Effects of crystal field on photoluminescence properties of Ca2Al2SiO7:Eu2+ phosphors

A series of single-phased Ca₂Al₂SiO₇:Eu²⁺ phosphors were synthesized by the solid-state reaction. Their structure and photolumi-nescence properties were investigated by the X-ray powder diffraction （XRD） and excitation and emission spectra in detail. The emission spectra of Ca₂Al₂SiO₇:Eu²⁺ phosphors consisted of blue and green band located at419 and542 nm, respectively. The relative intensities of the blue and green emission changed with Eu²⁺ concentration and were sensitive to the excitation wavelength. The unique photoluminescence property originated from the 4f⁷→4f⁶5d transition of Eu²+ at different energy levels, on which the effect of the crystal field strength was con-sidered to be tailed by adjusting the host composition.     

稀土掺杂Sr2MgSi2O7长余辉发光材料的研究进展

硅酸镁锶(Sr2MgSi2O7)作为目前常用的一种长余辉发光材料基质,性能稳定,耐酸碱性能良好。本文介绍了长余辉发光材料的发光原理,综述了近年来Sr2MgSi2O7长余辉发光材料的主要制备方法以及稀土掺杂Sr2MgSi2O7材料的研究进展,并对该材料的发展做出了展望。制备Sr2MgSi2O7长余辉发光材料的方法主要包括高温固相法,溶胶-凝胶法,化学沉淀法和燃烧合成法,其中最常用的为高温固相法。通过掺杂稀土离子可以形成具有不同发光特性的长余辉发光材料。稀土掺杂Sr2MgSi2O7材料作为一种储能、节能的长余辉发光材料,展现出了广阔的发展和应用前景。     

Synthesis and luminescence properties of SrAleO4：Eue＋,Dy3＋ hollow microspheres via a solvothermal co-precipitation method

SrAl2O4:Eu2+,Dy3+ hollow microspheres were successfully prepared through a facile and mild solvothermal co-precipitation combining with a postcalcining process.The structure and particle morphology were investigated by X-ray diffraction(XRD),scanning and transmission electron microscopy(SEM and TEM)pictures,respectively.The mechanism for the formation of spherical SrAl2O4:Eu2+,Dy3+ phosphor was preliminary presented.After being irradiated with ultraviolet(UV)light,the spherical phosphor emitted long-lasting green phosphorescence.Both the photoluminescence(PL)spectra and luminance decay,compared with that of commercial bulky powders,revealed that the phosphors had efficient luminescent and long lasting properties.It was considered that the SrAl2O4:Eu2+,Dy3+ hollow microspheres had promising long-lasting phosphorescence with potential scale-dependent applications in photonic devices.     

Combustion synthesis and luminescence properties of blue NaBaPO4:Eu2+ phosphor

The blue-emitting phosphor NaBaPO4:Eu2+ was prepared by the combustion method. The phase structure and microstructure of the as-prepared samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Under the excita-tion wavelength of 360 nm, the emission spectrum exhibited only one blue band centering at 435 nm, which was ascribed to the 4f65d1→4f7 transition on Eu2+ ions. Compared with the phosphor obtained by solid-state reaction method, the relative emission intensity of sample ob-tained by combustion method increased slightly. The decay times and the temperature dependence luminescence intensities (25-300 oC) were discussed in order to further investigate the potential applications. Furthermore, Eu2+-doped NaBaPO4 phosphor showed higher thermally sta-ble luminescence comparable to commercially available Y3Al5O12:Ce3+ (YAG:Ce3+) phosphor. All the investigated suggestions that Na-BaPO4:Eu2+ is a good phosphor candidate applied in white light emitting diode.     

Sol-gel processed Ce^3＋, Tb^3＋ codoped white emitting phosphors in Sr2Al2SiO7

Sr2Al2SiO7：Ce^3＋, Tb^3＋ white emitting phosphors were fabricated using the sol-gel method. X-Ray Powder Diffraction （XRD） analysis confirmed the formation of Sr2Al2SiO7：Ce^3＋, Tb^3＋. Scanning Electron Microscopy （SEM） observation indicated that the microstructure of the phosphor consisted of regular fine grains with an average size of about 0.5-1 μm. Luminescence properties were analyzed by measuring the photoluminescence spectra. The Ce^3＋, Tb^3＋-codoped Sr2Al2SiO7 phosphors showed four main emission peaks： one at 414 nm for Ce^3＋ and three at 482, 543, and 588 nm for Tb^3＋. The emission spectra of the samples with different doping concentrations showed that the Tb^3＋ emission was dominant because of the persistent energy transfer from Ce^3＋. The decay characteristic was better than that prepared by the solid-state process in the comparable condition. The codoped phosphor displayed long persistent white phosphorescence.     

