Gas‐sorption properties of 6FDA–durene/1,4‐phenylenediamine (pPDA) and 6FDA–durene/1,3‐phenylenediamine (mPDA) copolyimides

We investigated the sorption isotherms of O₂, N₂, CH₄, and CO₂ gases in 6FDA–durene, 6FDA–1,4‐phenylenediamine (6FDA–pPDA), and 6FDA–1,3‐phenylenediamine (6FDA–mPDA) homopolymers and 6FDA–durene/pPDA and 6FDA–durene/mPDA copolyimides. The solubilities decrease in the order of the inherent condensabilities of the penetrant gases, namely, CO₂, CH₄, O₂, and N₂. The chemical structures of the polymer, as well as the chain packing, determine the sorption properties of these homopolymers and copolymers. The FDA–durene homopolymer has the highest solubility for all gases because of its high specific free volume and fractional free volume. The solubilities of the copolymers increase with an increasing 6FDA–durene content, while the solubility selectivities of the copolymers only vary slightly. The values of K_D (Henry's law constant) and C_H′ (Langmuir site capacity) of these copolyimides decrease with a decreasing 6FDA–durene content. To our surprise, contradictory to the previous known fact that the meta‐connected materials tend to have denser molecular packing than that of the para‐linked materials for homopolymers, the 6FDA–durene/mPDA 80/20 copolymer has higher gas solubilities than those of the 6FDA–durene/pPDA 80/20 copolymer. The random moiety sequence within the copolymer may be the main cause for the abnormal phenomenon. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2187–2193, 2003     

Effects of protein properties on adsorption and transport in polymer‐grafted ion exchangers: A multiscale modeling study

We use multiscale modeling to study how the molecular properties of a protein affect its adsorption and transport in ion exchange chromatography matrices with either open pores or charged polymers grafted into the pore structure. Coarse‐grained molecular dynamics (MD) simulations of lysozyme, bovine serum albumin, and immunoglobulin show that higher protein net charge leads to greater partitioning into the polymer‐grafted pore space but slower diffusion there due to favorable electrostatic interactions, while larger size decreases both pore space partitioning and diffusion due to steric effects of the polymers. Mass transfer simulations based on the MD results show that the polymer‐grafted systems can enhance the adsorption kinetics if pore space partitioning and diffusion are both sufficiently high. The simulations illustrate that to achieve fast adsorption kinetics, there is a tradeoff between favorable binding and rapid diffusion which largely depends on the charge and size of the protein. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4564–4575, 2017     

Microwave assisted polycondensation of polyimides by [4,4′‐(hexafluoroisopropylidene)diphthalic anhydride,pyromellitic dianhydride] and [2,4,6‐trimethyl‐m‐phenylenediamine]. Power,time, and solvent effect

The microwave assisted polycondensation of two polyimides were studied using pyromellitic dianhydride (PMDA), and 4,4′‐(hexafluoroisopropyliden)diphthalic anhydride (6FDA) as dianhydride monomers and 2,4,6‐trimethyl‐m‐phenylenediamine (TrmPD), as diamine monomer, under microwave irradiation in DMF and DMSO solvents. The structure and performance of polymers were characterized by Fourier Transform Infrared Spectroscopy (FTIR), viscosity, density, and Thermogravimetric Analysis (TGA). The results show that the polyimides can be obtained in a short reaction time with high intrinsic viscosity and high yield. The effect of the presence of a bridging group, ? C(CF₃)₂? , in the monomer structure is apparent in the permeability parameters of the macromolecules as polymer (6FDA‐TrmPD) always presents better results than polymer (PMDA‐TrmPD). Properties as density and T_g increases with the time exposition to the microwave irradiation. Polyimides obtained present good thermal properties because they began to lose weight in a range of 8–16% at high temperature as 450°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Influence of semi‐crystalline poly(ε‐caprolactone) and non‐crystalline polylactide blocks on the thermal properties of polydimethylsiloxane‐based block copolymers

