A Rational Helmholtz Fundamental Equation of State for Difluoromethane with an Intermolecular Potential Background

A new fundamental thermodynamic equation of state for difluoromethane was developed by considering the intermolecular potential behavior for improving the reliability in the gaseous phase. Reliable second and third virial coefficients are introduced in accordance with the principle of a unified relation of the intermolecular potential energy and the fundamental equation of state. The fundamental equation of state is able to provide reliable thermodynamic properties even at low temperatures or in the region near saturation where precise and accurate experimental data are not available. The estimated uncertainties of calculated properties from the equation of state are 0.07% in density for the liquid phase, 0.1% in pressure for the gaseous phase, 0.35% in pressure for the supercritical region, 0.07% in vapor pressure, 0.2% in saturated-liquid density, 0.7% in saturated-vapor density, 0.01% in speed of sound for the gaseous phase, 0.7% in speed of sound for the liquid phase, and 0.6% in isochoric specific heat for the liquid phase. The equation is valid for temperatures from the triple point to 450 K and pressures up to 72 MPa.     

A Rigorous Thermodynamic Property Model for Fluid-Phase 1,1-Difluoroethane (R-152a)

A new thermodynamic property model for the Helmholtz free energy with rational third virial coefficients for fluid-phase 1,1-difluoroethane (R-152a) was developed. The model was validated by existing experimental data for temperatures from the triple point to 450 K and pressures up to 60 MPa. Reasonable behavior of the second and third virial coefficients was confirmed from intermolecular potential models. The estimated uncertainties are 0.1% in density for the gaseous and liquid phases, 0.4% in density for the supercritical region, 0.05% in speed of sound for the gaseous phase, 2% in speed of sound for the liquid phase, and 1% in specific heat capacities for the liquid phase. From the reasonable behavior of the ideal curves and the third virial coefficients, the model can be assumed reliable in representing the thermodynamic properties not only at states with available experimental data but also at states for which no experimental data are available.     

New Fundamental Equations of State with a Common Functional Form for 2,3,3,3-Tetrafluoropropene (R-1234yf) and <Emphasis Type="Italic">trans</Emphasis>-1,3,3,3-Tetrafluoropropene (R-1234ze(E))

New fundamental equations of state explicit in the Helmholtz energy with a common functional form are presented for 2,3,3,3-tetrafluoropropene (R-1234yf) and trans-1,3,3,3-tetrafluoropropene (R-1234ze(E)). The independent variables of the equations of state are the temperature and density. The equations of state are based on reliable experimental data for the vapor pressure, density, heat capacities, and speed of sound. The equation for R-1234yf covers temperatures between 240 K and 400 K for pressures up to 40 MPa with uncertainties of 0.1 % in liquid density, 0.3 % in vapor density, 2 % in liquid heat capacities, 0.05 % in the vapor-phase speed of sound, and 0.1 % in vapor pressure. The equation for R-1234ze(E) is valid for temperatures from 240 K to 420 K and for pressures up to 15 MPa with uncertainties of 0.1 % in liquid density, 0.2 % in vapor density, 3 % in liquid heat capacities, 0.05 % in the vapor-phase speed of sound, and 0.1 % in vapor pressure. Both equations exhibit reasonable behavior in extrapolated regions outside the range of the experimental data.     

Thermophysical Properties of Gaseous CF4 and C2F6 from Speed-of-Sound Measurements

A cylindrical resonator was employed to measure the sound speeds in gaseous CF₄ and C₂F₆. The CF₄ measurements span the temperature range 300 to 475 K, while the C₂F₆ measurements range from 210 to 475 K. For both gases, the pressure range was 0.1 MPa to the lesser of 1.5 MPa or 80% of the sample’s vapor pressure. Typically, the speeds of sound have a relative uncertainty of less than 0.01 % and the ideal-gas heat capacities derived from them have a relative uncertainty of less than 0.1%. The heat capacities agree with those determined from spectroscopic data. The sound speeds were fitted with the virial equation of state to obtain the temperature-dependent density virial coefficients. Two models for the virial coefficients were employed, one based on square-well potentials and the second based on a Kihara spherical-core potential. The resulting virial equations reproduce the sound-speed measurements to within 0.005 % and yield densities with relative uncertainties of 0.1% or less. The viscosity calculated from the Kihara potential is 2 to 11% less than the measured viscosity.     

