Preparation and characterization of PS‐PMMA/ZnO nanocomposite films with novel properties of high transparency and UV‐shielding capacity

High transparent and UV‐shielding poly (styrene)‐co‐poly(methyl methacrylate) (PS‐PMMA)/zinc oxide (ZnO) optical nanocomposite films were prepared by solution mixing using methyl ethyl ketone (MEK) as a cosolvent. The films were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–vis) spectra, high‐resolution transmission electron microscopy (HR‐TEM), and atomic force microscope (AFM). Cross‐section HR‐TEM and AFM images showed that the ZnO nanoparticles were uniformly dispersed in the polymer matrix at the nanoscale level. The XRD and FTIR studies indicate that there is no chemical bond or interaction between PS‐PMMA and ZnO nanoparticles in the nanocomposite films. The UV–vis spectra in the wavelength range of 200–800 nm showed that nanocomposite films with ZnO particle contents from 1 to 20 wt % had strong absorption in UV spectrum region and the same transparency as pure PMMA‐PS film in the visible region. The optical properties of polymer are greatly improved by the incorporation of ZnO nanoparticles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Size‐dependent optical properties of transparent,spin‐coated polystyrene/ZnO nanocomposite films

Zinc oxide (ZnO) nanoparticles are synthesized using a simple chemical method at room temperature. A variation in molar concentration of the precursor, potassium hydroxide, from 0.25 to 0.01 mol L^?1 is accompanied by a decrease in the average size of the nanoparticles. These nanoparticles are used for the preparation of polystyrene/ZnO nanocomposite films using the spin‐coating technique. These films are found to be highly transparent throughout the visible region and absorb UV light in the region from 395 to190 nm, almost covering the near and middle UV ranges (400 to 200 nm). This observation highlights the possible prospects of these films in UV shielding applications. The wavelength corresponding to the onset of UV absorption is found to be blue shifted with a decrease in size of the ZnO particles in the composite films due to confinement effects. The photoluminescence spectra of the composite films also change as a function of particle size. The emissions at longer wavelength due to defects and impurity‐related states in ZnO are almost quenched as a result of surface modification by the polymer matrix. The observed band‐gap enlargement with a decrease in size of the ZnO particles in the composite films is significant for band‐gap engineering of nanoparticles for various applications. Copyright © 2011 Society of Chemical Industry     

Preparation and properties of poly(propylene carbonate) and nanosized ZnO composite films for packaging applications

A series of polypropylene carbonate (PPC)/ZnO nanocomposite films with different ZnO contents were prepared via a solution blending method. The morphological structures, thermal properties, oxygen permeability, water sorption, and antibacterial properties of the films were investigated as a function of ZnO concentration. While all of the composite films with less than 5 wt % ZnO exhibited good dispersion of ZnO in the PPC matrix, FTIR and SEM results revealed that solution blending did not lead to a strong interaction between PPC and unmodified ZnO. As such, poor dispersion was induced in the composite films with a high ZnO content. By incorporating inorganic ZnO filler nanoparticles, the diffusion coefficient, water uptake in equilibrium, and oxygen permeability decreased as the content of ZnO increased. The PPC/ZnO nanocomposite films also displayed a good inhibitory effect on the growth of bacteria in the antimicrobial analysis. The enhancement in the physical properties achieved by incorporating ZnO is advantageous in packaging applications, where antimicrobial and environmental‐friendly properties, as well as good water and oxygen barrier characteristics are required. Furthermore, UV light below ～ 350 nm can be efficiently absorbed by incorporating ZnO nanoparticles into a PPC matrix. ZnO nanoparticles can also improve the weatherability of a PPC film. In future research, the compatibility and dispersion of the PPC matrix polymer and the inorganic ZnO filler nanoparticles should be increased. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation and characterization of UV-cured polyurethane acrylate/ZnO nanocomposite films based on surface modified ZnO

A series of polyurethane acrylate (PUA)/ZnO nanocomposite films with different ZnO contents were prepared via a UV-curing system. To ensure good dispersion in the PUA matrix, ZnO nanoparticles were modified with a silane coupling agent and confirmed by FT-IR analysis. The morphological structures, thermal properties, mechanical properties and water transfer properties of the prepared films were investigated as a function of their ZnO concentration. WAXD and SEM analyses showed that the surface-modified ZnO nanoparticles were homogeneously dispersed in the PUA matrix and the molecular ordering increased with increasing ZnO content. Compared with neat PUA, the hardness and elastic modulus in films increased from 0.03 to 0.056 GPa and from 2.75 to 3.55 GPa, respectively. Additionally, the water uptake and WVTR in the PUA/ZnO nanocomposite films decreased as the ZnO content nanoparticles increased, which may come from enhanced molecular ordering and hydrophobicity in films. UV light below approximately 450 nm can be efficiently absorbed by incorporating ZnO nanoparticles into a PUA matrix, indicating that these composite films exhibit good weather ability and UV-shielding effects. The enhanced physical properties achieved by incorporating modified ZnO nanoparticles can be advantageous in various applications, whereas the thermal stability of the composite films should be increased.     

