共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
阐述了静压导轨在球面车床刀架床鞍上应用的必要性。通过对静压导轨的设计,静压导轨的工作原理和特点,油膜形式及尺寸的设计,油腔的初始托举力计算等方面的研究,证明在球面车床回转工作台低速、重负载的条件下,采用静压技术,把摩擦副的两个接触面隔开,使摩擦副的静摩擦为纯液体摩擦,从而保证了机床的回转精度和加工精度,有效的延长了工作台上摩擦副的使用寿命。 相似文献
3.
装配调试是整台机床最后一道工序,通过分体转盘及静压轴瓦油膜间隙控制,对提高旋风刀架整体刚度及切削刚度至关重要. 相似文献
4.
5.
计入轴瓦变形的曲轴动应力和疲劳强度计算 总被引:1,自引:0,他引:1
采用动力学仿真软件ADAMS和有限元分析软件ANSYS,辅以手工编程相结合的方法,研究计入轴瓦变形时某四缸柴油机曲轴动应力分析和疲劳强度计算问题。解决计入轴瓦变形的曲轴—轴承系统动力学和摩擦学分析问题,得到动态油膜压力;采用ANSYS中的参数化编程语言APDL编写程序实现动态施加力边界条件,计算曲轴动应力;采用损伤积累理论计算曲轴疲劳强度。研究表明:计入轴瓦变形,主轴承最小油膜厚度大幅度下降,最大油膜压力大幅度上升,曲轴动力学响应和危险点的动应力也发生变化,曲轴疲劳寿命下降了15.6%。 相似文献
6.
重型数控滚齿机主轴均采用静压轴承结构,静压轴承轴瓦面需要精密加工,并且要保证极高的同轴度公差及表面光洁度,使用公司现有加工设备无法保证加工精度达到设计要求.为此设计了一套手动研磨工装,该工装利用高精度磨削研磨套、研磨剂与轴瓦面之间相对运动实现研磨,来完成轴瓦的精密加工,使用效果良好. 相似文献
7.
8.
1980年第三期《机床》杂志刊登了险峰机床厂李开瑜同志的“利用原主轴和轴瓦改静压轴承的探论”一文以后,有很多单位要求提供改制后的结构资料。现将我厂改制的情况扼要叙述如下,供同志们参考。 一、改制的好处 被改制的 MO8260曲轴磨床,原是短三瓦分体动压轴承。该机床用在生产线上,磨削精度不易达到要求,又因负荷过大还常出现抱轴现象,严重影响产品的质量和产量。 利用原主轴和轴瓦改制静压轴承后的好处: 1.在原轴承基础上提高了轴承油膜刚度,使主轴运转平稳,提高了磨削精度。 2.主轴在静压油膜中运转,与轴承不直接产生摩擦,克服了抱轴现… 相似文献
9.
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献
18.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
19.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献