Influence of concentration and sintering temperature on luminescence properties of Eu^3＋：SnO2 nanocrystallites

The nanopowders of SnO2 doped with different Eu3+ concentrations were synthesized using the modified Pechini method. The Eu3+ concentrations were high above solubility limit. The average size of crystallites was controlled by the sintering temperatures. The structure and the morphology of obtained powders were examined using the XRD (X-ray diffraction) and TEM (transmission electron microscopy) analyses. The Eu2Sn2O7 phase separation was observed at relatively high concentration of Eu3+ ions. The ZnS:Ag micropowders were mixed with the Eu3+:SnO2 powders and their normalized emission was used to measure a relative efficiency of Eu3+:SnO2. The photoluminescence spectra of mixed powders were measured in function of Eu3+ concentration and average size of nanocrystallites. The reference peak method was used for comparison of intensities of the samples and selection of optimal one. The influence of the average grain size and Eu3+ concen-tration on the phosphor’s efficiency was discussed. The presented results confirmed the rightness of synthesis of the Eu3+:SnO2 in form of nanocrystalites with relatively high Eu3+ concentration.     

Photoluminescence properties of Ce3+ doped YSiO2N blue-emitting phosphors

Oxonitridosilicate phosphors with compositions of Y 1-x Ce x SiO 2 N (x=0-0.1) were synthesized by a new synthetic route based on a solid state reaction among YSi, CeSi, SiO 2 and Y 2 O 3 compounds at high temperature and high pressure. The photoluminescence properties dependent on Ce concentration and temperature were investigated. Concentration quenching occurred when the doped Ce 3+ concentration was more than 3 mol.%. The emission spectra showed red shifts from 430 to 447 nm with the increased Ce concentration from 0.5 mol.% to 10 mol.%. The quenching temperature was estimated as ～380 K. The chromaticity coordinates of the excitation and emission spectra were stable against the temperature. This study showed these YSiO 2 N:Ce 3+ phosphors the potential applications in the three-RGB phosphor-converted white LEDs.     

Luminescence properties of Mn2） ions doped Lu2CaMg2Si3O1） garnet phosphors

Yttrium aluminum garnet structure phosphors Lu2CaMg2Si3O12:Mn2+ were synthesized by conventional high temperature solid-state reaction in reductive atmosphere. The structure and optical properties of samples were characterized by application of powder X-ray diffraction (XRD) and photoluminescence spectroscopy. Results of X-ray diffraction (XRD) analysis showed that the phosphors mainly presented garnet structure with a few weak peaks of impurity phases. Lu2-xCaMg2Si3O12:xMn2+ (x=0.01-0.8) phosphors showed a broad emission band peaking at around 590 nm under ultraviolet (UV) light of 408 nm when Mn2+ concentration was less than 0.08 mol. With an increase in the Mn2+ concentration (above 0.08), another broad emission band peaking at 720 nm besides 590 nm was observed, which may be due to manganese ion having different valence and occupying different host lattice. The critical quenching concentrations of manganese ion in the wavelength of 590 and 720 nm were about 0.06 and 0.2 mol, respectively. With 408 nm excitation wavelength, emission color of the samples had a red shift trend as the Mn2+ concentration increased. All the results indicated that the Lu2CaMg2Si3O12:Mn2+ phosphors could be applicable to n-UV based white LEDs.     

Research on Y2O3：Eu Phosphor Coated with In2O3

Y2O3：Eu red phosphor for FED application was prepared by high temperature solid-state reaction. The In2O3 coating by precipitation method to the phosphor was applied and the analyses of XRD, Zeta potential, SEM, EDS and low voltage cathodoluminescence （CL） were conducted for investigating the coating effect. The results showed that In2O3 coating promoted the low voltage CL of the phosphor efficiently. The promotion was possibly due to the enhancement of the surface conductivity of the phosphor grains.     

白光LED用LaPO4:Eu3+红色荧光粉的合成与表征

利用水热法制备了性能稳定的红色荧光粉LaPO4:Eu3+,同时研究了不同的Eu3+浓度、煅烧温度对荧光粉发光性能的影响.通过X射线粉末衍射(XRD)和扫描电子显微镜(SEM)来表征荧光粉的晶体结构和颗粒大小及形貌;用激发光谱和发射光谱以及荧光衰减曲线来表征荧光粉的荧光性能.结果表明:未煅烧时前躯体主要是六方晶相LaPO4·0.5H2O,煅烧温度在900℃时,所制备样品为单斜相LaPO4:Eu3+;SEM图像显示5 at.%Eu3+掺杂LaPO4呈椭球形,颗粒长约为500 nm,宽约为300 nm.最大发射波长和激发波长分别为592 nm和393 nm,发射光谱中592 nm和612 nm的发射峰对应的是Eu3+离子的5D0→7F1和5D0→7F2跃迁.其荧光寿命为3.32 ms.     

