Ethylene/1‐octadecene copolymerization using [η5:η1‐C5Me4‐4‐R1‐6‐R‐C6H2O]TiCl2 catalysts

Copolymerization of ethylene with 1‐octadecene was studied using [η⁵:η¹‐C₅Me₄‐4‐R₁‐6‐R‐C₆H₂O]TiCl₂ [R₁ = ^tBu (1), H (2, 3, 4); R = ^tBu (1, 2), Me (3), Ph (4)] as catalysts in the presence of Al(i‐Bu)₃ and [Ph₃C][B(C₆F₅)₄]. The effect of the concentration of comonomer in the feed and Al/Ti molar ratio on the catalytic activity and molecular weight of the resultant copolymer were investigated. The substituents on the phenyl ring of the ligand affect considerably both the catalytic activity and comonomer incorporation. The 1 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system exhibits the highest catalytic activity and produces copolymers with the highest molecular weight, while the 2 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system gives copolymers with the highest comonomer incorporation under similar conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Organic/inorganic support for immobilizing (n‐BuCp)2ZrCl2/TiCl3 hybrid catalyst for use in the preparation of polymer blends

Reactor blends of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and low‐molecular‐weight polyethylene (LMWPE) were synthesized by two‐step polymerization using a hybrid catalyst. To prepare the hybrid catalyst, styrene acrylic copolymer (PSA) was first coated onto SiO₂/MgCl₂‐supported TiCl₃; then, (n‐BuCp)₂ZrCl₂ was immobilized onto the exterior PSA. UHMWPE was produced in the first polymerization stage with the presence of 1‐hexene and modified methylaluminoxane (MMAO), and the LMWPE was prepared with the presence of hydrogen and triethylaluminium in the second polymerization stage. The activity of the hybrid catalyst was considerable (6.5 × 10⁶ g PE (mol Zr)^?1 h^?1), and was maintained for longer than 8 h during the two‐step polymerization. The barrier property of PSA to the co‐catalyst was verified using ethylene polymerization experiments. The appearance of a lag phase in the kinetic curve during the first‐stage polymerization implied that the exterior catalyst ((n‐BuCp)₂ZrCl₂) could be activated prior to the interior catalyst (M‐1). Furthermore, the melting temperature, crystallinity, degree of branching, molecular weight and molecular‐weight distribution of polyethylene obtained at various polymerization times showed that the M‐1 catalyst began to be activated by MMAO after 40 min of the reaction. The activation of M‐1 catalyst led to a decrease in the molecular weight of UHMWPE. Finally, the thermal behaviors of polyethylene blends were investigated using differential scanning calorimetry. Copyright © 2011 Society of Chemical Industry     

Ethylene/α‐olefin copolymerization by nonbridged (cyclopentadienyl)(aryloxy)titanium(IV) dichloride/AliBu3/Ph3CB(C6F5)4 catalyst systems

A series of nonbridged (cyclopentadienyl) (aryloxy)titanium(IV) complexes of the type, (η⁵‐Cp′)(OAr)TiCl₂ [OAr = O‐2,4,6‐^tBu₃C₆H₂ and Cp′ = Me₅C₅ ( 1 ), Me₄PhC₅ ( 2 ), and 1,2‐Ph₂‐4‐MeC₅H₂ ( 3 )], were prepared and used for the copolymerization of ethylene with α‐olefins (e.g., 1‐hexene, 1‐octene, and 1‐octadecene) in presence of AlⁱBu₃ and Ph₃CB(C₆F₅)₄ (TIBA/B). The effect of the catalyst structure, comonomer, and reaction conditions on the catalytic activity, comonomer incorporation, and molecular weight of the produced copolymers was examined. The substituents on the cyclopentadienyl group of the ligand in 1 – 3 play an important role in the catalytic activity and comonomer incorporation. The 1 /TIBA/B catalyst system exhibits the highest catalytic activity, while the 3 /TIBA/B catalyst system yields copolymers with the highest comonomer incorporation under the same conditions. The reactivity ratio product values are smaller than those by ordinary metallocene type, which indicates that the copolymerization of ethylene with 1‐hexene, 1‐octene, and 1‐octadecene by the 1–3/ TIBA/B catalyst systems does not proceed in a random manner. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Ethylene/1‐hexene copolymerization with supported Ziegler–Natta catalysts prepared by immobilizing TiCl3(OAr) onto MgCl2

