Synthesis and Dielectric Properties of Ba3NaBiNb10O30 Ceramics

A new niobate Ba3 NaBiNb10O30 was synthesized by the solid state reaction. The reaction mixture was characterized by thermogravimetric and differential thermal analysis ( TG-DTA ), X-ray diffraction and dielectric constant measurements. The results show that Ba3NaBiNb10O30 has an orthorhombic tungsten bronze structure with space group Cmm2 and the unit cell parameters are a = 1. 7660( 1 ) mm, a = 1. 7626( 1 ) mm, c = 0.78621(6) mm, Z = 4. Ba3 NaBiNb10O30 undergoes two phase transitions at 200℃ and 400℃, respeaively.     

Preparation, Characterization and Dielectric Property of Sr5 LaTi3 Nb7O30 Ceramic

Sr5LaTi3Nb7O30 ceramic was prepared by the conventional high temperature solid-state reaction route. The sintered samples were characterized by X-ray diffraction, scanning electron microscopy ( SEM ), differential thermal calorimetry ( DSC ) and dielectric measurements. The results show Sr5LaTi3Nb7O30 belongs to paraclectric phase of filled tetrngonal TB structure at room temperature, and undergoes a diffuse phase transition in the temperature range of -54-34℃ . And Sr5LaTi3Nb7O30 ceramic shows a high dielectric constant of 479 with a low dielectric loss of 0.005 at 1MHz . In comparison with Ba-based ceramics with TB structure, the temperature coefficients of the dielectric constant ( τt ) is significantly reduced.     

Synthesis and Characteristic of a New Niobate： BasNaCr0.5Nb9.5O30

A new niobate crystal was synthesized for the first time in BaO-NaO-Cr2O3-Nb2O3 system by the solid state reacition and the flux method. The new compound was studied by X-ray diffraction, electron probe, X-ray microanalysis, chemical analysis and SEM. The result of X-ray powder diffraction shows that Ba5NaCr0.5 Nb9.5O30 belongs to the tetragonal tungsten bronze structure, with space group P4 bin(100) and lattice parameters a=b=12. 4450 (2) A, c=3.9931 (2) A and Z=1. The X-ray powder diffraction lines of the compound were well indexed.     

Low-temperature sintering and microwave dielectric properties of Ba<Subscript>2</Subscript>Ti<Subscript>3</Subscript>Nb<Subscript>4</Subscript>O<Subscript>18</Subscript> ceramics

The effects of CuO and H3BO3 additions on the low-temperature sintering,microstructure,and microwave dielectric properties of Ba2Ti3Nb4O18 ceramics were investigated.The addition of less amount of CuO (< 1 wt%) considerably facilitated the densification of Ba2Ti3Nb4O18 ceramics.Appropriate addition of H3BO3 (< 3.5 wt%) remarkably improved the microwave dielectric properties of ceramics.The addition of H3BO3 and CuO successfully reduced the sintering temperature of Ba2Ti3Nb4O18 ceramics from 1300 to 1050 ℃.B...     

Nanocomposite films of V<Subscript>2</Subscript>O<Subscript>5</Subscript>−MoO<Subscript>3</Subscript> xerogel with poly ethylene oxide intercalation

Poly ethylene oxide (PEO)_x−V₂O₅−V₂O₅−MoO₃ (x=0, 0.5, 1) films were prepared by the sol-gel method. The synthesis and structure of the films were investigated by XRD, TG-DTA, FTIR, etc. The results show that V₂O₅−MoO₃ xerogel has a layered structure and its interlayer space increased from 1.3181 nm at x=0 to 1. 7898 nm at x=1 after the nanocomposite films were dried, and PEO in the interlayer changes the interface structure by forming hydrogen bonds with V=0 bands. CV measurement indicates that the intercalation of PEO improves insertion/extration properties of Li⁺ ions in the interlayer. ZHENG Jin-xia: Born in 1976 Funded by the National Natural Science Foundation of China (No. 50172036) and Natural Science Foundation of Hubei Province(No. 2001ABB083)     

