Crystallization of CaO–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass prepared by float process

CaO–MgO–Al₂O₃–SiO₂ (CMAS) glass was prepared by float process. The effects of TiO₂ and heat-treatment on properties and crystallization behaviors of float glasses were investigated by atomic force microscope, differential scanning calorimeter, X-ray diffraction, electron probe microanalyzer, field emission scanning electron microscope and viscosity test. The results showed that CMAS parent glasses produced by float process had a high surface flatness (Ra is less than 80.1 ± 0.1 nm) and low tin penetration (14 μm). When the concentration of TiO₂ increased from 3.51 to 5.01 wt %, the glass transition temperature was decreased, and the crystallization temperature was shifted from 913 to 887°C using differential scanning calorimeter. Field emission scanning electron microscope images showed that phase separation was discovered in CMAS parent glass (containing 3.51 wt % TiO₂) treated at 670°C. Diopside as a major crystalline phase was precipitated in CMAS glass-ceramics nucleated at 700°C for 30 min and followed by crystallization at 910°C for 30 min.     

Homogeneous and Heterogeneous Crystal Nucleation in Glass of the Li<Subscript>2</Subscript>O–SiO<Subscript>2</Subscript> System

The results of studying the kinetics of homogeneous (spontaneous) and heterogeneous (catalyzed) crystal nucleation in silicate glass is presented for glasses in the Li₂O–SiO₂ system. Nucleation is catalyzed via the photosensitive mechanism by adding poorly soluble impurities, shifting the glass composition towards the higher content of one of the components (autocatalysis), and by passing steam through the glass melt. The fundamental characteristics of crystal nucleation are obtained. The composition ranges with the maximum and minimum steady-state crystal nucleation rates are identified.     

Effect of temperature on the synthesis of nanoparticles with different morphology in the system MgO–SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O under hydrothermal conditions

Nanoparticles with different morphology have been obtained by hydrothermal method in the system MgO–SiO₂–TiO₂–H₂O. It has been found that in the investigated temperature–time interval the formation of nanotubes of hydrosilicate with the structure of chrysotile with a small amount of impurity phases predominantly takes place.     

Structural heterogeneity of SiO<Subscript>2</Subscript>–Na<Subscript>2</Subscript>O–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> glass

It is shown that the phase heterogeneity of SiO₂–Na₂O–Al₂O₃ glass has a liquation and crystallization nature, the balance between which is determined by the conditions of their synthesis. An increase in the aluminum oxide content decreases the number of liquation and crystallization sites, and also the linear sizes of the crystalline formations without eliminating the phase separation due to the liquation. The area of metastable immiscibility in the SiO₂–Na₂O–Al₂O₃ system, which is determined by scanning electron microscopy, is probably wider than the area detected by the optical methods.     

Effect of the relative volume of the conducting phase on the electroconductivity of glasses in the Na<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The effect of the relative volume of the conducting phase on the electroconductivity of phase-separated glasses in the ternary system Na₂O–B₂O₃–SiO₂, whose compositions are on the same glass transition isotherm at 550°C, is investigated. It is demonstrated that the electroconductivity of phase-separated sodium borosilicate glasses does not depend on the relative volume of the conducting phase (within the limits from 0.3 to 0.9) under the condition that its composition invariable.     

Migration processes in the glass forming melts of the Na<Subscript>2</Subscript>O–BaO–Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The specific conductivity and tracer of diffusion of sodium and barium ions have been determined and the values of the transport numbers and correlation factor for diffusion have been calculated in two melts of the Na₂O–BaO–Ga₂O₃–SiO₂ system.     

Synthesis of low-melting eutectic of the CaO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system in a solid phase

Results are provided for a physicochemical study of processes that occur during synthesis of eutectic composition of the CaO–B₂O₃–SiO₂ system in a solid phase, and the possibility of their activation by using starting calcium-containing components with different chemical and thermal prehistory. It is established that independent of the form of starting components, in all cases there is formation of a crystalline eutectic phase, and the sequence of physicochemical processes that occur is determined by the reaction capacity of the calcium compound introduced.     

Kinetics of Hydrolytic Polycondensation of Silicon Dioxide in the SrO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> Systems

The kinetics of polycondensation in solutions during the liquid-phase synthesis of ceramic material precursors based on a SrO–B₂O₃–SiO₂ system are studied by spectrophotometry. The ratio between the quantitative content of tetraethoxysilane and the reaction rate of the formation of polymer forms is proved.     

