TiB<Subscript>2</Subscript> and TiC single crystals by plasma-arc remelting of SHS products

The growth of TiB₂ and TiC single crystals by plasma-arc remelting of SHS products was explored. The process was markedly improved by using special stabilization systems. The synthesized crystals exhibited a cellular structure and a strong dependence of the longitudinal distribution of impurity elements on a growth rate.     

Study on Mechanical and Tribological Characterization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiCp Reinforced Aluminum Metal Matrix Composite

In this investigation, an attempt has been made to hardness and wear rate of Al7075 hybrid metal matrix composite reinforced with the hard ceramics like alumina (2, 4, and 6 wt.% of Al2O3) and silicon carbide (3, 6, and 9 wt.% of SiC) is fabricated by using stir casting method. The samples were aging at temperature of 140 ^°C, 160 ^°C and 180 ^°C and monitored by hardness test. Taguchi’s L27 Orthogonal array was used for optimizing the process parameters. The obtained results indicated that hardness increased with increasing reinforcement. A wear test was performed using pin-on disk apparatus at room temperature for constant load of 30N, at a fixed sliding speed of 1.66 m/s and wear resistance increased as the weight percentage of reinforcement increased. Scanning electron microscope (SEM) studies were carried out to evaluate the worn surface. From the analysis of variance (ANOVA), Al₂O₃ is the significant factor that affects the hardness and wear loss of hybrid composites followed by SiCp and heat treatment. Confirmatory test was performed for the optimized parameters and these results were within the acceptable range when compared with the experimental results.     

Degradation kinetics of recalcitrant organic compounds in a decontamination process with UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> and UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> processes

In this study, degradation aspects and kinetics of organics in a decontamination process were considered in the degradation experiments of advanced oxidation processes (AOP),i.e., UV, UV/H₂O, and UV/H₂O,/TiO₂ systems. In the oxalic acid degradation with different H₂O₂ concentrations, it was found that oxalic acid was degraded with the first order reaction and the highest degradation rate was observed at 0.1 M of hydrogen peroxide. Degradation rate of oxalic acid was much higher than that of citric acid, irrespective of degradation methods, assuming that degradation aspects are related to chemical structures. Of methods, the TiO₂ mediated photocatalysis showed the highest rate constant for oxalic acid and citric acid degradation. It was clearly showed that advanced oxidation processes were effective means to degrade recalcitrant organic compounds existing in a decontamination process.     

Separation characteristics of tetrapropylammoniumbromide templating silica/alumina composite membrane in CO<Subscript>2</Subscript>/N<Subscript>2</Subscript>, CO<Subscript>2</Subscript>/H<Subscript>2</Subscript> and CH<Subscript>4</Subscript>/H<Subscript>2</Subscript> systems

Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support ( γ-Al₂O₃/ α-Al₂O₃ composite) by dip coating and then heat-treated at 550 °C. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/ γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20–40 °C conditions and 0.0–1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂> CO₂> N₂> CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂> CH₄> CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Unexpected Support Effect in Hydrotreating: Evidence of a Metallic Character for ReS<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and ReS<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> Catalysts

Abstract  

Rhenium sulfide based catalysts were prepared by the incipient wetness impregnation method over alumina and silica supports and evaluated for 4,6-dimethyldibenzothiophene hydrodesulfurization in a high-pressure stirred-tank reactor. The catalyst prepared over silica was about six times more active for hydrodesulfurization than the corresponding catalyst prepared over alumina and a NiMo/Al₂O₃ industrial reference catalyst. This surprising and positive SiO₂ support effect was explained by a metallic character of the supported sulfide, which was demonstrated using a kinetic approach of competitive hydrogenations and by XPS characterization.     