Poly(A)‐block‐poly(B), poly(A)‐block‐poly(B)‐block‐poly(A) and B(A)₂ block copolymers were prepared through coordinated anionic ring‐opening polymerization of ε‐caprolactone (CL) and lactic acid (LA) using hydroxy‐terminated polydimethylsiloxane (PDMS) as initiator. A wide range of well‐defined combinations of PDMS‐block‐PCL and PDMS‐block‐PLA diblock copolymers, PCL‐block‐PDMS‐block‐PCL and PLA‐block‐PDMS‐block‐PLA triblock copolymers and star‐PDMS(PCL)₂ copolymers were thus obtained. The number‐average molar masses and the structure of the synthesized block copolymers were identified using various analytical techniques. The thermal properties of these copolymers were established using differential scanning calorimetry. Considering PDMS‐block‐PCL copolymers, the results demonstrate the complex effect of polymer architecture and PCL block length on the ability of the PDMS block to crystallize or not. In the case of diblock copolymers, crystallization of PCL blocks originated from stacking of adjacent chains inducing the extension of the PDMS block that can easily crystallize. In the case of star copolymers, the same tendency as in triblock copolymers is observed, showing a limited crystallization of PDMS when the length of the PCL block increases. In the case of PDMS‐block‐PLA copolymers, melting and crystallization transitions of the PLA block are never observed. Considering the diblock copolymers, PDMS sequences have the ability to crystallize. © 2019 Society of Chemical Industry     

Influence of flexible oligo(tetrafluoroethene) segment on the sorption and diffusion of carbon dioxide in poly(amide‐imide) membranes

Molecular simulations have been used to study the sorption and diffusion properties of carbon dioxide in a series of poly (amide‐imide) (PAI) membranes containing oligo(tetrafluoroethene) segment with various numbers (n = 0, 1, 2, 3, and 4) of tetrafluoroethene units. The solubility and self‐diffusion coefficients were computed by the Grand Canonical Monte Carlo (GCMC) method and molecular dynamics (MD) simulations respectively. It was found that increasing the fluorine content of the polymer membrane reduced the associated glass transition temperature (T_g) and led to an increase in diffusion coefficient of carbon dioxide. Results indicate that penetrant molecule's diffusion coefficient is strongly dependent on chain mobility. It is also noticed that the radial distribution functions (RDFs) are inconsistent with the d‐spacings of PAIs calculated form X‐ray data. This is also thought to be tied to the number of degrees of freedom of the chain. Finally, this study gives a useful insight into how PAIs with high fluorine content can be tailored with a high permeability to carbon dioxide. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Carbon dioxide sorption and diffusion in poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐CO‐3‐hydroxyvalerate)

CO₂ sorption and diffusion in poly(3‐hydroxybutyrate) and three poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymers were investigated gravimetrically at temperatures from 25° to 50°C and pressures up to 1 atm. The sorption behavior proved to be linear for all the copolymers studied. An additional set of measurements performed in a pressure decay apparatus at 35°C showed that the linearity could be extrapolated to pressures up to 25 atm. The sorption results obtained from both techniques were in good agreement. The poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) sorption kinetics were increasingly non‐Fickian at the higher temperatures, thus preventing the calculation of diffusion coefficients above 35°C. Interestingly, this was not the case for poly(3‐hydroxybutyrate), and diffusion coefficients and permeabilities could be calculated at all of the investigated temperatures. The 35°C permeabilities were fairly low, which is attributed to the high degree of crystallinity of this polyester family. Finally, the poly(3‐hydroxybutyrate) barrier properties against CO₂ are successfully compared with those of some selected common thermoplastics. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2391–2399, 1999     

Influence of the comonomers (styrene and methyl acrylate) on the rate of photocrosslinking of 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}‐ phenyl acrylate