Five titanium complexes TiCl₃(OAr) (Ar = C₆H₅? , 2,6‐Me₂C₆H₃? , 2,6‐i‐Pr₂C₆H₃? , 2,6‐t‐Bu₂C₆H₃? , 4‐Me‐2,6‐t‐Bu₂C₆H₃? ) were immobilized, respectively, on MgCl₂ in semibatch reaction to form supported catalysts for olefin polymerization. Comparing with the catalysts prepared by immobilizing TiCl₃(OAr) onto MgCl₂ in batch reaction, the catalysts prepared by semibatch reaction have lower titanium content and higher ArO/Ti ratio. The aryloxy‐containing catalysts studied in this work showed higher ethylene/1‐hexene copolymerization activity and higher 1‐hexene incorporation rate than the blank catalyst when activated by triisobutylaluminum. Similar effects of the aryloxy ligand were observed when the copolymerization is conducted in the presence of hydrogen. Introducing aryloxy ligand in the catalysts either by semibatch or batch reaction caused similar effects of enhancing copolymerization activity and α‐olefin incorporation rate. Mechanism of the effects of aryloxy ligand has been discussed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41329.     

Silica‐supported (nBuCp)2ZrCl2: effect of catalyst active center distribution on ethylene–1‐hexene copolymerization

Metallocenes are a modern innovation in polyolefin catalysis research. Therefore, two supported metallocene catalysts—silica/MAO/(ⁿBuCp)₂ZrCl₂ (Catalyst 1) and silica/ⁿBuSnCl₃/MAO/(ⁿBuCp)₂ZrCl₂ (Catalyst 2), where MAO is methylaluminoxane—were synthesized, and subsequently used to prepare, without separate feeding of MAO, ethylene–1‐hexene Copolymer 1 and Copolymer 2, respectively. Fouling‐free copolymerization, catalyst kinetic stability and production of free‐flowing polymer particles (replicating the catalyst particle size distribution) confirmed the occurrence of heterogeneous catalysis. The catalyst active center distribution was modeled by deconvoluting the measured molecular weight distribution and copolymer composition distribution. Five different active center types were predicted for each catalyst, which was corroborated by successive self‐nucleation and annealing experiments, as well as by an extended X‐ray absorption fine structure spectroscopy report published in the literature. Hence, metallocenes impregnated particularly on an MAO‐pretreated support may be rightly envisioned to comprise an ensemble of isolated single sites that have varying coordination environments. This study shows how the active center distribution and the design of supported MAO anions affect copolymerization activity, polymerization mechanism and the resulting polymer microstructures. Catalyst 2 showed less copolymerization activity than Catalyst 1. Strong chain transfer and positive co‐monomer effect—both by 1‐hexene—were common. Each copolymer demonstrated vinyl, vinylidene and trans‐vinylene end groups, and compositional heterogeneity. All these findings were explained, as appropriate, considering the modeled active center distribution, MAO cage structure repeat units, proposed catalyst surface chemistry, segregation effects and the literature that concerns and supports this study. While doing so, new insights were obtained. Additionally, future research, along the direction of the present work, is recommended. © 2013 Society of Chemical Industry     

Long Chain Branched Polypropene Prepared by Means of Propene Copolymerization with 1,7‐Octadiene Using MAO‐Activated rac‐Me2Si(2‐Me‐4‐Phenyl‐Ind)2ZrCl2

Small amounts of 1,7‐octadiene (OD) comonomer, ranging from 0.5–5.0 mol‐%, were added during propene polymerization, catalyzed with methylalumoxane (MAO) activated rac‐Me₂Si(2‐Me‐4‐phenyl‐Ind)₂ZrCl₂ (MPI), in order to incorporate long chain branches and small amounts of high molecular mass polypropene (PP), thus improving melt processability of isotactic metallocene‐polypropene. As a function of the OD content the PP melting temperatures varied from 120 to 160°C. The presence of long chain branches was reflected by increased zero shear viscosities combined with pronounced shear thinning behavior in the case of propene/OD copolymers with molecular mass distribution of M̄_w/M̄_n < 4. Rheological measurements clearly revealed crosslinking occurring at high OD content. OD addition impaired catalyst activities. However, in the presence of trace amounts of ethene, catalyst activities increased significantly even in the presence of high OD content.     