Investigation into the formation of phases with a Ba<Subscript>2</Subscript>Ti<Subscript>9</Subscript>O<Subscript>20</Subscript>-type structure in the BaO-TiO<Subscript>2</Subscript> and BaO-SrO-TiO<Subscript>2</Subscript> systems

The mechanism of formation of barium titanate Ba₂Ti₉O₂₀ in the BaO-TiO₂ and BaO-SrO-TiO₂ systems is investigated using initial mixtures prepared by three methods, namely, mechanical grinding of the initial reactants, coprecipitation from aqueous solutions of salts, and the sol-gel technique. It is established that, irrespective of the preparation procedure, the formation of Ba₂Ti₉O₂₀ proceeds through the formation of the intermediate phases BaTi₄O₉ and BaTi₅O₁₁. The nature of the intermediate phases is determined by the homogeneity and dispersion of the initial mixture, as well as by the stability of the intermediate phase. The most optimum conditions for the synthesis of Ba₂Ti₉O₂₀ are provided by the formation of BaTi₅O₁₁ as an intermediate phase upon heat treatment of the coprecipitation products in the nanocrystalline state. The metastability and structural defects in the BaTi₅O₁₁ intermediate phase encourage a decrease in the temperature of the final heat treatment by 100–150°C in the course of the preparation of Ba₂Ti₉O₂₀ single-phase ceramics.     

Structure of an atmospheric-pressure H<Subscript>2</Subscript>/O<Subscript>2</Subscript>/N<Subscript>2</Subscript> flame doped with iron pentacarbonyl

This paper presents the measurement and simulation data on the thermal and chemical structure of an atmospheric-pressure premixed H₂/O₂/N₂ flame doped with iron pentacarbonyl Fe(CO)₅. Soft ionization molecular beam mass spectrometry was used to measure concentration profiles of the combustion products of iron pentacarbonyl: Fe, FeO₂, FeOH, and Fe(OH)₂. A comparison of experimental and simulated concentration profiles showed that they are in satisfactory agreement for FeO₂ and Fe(OH)₂ and differ significantly for Fe and FeOH. Thus, the previously proposed kinetic model for the oxidation of iron pentacarbonyl was tested and it was shown that the mechanism needs further elaboration.     

Low-temperature anti-icing reagents in the Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-Mg(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-CO(NH<Subscript>2</Subscript>)<Subscript>2</Subscript>-H<Subscript>2</Subscript>O system and their properties

The polytherms of ice melting in sections of the Ca(NO₃)₂-Mg(NO₃)₂-CO(NH₂)₂-H₂O system with different component ratios were studied in the temperature interval from 0 to −40°C. A series of nitrate and nitrate-carbonate reagents that are promising for the creation of anti-acing reagents were found, which form eutectics with ice at temperatures from −25 to −39°C. Their properties, viz., melting properties with respect to ice and corrosiveness on metals and alloys, were determined. An effective corrosion inhibitor was selected.     

Electrical conductivity and structure of glasses in the Na<Subscript>2</Subscript>O-Na<Subscript>2</Subscript>S-P<Subscript>2</Subscript>O<Subscript>5</Subscript> and Na<Subscript>2</Subscript>S-P<Subscript>2</Subscript>S<Subscript>5</Subscript> systems

The glasses, in which oxygen was partially replaced with sulfur, have been synthesized in the Na₂O-P₂O₅-Na₂S system. The chemical and chromatographic analyses of the glasses synthesized have been performed. The temperature-concentration dependences of electrical conductivity of the glasses have been studied over a wide temperature range; the glass transition temperatures and the nature of charge carriers have been determined. The IR spectra and Raman spectra have been recorded at room temperature; the density and microhardness of the glasses and ultrasound velocity have been measured. A comparison of the electrical conductivities of the investigated glasses with those of the earlier studied glasses in the Na₂O-P₂O₅ system has shown their fair coincidence. The introduction of sodium sulfide into the Na₂O-P₂O₅ system is accompanied by an approximately threefold increase in electrical conductivity, although the concentrations of charge carriers (sodium ions) in the glasses amount to ∼17 and ∼26 mmol/cm³, respectively. The rise in electrical conductivity has been assumed to be caused by the increase in the degree of dissociation of polar structural chemical units including sulfide ions and by the higher mobility of sodium ions in the oxygen-free matrix.     

Interaction of O<Subscript>2</Subscript>, O<Subscript>3</Subscript>, and H<Subscript>2</Subscript>O<Subscript>2</Subscript> with an activated carbon

The results of the modification of AG-OV-1 activated carbon under various conditions (by atmospheric oxygen at elevated temperatures and by hydrogen peroxide or ozone) are given. The effect of the used modifier on changes in the porosity, surface state, and adsorption capacity of activated carbon is evaluated.     