Structure and dielectric properties of ZnO and Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> doped BaO-TiO<Subscript>2</Subscript> system microwave ceramics

The microwave dielectric properties and microstructure of BaTi4.3ZnyO9.6＋y ＋0.02 mol% SnO2＋0.01 mol% MnCO3＋x mol% Nb2O5（x=0-0.05, y=0-0.08） system ceramics were studied as a function of the amount of ZnO and Nb2O5 doped. Addition of （y=0-0.05） ZnO and （x=0-0.025） Nb2O5 enhanced the reactivity and decreased the sintering temperature effectively. It also increased the dielectric constant ε r and quality factor Q（=1/tan 8） of the system due to the substitution of Ti^4＋ ions with incorporating Zn^2＋and Nb^5＋ ions, which was analyzed by the reaction ZnO＋Nb2O5＋ 3 TiTxTi →ZnTi＋ 2NbTi＋3TiO2. When the system doped with （y=0.05） ZnO and （x=0.025） Nb205 were sintered at 1 160 ℃ for 6 h, the εr. Qf0 value and rfwere 36.5, 42 000 GHz, and＋1.8 ppm/℃, respectively, at 5 GHz.     

Synthesis and characterization of (PEO)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>−(V<Subscript>0.85</Subscript>Mo<Subscript>0.15</Subscript>)<Subscript>2</Subscript>O<Subscript>5</Subscript> nanocomposite films

(PEO) _x −(V_0.85Mo_0.15)₂O₅(x=0,0.5,1.0) nanocomposite films were prepared by a modified sol-gel method. The structure of the films was analyzed by XRD, and the DC electrical conductivity. Cyclic voltammogram and optical spectral transmittance were investigated. The results show that the (V_0.85Mo_0.15)₂O₅ xerogel has a layered structure and its interlayer space increased from 1.3181 nm at x=0 to 1.7897 nm at x=1.0. The introduction of MoO₃ improved the DC electrical conductivities of the films due to the generation of V₄₊ to maintain the electrical neutrality of the oxides. PEO intercalated in the interlayer of (V_0.85Mo_0.15)₂O₅ oxides has interaction with the oxides, enhancing the amount of Li⁺ ions inserted into the interlayer of the oxides. Moreover, the intercalation of PEO into the interlayer of (V_0.85Mo_0.15)₂O₅ oxides improved the cathodic electrochromic property in near ultraviolet region and anodic electrochromic property in visible range. JIANG Cong-sheng: Born in 1963 Supported by the Science Foundation of Hubei Province (Grant No. 2001ABB083)     

Synthesis and characterization of a new Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> pillared triple-layered perovskite KSr<Subscript>2</Subscript>Nb<Subscript>3</Subscript>O<Subscript>10</Subscript>

A n-Hexyl NH₃Sr₂Nb₃O₁₀ is obtained by the stepwise ion-exchange reaction, then is dispersed in aqueous solution of trinuclear acetato-hydroxo iron (III) nitrate, [Fe₃(OCOCH₃)₇OH·2H₂O]NO₃, and the interlayer potassium cations of the perovskite niobate are exchanged with the partially hydrolyzed trinuclear acetato complex ions. On heating, the exchanged complex ions are converted into iron oxide pillars which keep the perovskite sheets apart. The product is characterized by XRD, SEM, EDAX and surface area measurement respectively. Zhang Hui: Born in 1970 Funded by the National Natural Science Foundation of China (No. 50002007), Major Program of Ministry of Education (No. 0201) and Open Foundation of State Key Lab of Advanced Tech. for Materials Synthesis and Processing.     

