaxed SOI substrates (T/sub SOI/=9 nm). The tradeoffs in obtaining a high-mobility (smaller bandgap) channel with low tunneling leakage on UT-SOI have been investigated in detail. The fabricated device shows very high mobility enhancements of >4/spl times/ over bulk Si devices, >2.5/spl times/ over strained silicon directly on insulator (SSDOI; strained to 20% relaxed SiGe) devices, and >1.5/spl times/ over 60% strained SiGe (on relaxed bulk Si) devices.     

A logic nanotechnology featuring strained-silicon

Strained-silicon (Si) is incorporated into a leading edge 90-nm logic technology . Strained-Si increases saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10 and 25%, respectively. The process flow consists of selective epitaxial Si/sub 1-x/Ge/sub x/ in the source/drain regions to create longitudinal uniaxial compressive strain in the p-type MOSFET. A tensile Si nitride-capping layer is used to introduce tensile uniaxial strain into the n-type MOSFET and enhance electron mobility. Unlike past strained-Si work: 1) the amount of strain for the n-type and p-type MOSFET can be controlled independently on the same wafer and 2) the hole mobility enhancement in this letter is present at large vertical electric fields, thus, making this flow useful for nanoscale transistors in advanced logic technologies.     

On the threshold Voltage of strained-Si-Si/sub 1-x/Ge/sub x/ MOSFETs

The threshold voltage shifts (/spl Delta/V/sub t(SS)/ relative to V/sub t/ of Si-control devices) in strained-Si-Si/sub 1-x/Ge/sub x/ (SS) CMOS devices are carefully examined in terms of the shifted two-dimensional energy subbands and the modified effective conduction- and valance-band densities of states. Increased electron affinity as well as bandgap narrowing in the SS layer are shown to be the predominant components of /spl Delta/V/sub t(SS)/, whereas the density-of-state terms tend to be relatively small but not insignificant. The study reveals, for both n-channel and p-channel SS MOSFETs, important physical insights on the varied surface potential at threshold, defined by energy quantization as well as the strain, and on the shifted flat-band voltage that is also part of /spl Delta/V/sub t(SS)/. Models for /spl Delta/V/sub t(SS)/ dependent on the Ge content (x), with comparisons to published data, are presented and used to show that redesign of channel doping in the SS nMOSFET to increase the significantly reduced V/sub tn(SS)/ for off-state current control tends to substantively diminish the inherent SS CMOS relative speed enhancement, e.g., by more than 40% for x=0.20. Interestingly, the SS pMOSFET model predicts small increases in the magnitude of V/sub tp(SS)/.     

Scaling fully depleted SOI CMOS

Quasi-two-dimensional (2-D) device analyses, 2-D numerical device simulations, and circuit simulations of nanoscale conventional, single-gate fully depleted (FD) silicon-on-insulator (SOI) CMOS are done to examine the scalability and performance potential of the technology. The quasi-2-D analyses, which can apply to double-gate devices as well, also provide a simple expression to estimate the effective channel length (L/sub eff/) of FD/SOI MOSFETs. The insightful results show that threshold-voltage control via channel doping and polysilicon gates is not a viable option for extremely scaled FD/SOI CMOS, and hence that undoped channels and metal gate(s) with tuned work function(s) must be employed. Quantitative as well as qualitative insights gained on the short-channel effects reveal the need for ultrathin films (t/sub Si/ < 10 nm) for L/sub eff/ < 50 nm. However, the implied manufacturing burden, compounded by effects of carrier-energy quantization for ultrathin t/sub Si/, forces a pragmatic limit on t/sub Si/ of about 5 nm, which in turn limits the scalability to L/sub eff/ = 25-30 nm. Unloaded CMOS-inverter ring-oscillator simulations, done with our process/physics-based compact model (UFDG) in SPICE3, show very good performance for L/sub eff/ = 35 nm, and suggest viable technology designs for low-power as well as high-performance applications. These simulations also reveal that moderate variations in t/sub Si/ can be tolerated, and that the energy quantization significantly influences the scaled-technology performance and hence must be properly accounted for in optimal FD/SOI MOSFET design.     

Discrete Dopant Effects on Statistical Variation of Random Telegraph Signal Magnitude

This paper discusses the discrete channel dopant effects on the statistical variation of random telegraph signal (RTS) magnitude, which is defined by the threshold-voltage shift by RTS in MOSFETs. An analytical model for the statistical variation of RTS magnitude is presented. Considering discrete dopant effects, the RTS magnitude of MOSFETs exhibits a log-normal distribution, while the threshold voltage itself exhibits a normal distribution. The threshold-voltage shift by RTS will become a serious concern in 50-nm Flash memories and beyond.     