[2,6‐Bis(4‐hydroxybenzylidene)cyclohexanone] (HBC) was prepared by reacting cyclohexanone and p‐hydroxybenzaldehyde in the presence of acid catalyst. Acrylated derivative of HBC, 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA), was prepared by reacting HBC with acryloyl chloride in the presence of triethylamine. Copolymers of HBA with styrene (S) and methyl acrylate (MA) of different feed compositions were carried out by solution polymerization technique by using benzoyl peroxide (BPO) under nitrogen atmosphere. All monomers and polymers were characterized by using IR and NMR techniques. Reactivity ratios of the monomers present in the polymer chain were evolved by using Finnman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (ex‐KT) methods. Average values of reactivity were achieved by the following three methods: r₁ (S) = 2.36 ± 0.45 and r₂ (HBA) = 0.8 ± 0.31 for poly(S‐co‐HBA); r₁ = 1.62 ± 0.06 (MA); and r₂ = 0.12 ± 0.07 (HBA) for poly(MA‐co‐HBA). The photocrosslinking property of the polymers was done by using UV absorption spectroscopic technique. The rate of photocrosslinking was enhanced compared to that of the homopolymers, when the HBA was copolymerized with S and MA. Thermal stability and molecular weights (M_w and M_n) were determined for the polymer samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2494–2503, 2004     

Fabrication of 6FDA‐durene polyimide asymmetric hollow fibers for gas separation

We have developed defect‐free asymmetric hexafluoro propane diandydride (6FDA) durene polyimide (6FDA‐durene) hollow fibers with a selectivity of 4.2 for O₂/N₂ and a permeance of 33.1 ×10^?6 cm³ (STP)/cm²‐s‐cmHg for O_2. These fibers were spun from a high viscosity in situ imidization dope consisting of 14.7% 6FDA‐durene in a NMP solvent and the inherent viscosities (IV) of this 6FDA‐durene polymer was 0.84 dL/g. Low IV dopes cannot produce defect‐free hollow fibers, indicating a 6FDA‐durene spinning dope with a viscosity in the region of chain entanglement seems to be essential to yield hollow fibers with minimum defects. The effects of spinning parameters such as shear rates within a spinneret and bore fluids as well as air gap on gas separation performance were investigated. Experimental data demonstrate that hollow fibers spun with NMP/H₂O as the bore liquid have higher permeances and selectivities than those spun with glycerol as the bore liquid because the former has a relatively looser inner skin structure than the latter. In addition, the selectivity of hollow fibers spun with NMP/H₂O as the bore liquid changes moderately with shear rate, while the selectivity of hollow fibers spun with glycerol are less sensitive to the change of shear rate. These distinct behaviors are mainly attributed to the different morphologies generated by different bore fluids. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2166–2173, 2001     

Synthesis and characterization of novel core‐shell magnetic nanogels based on 2‐acrylamido‐2‐methylpropane sulfonic acid in aqueous media

Ultrafine well‐dispersed Fe₃O₄ magnetic nanoparticles were directly prepared in aqueous solution using controlled coprecipitation method. The synthesis of Fe₃O₄/poly (2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS), Fe₃O₄/poly (acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AM‐co‐AMPS) and Fe₃O₄/poly (acrylic acid‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AA‐co‐AMPS) ‐core/shell nanogels are reported. The nanogels were prepared via crosslinking copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid, acrylamide and acrylic acid monomers in the presence of Fe₃O₄ nanoparticles, N,N′‐methylenebisacrylamide (MBA) as a crosslinker, N,N,N′,N′‐tetramethylethylenediamine (TEMED) and potassium peroxydisulfate (KPS) as redox initiator system. The results of FTIR and ¹H‐NMR spectra indicated that the compositions of the prepared nanogels are consistent with the designed structure. X‐ray powder diffraction (XRD) and transmission electron microscope (TEM) measurements were used to determine the size of both magnetite and stabilized polymer coated magnetite nanoparticles. The data showed that the mean particle size of synthesized magnetite (Fe₃O₄) nanoparticles was about 10 nm. The diameter of the stabilized polymer coated Fe₃O₄ nanogels ranged from 50 to 250 nm based on polymer type. TEM micrographs proved that nanogels possess the spherical morphology before and after swelling. These nanogels exhibited pH‐induced phase transition due to protonation of AMPS copolymer chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Molecular dynamics simulation of diffusion of O2 and CO2 in blends of amorphous poly(ethylene terephthalate) and related polyesters

