Single-machine makespan minimization scheduling with nonlinear shortening processing times

In this paper, we consider the single-machine makespan minimization scheduling problem with nonlinear shortening processing times. By the nonlinear shortening processing times, we mean that the processing times of jobs are non-increasing nonlinear functions of their starting times. The computational complexity of the general problem remains an open problem, but we show that even with the introduction of nonlinear shortening processing times to job processing times, some special cases remain polynomially solvable. We also show that an optimal schedule of the general makespan minimization problem is V-shaped with respect to job normal processing times. A heuristic algorithm which utilize the V-shaped property is proposed, and computational experiments show that it is effective and efficient in obtaining near-optimal solutions.     

Scheduling independent jobs on uniform parallel machines to minimize tardiness criteria

The problem of scheduling N jobs on M uniform parallel machines is studied. The objective is to minimize the mean tardiness or the weighted sum of tardiness with weights based on jobs, on periods or both. For the mean tardiness criteria in the preemptive case, this problem is NP-hard but good solutions can be calculated with a transportation problem algorithm. In the nonpreemptive case the problem is therefore NP-hard, except for the cases with equal job processing times or with job due dates equal to job processing times. No dominant heuristic is known in the general nonpreemptive case. The author has developed a heuristic to solve the nonpreemptive scheduling problem with unrelated job processing times. Initially, the algorithm calculates a basic solution. Next, it considers the interchanges of job subsets to equal processing time sum interchanging resources (i.e. a machine for a given period). This paper models the scheduling problem. It presents the heuristic and its result quality, solving 576 problems for 18 problem sizes. An application of school timetable scheduling illustrates the use of this heuristic.     

Resource optimal control in some single-machine scheduling problems

We consider a problem to schedule a set of jobs on a single machine under the constraint that the maximum job completion time does not exceed a given limit. Before a job is released for processing, it must undergo some preprocessing treatment which consumes resources. It is assumed that the release time of a job is a positive strictly decreasing continuous function of the amount of resources consumed. The objective is to minimize the total resource consumption. We show that ordering jobs in nonincreasing processing times yields an optimal solution. We then consider a bicriterion approach to the problem in which the maximum job completion time and the resource consumption are simultaneously minimized and present a polynomial time solution algorithm. Finally, we consider a related problem in which the job release times are given but the processing times are functions of the amount of resource consumed. We show that ordering jobs in nondecreasing release times gives an optimal solution and that the problem to minimize both the maximum completion time and resource consumption is polynomially solvable     

Makespan minimization flowshop with position dependent job processing times—computational complexity and solution algorithms

This paper considers flowshop scheduling problems where job processing times are described by position dependent functions, i.e., dependent on the number of processed jobs, that model learning or aging effects. We prove that the two-machine flowshop problem to minimize the maximum completion time (makespan) is NP-hard if job processing times are described by non-decreasing position dependent functions (aging effect) on at least one machine and strongly NP-hard if job processing times are varying on both machines. Furthermore, we construct fast NEH, tabu search with a fast neighborhood search and simulated annealing algorithms that solve the problem with processing times described by arbitrary position dependent functions that model both learning and aging effects. The efficiency of the proposed methods is numerically analyzed.     

Parallel machine earliness and tardiness scheduling with proportional weights

In this paper we study the problem of scheduling n jobs with a common due date and proportional early and tardy penalties on m identical parallel machines. We show that the problem is NP-hard and propose a dynamic programming algorithm to solve it. We also propose two heuristics to tackle the problem and analyze their worst-case error bounds.Scope and purposeScheduling problems to minimize the total weighted earliness and tardiness (WET) arise in Just-in-time manufacturing systems, where one of the objectives is to complete each job as close to its due date as possible. The earliness and tardiness weights of a job in WET tend to increase with the value of the job. Because processing time is often a good surrogate for the value of a job, it is reasonable to consider weights that are proportional to job processing times. In this paper we study the parallel identical machine WET problem with proportional weights. We propose both exact and approximation algorithms to tackle the problem.     