(nBuCp)2ZrCl2‐catalyzed ethylene‐4M1P copolymerization: Copolymer backbone structure,melt behavior,and crystallization

The judicious design of methylaluminoxane (MAO) anions expands the scope for developing industrial metallocene catalysts. Therefore, the effects of MAO anion design on the backbone structure, melt behavior, and crystallization of ethylene?4‐methyl‐1‐pentene (E?4M1P) copolymer were investigated. Ethylene was homopolymerized, as well as copolymerized with 4M1P, using (1) MAO anion A (unsupported [MAOCl₂]^?) premixed with dehydroxylated silica, (ⁿBuCp)₂ZrCl₂, and Me₂SiCl₂; and (2) MAO anion B (Si?O?Me₂Si?[MAOCl₂]^?) supported with (ⁿBuCp)₂ZrCl₂ on Me₂SiCl₂‐functionalized silica. Unsupported Me₂SiCl₂, opposite to the supported analogue, acted as a co‐chain transfer agent with 4M1P. The modeling of polyethylene melting and crystallization kinetics, including critical crystallite stability, produced insightful results. This study especially illustrates how branched polyethylene can be prepared from ethylene alone using particularly one metallocene‐MAO ion pair, and how a compound, that functionalizes silica as well as terminates the chain, can synthesize ethylene?α‐olefin copolymers with novel structures. Hence, it unfolds prospective future research niches in polyethyne systhesis. © 2016 American Institute of Chemical Engineers AIChE J, 62: 1688–1706, 2016     

Copolymerization and characterization of ethene–1‐hexene copolymers prepared by using the (Me5Cp)2ZrCl2–MAO catalyst system

It is demonstrated that the catalyst system bis(pentamethylcyclopentadienyl)‐zirconium dichloride (Me₅Cp)₂ZrCl₂–methylaluminoxane (MAO) is able to produce random copolymers of ethene and 1‐hexene. The 1‐hexene incorporation in the copolymers is extremely small. Even in the case of a molar ratio of [ethene] to [1‐hexene] of 1/20 in the monomer feed, only 1.4 mol % 1‐hexene are incorporated according to ¹³C nuclear magnetic resonance (NMR) spectra. Nevertheless, the physical properties of the random copolymers change significantly in this small range of 1‐hexene incorporation, from a high‐density polyethene to a linear low‐density polyethene. Thus, the melting temperature, the degree of crystallinity, the density and lamella thickness, and the long period of the alternating crystalline and amorphous regions decrease with increasing 1‐hexene content in the random copolymers. Blends of high‐density polyethene prepared with the system (Me₅Cp)₂ZrCl₂–MAO and an elastomeric random copolymer of ethene and 1‐hexene are phase‐separated and show good compatibility, as demonstrated by transmission electron microscopy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 439–447, 1999     

Solubility of 1‐hexene in LLDPE synthesized by (2‐MeInd)2ZrCl2/MAO and by Mg(OEt)2/DIBP/TiCl4–TEA

The solubility of 1‐hexene was measured for linear low‐density polyethylenes (LLDPEs) produced over a heterogeneous Ziegler–Natta catalyst, Mg(OEt)₂/DIBP/TiCl₄–TEA (ZN), and over a homogeneous metallocene catalyst, (2‐MeInd)_zZrCl₂–MAO (MT). The 1‐hexene solubility in LLDPEs was well represented by the Flory–Huggins equation with a constant value of χ. ZN–LLDPEs dissolved a larger amount of 1‐hexene and thus showed a lower value of χ compared to MT–LLDPEs. The Flory–Huggins interaction parameter χ, or the solubility of 1‐hexene at a given temperature and pressure, was suggested as a sensitive measure for the composition distribution of LLDPEs. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1566–1571, 2002; DOI 10.1002/app.10418     

Copolymerization of ethylene/α‐olefins over (2‐MeInd)2ZrCl2/MAO and (2‐BzInd)2ZrCl2/MAO systems

Ethylene homopolymerization and ethylene/α‐olefin copolymerization were carried out using unbridged and 2‐alkyl substituted bis(indenyl)zirconium dichloride complexes such as (2‐MeInd)₂ZrCl₂ and (2‐BzInd)₂ZrCl₂. Various concentrations of 1‐hexene, 1‐dodecene, and 1‐octadecene were used in order to find the effect of chain length of α‐olefins on the copolymerization behavior. In ethylene homopolymerization, catalytic activity increased at higher polymerization temperature, and (2‐MeInd)₂ZrCl₂ showed higher activity than (2‐BzInd)₂ZrCl₂. The increase of catalytic activity with addition of comonomer (the synergistic effect) was not observed except in the case of ethylene/1‐hexene copolymerization at 40°C. The monomer reactivity ratios of ethylene increased with the decrease of polymerization temperature, while those of α‐olefin showed the reverse trend. The two catalysts showed similar copolymerization reactivity ratios. (2‐MeInd)₂ZrCl₂ produced the copolymer with higher M_w than (2‐BzInd)₂ZrCl₂. The melting temperature and the crystallinity decreased drastically with the increase of the α‐olefin content but T_m as a function of weight fraction of the α‐olefins showed similar decreasing behavior. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 928–937, 2000     