The diffusion of small molecules through polymers is important in many areas of polymer science, such as gas barrier and separation membrane materials, polymeric foams, and in the processing and properties of polymers. Molecular dynamics simulation techniques have been applied to study the diffusion of oxygen and carbon dioxide as small molecule penetrants in models polyester blends of bulk amorphous poly(ethylene terephthalate) and related aromatic polyesters. A bulk amorphous configuration with periodic boundary conditions was generated into a unit cell whose dimensions were determined for each of the simulated polyester blends in the cell having the experimental density. The diffusion coefficients for O₂ and CO₂ were determined via NVE molecular dynamics simulations using the Dreiding 2.21 molecular mechanics force field over a range of temperatures (300, 500 and 600 K) using up to 40 ns simulation time. We have focussed on the influence of the temperature, polymer dynamics, density and free volume distribution on the diffusion properties. Correlation of diffusion coefficients with free volume distribution was found.     

4‐Hydroxy‐3‐methyl‐6‐(1‐methyl‐2‐oxoalkyl)pyran‐2‐one Synthesis by a Type III Polyketide Synthase from Rhodospirillum centenum

The purple photosynthetic bacterium Rhodospirillum centenum has a putative type III polyketide synthase gene (rpsA). Although rpsA was known to be transcribed during the formation of dormant cells, the reaction catalyzed by RpsA was unknown. Thus we examined the RpsA reaction in vitro, using various fatty acyl‐CoAs with even numbers of carbons as starter substrates. RpsA produced tetraketide pyranones as major compounds from one C_10–14 fatty acyl‐CoA unit, one malonyl‐CoA unit and two methylmalonyl‐CoA units. We identified these products as 4‐hydroxy‐3‐methyl‐6‐(1‐methyl‐2‐oxoalkyl)pyran‐2‐ones by NMR analysis. RpsA is the first bacterial type III PKS that prefers to incorporate two molecules of methylmalonyl‐CoA as the extender substrate. In addition, in vitro reactions with ¹³C‐labeled malonyl‐CoA revealed that RpsA produced tetraketide 6‐alkyl‐4‐hydroxy‐1,5‐dimethyl‐2‐oxocyclohexa‐3,5‐diene‐1‐carboxylic acids from C_14–20 fatty acyl‐CoAs. This class of compounds is likely synthesized through aldol condensation induced by methine proton abstraction. No type III polyketide synthase that catalyzes this reaction has been reported so far. These two unusual features of RpsA extend the catalytic functions of the type III polyketide synthase family.     

Novel poly(3,4‐dialkoxythiophene)s carrying 1,3,4‐oxadiazolyl‐biphenyl moieties: synthesis and nonlinear optical studies

Two new donor–acceptor types of polymer, poly{2‐(biphenyl‐4‐yl)‐5‐[3,4‐dialkoxy‐5‐(1,3,4‐oxadiazol‐2‐yl)thiophen‐2‐yl]‐1,3,4‐oxadiazole}s, were synthesized starting from 2,2′‐sulfanediyldiacetic acid and diethyl ethanedioate through multi‐step reactions. The polymerization was carried out via the polyhydrazide precursor route. The optical and charge‐transporting properties of the polymers were investigated using UV‐visible and fluorescence emission spectroscopic and cyclic voltammetric studies. The polymers showed bluish‐green fluorescence in solutions. The electrochemical band gaps of the polymers were determined to be 2.16 and 2.22 eV. The nonlinear optical properties of the polymers were investigated at 532 nm using the single‐beam Z‐scan technique with nanosecond laser pulses. The polymers showed strong optical limiting behaviour due to effective three‐photon absorption. The values of the three‐photon absorption coefficients for the polymers were found to be 9 × 10^?24 and 17 × 10^?24 m³ W^?2, which are comparable to those of good optical limiting materials. Copyright © 2010 Society of Chemical Industry     