A new equation of state for chlorodifluoromethane (R22) covering the entire fluid region from 116 K to 550 K at pressures up to 200 MPa

A new equation of state in the form of a fundamental equation explicit in the dimensionless Helmholtz free energy has been developed for chlorodifluoromethane (R 22). This equation, which contains 22 fitted coefficients, covers the entire fluid region from 116 K (triple point temperature) to 550 K at pressures up to 200 MPa. The mathematical form of the equation was determined with the help of a new method to optimize its structure. New pressure-density-temperature data in the liquid region and especially new vapour pressures and saturated liquid densities, as well as speed of sound data have been incorporated to extend the range of validity and to improve the accuracy of properties calculated with this equation beyond that of previous formulations. Independent equations are also included for the vapour pressure as well as for the saturated liquid and vapour densities. The uncertainty of the new wide-range equation of state can roughly be given as follows: ± 0.1% in density (with the exception of the critical region), ± 1% in heat capacity, ± 0.5% in speed of sound in the liquid and 0.1% in speed of sound in the gas phase. The new equation of state corresponds to the International Temperature Scale of 1990 (ITS-90).     

Equation of State for the Thermodynamic Properties of <Emphasis Type="Italic">trans</Emphasis>-1,3,3,3-Tetrafluoropropene [R-1234ze(E)]

An equation of state for the calculation of the thermodynamic properties of the hydrofluoroolefin refrigerant R-1234ze(E) is presented. The equation of state (EOS) is expressed in terms of the Helmholtz energy as a function of temperature and density. The formulation can be used for the calculation of all thermodynamic properties through the use of derivatives of the Helmholtz energy. Comparisons to experimental data are given to establish the uncertainty of the EOS. The equation of state is valid from the triple point (169 K) to 420 K, with pressures to 100 MPa. The uncertainty in density in the liquid and vapor phases is 0.1 % from 200 K to 420 K at all pressures. The uncertainty increases outside of this temperature region and in the critical region. In the gaseous phase, speeds of sound can be calculated with an uncertainty of 0.05 %. In the liquid phase, the uncertainty in speed of sound increases to 0.1 %. The estimated uncertainty for liquid heat capacities is 5 %. The uncertainty in vapor pressure is 0.1 %.     

Thermophysical Properties of Gaseous HBr and BCl3 from Speed-of-Sound Measurements

The speed of sound in gaseous hydrogen bromide (HBr) and boron trichloride (BCl₃) was measured using a highly precise acoustic resonance technique. The HBr speed-of-sound measurements span the temperature range 230 to 440 K and the pressure range from 0.05 to 1.5 MPa. The BCl₃ speed-of-sound measurements span the temperature range 290 to 460 K and the pressure range from 0.05 MPa to 0.40 MPa. The pressure range in each fluid was limited to 80% of the sample vapor pressure at each temperature. The speed-of-sound data have a relative standard uncertainty of 0.01%. The data were analyzed to obtain the ideal-gas heat capacities as a function of temperature with a relative standard uncertainty of 0.1%. The heat capacities agree with those calculated from spectroscopic data within their combined uncertainties. The speeds of sound were fitted with the virial equation of state to obtain the temperature-dependent density virial coefficients. Two virial coefficient models were employed, one based on the hard-core square-well intermolecular potential model and the second based on the hard-core Lennard–Jones intermolecular potential model. The resulting virial equations of state reproduced the speed-of-sound measurements to 0.01% and can be expected to calculate vapor densities with a relative standard uncertainty of 0.1%. Transport properties calculated from the hard-core Lennard–Jones potential model should have a relative standard uncertainty of 10% or less.     