Preparation and Characterization of SiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> Core–Shell Microspheres as RP-HPLC Stationary Phase

Novel SiO₂/SiO₂ core–shell monodisperse silica spheres for high-performance liquid chromatography packing materials are prepared by the layer-by-layer self-assembly technique. The core–shell silica spheres consist of micrometer-sized porous silica spheres as the core and a thin mesoporous silica shell formed from multilayer nanometer-sized silica particles. In addition, a reversed-phase packing by bonding octadecyltrichlorosilane on SiO₂/SiO₂ particles through alkyl-modified method is prepared and characterized. The results show that the carbon content of the new reversed-phase stationary phase increases by approximately 45% compared with the uncoated octadecyl-bonded SiO₂ stationary phase. Eight kinds of tested aromatic compounds are well-separated on the packing and the peaks are symmetrical, which demonstrates that the packing acts as an excellent reversed-phase chromatographic stationary phase.     

Physicochemical Properties of Nanosized Powders of the LaPO<Subscript>4</Subscript>–DyPO<Subscript>4</Subscript>–H<Subscript>2</Subscript>O System

Nanosized La_1–xDy_xPO₄ · nH₂O powders are synthesized by the sol-gel method using direct and reverse precipitation. The formation of a continuous series of hexagonal solid solutions based on LaPO₄ · nH₂O is confirmed by the XRD and DSC/TG methods. A continuous series of monoclinic solid solutions based on LaPO4 is formed at temperatures higher than 600°C. A reflex corresponding to a tetragonal form of DyPO₄ is formed during the calcination of DyPO₄ powder at 850°C. Two types of solid solutions are observed at temperatures of 1000–1200°C, namely, monoclinic solutions based on LaPO₄ (to x ≈ 0.7) and tetragonal solutions based on DyPO₄ (0.90 ≤ x ≤ 1.0). The results are compared depending on the methods of nanopowder synthesis.     

Monte Carlo Design and Experiments on the Neutron Shielding Performances of B<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass System

Neutron shielding properties of (90 – x)B₂O₃–10ZnO–xBi₂O₃ glass systems (where x = 15, 20, 25 and 30 mol %) were investigated by Monte Carlo simulations (FLUKA and GEANT4) and experiments. Neutron mass removal cross sections, number of inelastic scattering, elastic scattering, and capture interactions were estimated by simulations. ²⁴¹Am/Be neutron source was used for the neutron equivalent dose rate measurements. As a result, produced glass samples have fine neutron shielding capacity.     

Vapor–Liquid Equilibrium of Binary Components of the BrCF<Subscript>2</Subscript>COOCH<Subscript>3</Subscript>–CF<Subscript>3</Subscript>COOH–BrCF<Subscript>2</Subscript>COOH–CF<Subscript>3</Subscript>COOCH<Subscript>3</Subscript> Quaternary System

Vapor–liquid equilibria of binary components of the BrCF₂COOCH₃–CF₃COOH–BrCF₂COOH–CF₃COOCH₃ quaternary system have been studied experimentally at constant pressure. The experiments have been carried out on a modified Sventoslavskii ebulliometer. Using the Aspen Plus software package, the appropriate models have been selected and the vapor–liquid equilibria for six binary systems have been simulated.     

Self-cleaning performance of sol–gel-derived TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> double-layer thin films

The self-cleaning properties of the TiO₂/SiO₂ double-layer films prepared by sol–gel method were investigated. Thin films were prepared by spin coating onto glass and then thermally treated at different temperatures, and characterized using X-ray diffraction, atomic force microscopy, field emission scanning electron microscopy, and UV–visible spectroscopy. The cross-sectional structure of the films was observed by FESEM. The surface roughness of the films was characterized by AFM. The root mean square surface roughness of the thin films was below 2 nm, which should enhance their optical transparency. The photo-induced hydrophilicity of the films was evaluated by water contact angle measurement in air. The photocatalytic activity of the films was studied by the photocatalytic degradation of methylene blue under UV light irradiations. The TiO₂/SiO₂ double-layer thin films are plausibly applicable to developing self-cleaning materials in various applications such as windows, solar panels, cement, and paints.