Preparation, Characterization and Dielectric Properties of Ba6Mg0.67Nb9.33O30 Ceramic

A new niobate Ba6Mg0.67Nb9.33O30 was ssnthesized in the BaO-MgO-Nb2O5 system by solid state reaction at 1350 ℃ for 48 b. The strncture and dielectric properties of Ba6Mg0.67Nb9.33O30 were determined by X-ray pouder diffraction, straining electron microscopy and dielectric measurements. The results show that Ba6Mg0.67Nb9.33O30 belongs to ferroelectric phase of filled tetragonal tungsten bronze structure at room temperature with unit cell parameters ： a = 1. 26052（4） nm , c = 0.40045（2） nm, space group P4bm , calculated density 5 . 707g. cm ^-3 . Ba6Mg0.67Nb9.33O30 belongs to relaxor ,ferroetectrics undergoing diffusive phase transition, and the transition temperature （ Tc ） is 30 ℃ observed at 10 kHz. At room temperature, Ba6Mg0.67Nb9.33O30 eeramic has a high dielectric constant 850 at 1 MHz and a low dielectric loss of 0. 0052.     

Dielectric tunable properties of BaTi<Subscript>4</Subscript>O<Subscript>9</Subscript>-doped Ba<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>TiO<Subscript>3</Subscript> microwave composite ceramics

BaTi₄O₉-doped Ba_0.6Sr_0.4TiO₃ (BST) composite ceramics were prepared by the conventional solid-state reaction and their structure, dielectric nonlinear characteristics and microwave dielectric properties were investigated. The secondary phase of the orthorhombic structure Ba₄Ti₁₃O₃₀ is formed among BST composite ceramics with the increase of BaTi₄O₉. At the same time, a duplex or bimodal grains size distribution shows fine grains in a coarse grain matrix. The degree of frequency dispersion of dielectric permittivity below T _m is increased initially and then decreased with respect to BaTi₄O₉. As the BaTi₄O₉ content increases, the tunability of composite ceramics decreases, while the Q value increases. Interestingly, 70 wt% BaTi₄O₉-doped BST has a tunability ∼4.0% (under 30 kV/cm biasing) versus a permittivity ∼68 and quality factor ∼134.1 (at ∼3.2 GHz). Supported by the Ministry of Science and Technology of China through 973-project (Grant No. 2009CB623302), the Cultivation Fund of the Key Scientific and Technical Innovation Project, Ministry of Education of China (Grant No.707024), Shanghai Committee of Science and Technology (Grant No. 07DZ22302), and Shanghai Foundation Project under 06JC14070     

Preparation and characterization of nanocomposite MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript>

Nanocomposites MgFe₂O₄/SiO₂ were successfully synthesized by the sol-gel method in the presence of N, N-dimethylformamide (DMF). The formation of pure MgFe₂O₄ was confirmed by powder X-ray diffraction (XRD) and electron diffraction. The structural evolution of MgFe₂O₄ nanocrystals was followed by powder X-ray diffraction and IR absorption spectroscopy. The formation of spinel structure of MgFe₂O₄ started at 800 °C, and completed at 900 °C. The transmission electron microscopy (TEM) measurements suggest that the particle sizes increase with the increasing annealing temperature, and the mean particle sizes of the spherical samples annealed at 800 °C, 900 °C and 1 050 °C are ca. 3 nm, 8 nm and 11 nm, respectively. Magnetization measurements at room temperature and 78 K indicate superparamagnetic nature of these MgFe₂O₄ nanocrystals. Funded by the National Natural Science Foundation of China(No. 30771676), the Natural Science Foundation of Jiangsu Province (No. BK20081842), and the Foundation of Nanjing Bureau of Personal for the Returned Overseas Chinese Excellent Scholars     

Fabrication and mechanical properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiAl composites

Al₂O₃/TiAl composites were successfully fabricated by hot-press-assisted exothermic dispersion method with elemental powder mixtures of Ti, Al TiO₂ and Nb₂O₅, and the microstructure and mechanical properties were investigated. The results indicate the fine Al₂O₃ particles tend to disperse on the grain boundaries. The grain size of TiAl matrix decreases and the hardness increases with increasing Nb₂O₅ content. The bending strength and fracture toughness reach to a maximum when Nb₂O₅ content is 6 wt%, under 642 MPa and 6.69 MPa·m^1/2, respectively. Based on the fractography and the observation of crack propagation path, it is concluded that the strengthening and toughening of such composites at room temperature can be attributed to the refinement of the TiAl matrix, the deflection behavior in the crack propagation and the dispersion of Al₂O₃ particles.     