Influence of high channel doping on the inversion layer electron mobility in strained silicon n-MOSFETs

In this letter, we investigate the dependence of electron inversion layer mobility on high-channel doping required for sub-50-nm MOSFETs in strained silicon (Si), and we compare it to co-processed unstrained Si. For high vertical effective electric field E/sub eff/, the electron mobility in strained Si displays universal behavior and shows enhancement of 1.5-1.7/spl times/ compared to unstrained Si. For low E/sub eff/, the mobility for strained Si devices decreases toward the unstrained Si data due to Coulomb scattering by channel dopants.     

Stress-related hydrogen degradation of 0.1-/spl mu/m InP HEMTs and GaAs PHEMTs

Hydrogen degradation of III-V field-effect transistors (FETs) is a serious reliability concern. Previous work has shown that threshold-voltage shifts induced by H/sub 2/ exposure in 1-/spl mu/m-channel InP high-electron mobility transitors (HEMTs) can be attributed to compressive stress in the gate due to the formation of TiH/sub x/ in Ti/Pt/Au gates. The compressive stress affects the device characteristics through the piezoelectric effect. This paper examined the H/sub 2/ sensitivity of 0.1-/spl mu/m strained-channel InP HEMTs and GaAs pseudomorphic HEMTs. After exposure to H/sub 2/, the threshold voltage V/sub T/ of both types of devices shifted positive. This positive shift in V/sub T/ is predicted by a model for hydrogen-induced piezoelectric effect. In situ V/sub T/ measurements reveal distinct time dependences of the V/sub T/ shifts, which are also consistent with stress-related phenomena.     

Asymmetric energy distribution of interface traps in n- and p-MOSFETs with HfO/sub 2/ gate dielectricon ultrathin SiON buffer layer

The variable rise and fall time charge-pumping technique has been used to determine the energy distribution of interface trap density (D/sub it/) in MOSFETs with a HfO/sub 2/ gate dielectric grown on an ultrathin (<1 nm)-SiON buffer layer on Si. Our results have revealed that the (D/sub it/) is higher in the upper half of the bandgap than in the lower half of the bandgap, and are consistent with qualitative results obtained by the subthreshold current-voltage (I--V) measurements, capacitance-voltage (C-V), and ac conductance techniques. These results are also consistent with the observation that n-channel mobilities are more severely degraded than p-channel mobilities when compared to conventional MOSFETs with SiO/sub 2/ or SiON as the gate dielectric.     

Threshold voltage modeling and the subthreshold regime of operationof short-channel MOSFETs

An analytical model for the subthreshold regime of operation of short-channel MOSFETs is presented, and expressions for the threshold-voltage shift associated with the drain-induced barrier lowering (DIBL) caused by the application of a drain bias are developed. The amount of drain-bias-induced depletion charge in the channel is estimated, and an expression for the distribution of this charge along the channel is developed. From this distribution, it is possible to find the lowering of the potential barrier between the source and the channel, and the corresponding threshold-voltage shift. The results are compared with experimental data for deep-submicrometer NMOS devices. Expressions for the subthreshold current and for a generalized unified charge control model (UCCM) for short-channel MOSFETs are presented. The theory is applicable to deep-submicrometer devices with gate lengths larger than 0.1 μm. The model is suitable for implementation in circuit simulators     

Control of threshold-voltage and short-channel effects in ultrathin strained-SOI CMOS devices

This paper presents a quantitative study on the device design for the control of threshold-voltage and the suppression of short-channel effects (SCEs) in ultrathin strained-silicon-on-insulator (strained-SOI) CMOSFETs in the sub-100-nm regime. A two-dimensional device simulation is used for this purpose, with emphasis on the impact of band offset in Si/SiGe heterostructures. For the control of threshold-voltage, the combination of the gate work function and the back gate bias is needed to obtain appropriate values of threshold-voltage in n- and p-channel MOSFETs and to suppress SiGe buried channels in p-channel MOSFETs with thicker strained-Si layers. Regarding SCEs, the importance and the necessity of thin SiGe layers are pointed out from the viewpoint of the influence of the higher permittivity of SiGe layers. It is shown that the SCEs of strained-SOI MOSFETs with thinner SiGe layers are almost the same level as those of unstrained-SOI.     