Effect of gadolinium incorporation on optical characteristics of YNbO_4：Eu~（3＋） phosphors for lamp applications

Eu3+-doped (Y,Gd)NbO4 phosphor was synthesized by solid-state reaction for possible application in cold cathode fluorescent lamps. A broad absorption band with peak maximum at 272 nm was observed which was due to the charge transfer between Eu3+ ions and neighboring oxygen anions. A deep red emission at the peak wavelength of 612 nm was observed which could be attributed to the 5D0→7F2 transition in Eu3+ ions. The highest luminance for Y1-x-yGdyNbO4:Eux3+ under 254 nm excitation was achieved at Eu3+ concentration of 18 mol.% (x=0.18) and Gd3+ concentration of 8.2 mol.% (y=0.082). The luminance of Y0.738Gd0.082NbO4:Eu3+0.18 was higher than that of a typical commercial phosphor Y2O3:Eu3+ and the CIE chromaticity coordinate was (0.6490, 0.3506), which was deeper than that of Y2O3:Eu3+. The particle size of the synthesized phosphors was controlled by the NaCl flux and particle size as high as 8 μm with uniform size distribution of particles was obtained.     

Synthesis of CaWO4：Eu3＋ phosphor powders via ethylene glycol route and its optical properties

Eu3+ doped CaWO4 with tetragonal system were prepared at comparatively low temperature (125 ?C) in ethylene glycol medium. The phosphor was further investigated by X-ray diffractometer (XRD), photoluminescence spectrophotometer (PL), Fourier transform infra red (FT-IR) spectroscopy and transmission electron microscopy (TEM). XRD analysis indicated a decrease in the unit cell volume of CaWO4 with increasing Eu3+ ion concentration. It indicated the homogeneous substitution of Ca2+ ions in CaWO4 by the Eu3+ ions. TEM images showed that the particle size ranged from 20 to 200 nm and it could extend the application of the nanoparticles. The photoluminescence study showed that the intensity of electric dipole transition (5D0→7F2) at 614 nm dominated over the magnetic dipole transition (5D0→7F1) at 592 nm. The optimum concentration of Eu3+ for the highest luminescence was found to be 20 at.%. The as prepared samples were found to be dis-persible in water and methanol.     

Synthesis and photoluminescence properties of novel red-emitting Ca14Mg2(SiO4)8:Eu3+/Sm3+ phosphors

Novel red-emitting Eu3+, Sm3+ singly doped and co-doped Ca14Mg2(SiO4)8 phosphors were prepared by conventional solid- state reaction. Powder X-ray diffraction patterns were employed to confirm phase pu...     

Photoluminescent properties of Sr2SiO4:Eu3+ and Sr2SiO4:Eu2+ phosphors prepared by solid-state reaction method

Eu2+ and (or) Eu3+ doped Sr2SiO4 phosphors particles were synthesized by a conventional solid-state reaction technique, and their structural and optical properties were investigated. The X-ray diffraction (XRD) results showed that the obtained phosphors were composed of orthorhombic α'-Sr2SiO4 and monoclinic β-Sr2SiO4 phase. When excited under 256 nm, Sr2SiO4:Eu3+ phosphors showed intense emission in the red region. Sr2SiO4:Eu3+ phosphors exhibited white emissions (x=0.30, y=0.40, TC=6500 K) ranging from 425 to 650 nm when it was excited by near-ultraviolet (near-UV) light, indicating that Sr2SiO4:Eu2+ was a good light-conversion phosphor candidate for near-UV chip.     

Photoluminescence enhancement of YAG：Ce~（3＋） phosphor prepared by co-precipitation-rheological phase method

YAG:Ce3+ phosphor was prepared by a novel co-precipitation-rheological phase method.The resulting YAG:Ce3+ phosphor was characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and photoluminescent emission spectra.By using acetic acid as solvent,YAG:Ce3+ powder with small particle size(≤2 μm) was obtained at a relatively lower sintering temperature of 1400 oC.With the content of acetic acid increasing,small particles dissolved and disappeared,but larger particles grew up and changed its shape from spherical to partially rectangular.Meanwhile,the emission intensity of the sample prepared by co-precipitation-rheological phase method was about 43% higher than that of the sample prepared by co-precipitation method.It was assumed that the significant improvement of luminescence was mainly because the rheological phase presented a better diffusion environment,and therefore,a better homogeneity of activators of Ce3+.     