Synthesis and luminescence of nano fluorescent powder of Y<Subscript>4</Subscript>Al<Subscript>2</Subscript>O<Subscript>9</Subscript>: Eu<Superscript>3+</Superscript>

Nano fluorescent powder of Y₄Al₂O₉: Eu³⁺ was synthesized by sol-gel method. The XRD shows that the product prepared at 900°C is pure-phase Y₄Al₂O₉: Eu³⁺. The Y₄Al₂O₉ powder is nano-size crystal testified by BF and ED analysis of TEM. The grain diameter of Y₄Al₂O₉ is in the range between 20 and 50nm, and its average is 30 nm. The luminescent spectra show that Eu³⁺ ious occupy two kinds of sites in Y₄Al₂O₉ crystal lattice. One is in the strict inversion center, and the other is in off lying inversion center. When excited with UV light (λ=254nm), Y₄Al₂O₉: Eu³⁺ exhibits an orange emission bond at λ=590 nm due to the⁵D_o→⁷F₁ transition and a red emission band at λ=610 nm due to⁵D_o→⁷F₂ transition. YUAN Xi-ming: Born in 1951 Funded by Key Scientific and Technological Project of Hubei Province (2001 AA102A03)     

Solid Solution Characteristics of Pb（B1/3Nb2/3）O3-bascd Composite Ceramics

The solid solution characteristics of Pb（B1/3Nb2/3）O3-based （B=Zn^2＋, Mg^2＋, Ni^2＋） composite ceramics prepared by two-phase mixed-sintering method were developed based on dielectric measurements. Results show that there are double dielectric peaks for PZN-based composite ceramic, implying two phases coexist. However single dielectric peak was presented in PMN- and PNN-based composite ceramics, respectively. It is indicated that obvious solid solution reaction exists during the sintering process of these two systems. The effects of B-site ion difference on the solid solution characteristics were discussed by crystal chemistry. SEM was employed to investigated the microstructures of composite ceramics. The influences of solid solution reaction on grain growth were discussed.     

Characterization and photocatalytic activity of KSr<Subscript>2</Subscript>Nb<Subscript>5</Subscript>O<Subscript>15</Subscript> with tungsten bronze structure

Tungsten bronze (TB) type potassium strontium niobate KSr₂Nb₅O₁₅ was prepared by solid-state reaction method, and was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-vis diffuse spectrum. The photocatalyst shows high photocatalytic activity of photodegrading acid red G. The effects of photocatalyst dosage and initial concentration of acid red G on the photodegradation process were studied. The kinetics of photocatalytic degradation of acid red G by KSr₂Nb₅O₁₅ catalyst follows the first order reaction.     

Structure and Electrical Properties of （Na0.5Bi0.5）0.94Ba0.06TiO3 Ceramicwith0.5wt% of MnO

The structure and electrical properties of （Na0.5Bi0.5）0.94Ba0.06TiO3 ceramic doped with 0.5 wt% of MnO were investigated in comparison with those of （Na0.5Bi0.5）0.94Ba0.06TiO3 ceramic. It was ascertained that the MnO addition did not cause remarkable change in crystal structure and microstructure. The MnO addition mainly displayed a hard effect on the electrical properties, an increase of coercive field （E） and mechanical quality factor （Qm） together with a decrease of dielectric constant （εr） and piezoelectric constant （d33）. An enhancement of electromechanical coupling factor （kp） with the MnO addition was obtained too. An essential relation between the piezoelectric properties and ferroelectric nature of the ceramics was detected. It was found that the piezoelectric properties of the ceramics highly depended on the corporative contribution of remanent polarization （Pt） and coercive field.     