Investigation of the effect of ZnO nanoparticles on the thermomechanical and microbial properties of hyperbranched polyurethane‐urea hybrid composites

Hybrid coatings of hyperbranched polyurethane‐urea (HBPUU) containing ZnO nanoparticles were prepared by mixing the hyperbranched polyurethane with the nanoparticles. The films were stored at room temperature and laboratory humidity conditions for one week to yield completely cured hybrid films. The ZnO nanoparticles were found to be well dispersed in the polymer up to 3 wt%. The structure–property relationship of various HBPUU–ZnO hybrid coatings was analysed using a Fourier transform infrared peak deconvolution technique with a Gaussian curve‐fitting procedure, while their viscoelastic, thermomechanical and surface morphology were studied using X‐ray diffraction, dynamic mechanical thermal analysis, thermogravimetric analysis, a universal testing machine, scanning electron microscopy, atomic force microscopy and contact angle instruments. The thermal stability and mechanical properties of the hybrid composite films improved with increasing ZnO content, which was believed to be due to thermal insulation in the presence of nanoparticles. Water contact angle data suggested that the hydrophobic character of the hybrid composites increased with increasing nanoparticle concentration. The antimicrobial property of the HBPUU–ZnO hybrid coatings was studied using the disc diffusion method. HBPUU–ZnO hybrid coatings showed good antimicrobial properties compared to HBPUU. Copyright © 2012 Society of Chemical Industry     

Preparation and characterization of TiO2 and polymer nanocomposite films with high refractive index

Novel nanocomposite films of TiO₂ nanoparticles and hydrophobic polymers having polar groups, poly (bisphenol‐A and epichlorohydrin) or copolymer of styrene and maleic anhydride, with high refractive indices, high transparency, no color, solvent‐resistance, good thermal stability, and mechanical properties were prepared by incorporating surface‐modified TiO₂ nanoparticles into polymer matrices. In the process of preparing colloidal solution of TiO₂ nanoparticles, severe aggregation of particles can be reduced by surface modification using carboxylic acids and long‐chain alkyl amines. These TiO₂ nanoparticles dispersed in solvents were found not to aggregate after mixing with polymer solutions. Transparent colorless free‐standing films were obtained by drying a mixture of TiO₂ nanoparticles colloidal solution and polymer solutions in vacuum. Transmission electronic microscopic studies of the films suggest that the TiO₂ nanoparticles of 3–6 nm in diameter were dispersed in polymer matrices while maintaining their original size. Thermogravimetric analysis results indicate that the nanocomposite film has good thermal stability and the weight fraction of observed TiO₂ nanoparticles in the film is in good accordance with that of theoretical calculations. The refractive index of nanocomposite films of TiO₂ and poly(bisphenol‐A and epichlorohydrin) was in the range of 1.58–1.81 at 589 nm, which linearly increased with the content of TiO₂ nanoparticles from 0 to 80 wt %. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and characterization of poly(styrene butylacrylate) latex/nano‐ZnO nanocomposites