An unconstrained optimization problem is NP-hard given an oracle representation of its objective function: a technical note

The problem of unconstrained minimization of a piecewise linear function of one variable is shown to be NP-hard given an oracle representation of the function. This result can be applied to establish the NP-hardness of the scheduling problem with controllable job processing times given an oracle representation of the scheduling cost. The computational complexity of this scheduling problem has remained unknown for more than 20 years.Scope and purposeWe consider the problem of unconstrained optimization from the perspective of classifying its computational complexity, and show that it is NP-hard. This result enables us to establish the NP-hardness of the scheduling problem with controllable job processing times, whose computational complexity status has remained unknown for a long time.     

基于TSP方法求解等待时间受限的置换流水车间调度

等待时间受限的置换流水车间调度问题要求工件在连续两个机器间的等待时间满足上限值约束.对此,分析了工件序列中相邻工件的加工持续时间及其上下界关系,并且提出一种启发式方法.首先,建立旅行商间题（TSP）以生成初始调度;然后,采用扩展插入方法优化调度解.为了衡量算法性能,给出问题下界的计算方法和相关评价指标,并通过数据实验验证了该启发式和下界计算方法的可行性和有效性.     

Common due date assignment and scheduling with ready times

We consider the problem of scheduling a set of nonsimultaneously available jobs on one machine. Each job has a ready time only at or after which the job can be processed. All the jobs have a common due date, which needs to be determined. The problem is to determine a due date and a schedule so as to minimize a total penalty depending on the earliness, tardiness and due date. We show that this problem is strongly NP-hard and give an efficient algorithm that finds an optimal due date and schedule when either the job sequence is predetermined or all jobs have the same processing time. We also propose three approximation algorithms for the general and special cases together with their experimental analysis.

Scope and purpose

We consider the single machine due date assignment problem for scheduling jobs which are ready for processing at different times. The problem under consideration arises in production planning and scheduling concerning the setting of appropriate due dates for a number of customer orders arriving over time. Most of the earlier publications on this subject assumed that the jobs are ready for processing simultaneously. This assumption is too restrictive for real-life production systems where jobs arrive at different times. We show that the problem with unequal ready times is NP-hard and develop fast heuristic algorithms for it, and exact algorithms for two special cases.     

Single-machine scheduling with past-sequence-dependent delivery times and release times

This paper studies the problem of single-machine scheduling with past-sequence-dependent delivery times, which was introduced in Koulamas and Kyparisis (2010) [5]. We focus on the scenario with release times such that any job is available for processing on or after its specific release time. Both preemptive and non-preemptive models are considered, aiming at minimizing the total completion time. An optimal algorithm is presented for the preemptive model where any job may be preempted during processing on the machine and then resumed from where it was interrupted later on. For the non-preemptive model, we show that it is NP-hard and mainly develop an approximation algorithm.     

Two-machine flowshop scheduling problem with bounded processing times to minimize total completion time

We consider the two-machine flowshop scheduling problem where jobs have random processing times which are bounded within certain intervals. The objective is to minimize total completion time of all jobs. The decision of finding a solution for the problem has to be made based on the lower and upper bounds on job processing times since this is the only information available. The problem is NP-hard since the special case when the lower and upper bounds are equal, i.e., the deterministic case, is known to be NP-hard. Therefore, a reasonable approach is to come up with well performing heuristics. We propose eleven heuristics which utilize the lower and upper bounds on job processing times based on the Shortest Processing Time (SPT) rule. The proposed heuristics are compared through randomly generated data. The computational analysis has shown that the heuristics using the information on the bounds of job processing times on both machines perform much better than those using the information on one of the two machines. It has also shown that one of the proposed heuristics performs as the best for different distributions with an overall average percentage error of less than one.     