A Thermodynamic Equation of State for Pentafluoroethane (R-125)

We developed a fundamental equation of state for pentafluoroethane (R-125, CHF₂CF₃) which is represented in terms of a non-dimensional Helmholtz free energy. The equation has been established on the basis of selected measurements of the pressure-density-temperature relation, speed of sound, heat capacities, and saturation properties. Linear and non-linear regression analysis was employed to determine the functional form and the numerical parameters. The equation represents all the thermodynamic properties of R-125 in the liquid and gaseous phases for temperatures between the triple point and 470 K, and pressures up to 35 MPa. The uncertainties are estimated to be about ±0.05% or 0.1 kPa for the vapor pressure, ± 0.05 % for the liquid and vapor densities, about ± 1 % for the isobaric and isochoric heat capacities in the liquid, and ± 0.5 % or ± 0.02 % for the speed of sound in the liquid and vapor, respectively.     

An equation of state for 1,1-difluroethane (HFC 152a)

An equation of state for 1,1-difluoroethane (HFC 152a, CH₃CHF₂) has been developed on the basis of reliable experimental data including PVT, liquid C_p, and saturated-liquid-density data measured by our group. It is a non-dimensionalized virial equation whose functional form is the same as that originally developed for 1,1,1,2-tetrafluoroethane (HFC 134a) in our group. The effective range is for pressures up to 15 MPa, temperatures from 230 to 450 K, and densities to 1000 kg m⁻³. The equation represents reliable PVT measurements within ± 1% in pressure for the superheated vapour and supercritical fluid, while within ±0.5% in density for the compressed liquid. In addition, it should be noted that the equation represents the other essential thermodynamic properties including vapour pressures, saturated-liquid/ vapour densities, isobaric/isochoric specific heats and sound velocity in both the liquid and gaseous phase of HFC 152a.     

Thermodynamic properties of HFC-32 (difluoromethane)

An 18-coefficient modified Benedict–Webb–Rubin equation of state of HFC-32 (difluoromethane) has been developed, based on the updated available PVT measurements, heat capacity measurements and speed of sound measurements. Correlations of vapor pressure and saturated liquid density are also presented. The correlations have been developed based on the reported experimental saturation properties data. This equation of state is effective both in the superheated gaseous phase and compressed liquid phase at pressures up to 70 MPa, densities to 1450 kg/m³, and temperatures from 150 to 475 K, respectively.     

Thermophysical Properties of Chlorine from Speed-of-Sound Measurements

The speed of sound was measured in gaseous chlorine using a highly precise acoustic resonance technique. The data span the temperature range 260 to 440 K and the pressure range 100 kPa to the lesser of 1500 kPa or 80% of the sample's vapor pressure. A small correction (0.003 to 0.06%) to the observed resonance frequencies was required to account for dispersion caused by the vibrational relaxation of chlorine. The speed-of-sound measurements have a relative standard uncertainty of 0.01%. The data were analyzed to obtain the ideal-gas heat capacity as a function of the temperature with a relative standard uncertainty of 0.1%. The reported values of C ^o _p are in agreement with those determined from spectroscopic data. The speed-of-sound data were fitted by virial equations of state to obtain the temperature dependent density virial coefficients. Two virial coefficient models were employed, one based on square-well intermolecular potentials and the second based on a hard-core Lennard–Jones intermolecular potential. The resulting virial equations reproduced the sound speed data to within 0.01% and may be used to calculate vapor densities with relative standard uncertainties of 0.1% or less.     

Thermodynamic Properties of 1,1,1,2,3,3,3-Heptafluoropropane

A vapor pressure equation has been developed for 1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea) based on previous measurements from 202 to 375K, from which the boiling point of HFC-227ea was determined. Based on the previous pressure–volume–temperature (PVT) measurements in the gaseous phase for HFC-227ea, virial coefficients, saturated vapor densities, and the enthalpy of vaporization for HFC-227ea were also determined. The vapor pressure equation and the virial equation of state for HFC-227ea were compared with the available data. Based on the previous measurements of speed of sound in the gaseous phase for HFC-227ea, the ideal-gas heat capacity at constant pressure and the second acoustic virial coefficient of HFC-227ea were calculated. A correlation of the second virial coefficient for HFC-227ea was obtained by a semiempirical method using the square-well potential for the intermolecular force and was compared with results based on PVT measurements. A van der Waals-type surface tension correlation for HFC-227ea was proposed, based on our previous experimental data by the differential capillary rise method from 243 to 340K.     