Poly(styrene butylacrylate) latex/nano‐ZnO composites were prepared by blending poly(styrene butylacrylate) latex with a water slurry of nano‐ZnO particles, and the effects of certain parameters, such as particle size, dispersant type, dispersing time and others, on the dispersibility, mechanical properties, ultraviolet (UV) shielding and near infrared (NIR) shielding were investigated with transmission electron microscopy (TEM), an Instron testing machine, dynamic mechanical analysis and ultraviolet‐visible‐near infrared (UV‐VIS‐NIR) spectrophotometry. TEM observation showed that dispersants with long chains are better than those with short chains at enhancing the dispersibility of nano‐ZnO particles in a matrix; extending dispersing time also improves the dispersibility of nano‐ZnO particles in a matrix. Instron tests showed that the nanocomposite polymers embedded with nano‐ZnO particles had much higher tensile strength than the corresponding composite polymers with micro‐ZnO particles. As the nano‐ZnO content increased, the temperature of glass transition (T_g) of the nanocomposite polymer embedded with 60 nm ZnO particles first increased then decreased, but 100 nm ZnO and micro‐ZnO particles seemed to have no influence on the T_g of the composite polymers. The better dispersibility of nano‐ZnO particles resulted in higher T_g values. Increasing nano‐ZnO content or dispersibility could enhance the UV shielding properties of the nanocomposite polymers, and 60 nm ZnO particles could more effectively shield UV rays than 100 nm ZnO particles. Micro‐ZnO particles basically had no effect on the UV absorbance of the composite polymers. A blue‐shift phenomenon was observed at 365 nm when nano‐ZnO particles were present in the nanocomposite polymers. NIR analysis indicated that as nano‐ZnO content increased, the NIR shielding of the nanocomposite polymers increased, but the NIR shielding properties seemed to be more influenced by particle size than by the nano‐effect. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1923–1931, 2003     

Preparation and characterizations of highly transparent UV-curable ZnO-acrylic nanocomposites

A sol–gel chemical route was adopted to prepare the zinc oxide (ZnO) nanoparticles as small as 4 nm. UV-curable ZnO-acrylic nanocomposites were then prepared by employing 3-(trimethoxysilyl)propyl methacrylate (TPMA) as the surface modification agent of ZnO particles. UV–vis analysis revealed a high optical transparency (>95%) in visible light region for nanocomposite thin films with ZnO contents up to 20 wt.%. The addition of ZnO nanoparticles also enhanced the dielectric constants of nanocomposites and the dielectric constants greater than 4 in frequencies ranging from 1 to 600 MHz was obtained in the samples containing 10 wt.% of ZnO nanoparticles. A comparison of experimental results and theoretical calculation indicated that the interfacial polarizations in between ZnO nanoparticles and polymer matrix may play an important role in the enhancement of dielectric properties of nanocomposites.     

Preparation and characterization of trilayer core–shell polysilsesquioxane–fluoroacrylate copolymer composite emulsion particles

Polysilsesquioxane–fluoroacrylate copolymer [poly(methyl methacrylate)–butyl acrylate–dodecafluoroheptyl methacrylate)] (FPSQ) composite latex particles with a trilayer core–shell morphology were manufactured by seeded emulsion polymerization, where PSQ latex particles bearing reactive methacryloxypropyl moieties were first produced by the hydrolysis‐condensation of (3‐methacryloxypropyl)trimethoxysilane, and then they were utilized as seeds, with methyl methacrylate, butyl acrylate, and dodecafluoroheptyl methacrylate as the inner and outer shell monomers. Fourier‐transform infrared spectra and ¹H‐NMR confirm the structure of the FPSQs. Transmission electron microscopy and scanning electron microscopy demonstrate that the obtained composite emulsion particles emerge with the trilayer core–shell pattern. Due to the anchoring of PSQ nanoparticles, the thermal stabilities of the FPSQ films are strengthened, and the resistance to heat is gradually improved along with the increase of the fluoroacrylate dose in the polymer matrix composite. X‐ray photoelectron spectroscopy, atomic force microscopy (AFM), and hydrophobicity investigations indicate that the fluorinated chain segments tend to concentrate at the film–air two‐phase interface. In addition, the AFM result denotes that importing more fluorine into the FPSQ hybrid material will engender greater phase separation and enrichment of the fluoroalkyl segments and a rougher morphology. Thus, the water contact angle of the FPSQ film can ultimately reach 121.4°. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44845.     

Morphological,structural, dielectric and electrical properties of PEO–ZnO nanodielectric films