The effect of crosslinking on the adsorption behavior of copper (II) onto poly(2‐hydroxy‐4‐acryloyloxybenzophenone)

The adsorption behavior of Cu(II) ions onto poly(2‐hydroxy‐4‐acryloyloxybenzophenone), polymer I, and onto poly(2‐hydroxy‐4‐acryloyloxybenzophenone) crosslinked with different amounts of divinylbenzene (DVB), polymers II, III, and IV, in aqueous solutions was investigated using batch adsorption experiments as a function of contact time, pH, and temperature. The amount of metal ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS) and the highest uptake was achieved at pH 7.0 and by using perchlorate as an ionic strength adjuster for polymers I, II, III, and IV. Results revealed that the adsorption capacity (q_e and Q_m) of Cu(II) ions decreases with increasing crosslinking due to the decrease of chelation sites. In addition, the rate of adsorption (k₂) of Cu(II) ions decreases with the increase of crosslinking because it becomes more difficult for Cu(II) ions to diffuse into the chelation sites. The isothermal behavior and the kinetics of adsorption of Cu(II) ions on these polymers with respect to the initial mass of the polymer and temperature were also investigated. The experimental data of the adsorption process was found to correlate well with the Langmuir isotherm model. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

New low bandgap conjugated polymer derived from 2, 7‐carbazole and 5, 6‐bis(octyloxy)‐4, 7‐di(thiophen‐2‐yl) benzothiadiazole: Synthesis and photovoltaic properties

To develop conjugated polymers with low bandgap, deep HOMO level, and good solubility, a new conjugated alternating copolymer PC‐DODTBT based on N‐9′‐heptadecanyl‐2,7‐carbazole and 5, 6‐bis(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzothiadiazole was synthesized by Suzuki cross‐coupling polymerization reaction. The polymer reveals excellent solubility and thermal stability with the decomposition temperature (5% weight loss) of 327°C. The HOMO level of PC‐DODTBT is ‐5.11 eV, indicating that the polymer has relatively deep HOMO level. The hole mobility of PC‐DODTBT as deduced from SCLC method was found to be 2.03 × 10^?4 cm²/Versus Polymer solar cells (PSCs) based on the blends of PC‐DODTBT and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) with a weight ratio of 1:2.5 were fabricated. Under AM 1.5 (AM, air mass), 100 mW/cm^?2 illumination, the devices were found to exhibit an open‐circuit voltage (V_oc) of 0.73 V, short‐circuit current density (J_sc) of 5.63 mA/cm^?2, and a power conversion efficiency (PCE) of 1.44%. This photovoltaic performance indicates that the copolymer is promising for polymer solar cells applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Relationship between the gas transport properties and the refractive index in high‐free‐volume fluorine‐containing polyimide membranes

The refractive index and gas transport properties (i.e., permeability, diffusivity, and solubility) in the 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)‐based polyimides were systematically investigated in terms of their polymer fractional free volumes (FFVs). The permeability and diffusion coefficients of the 6FDA‐based polyimide membranes to hydrogen, oxygen, nitrogen, methane, and carbon dioxide were correlated with their FFVs, which were estimated with van Krevelen's group contribution method. Linear correlations were also observed between the gas transport properties and the refractive index of these polyimides. We described FFV as a function of the refractive index based on the Lorentz–Lorenz equation. Linear correlations were observed between their refractive‐index‐based FFVs and the gas permeability, diffusivity, and solubility coefficients of these 6FDA‐based polyimides membranes. However, the FFVs of the 6FDA‐based polyimides calculated from refractive index were 1.16–1.37 times larger than their FFV values. This FFV was dependent on the free‐volume space and optical factors, such as the refractive index and molar refraction, which affected the electronic structure and the interactions between the gas molecules and the polymer segments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Basic characterization of polypropene‐block‐poly(methylene‐1,3‐cyclopentane‐co‐propene) synthesized from propene and 1,5‐hexadiene with modified stopped‐flow method