Experimental study of speed of sound in gaseous refrigerant R-507a

The speed of sound in gaseous refrigerants R-134a and R-507a is measured by the method of ultrasonic interferometer in a temperature interval from 293 to 373 K and pressure values from 0.01 to 0.5–2.9 MPa. The errors in measurement of the temperature, pressure, and speed of sound are ±20 mK, ±4 kPa, and ±(0.1–0.2)%, respectively. On the basis of the data obtained, the temperature dependence of the idealgas heat capacity is calculated. The results obtained are compared with calculation of speed of sound from the fundamental state equation for Helmholtz free energy.     

Determination of the thermodynamic properties of liquid ethanol from 193 to 263 K and up to 280 MPa from speed-of-sound measurements

The sound velocity in liquid ethanol has been measured up to 280 MPa and at temperatures between 193 and 263 K, using a phase-comparison, pulse-echo technique operating at 2 MHz. The density, isothermal compressibility, isobaric thermal expansion coefficient, and specific heat have been evaluated from the measured speed of sound starting from the density and specific heat data at 0.1 MPa and making use of a modified computational method originally developed by Davis and Gordon. The derived density data have been used to examine the validity of several empirical equations of state.     

An equation of state formulation of the thermodynamic properties of R134a (1,1,1,2-tetrafluoroethane)

New correlations for the thermodynamics properties of R134a are presented. A classical equation for the molar Helmholtz energy is used with temperature and density as the independent variables. The equation is accurate for both the liquid and vapour phases at pressures up to 70 Pa, and for a temperature range from the triple point to 450 K. Temperatures are given on the new International Temperature Scale of 1990 (ITS 90). The equation was developed by using experimental data for pressure-volume-temperature (PVT) properties, isochoric heat capacity, second virial coefficients, speed of sound and coexistence properties. Comparisons with experimental data and with two other equations of state are given. Ancillary equations representing the saturated liquid and vapour densities and the vapour pressure are also presented.     

Thermophysical Properties of Nitrogen Trifluoride, Ethylene Oxide, and Trimethyl Gallium from Speed-of-Sound Measurements

The speed of sound was measured in gaseous nitrogen trifluoride, ethylene oxide, and trimethyl gallium using a highly precise acoustic resonance technique. The measurements span the temperature range 200 to 425 K and reach pressures up to the lesser of 1500 kPa or 80% of the sample vapor pressure. The speed-of-sound measurements have a relative standard uncertainty of less than 0.01%. The data were analyzed to obtain the constant-pressure ideal-gas heat capacity C ⁰ _p as a function of temperature with a relative standard uncertainty of 0.1%. The values of C ⁰ _p are in agreement with those determined from spectro- scopic data. The speed-of-sound data were fitted by virial equations of state to obtain temperature-dependent density virial coefficients. Two virial coefficient models were employed, one based on square-well intermolecular potentials, and the second based on a hard-core Lennard-Jones intermolecular potential. The resulting virial equations reproduced the sound-speed data to within ±0.02%, and may be used to calculate vapor densities with relative standard uncertainties of 0.1% or less.     