Ethylene polymerization over (nBuCp)2ZrCl2/MAO catalytic system supported on aluminosilicate SBA‐15 mesostructured materials

Heterogeneous metallocene catalysts were prepared by incipient wetness impregnation of AlSBA‐15 (Si/Al = 4.8, 15, 30, 60, and ∞) mesostructured materials with (nBuCp)₂ZrCl₂/MAO. For comparative purposes commercial silica and silica–alumina (Si/Al = 4.8) supports were also impregnated with the MAO/metallocene catalytic system. A combination of X‐ray powder diffraction, nitrogen adsorption–desorption isotherms at 77 K, transmission electron microscopy, ICP‐atomic emission spectroscopy, and UV–vis spectroscopic data, were used to characterize the supports and the heterogeneous catalysts. Ethylene polymerizations were carried out in a schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC, and SEM. Catalysts prepared with mesostructured SBA‐15 supports exhibited better catalytic performance than those supported on amorphous silica and silica–alumina. In general, higher ethylene polymerization activity was achieved if (nBuCp)₂ ZrCl₂/MAO catalytic system was heterogenized using supports with lower pore size in the range of the mesopores and lower Si/Al ratio. All catalysts produced high‐density polyethylene, with high crystallinity values and fibrous morphology when SBA‐15 mesostructured materials were used as supports. POLYM. ENG SCI., 2008. © 2008 Society of Plastics Engineers     

Copolymerization of propylene and norbornene with different metallocene catalysts

Propylene and norbornene were copolymerized by metallocene/MAO catalysts. The organometallic compounds rac-[Me₂C(Ind)₂]ZrCl₂ (1) and [Me₂C(Cp)(Flu)]ZrCl₂ (2), [Ph₂C(Cp)(2,7-di^tBuFlu)]ZrCl₂ (3) and [Me₂Si(3-^tBuCp)(N^tBu)]TiCl₂ (4) were used to catalyze polymerization series, in which the influence of the molar fraction of norbornene in the feed and of the polymerization temperature were investigated in detail. The obtained polymers, which exhibit a wide range of properties with glass transition temperatures above 200 °C, were characterized by ¹³C NMR spectroscopy, differential scanning calorimetry and gel permeation chromatography techniques.In this article, the emphasis is placed on the copolymerization behaviour of the catalysts and the properties of the obtained polymers, while other articles concentrate on NMR investigations of propylene/norbornene copolymers.     

Ethylene/propylene copolymerization over three conventional C2‐symmetric metallocene catalysts: Correlation between catalyst configuration and copolymer microstructure

This work reports on a correlation between catalyst configuration and copolymer microstructure for ethylene/propylene (E/P) copolymerization using three conventional C₂‐symmetric metallocene catalysts, namely, rac‐Et(Ind)₂ZrCl₂ (EBI), rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂ (SiPh), and rac‐CH₂(3‐tBu‐Ind)₂ZrCl₂ (MBu), with MAO as a common cocatalyst. Copolymerization reactions were conducted in toluene at three different temperatures with varied E/P ratios. Some typically obtained copolymers were characterized in detail using ¹³C‐NMR spectroscopy, by which triad distribution data were elaborated in a statistical method to determine the reactivity ratios (r_E and r_P) of the comonomers, which were also obtained by Fineman‐Rose estimation. The production of alternating‐like copolymers from EBI is attributed to the rapid interconversion between two conformation states of the active site, one of which favors the incorporation of propylene but the other one does not. Both SiPh and MBu are structurally more rigid and of larger dihedral angles than EBI; however, SiPh which owns open active site conformation tend to produce random copolymers at all studied temperatures, and for MBu, sterically hindered catalyst, block‐like copolymers were obtained. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of poly(1‐hexene)s end‐functionalized with phenols