Block copolymerization of propene and 1,5‐hexadiene was carried out by a modified stopped‐flow polymerization method with an MgCl₂‐supported Ziegler catalyst. The resulting polymer, polypropene‐block‐poly(methylene‐1,3‐cyclopentane‐co‐propene) (PP‐b‐(PMCP‐co‐PP)), in which the crystallizable PP part was linked with the non‐crystallizable PMCP‐co‐PP part, was characterized by optical microscopy, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and tensile testing. The block copolymer having a chemical linkage between PP and PMCP‐co‐PP showed properties different from those of homopolymer, random copolymer and blend polymer. © 2001 Society of Chemical Industry     

2,2‐Bis[4‐(3,4‐dicarboxyphenoxy) phenyl]propane dianhydride (BPADA)‐based polyimide membranes for pervaporation dehydration of isopropanol: Characterization and comparison with 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA)‐based polyimide membranes

Polyimides were synthesized from one‐step polycondensation of BPADA and various diamines and were characterized with GPC, FTIR, NMR, DSC, and TGA. Polyimide membranes were prepared, and their hydrophilicity was estimated by contact angles and the free energies of interfacial interactions. Pervaporation properties were investigated for the dehydration of isopropanol, and comparisons were made between BPADA‐based membranes and 6FDA‐based membranes. The concentration coefficients of BPADA‐based membranes were calculated from the linear moiety contribution method based on the results from 6FDA‐based membranes, and they were compared to understand the effects of the feed concentration on pervaporation properties. The effects of temperature on permeation flux were studied with permeation activation energies for total flux and water flux in permeates. Moiety contribution factors for activation energies were used to correlate permeation flux and monomer moieties in the polymers, and reasonable results were obtained for BPADA. It is revealed that steric effects of monomers may change the diffusion properties, while functional groups are favorable to the changes in sorption properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Unexpected Reaction of 2,2′‐Bipyridyl‐cycloocta‐1,5‐diene‐nickel(0) with Acetone and Dioxygen

The reaction of (bipy)Ni(cod) ( 1 ) (bipy = 2,2′‐bipyridyl, cod = cycloocta‐1,5‐diene) with dioxygen and acetone at −20°C affords (bipy)Ni(C₉H₁₆O₃) ( 2 ) (C₉H₁₆O₃^2— = 2,4,6,6‐tetramethyl‐tetrahydropyran‐2,4‐diolate), which has been characterized by NMR, MS and an X‐ray crystal structure determination. Acidolysis of compound 2 with two equivalents of acetyl acetone (Hacac) yields (bipy)Ni(acac)₂ and C₉H₁₈O₃ ( 3 ) (2,4,6,6‐tetramethyl‐tetrahydropyran‐2,4‐diol), a cyclic trimer of acetone.     

Dehydrodimerization of Isobutene to 2,5‐Dimethyl‐1,5‐Hexadiene over Bismuth‐(III)‐Oxide and Various Additives

Bi₂O₃ and mixtures with different additives (Cr₂O₃, MoO₃, NH₄VO₃, SnO₂, and V₂O₅) have been chosen to study the oxidative dehydrodimerization of isobutene. The catalytic performances were investigated by variation of the residence time, isobutene to oxygen molar ratio, and pressure. The best results for 2,5‐dimethyl‐1,5‐hexadiene (DMH) yield (13 %) were achieved with Bi₂O₃ as the catalyst. The selectivity of DMH reaches values of over 90 %.