Sound-velocity measurements for HFC-134a and HFC-152a with a spherical resonator

A spherical acoustic resonator was developed for measuring sound velocities in the gaseous phase and ideal-gas specific heats for new refrigerants. The radius of the spherical resonator, being about 5 cm, was determined by measuring sound velocities in gaseous argon at temperatures from 273 to 348 K and pressures up to 240 kPa. The measurements of 23 sound velocities in gaseous HFC-134a (1,1,1,2-tetrafluoroethane) at temperatures of 273 and 298 K and pressures from 10 to 250 kPa agree well with the measurements of Goodwin and Moldover. In addition, 92 sound velocities in gaseous HFC-152a (1,1-difluoroethane) with an accuracy of ±0.01% were measured at temperatures from 273 to 348 K and pressures up to 250 kPa. The ideal-gas specific heats as well as the second acoustic virial coefficients have been obtained for both these important alternative refrigerants. The second virial coefficients for HFC-152a derived from the present sound velocity measurements agree extremely well with the reported second virial coefficient values obtained with a Burnett apparatus.Paper dedicated to Professor Joseph Kestin.     

Thermodynamic Properties of Gaseous Nitrous Oxide and Nitric Oxide from Speed-of-Sound Measurements

The speed of sound was measured in gaseous nitrous oxide (N₂O) and nitric oxide (NO) using an acoustic resonance technique with a relative standard uncertainty of less than 0.01%. The measurements span the temperature range 200 to 460 K at pressures up to the lesser of 1.6 MPa or 80% of the vapor pressure. The data were analyzed to obtain the constant-pressure ideal-gas heat capacity _p ⁰ as a function of temperature with a relative standard uncertainty of 0.1%. For N₂O, the values of _p ⁰ agree within 0.1% with those determined from spectroscopic data. For NO, the values of _p ⁰ differ from spectroscopic results by as much as 1.5%, which is slightly more than the combined uncertainties. The speed-of-sound data were fitted by virial equations of state to obtain temperature-dependent density virial coefficients. Two virial coefficient models were employed, one based on square-well intermolecular potentials, and the second based on a hard-core Lennard-Jones intermolecular potential. The resulting virial equations reproduced nearly all the sound-speed data to within ±0.01% and may be used to calculate vapor densities with relative standard uncertainties of 0.1% or less.     

Thermophysical Properties of Gaseous Tungsten Hexafluoride from Speed-of-Sound Measurements

The speed of sound was measured in gaseous WF₆ using a highly precise acoustic resonance technique. The data span the temperature range from 290 to 420 K and the pressure range from 50 kPa to the lesser of 300 kPa or 80% of the sample's vapor pressure. At 360 K and higher temperatures, the data were corrected for a slow chemical reaction of the WF₆ within the apparatus. The speed-of-sound data have a relative standard uncertainty of 0.005%. The data were analyzed to obtain the ideal-gas heat capacity as a function of the temperature with a relative standard uncertainty of 0.1%. These heat capacities are in reasonable agreement with those determined from spectroscopic data. The speed-of-sound data were fitted by virial equations of state to obtain the temperature dependent density virial coefficients. Two virial coefficient models were employed, one based on square-well intermolecular potentials and the second based on a hard-core Lennard–Jones intermolecular potential. The resulting virial equations reproduced the sound-speed data to within ±0.005% and may be used to calculate vapor densities with relative standard uncertainties of 0.1% or less. The hard-core Lennard–Jones potential was used to estimate the viscosity and the thermal conductivity of dilute WF₆. The predicted viscosities agree with published data to within 5% and can be extrapolated reliably to higher temperatures.     

Vapor Pressure, Speed of Sound, and PVT-Properties of R-404a in the Vapor Phase

The density (300–363 K, up to 3.5 MPa) and speed of sound (293–373 K, 7.5–480 kPa) in gaseous R-404a have been studied by an isochoric piezometer method and an ultrasonic interferometer, respectively. The pressures of the saturated vapor along the dew line were measured from 298 to 330 K. The experimental uncertainties of the temperature, pressure, density, and speed-of-sound measurements were estimated to be within ±20 mK, ±1.5 kPa, ±0.15%, and ±(0.1–0.2)%, respectively. On the basis of the obtained data, the isobaric molar heat capacity of R-404a was calculated for the ideal-gas state. An eight-coefficient Benedict–Webb–Rubin equation of state has been developed for the gaseous phase of R-404a.