Preparation and characteristics of Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/MgF<Subscript>2</Subscript>/Au tunnel junction

The fabrication process of Cu/Al₂O₃/MgF₂/Au double-barrier metal/insulator/metal junction (DMIMJ) was introduced, and more stable light emission from this junction was successfully observed. The light emission physical mechanism of the junction was discussed. Results show that light emission spectrum of this structure locates at wavelength of 250–700 nm with two peaks at around 460 nm and 640 nm, which moves towards shorter wavelength region in comparison with that of the Al/Al₂O₃/Au junction. The light emission efficiency of this junction ranges from 0.7×10⁻⁵–2.0×10⁻⁵, which is 1 to 2 orders higher than that of the single-barrier Al/Al₂O₃/Au junction. The improved properties of this structure should be due to the electrons resonant tunneling effect in the double-barrier.     

Novel preparation and XPS analysis of V<Subscript>2</Subscript>O<Subscript>5</Subscript> xerogel

The V₂O₅ sol was fabricated by ultra-fast quenching. The vanadium with low valence (V⁴⁺) was found in V₂O₅ xerogel films by XPS analysis. The technology of oxygen top-blown was applied to analyze the XPS spectrum difference of V₂O₅ xerogel when the powder of V₂O₅ was melting in air or in oxygen atmosphere. The results show that the different melting atmosphere has certain influences on the chemical valence of V₂O₅ xerogel. ZHU Quan-yao: Born in 1968 Funded by the National Natural Science Foundation of China (No. 50172036, No. 59802009)     

Improved Breakdown Strength in (Ba<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>)<Subscript>0.85</Subscript>Bi<Subscript>0.1</Subscript>TiO<Subscript>3</Subscript> Ceramics with Addition of CaZrO<Subscript>3</Subscript> for Energy Storage Application

(Ba_0.6Sr_0.4)_0.85Bi_0.1TiO₃ ceramics doped with x wt%CaZrO₃ (x= 0-10) were synthesized by solid-state reaction method. The effects of CaZrO₃ amount on the dielectric properties and structure of (Ba_0.6Sr_0.4)_0.85Bi_0.1TiO₃ ceramics were investigated. X-ray diffraction results indicated a pure cubic perovskite structure for all samples and that the lattice parameter increased till x=5 and then slightly decreased. A homogenous microstructure was observed with the addition of CaZrO₃. Dielectric measurements revealed a relaxor-like characteristic for all samples and that the diffusivity γ reached the maximum value of 1.78 at x=5. With the addition of CaZrO₃, the dielectric constant dependence on electric field was weakened, insulation resistivity enhanced and dielectric breakdown strength improved obviously and reached 19.9 kV/mm at x=7.5. In virtue of low dielectric loss (tan δ<0.001 5), moderate dielectric constant (ε_r >1 500) and high breakdown strength (E_b >17.5 kV/mm), the CaZrO₃ doped (Ba_0.6Sr_0.4)_0.85Bi_0.1TiO₃ ceramic is a potential candidate material for high power electric applications.     

Microstructure and thermal properties of (1−<Emphasis Type="Italic">x</Emphasis>) As<Subscript>2</Subscript>S<Subscript>3</Subscript>−<Emphasis Type="Italic">x</Emphasis>CdCl<Subscript>2</Subscript> glassy system

The homogenous glass samples of the (1−x) As₂S₃−xCdCl₂ where x=0 and 0.05 were prepared by the conventional melt-quenched method. The addition of 5 mol% CdCl₂ enhanced the glass transition temperature of pure As₂S₃ glass sample by about 30°C. Based on the experimental data, the microstructure is considered to be that the discrete molecule species of AsCl₃ and nanocrystal CdS is homogeneously dispersed in the disordered polymer network formed by AsS₃ pyramids interconnected by sulfur bridges. TAO Hai-zheng : Born in 1973 Funded by the Foundation for Excellent Youth of China.