Electrophilic alkylations of phenol/2,6‐dimethylphenol were performed with vinylidene‐terminated poly(1‐hexene)s using BF₃·OEt₂ catalyst. Vinylidene‐terminated poly(1‐hexene)s with M_n varying from 400 to 10000 were prepared by bulk polymerization of 1‐hexene at 50 to ?20 °C using Cp₂ZrCl₂/MAO catalysts. The phenol/2,6‐dimethylphenol‐terminated poly(1‐hexene)s was characterized by NMR (¹H, ¹³C), UV, IR and vapor phase osmometer (VPO). The isomer distribution (ortho, para and ortho/para) was determined by ¹³P NMR using a phosphitylating reagent, namely 2‐chloro‐1,3,2‐dioxaphospholane. The number‐average degree of functionality (F_n) >0.9 with >95% para selectivity could be achieved using low‐molecular‐weight oligomers of poly(1‐hexene)s. Copyright © 2005 Society of Chemical Industry     

Block copolymerizations of higher 1‐olefins with traditional polar monomers using metallocene‐type single component lanthanide initiators

Block copolymerizations of 1‐pentene or 1‐hexene with methyl methacrylate or ε‐caprolactone were explored using [Me₂Si(2‐SiMe₃‐4‐t‐BuMe₂SiC₅H₂)₂YH]₂ ( 1 ) or [Me₂Si(2‐SiMe₃‐4‐t‐BuC₅H₂)₂SmH]₂ ( 2 ) as an initiator in toluene or in neat mixtures by the successive additions of monomers in this order. Random copolymerizations of 1‐pentene with 1‐hexene, and random copolymerization of ethylene with 1‐hexene were also performed using 1 as an initiator. Copyright © 2004 Society of Chemical Industry     

Synthesis mechanisms of poly[styrene‐co‐(acrylic acid)]‐supported TiCl4 catalysts modified by magnesium compounds

Soluble poly[styrene‐co‐(acrylic acid)] (PSA) modified by magnesium compounds was used to support TiCl₄. For ethylene polymerization, four catalysts were synthesized, namely PSA/TiCl₄, PSA/MgCl₂/TiCl₄, PSA/(n‐Bu)MgCl/TiCl₄, and PSA/(n‐Bu)₂Mg/TiCl₄. The catalysts were characterized by a set of complementary techniques including X‐ray photoelectron spectroscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and element analysis. Synthesis mechanisms of polymer‐supported TiCl₄ catalysts were proposed according to their chemical environments and physical structures. The binding energy of Ti 2p in PSA/TiCl₄ was extremely low as TiCl₄ attracted excessive electrons from ? COOH groups. Furthermore, the chain structure of PSA was destroyed because of intensive reactions taking place in PSA/TiCl₄. With addition of (n‐Bu)MgCl or (n‐Bu)₂Mg, ? COOH became ? COOMg‐ which then reacted with TiCl₄ in synthesis of PSA/(n‐Bu)MgCl/TiCl₄ and PSA/(n‐Bu)₂Mg/TiCl₄. Although MgCl₂ coordinated with ? COOH first, TiCl₄ would substitute MgCl₂ to coordinate with ? COOH in PSA/MgCl₂/TiCl₄. Due to the different synthesis mechanisms, the four polymer‐supported catalysts correspondingly showed various particle morphologies. Furthermore, the polymer‐supported catalyst activity was enhanced by magnesium compounds in the following order: MgCl₂ > (n‐Bu)MgCl > (n‐Bu)₂Mg > no modifier. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

An improved phase‐inversion process for the preparation of silica/poly[styrene‐co‐(acrylic acid)] core–shell microspheres: synthesis and application in the field of polyolefin catalysis

Spherical and well‐dispersed silica/poly[styrene‐co‐(acrylic acid)] (SiO₂/PSA) core–shell particles have been synthesized using an improved phase‐inversion process. The resulting particles were successfully used as supports for polyolefin catalysts in the production of polyethylene with broad molecular weight distribution. Through the vapor phase, instead of the liquid phase in the traditional process, a non‐solvent was introduced into a mixture of micrometer‐sized SiO₂ and PSA solution. The core–shell structure of the resulting SiO₂/PSA microspheres was confirmed using optical microscopy, scanning electron microscopy, Fourier transfer infrared spectrometry, thermogravimetric analysis and measurement of nitrogen adsorption/desorption isotherms. In order to avoid agglomeration of particles and to obtain a good dispersion of the SiO₂/PSA core–shell microspheres, the non‐solvent was added slowly. As the concentration of PSA solution increased, the surface morphology of the core–shell particles became looser and more irregular. However, the surface area and the pore volume remained the same under varying PSA concentrations. The SiO₂/PSA core‐shell microspheres obtained were used as a catalyst carrier system in which the core supported (n‐BuCp)₂ZrCl₂ and the shell supported TiCl₄. Ethylene/1‐hexene copolymerization results indicated that the zirconocene and titanium‐based Ziegler–Natta catalysts were compatible in the hybrid catalyst, showing high activities. The resulting polyethylene had high molecular weight and broad molecular weight distribution. Copyright © 2010 Society of Chemical Industry     