The morphological, structural, dielectric and electrical properties of aqueous solution-cast prepared poly(ethylene oxide)–zinc oxide (PEO–ZnO) nanocomposite films have been investigated as a function of ZnO nanoparticle concentrations up to 5 wt%. Scanning electron microscopy (SEM) images of these films show that the morphology of pristine PEO aggregated spherulites changes into fluffy, voluminous and highly porous with dispersion of ZnO nanoparticles into the PEO matrix. X-ray diffraction (XRD) study confirms that the crystalline phase of PEO greatly reduces at 1 wt% ZnO, and it again increases gradually with further increase of ZnO concentration. The dielectric relaxation spectroscopy (DRS) over the frequency range 20 Hz–1 MHz reveals that the real part of complex dielectric permittivity at audio frequencies decreases non-linearly whereas it remains almost constant at radio frequencies for these polymeric nanocomposites. Dispersion of nanosize ZnO particles into the PEO matrix reduces the values of dielectric permittivity which also exhibits a correlation with the dispersivity of ZnO nanoparticles. The relaxation peaks observed in the dielectric loss tangent and electric modulus spectra reveal that the electrostatic interactions of nanoscale ZnO particles with the ethylene oxide functional dipolar group of PEO monomer units decrease the local chain segmental dynamics of the polymer. Real part of ac conductivity spectra of these films have been analyzed by power law fit over the audio and radio frequency regions, respectively, and the obtained dc conductivity values for these regions differ by more than two orders of magnitude. The temperature dependent relaxation time and dc conductivity values of the nanodielectric material obey the Arrhenius relation of activation energies and confirm a correlation between dc conductivity and PEO chain segmental motion which is exactly identical to the characteristics of solid polymer electrolytes. Results imply that these nanocomposite materials can serve as low permittivity flexible nanodielectric for radio frequency microelectronic devices and also as electrical insulator for audio frequency operating conventional devices in addition to their suitability in preparation of solid polymer electrolytes.     

Preparation and Characterization of Novel Polyimide/SiO2 Nano-hybrid Films by In Situ Polymerization

A silicon-based aromatic polyimide (PI) containing pendent aryl rings was synthesized by solution polycondensation of a silicon-containing diamine with 4,4′-(hexafluoroisopropylidene)diphthalic anhydride. Its nano-hybrids with different colloidal SiO₂ concentrations were synthesized by in situ polymerization. The reactions were carried out in presence of 3-aminopropyltriethoxysilane as a coupling agent. The inclusion of the coupling agent in the polymer chain and its co-condensation with SiO₂ nanoparticles afforded a silica network that was interconnected chemically with the PI matrix. The chemical structure of the hybrid materials was analyzed by Fourier transform infrared spectroscopy and energy dispersive X-ray spectroscopy. The morphology of the hybrid films and the surface roughness were characterized by scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The results indicated that nanometer-scale inorganic particles were homogeneously dispersed throughout the PI matrix with 50–70 nm size range. The best results and favorable miscibility between polymer and silica phases in the nano-hybrids were obtained when up to 40 wt% nanoparticles were introduced into the backbone of PI matrix.     

Microgel/clay nanohybrids as responsive scavenger systems

Microgel-clay composite particles were prepared by one-step surfactant-free precipitation polymerization. Laponite nanoparticles present in the reaction mixture become encapsulated during the microgel formation process. Microgel-clay composites based on poly(N-vinylcaprolactam-co-acetoacetoxyethyl methacrylate) containing different amount of incorporated clay nanoparticles were synthesized. The clay content was varied from 2 wt% to 18 wt%. The extremely high incorporation efficiency of the clay nanoparticles into microgels was detected. The size of the hybrid microgels was decreased from 700 nm to 100 nm by increase of the clay concentration in the reaction mixture. Obtained hybrid microgels exhibit negative surface charge and excellent colloidal stability. Microgel-clay composite particles display temperature-sensitive behaviour in water. The swelling degree of the hybrid microgels decreases with increase of the clay loading. Microgel-clay composite particles exhibit temperature-controlled uptake of the cationic dye, Methylene blue, and can be used as scavenger systems in aqueous media.     

Mechanical and UV absorption behavior of zinc oxide nanoparticles: reinforced poly(vinyl alcohol-<Emphasis Type="Italic">g</Emphasis>-acrylonitrile) nanocomposite films

In the present work PVA-g-PAN/ZnO nanocomposite films were prepared by free radical graft copolymerization of acrylonitrile on to PVA and subsequent in situ precipitation of ZnO nanoparticles into the polymer matrix. The films were characterized by FTIR, Raman spectroscopy, differential scanning calorimetry (DSC) and Scanning electron microscopy (SEM). The size of the crystallites and extents of crystallinity were ascertained by X-ray diffraction (XRD) analysis. The SEM with energy dispersive X-ray analysis (EDX) showed that the ZnO nanoparticles were uniformly dispersed within the host grafted copolymer matrix. The transmission electron microscopy (TEM) results clearly indicated that the size of nanoparticles varied in the range 10–30 nm. The UV-absorption properties showed that the films were capable of absorbing more than 95% of UV radiations. Photoluminescence (PL) measurements revealed the presence of defects in the synthesized nanocomposite films. The mechanical properties of the PVA-g-PAN/ZnO nanocomposites such as microhardness and tensile strength were also studied.     