Modeling study of the impact of surface roughness on silicon and Germanium UTB MOSFETs

We outlined a simple model to account for the surface roughness (SR)-induced enhanced threshold voltage (V/sub TH/) shifts that were recently observed in ultrathin-body MOSFETs fabricated on <100> Si surface. The phenomena of enhanced V/sub TH/ shifts can be modeled by accounting for the fluctuation of quantization energy in the ultrathin body (UTB) MOSFETs due to SR up to a second-order approximation. Our model is then used to examine the enhanced V/sub TH/ shift phenomena in other novel surface orientations for Si and Ge and its impact on gate workfunction design. We also performed a calculation of the SR-limited hole mobility (/spl mu//sub H,SR/) of p-MOSFETs with an ultrathin Si and Ge active layer thickness, T/sub Body/<10 nm. Calculation of the electronic band structures is done within the effective mass framework via the Luttinger Kohn Hamiltonian, and the mobility is calculated using an isotropic approximation for the relaxation time calculation, while retaining the full anisotropy of the valence subband structure. For both Si and Ge, the dependence of /spl mu//sub H,SR/ on the surface orientation, channel orientation, and T/sub Body/ are explored. It was found that a <110> surface yields the highest /spl mu//sub H,SR/. The increasing quantization mass m/sub z/ for <110> surface renders its /spl mu//sub H,SR/ less susceptible with the decrease of T/sub Body/. In contrast, <100> surface exhibits smallest /spl mu//sub H,SR/ due to its smallest m/sub z/. The SR parameters, i.e. autocorrelation length (L) and root-mean-square (/spl Delta//sub rms/) used in this paper is obtained from the available experimental result of Si<100> UTB MOSFETs, by adjusting these SR parameters to obtain a theoretical fit with experimental data on SR-limited mobility and V/sub TH/ shifts. This set of SR parameters is then employed for all orientations of both Si and Ge devices.     

Impacts of additive uniaxial strain on hole mobility in bulk Si and strained-Si p-MOSFETs

Hole mobility changes under uniaxial and combinational stress in different directions are characterized and analyzed by applying additive mechanical uniaxial stress to bulk Si and SiGe-virtual-substrate-induced strained-Si (s-Si) p-MOSFETs (metal-oxide-semiconductor field-effect transistors) along <110> and <100> channel directions. In bulk Si, a mobility enhancement peak is found under uniaxial compressive strain in the low vertical field. The combination of (100) direction uniaxial tensile strain and substrate-induced biaxial tensile strain provides a higher mobility relative to the (110) direction, opposite to the situation in bulk Si. But the combinational strain experiences a gain loss at high field, which means that uniaxial compressive strain may still be a better choice. The mobility enhancement of SiGe-induced strained p-MOSFETs along the (110) direction under additive uniaxial tension is explained by the competition between biaxial and shear stress.     

单轴附加应变对体硅及应变硅p-MOSFETs空穴迁移率的影响

Hole mobility changes under uniaxial and combinational stress in different directions are characterized and analyzed by applying additive mechanical uniaxial stress to bulk Si and SiGe-virtual-substrate-induced strained- Si（s-Si）p-MOSFETs（metal-oxide-semiconductor field-effect transistors）along 110 and 100 channel directions. In bulk Si,a mobility enhancement peak is found under uniaxial compressive strain in the low vertical field.The combination of 100 direction uniaxial tensile strain and substrate-induced biaxial tensile strain provides a higher mobility relative to the 110 direction,opposite to the situation in bulk Si.But the combinational strain experiences a gain loss at high field,which means that uniaxial compressive strain may still be a better choice.The mobility enhancement of SiGe-induced strained p-MOSFETs along the 110 direction under additive uniaxial tension is explained by the competition between biaxial and shear stress.     

Effect of substrate biasing on Si/SiGe heterostructure MOSFETs for low-power circuit applications

We have investigated the effect of substrate biasing on the subthreshold characteristics and noise levels of Si/Si/sub 1-x/Ge/sub x/ (x=0,0.15,0.3) heterostructure MOSFETs. A detailed analysis of the dependence of threshold voltage, off-state current, and low-frequency noise level on the substrate-source (V/sub bs/) biasing showed that SiGe heterostructure MOSFETs offer a significant speed advantage, an extended subthreshold operation region, a reduced noise level, and reduced bulk potential sensitivity compared to Si bulk devices. These experimental results demonstrate that SiGe heterostructure MOSFETs render a promising extension to the CMOS technologies at the low-power limit of operation, eventually making the micropower implementation of radio frequency (RF) functions feasible.     