Production sequencing problem with reentrant work flows and sequence dependent setup times

This paper addresses a shop scheduling problem for the side frame press shop in a truck manufacturing company. In the problem, a set of n jobs to be scheduled on two machines. All the jobs require processing by the first machine more than once in their operation sequences with reentrant work flows. An unusual aspect of the problem is that the setup times required for a job in the first machine depend not on the immediately preceding job but on the job which is two steps prior to it. Redefining the job elements, the problem is formulated into a general two machine flow shop problem which has a set of job-element precedence constraints. The problem is solved with a modified dynamic programming with the objective of the minimum makespan. An optimal schedule is found utilizing the sequence dominance condition and a decision-delay scheme. A numerical example is presented for the illustration purpose.     

Single machine scheduling problems with resource dependent release times

We consider two single machine scheduling problems with resource dependent release times that can be controlled by a non-increasing convex resource consumption function. In the first problem, the objective is to minimize the total resource consumption with a constraint on the sum of job completion times. We show that a recognition version of the problem is NP-complete. In the second problem, the objective is to minimize the weighted total resource consumption and sum of job completion times with an initial release time greater than the total processing times. We provide some optimality conditions and show that the problem is polynomially solvable.     

Production capacity planning and scheduling in a no-wait environment with controllable processing times: An integrated modeling approach

This paper develops an integrated model between a production capacity planning and an operational scheduling decision making process in which a no-wait job shop (NWJS) scheduling problem is considered incorporating with controllable processing times. The duration of any operations are assumed to be controllable variables based on the amount of capacity allocated to them, whereas in classical NWJS it is assumed that the machine capacity and hence processing times are fixed and known in advance. The suggested problem which is entitled no-wait job shop crashing (NWJSC) problem is decomposed into the crashing, sequencing and timetabling subproblems. To tackle the addressed NWJSC problem, an improved hybrid timetabling procedure is suggested by employing the concept of both non-delay and enhanced algorithms which provides better solution than each one separately. Furthermore, an effective two-phase genetic algorithm approach is devised integrating with hybrid timetabling to deal with the crashing and sequencing components. The results obtained from experimental evaluations support the outstanding performance of the proposed approach.     

A hybrid metaheuristic for the prize-collecting single machine scheduling problem with sequence-dependent setup times

This paper investigates a single machine scheduling problem with strong industrial background, named the prize-collecting single machine scheduling problem with sequence-dependent setup times. In this problem, there are n candidate jobs for processing in a single machine, each job has a weight (or profit) and a processing time, and during processing a symmetric sequence-dependent setup time exists between two consecutive jobs. Since there is a maximum available time limitation of the machine, it is generally impossible to complete the processing of all the candidate jobs within this time limitation. The objective is to find a job processing sequence of maximal job weights (or profits) over a subset of all candidate jobs whose makespan does not exceed the given time limitation. This problem can be considered as an application of the orienteering problem (OP) in the field of discrete manufacturing. We formulate this problem as a mixed integer linear programming (MILP) model and propose a hybrid metaheuristic combining the structures of scatter search and variable neighborhood search. Computational results on a large number of randomly generated instances with different structures show that the proposed hybrid metaheuristic outperforms CPLEX and two metaheuristics proposed for the OP.     

Single-machine scheduling with truncated sum-of-processing-times-based learning effect including proportional delivery times

The single-machine scheduling problem with truncated sum-of-processing-times-based learning effect and past-sequence-dependent job delivery times is considered. Each job’s delivery time depends on its waiting time of processing. For some regular objective functions, it is proved that the problems can be solved by the smallest processing time first rule. For some special cases of the total weighted completion time and the maximum lateness objective functions, the thesis shows that the problems can be solved in polynomial time.     