Preparation and properties of poly[styrene‐co‐(butyl acrylate)‐co‐(acrylic acid)]/silica nanocomposite latex prepared using an acidic silica sol

BACKGROUND: Polyacrylate/silica nanocomposite latexes have been fabricated using blending methods with silica nanopowder, in situ polymerization with surface‐functionalized silica nanoparticles or sol–gel processes with silica precursors. But these approaches have the disadvantages of limited silica load, poor emulsion stability or poor film‐forming ability. RESULTS: In this work, poly[styrene‐co‐(butyl acrylate)‐co‐(acrylic acid)] [P(St‐BA‐AA)]/silica nanocomposite latexes and their dried films were prepared by adding an acidic silica sol to the emulsion polymerization stage. Morphological and rheological characterization shows that the silica nanoparticles are not encapsulated within polymer latex particles, but interact partially with polymer latex particles via hydrogen bonds between the silanol groups and the ? COOH groups at the surface of the polymer particles. The dried nanocomposite films have a better UV‐blocking ability than the pure polymer film, and retain their transparency even with a silica content up to 9.1 wt%. More interestingly, the hardness of the nanocomposite films increases markedly with increasing silica content, and the toughness of the films is not reduced at silica contents up to 33.3 wt%. An unexpected improvement of the solvent resistance of the nanocomposite films is also observed. CONCLUSION: Highly stable P(St‐BA‐AA)/silica nanocomposite latexes can be prepared with a wide range of silica content using an acidic silica sol. The dried nanocomposite films of these latexes exhibit simultaneous improvement of hardness and toughness even at high silica load, and enhanced solvent resistance, presumably resulting from hydrogen bond interactions between polymer chains and silica particles as well as silica aggregate/particle networks. Copyright © 2009 Society of Chemical Industry     

Synthesis and properties of ZnS/ polyimide nanocomposite films

A series of ZnS/polyimide (PI) nanocomposite films with different ZnS contents have been successfully fabricated by incorporating ZnS nanoparticles with a diameter of 2–5 nm into polyamic acid, followed by a stepwise thermal imidization process. X‐ray photoelectron spectroscopy results confirm the successful introduction of ZnS particles into PI matrix. Transmission electron microscopy images show that the ZnS nanoparticles were uniformly dispersed in the polymer matrix without aggregation. The incorporation of ZnS nanoparticles can improve the mechanical properties and the glass transition temperature of nanocomposites, while the thermal degradation temperature of nanocomposites decreases with increasing ZnS content. Copyright © 2006 Society of Chemical Industry Society of Chemical Industry     

Photocatalytic degradation and heat reflectance recovery of waterborne acrylic polymer/ZnO nanocomposite coating

This work aims to clarify the photocatalytic degradation mechanism and heat reflectance recovery performance of waterborne acrylic polymer/ZnO nanocomposite coating. To fabricate the nanocomposite coating, ZnO nanoparticles (nano-ZnO) were dispersed into acrylic polymer matrix at the various concentrations from 1 to 6% (by total weight of resin solids). The photocatalytic degradation of nanocomposite coating under ultraviolet (UV) light irradiation has been investigated by monitoring its weight loss and chemical/microstructural/morphological changes. As the topcoat layer, its heat reflectance recovery has been evaluated under UV/condensation exposure by using an artificial dirty mixture of 85 wt% nanoclay, 10 wt% silica particles (1–5 μm), 1 wt% carbon black, and 2 wt% engine oil. After 108-cycle UV/condensation exposure, infrared spectra and weight loss analysis indicated that the maximal degradation for nanocomposite coating is observed at 1 wt% nano-ZnO. On the other hand, after 96 hr of UV light exposure, the nanocomposite coating with1 wt% nano-ZnO could restore effectively the reflective index of solar-heat reflectance coating (from 58.45 to 80.78%). Finally, the photodegradation mechanism of this waterborne acrylic polymer coating has been proposed as the UV-induced formation of CC CO conjugated double bonds. As a result, its self-cleaning phenomenon can be achieved as the recovery of heat reflectance.     