Highly reliable CVD-WSi metal gate electrode for nMOSFETs

In this paper, we first propose an improved chemical vapor deposition (CVD) WSi/sub x/ metal gate suitable for use in nMOSFETs. We studied the relationship between the Si/W ratio of CVD-WSi/sub x/ film and electrical properties of MOSFETs. As a result, it was found that the Si/W ratio strongly affects carrier mobility and the reliability of gate oxide. In the case of higher Si/W ratio, both electron and hole mobility can be improved. For CVD-WSi/sub 3.9/ electrode, electron mobility and hole mobility at 1.2 V of |V/sub g/-V/sub th/| are 331 and 78 cm/sup 2//V/spl middot/s, respectively. These values are almost the same as those for n/sup +/-poly-Si electrode. The improvement of carrier mobility by controlling the Si/W ratio is due to suppression of fluorine contamination in gate oxide. F contamination at the Si/W ratio of 3.9 is found to be less than that at the Si/W ratio of 2.4 from XPS analysis. Workfunction of CVD-WSi/sub 3.9/ gate estimated from C-V measurements is 4.3 eV. In CVD-WSi/sub 3.9/ gate MOSFETs with gate length of 50 nm, a drive current of 636 /spl mu/A//spl mu/m was achieved for off-state leakage current of 35 nA//spl mu/m at power supply voltage of 1.0 V. By using CVD-WSi/sub 3.9/ gate electrode, highly reliable metal gate nMOSFETs can be realized.     

Scalability of the Si/sub 1-x/Ge/sub x/ source/drain technology for the 45-nm technology node and beyond

The authors present a study on the layout dependence of the silicon-germanium source/drain (Si/sub 1-x/Ge/sub x/ S/D) technology. Experimental results on Si/sub 1-x/Ge/sub x/ S/D transistors with various active-area sizes and polylengths are combined with stress simulations. Two technologically important configurations are investigated: the nested transistor, where a polygate is surrounded by other gates, and isolated transistors, where the active area is completely surrounded by isolation oxide. The channel stress, caused by epitaxial Si/sub 1-x/Ge/sub x/ is reduced substantially when the active area is decreased from a large size towards typical values for advanced CMOS technology nodes. Nested transistors with longer gate lengths are more sensitive towards layout scaling than shorter gates. Increasing recess depth and germanium concentration gives larger channel stress, but does not change layout sensitivity. Increased lateral etching leads to higher stress, as well as to reduced layout sensitivity. In small-size transistors, there exists an optimal recess depth, beyond which the stress in the channel will not increase further. For isolated transistor structures, the interaction between Si/sub 1-x/Ge/sub x/ and the isolating oxide can even lead to stress reduction when the recess depth is increased. When technology advances, active-area dimensions will be scaled together with gate lengths and widths. For typical sizes of advanced silicon CMOS Si/sub 1-x/Ge/sub x/ S/D transistors, simulations indicate that the channel stress can be maintained in future technology nodes.     

Status and Trends in Advanced SOI Devices and Materials

A review of recently explored effects in advanced SOI devices and materials is given. The effects of key device parameters on the electrical and thermal floating body effects are shown for various device architectures.Recent advances in the understanding of the sensitivity of electron and hole transport to the tensile or compressive uniaxial and biaxial strains in thin film SOI are presented. The performance and physical mechanisms are also addressed in multi-gate Si, SiGe and Ge MOSFETs. New hot carrier phenomena are discussed. The effects of gate misalignment or underlap,as well as the use of the back gate for charge storage in double-gate nanodevices and of capacitorless DRAM are also outlined.     

Deteriorated radiation effects impact on the characteristics of MOS transistors with multi-finger configuration

The deteriorated radiation effects of very deep-sub-micron (VDSM) MOS transistors with multi-finger are experimentally investigated for the first time. The results show that due to the interaction between reverse narrow channel effect and radiation induced edge effect, multi-finger transistors are more sensitive to radiation in comparison with standard MOSFETs. Larger threshold-voltage shift and higher leakage current are observed. The mechanisms responsible for the effects are briefly discussed. The results demonstrate that special radiation hardening technology should be adopted for multi-finger transistors operating in the radiation environment.