Luminescent Properties of Green Phosphor Ca8Mg（SiO4 ）4 Cl2：EU^2＋ , DY^3＋ for LED Applications

The new phosphor calcium magnesium chlorosilicate, codoped with Eu^2＋ and Dy^3＋, was synthesized with the help of the high temperature solid state reaction in reducing atmosphere. The excitation and emission spectra were very similar to that of Ca8Mg（SiO4）4Cl2 ：Eu^2＋, and the Dy^3＋ concentration influenced the emission intensity of this phosphor. The intensity of Eu^2＋ and Dy^3＋ codoped CMSC was stronger than that of Eu^2＋ singly doped CMSC. The emission spectrum of the Dy^3＋ ion overlapped the absorption band of the Eu^2＋ ion, indicating that an energy transfer from Dy^3＋ to Eu^2＋ took place in CMSC：Eu^2＋, Dy^3＋ phosphor. The mechanism of the energy transfer from Dy^3＋ tO Eu^2＋, in this phosphor, might be resonant energy transfer.     

Blue-green BaAl_2O_4：Eu~（2＋）,Dy~（3＋） phosphors synthesized via combustion synthesis method assisted by microwave irradiation

Blue-green luminescent BaAl2O4:Eu2+,Dy3+ phosphor powders were synthesized via combustion synthesis method assisted by microwave irradiation in air. The phosphors were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and fluorescence spectrophotometer. The XRD results revealed that when the concentration of urea was over 3 times higher than theoretical quantities, a BaAl2O4 single hexagonal phase was obtained. The SEM results revealed that the surface of the BaAl2O4:Eu2+,Dy3+ pow...     

Preparation and characterization of flower-like SrAl2O4:Eu2+,Dy3+ phosphors by sol-gel process

A flower-like Eu2+ and Dy3+ co-doped SrAl2O4 long-lasting phosphorescent (LLP) phosphor was synthesized via the inorganic- salt-based sol-gel method.The crystal structure,morphology and optical properties of the composite were characterized.X-ray diffraction diffu-sion (XRD) data and DSC-TG curves of the phosphor revealed that the SrAl2O4 crystallites have been formed after the precursor was calcined at 900 °C and to be single-phase SrAl2O4 at 1100 °C.The SEM photographs indicated that the sample exhibited ...     

Energy transfer in Tb~（3＋）,Yb~（3＋） codoped Lu_2O_3 near-infrared downconversion nanophosphors

Tb3+ and Yb3+ codoped Lu2O3 nanophosphors were synthesized by the reverse-strike co-precipitation method. The obtained Lu2O3:Tb3+,Yb3+ nanophosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectra. The XRD results showed that all the prepared nanophosphors could be readily indexed to pure cubic phase of Lu2O3 and indicated good crystallinity. The Tb3+→Yb3+ energy transfer mechanisms in the UV-blue region in Lu2O3 nanophosphors were investigated. The experimental results showed that the strong visible emission around 543 nm from Tb3+ (5D4→7F5) and near-infrared (NIR) emission around 973 nm from Yb3+ (2F5/2→2F7/2) of Lu2O3:Tb3+,Yb3+ nanophosphors were observed under ultraviolet light excitation, respectively. Tb3+ could be effectively excited up to its 4f75d1 state and relaxed down to the 5D4 level, from which the energy was transferred cooperatively to two neighboring Yb3+. The Yb3+ concentration dependent luminescent properties and lifetimes of both the visible and NIR emissions were also studied. The lifetime of the visible emission decreased with the increase of Yb3+ concentration, verifying the efficient energy transfer from the Tb3+ to the Yb3+. Cooperative energy transfer (CET) from Tb3+ to Yb3+ was discussed as a possible mechanism for the near-infrared emission. When doped concentrations were 1 mol.% Tb3+ and 2 mol.% Yb3+, the intensity of NIR emission was the strongest.     

Photoluminescence Characteristics of Gd2Mo3O9 ： Eu Phosphor Particles by Solid State Reaction Method

Eu^3＋-doped Gd2Mo3O9 was prepared by solid-state reaction method using Na2CO3 as flux and characterized by powder X-ray diffractometry. According to X-ray diffraction, this material belonged to a tetragonal system with space group I41/α. The effects of flux content and sintering temperature on the luminescent properties were investigated with the emission and excitation spectra. The results showed that flux content and sintering temperature had effects on the luminescent properties, the optimized flux content and the best temperature was 3 % and 800 ℃ respectively. The excitation and emission spectra also showed that this phosphor could be effectively excited by C-T band （280 nm）, ultraviolet light 395 nm and blue light 465 nm. The wavelengths at 395 and 465 nm were nicely fitting in with the widely applied output wavelengths of ultraviolet or blue LED chips. Integrated emission intensity of Gd2Mo3O9 ： Eu was twice higher than that of Y2O2S ： Eu^3 ＋ under 395 nm excitation. The Eu^3＋ doped Gd2Mo309 phosphor may be a better candidate in solid-state lighting applications.