Modification of the wettability of polymer surfaces using nanoparticles

The effects of nanoparticles, embedded into the matrices of polymer films, on the wettabilities of the surfaces of the composite films are investigated following a two-fold procedure. First, five particles such as silica (of two sizes), tin oxide, alumina and zinc oxide ranged from 7 to 100 nm are mixed with a poly(methyl siloxane). Second, silica nanoparticles (7 nm) are embedded in five different polymers such as poly(methyl methacrylate), polystyrene and three poly (alkyl siloxane) products. Nanocomposite films are produced by adding nanoparticles in the polymer solutions which are then sprayed on silicon substrates.     

Synthesis and characterization of nanosized polypyrrole–polystyrene composite particles

Nanosized polypyrrole–polystyrene (PPy–PS) composite particles were synthesized by the polymerization of pyrrole on PS nanoparticles in the presence of FeCl₃. The PS nanoparticles were prepared from microemulsion polymerizations using the cationic nonpolymerizable surfactant cetyltrimethylammonium bromide (CTAB), the nonionic polymerizable surfactant ω‐methoxy[poly(ethylene oxide)₄₀]undecyl α‐methacrylate (PEO–R–MA‐40), or the cationic polymerizable surfactant ω‐acryloyloxyundecyltrimethylammonium bromide (AUTMAB). For the latexes stabilized by CTAB, the resulting PPy–PS composite particles exhibited relatively poor colloidal stability and the pressed pellets exhibited relatively low electrical conductivities (～10^?7–10^?3 S cm^?1). However, for the latexes stabilized by polymerizable surfactants, the resulting PPy–PS composite particles exhibited relatively good colloidal stability and relatively high conductivities (～10^?5–10^?1 S cm^?1). The effect of polymerizable surfactants on the colloidal stability of composite particles and the conducting mechanism of the composites are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1360–1367, 2004     

Effect of neodymium‐doped titanium dioxide nanoparticles on the structural,mechanical, and electrical properties of poly(butyl methacrylate) nanocomposites

Nanocomposites based on neodymium‐doped titanium dioxide (Nd‐TiO₂)/poly(n‐butyl methacrylate) (PBMA) have been prepared by an in situ polymerization of butyl methacrylate monomer with varying concentrations of Nd‐TiO₂ nanoparticles. The resulting nanocomposites have been analyzed by ultraviolet (UV)–Visible spectroscopy, Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and impedance analyzer (TGA). The results of UV and FTIR spectroscopy have indicated the interaction of nanoparticles with the PBMA matrix. Spherically shaped nanoparticles with an average size of 10–25 nm have been revealed in the TEM and their homogeneous dispersion, and interaction of polymer matrix has been confirmed by SEM and XRD studies. The thermal stability and glass transition temperature of the composites were significantly enhanced by the addition of nanoparticles. The AC conductivity and dielectric properties of nanocomposites have been found to be higher than pure PBMA, and the maximum electrical properties have been observed for 7 wt% composite. The reinforcing nature of the nanoparticles in PBMA has been reflected in the improvement in tensile strength measurements. The result indicated that the tensile strength of nanocomposites have greatly enhanced by the addition of Nd‐TiO₂ nanoparticles whereas the elongation at break decreases with the loading of nanofillers. To understand the mechanism of reinforcement, tensile strength values have been correlated with various theoretical modeling. The research has been found to be promising in the development of novel materials with enhanced tensile strength, dielectric constant, and thermal properties, which may find potential applications in energy storage and nanoelectronic devices. J. VINYL ADDIT. TECHNOL., 25:9–18, 2019. © 2018 Society of Plastics Engineers     

Synthesis of silica hybrid nanoparticles modified with photofunctional polymers and construction of colloidal crystals

Photofunctional polymer as silane coupling agent (PFD) was prepared by free radical copolymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC) and methyl methacrylate (MMA) in the presence of (3‐mercaptopropyl)trimethoxysilane (MPMS) as chain transfer agent. Next, silane (SiO₂; the average diameter D_n = 192 nm) nanoparticles was surface‐modified with PFD and 3‐(trimethoxysilyl)propyl methacrylate (γ‐MPS) by covalent bond formed between silanol groups and silane coupling agents. The PFD and γ‐MPS functionalizations changed the silica surface into hydrophobic nature and provided grafting initiation sites and methacrylate terminal groups respectively. We performed the construction of hybrid nanocomposites by using these modified SiO₂ nanoparticles. It was found from electron microscopy observations that SiO₂ particles were packed into repeating cubic arrangements in a poly(methyl methacrylate) (PMMA) matrix such as colloidal crystals. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009