Scheduling a Single Server in a Two-machine Flow Shop

We study the problem of scheduling a single server that processes n jobs in a two-machine flow shop environment. A machine dependent setup time is needed whenever the server switches from one machine to the other. The problem with a given job sequence is shown to be reducible to a single machine batching problem. This result enables several cases of the server scheduling problem to be solved in O(n log n) by known algorithms, namely, finding a schedule feasible with respect to a given set of deadlines, minimizing the maximum lateness and, if the job processing times are agreeable, minimizing the total completion time. Minimizing the total weighted completion time is shown to be NP-hard in the strong sense. Two pseudopolynomial dynamic programming algorithms are presented for minimizing the weighted number of late jobs. Minimizing the number of late jobs is proved to be NP-hard even if setup times are equal and there are two distinct due dates. This problem is solved in O(n ³) time when all job processing times on the first machine are equal, and it is solved in O(n ⁴) time when all processing times on the second machine are equal. Received November 20, 2001; revised October 18, 2002 Published online: January 16, 2003     

Approximation algorithms for minimizing the total weighted number of late jobs with late deliveries in two-level supply chains

We study a supply chain scheduling problem in which n jobs have to be scheduled on a single machine and delivered to m customers in batches. Each job has a due date, a processing time and a lateness penalty (weight). To save batch-delivery costs, several jobs for the same customer can be delivered together in a batch, including late jobs. The completion time of each job in the same batch coincides with the batch completion time. A batch setup time has to be added before processing the first job in each batch. The objective is to find a schedule which minimizes the sum of the weighted number of late jobs and the delivery costs. We present a pseudo-polynomial algorithm for a restricted case, where late jobs are delivered separately, and show that it becomes polynomial for the special cases when jobs have equal weights and equal delivery costs or equal processing times and equal setup times. We convert the algorithm into an FPTAS and prove that the solution produced by it is near-optimal for the original general problem by performing a parametric analysis of its performance ratio.     

Scheduling with multi-attribute setup times

In this paper we address a scheduling problem with multi-attribute setup times originated from the manufacturing plant of a company producing PVC sheets. In the considered scheduling problem, each job has a number of attributes and each attribute has one or more levels. Because there is at least one different level of attribute between two adjacent jobs, it is necessary to make a setup adjustment whenever there is a switch to a different job. The objective of the problem is to determine a processing sequence so as to minimize the total setup time on a single machine.     

Single machine total completion time minimization scheduling with a time-dependent learning effect and deteriorating jobs

In this article, we consider a single machine scheduling problem with a time-dependent learning effect and deteriorating jobs. By the effects of time-dependent learning and deterioration, we mean that the job processing time is defined by a function of its starting time and total normal processing time of jobs in front of it in the sequence. The objective is to determine an optimal schedule so as to minimize the total completion time. This problem remains open for the case of ?1?a?a denotes the learning index; we show that an optimal schedule of the problem is V-shaped with respect to job normal processing times. Three heuristic algorithms utilising the V-shaped property are proposed, and computational experiments show that the last heuristic algorithm performs effectively and efficiently in obtaining near-optimal solutions.     

Scheduling with due date assignment under special conditions on job processing

We review the results on scheduling with due date assignment under such conditions on job processing as given precedence constraints, maintenance activity or various scenarios of processing time changing. The due date assignment and scheduling problems arise in production planning when the management is faced with setting realistic due dates for a number of jobs. Most research on scheduling with due date assignment is focused on optimal sequencing of independent jobs. However, it is often found in practice that some products are manufactured in a certain order implied, for example, by technological, marketing or assembly requirements and this can be modeled by imposing precedence constraints on the set of jobs. In classical deterministic scheduling models, the processing conditions, including job processing times, are usually viewed as given constants. In many real-life situations, however, the processing conditions may vary over time, thereby affecting actual durations of jobs. In the models with controllable processing times, the scheduler can speed up job execution times by allocating some additional resources to the jobs. In the models with deterioration or learning, the actual processing time can depend either on the position or on the start time of a job in the schedule. In scheduling with deterioration, the later a job starts, the longer it takes to process, while in scheduling with learning, the actual processing time of a job gets shorter, provided that the job is scheduled later. We consider also scheduling models with optional maintenance activity. In manufacturing processing, production scheduling with preventive maintenance planning is one of the most significant methods in preventing the machinery from failure or wear.