ansa‐Zirconocenes with Bridge‐tethered Donors: Synthesis and Application as Catalysts in Solution Polymerization of Ethylene

Four new donor‐functionalized ansa‐zirconocenes have been synthesized from the XMeSiCp₂ZrCl₂ and X₂SiCp₂ZrCl₂ general formula (where X = (CH₂)₃OEt, C₈H₄SCH₂OMe, and CH₂(2‐MeO‐3‐Me‐C₆H₃)). In each of these metallocenes, alkoxy groups are linked by a three‐carbon chain to the silicon atom. To study the influence of the functionalized side chains, these metallocenes were activated with methylalumoxane (MAO) and utilized in solution polymerization of ethylene. The molecular weight distributions of the polymers formed show a bimodal shape which can be described as a superposition of two Schultz‐Flory distributions, synonymous to at least two different catalytic species. Unimodal polymers with M_w/M_n = 2 were formed with the Me₂SiCp₂ZrCl₂/MAO catalyst system, indicating that the unusual bimodal molecular weight distributions are due to the functionalized side chains tethered to the Si‐bridge.     

Study on Immobilized Metallocene and Single-Site Catalysts for the Preparation of Ultra-High Molecular Weight Polyethylene at Various Polymerization Conditions

Ultra-high molecular weight polyethylene (UHMWPE) possesses advantages over conventional polyolefins such as excellent mechanical properties. Recent progresses in transition-metal complexes have led to the discovery of highly active catalysts for the preparation of UHMWPE. In this study, Ti with bis(phenoxy-imine) ligand (FI catalyst) and Me₂Si(C₅Me₄)(N-tBu)TiCl₂ (CGC) were immobilized on silica and tested for the preparation of UHMWPE. Results revealed that soluble FI catalyst and CGC can produce polyethylene having relatively high molecular weight above 10⁶ g/mol, which also can be successfully immobilized on carriers for better adaptability to production processes.     

Styrene/substituted styrene copolymerization by Ph2Zn–metallocene–MAO systems: homo‐ and copolymerization of p‐methoxystyrene with styrene

BACKGROUND: The present work is part of a general study regarding the homo‐ and copolymerization of styrene using diphenylzinc–additive initiator systems, with the aim of improving the properties of commercial atactic polystyrene. The study is focused on syndiotactic polystyrene and/or copolymers of styrene (S) with substituted styrene, styrene derivatives or various α‐olefins. This research has been ongoing over the last 15 years. RESULTS: The reported experiments show that binary metallocene–methylaluminoxane (MAO) and ternary Ph₂Zn–metallocene–MAO, depending on the metallocene employed, are capable of inducing both homo‐ and copolymerization of styrene and p‐methoxystyrene (p‐MeOS). The results indicate that for a styrene/p‐MeOS mole ratio with p‐MeOS > 25% the product obtained has only a minor incorporation of styrene units. The efficiency of the metallocenes studied follows the order bis(n‐butylcyclopentadienyl)titanium dichloride ((n‐BuCp)₂TiCl₂) > indenyltitanium trichloride (IndTiCl₃) > Cp₂TiCl₂. CONCLUSION: Metallocenes (n‐BuCp)₂TiCl₂, Cp₂TiCl₂ and IndTiCl₃ in binary systems combined with MAO, as well as in ternary systems combined with Ph₂Zn and MAO, induce the homopolymerization of p‐MeOS and its copolymerization with styrene. The styrene/p‐MeOS copolymer obtained was enriched in p‐MeOS with respect to the initial feed, in agreement with the I+ inductive effect of the methoxy group in the para position of styrene. As already reported, the role of Ph₂Zn was nullified by its complexation with the p‐MeOS comonomer. Copyright © 2008 Society of Chemical Industry