Optical Properties of CeO<Subscript>2</Subscript> Doped SiO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>O-CaO-P<Subscript>2</Subscript>O<Subscript>5</Subscript> Glasses

Cerium oxide is one of the most important rare earth elements that is introduced into glass compositions due to its great effects on the optical properties. CeO₂ was introduced in Hench’s patented SiO₂-Na₂O-CaO-P₂O₅ glasses with different concentrations in order to study its effect on the optical behavior of this glass including optical band gap, transmittance, reflectance and refractive index and to give a complete view for the optical properties on cerium oxide-doped silicate glasses.     

Synthetic spinels of the system MgO-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Synthetic spinels of the system MgO-Cr₂O₃-Al₂O₃-Fe₂O₃ are considered and the desirability of organizing their production for the refractory industry is demonstrated. Translated from Novye Ogneupory, No. 6, pp. 32–35, June 2008.     

Solution-Combustion Synthesis of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as a Cathode Material for Lithium-Ion Batteries

A cathode material for lithium-ion batteries–LiNi_1/3Co_1/3Mn_1/3O₂–was prepared by solution combustion synthesis and characterized by XRD, SEM, and galvanostatic charge/discharge cycling. The sample calcined at 950°C for 10 h showed best charge/discharge performance. An initial discharge capacity (C) of 150.5 mA h g^–1 retained 95.7% of its value after 75 charge/discharge cycles at I_c = 14 mA g^–1 (0.2C rate), I_d = 70 mA g^–1 (0.5C rate).     

Li<Subscript>2</Subscript>Cu<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> + SiO<Subscript>2</Subscript>/Ti compositions for the catalytic afterburning of diesel soot

Two methods were used to obtain a catalytically active oxide coating on the surface of titanium for the catalytic afterburning of diesel soot: plasma electrochemical formation of an oxide film on the surface of titanium and extraction pyrolytic deposition of the Li₂Cu₂(MoO₄)₃ compound. The Li₂Cu₂(MoO₄)₃/TiO₂ + SiO₂/Ti compositions synthesized by the single-step extraction pyrolytic treatment of the oxidized surface of titanium ensured a high burning rate of soot of ∼300°C. The subsequent deposition of Li₂Cu₂(MoO₄)₃ lowers the activity of the catalyst, due probably to the growth of molybdate phase crystallites and the filling of open oxide film pores. Double lithium-copper molybdate is able to reduce appreciably the concentration of CO in the oxidation products of soot. The advantages of these methods are the possibility of forming high-cohesion durable coatings on surfaces of any complexity, the simplicity of their implementation, and high productivity and low cost. The obtained results can be recommended for use in developing methods for creating composite coatings on catalytic soot filters.     

CeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript>/ZSM-5 sorbents for high-temperature H<Subscript>2</Subscript>S removal

Performance of CeO₂-La₂O₃/ZSM-5 sorbents for sulfur removal was examined at temperature ranging from 500 oC to 700 oC. The sulfur capacity of 5Ce5La/ZSM-5 was much bigger than that of CeO₂/ZSM-5. H₂ had a negative impact on the sulfidation; however, CO had little influence on sulfur removal. The characterization results showed that CeO₂ and La₂O₃ were well dispersed on ZSM-5 because of the intimate admixing of La₂O₃ and CeO₂, the major sulfidation products were Ce₂O₂S and La₂O₂S, the XRD and SEM results revealed that ZSM-5 structure could remain intact during preparation and sulfidation process, the H₂-TPR showed that the reducibility of CeO₂ can be remarkably enhanced by addition of La.     

Properties of unsupported MoS<Subscript>2</Subscript> species produced in the preparation of MoS<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> using a sonochemical method

Unsupported MoS₂ particles, which were produced in the preparation of MoS₂/Al₂O₃ using a sonochemical method, were successfully separated from the prepared sample catalyst by adding oleylamine as an agent for dispersing the unsupported particles. The fraction of the unsupported MoS₂, which was estimated based on Mo balance, varied between 0.03 and 0.4, independent of the Mo loading levels investigated (6–54 wt% of Mo). The activity of the unsupported MoS₂ for the hydrodesulfurization of dibenzothiophene was nearly the same as that of the Al₂O₃-supported MoS₂, indicating that the activity of the prepared catalyst was not affected by the presence of the unsupported MoS₂ particles.