Metal‐ion‐retention properties of the poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine) resin

The water‐insoluble resin poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine), through a radical polymerization solution, was synthesized with ammonium persulfate as an initiator and N,N‐methylene bisacrylamide as a crosslinking reagent. The metal‐ion‐retention properties were studied by batch and column equilibrium procedures for the following metal ions: Hg(II), Cu(II), Cd(II), Zn(II), Pb(II), and Cr(III). These properties were investigated under competitive and noncompetitive conditions. The effects of the pH, maximum retention capacity, and regeneration capacity were studied. The resin showed a high retention ability for Hg(II) ions at pH 2.0. The retention of Hg(II) ions from a mixture of ions was greater than 90%. The resin showed a high selectivity for Hg(II) with respect to other metal ions. The Hg(II)‐loaded resin was able to be recovered with 4M HClO₄. The retention capacity was kept after four cycles of adsorption and desorption. The retention properties for Hg(II) were very similar with the batch and column methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3556–3562, 2003     

Synthesis and separation properties for Cu(II)‐Ni(II) of macroporous crosslinked polystyrene‐supported triethylenetetramine resin using Cu(II) as template

A new method for preparing a novel macroporous chelating resin that has good adsorption capability for Cu(II) and high selectivity for it with the coexistence of Ni(II) was introduced in this article. First, the aminated resin (PS‐TETA) was synthesized by the reaction of crosslinked macroporous chloromethylated polystyrene with triethylenetetramine. Subsequently, PS‐TETA was coordinated with Cu(II) and then PS‐TETA‐Cu was obtained. After the crosslinking reaction of PS‐TETA‐Cu with epoxy chloropropane, the adsorbed Cu(II) was removed by chlorhydric acid, and then the target resin‐Cu(II) template triethylenetetramine crosslinked polystyrene resin was obtained. The selectively sorption tests for Cu(II) showed that the sorption capacity was as high as 1.6 mmol/g and the selectivity coefficient α_{Cu(II)/Ni(II)} could reach to 9.06 with the coexistence of Ni(II). SEM and nitrogen adsorption at 77 K methods were used to characterize the porous structure of the resin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 963–967, 2007     

Heterogeneous synthesis of chelating resin organophosphonic acid‐functionalized silica gel and its adsorption property of heavy metal ions from fuel ethanol solutions

In this study, chelating resin silica gel chemically modified by poly(triethylenetetramine bis(methylenephosphonic acid)) (denoted as SG‐Cl‐T‐P) was successfully developed by heterogeneous synthesis method and used for adsorptive removal of heavy metal ions from fuel ethanol solutions, and the relevant modified organic group was calculated by DFT method at the B3LYP/6‐31 + G(d) level. SG‐Cl‐T‐P was characterized by Fourier transform infrared spectrometer, scanning electron microscope, energy dispersive X‐ray analysis system, porous analysis, etc. SG‐Cl‐T‐P has been used to investigate the adsorption of Hg(II),Cu(II), Mn(II), Co(II), Zn(II), Ni(II), Fe(III), and Cd(II) metal ions from ethanol solutions. The research results revealed that it has the better adsorption capacity for Hg(II) and Cd(II). © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Investigation on selective adsorption of Hg(II) ions using 4‐vinyl pyridine grafted poly(ethylene terephthalate) fiber

In the work, poly(ethylene terephthalate) (PET) fibers were grafted with 4‐vinyl pyridine (4‐VP) monomer using benzoyl peroxide (Bz₂O₂) as initiator in aqueous media. The removal of Hg(II) ions from aqueous solution by the reactive fiber was examined by batch equilibration technique. Effects of various parameters such as pH, graft yield, adsorption time, initial ion concentration, and adsorption temperature on the adsorption amount of metal ions onto reactive fibers were investigated. The optimum pH of Hg(II) was found 3. The maximum adsorption capacity was found as 137.18 mg g^?1. Moreover such parameters as the adsorption kinetics, the adsorption isotherm, desorption time and the selectivity of the reactive fiber were studied. The adsorption kinetics is in better agreement with pseudo‐first order kinetics, and the adsorption data are good fit with Freundlich isotherms. The grafted fiber is more selective for Hg(II) ions in the mixed solution of Hg(II)‐Ni(II), Hg(II)‐Zn(II), and Hg(II)‐Ni(II)‐Zn(II) at pH 3. Adsorbed Hg(II) ions were easily desorbed by treating with 1M HNO₃ at room temperature. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Resin I: Synthesis,characterization, and ion‐exchange properties of terpolymer resins derived from 2,4‐dihydroxypropiophenone,biuret, and formaldehyde

Terpolymers (2,4‐DHPBF) were synthesized by the condensation of 2,4‐dihydro‐xypropiophenone, biuret, and formaldehyde in the presence of acid catalyst with varying the molar ratio of reacting monomers. Terpolymer composition has been determined on the basis of their elemental analysis and their number–average molecular weight of these resin were determined by conductometric titration in nonaqueous medium. The viscosity measurements were carried out in N,N‐dimethyl formamide which indicate normal behavior. IR spectra were studied to elucidate the structure. The terpolymer resin has been further characterized by UV–visible and ¹H‐NMR spectra. The newly synthesized terpolymers proved to be selective chelating ion‐exchange terpolymers for certain metals. The chelating ion‐exchange properties of this terpolymer was studied for Fe (III), Cu (II), Hg (II), Cd (II), Co (II), Zn (II), Ni (II), and Pb (II) ions. A batch equilibrium method was employed in the study of the selectivity of metal ion uptake involving the measurement of the distribution of a given metal ion between the terpolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The terpolymer showed a higher selectivity for Fe (III), Hg (II), Cd (II), and Pb (II) ions than for Cu (II), Co (II), Zn (II), and Ni (II) ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Separation and concentration of trace Pb(II) by the porous resin loaded with α-zirconium phosphate crystals

Crystalline α-zirconium phosphate (α-ZrP) has been loaded in the pores of porous spherical polymer beads by impregnation of ZrOCl₂ · 8H₂O and hydrolysis of the zirconium salt followed by the hydrothermal reaction with phosphoric acid. The physicochemical properties of the α-ZrP loaded resin have been investigated in terms of X-ray diffraction, pore distribution, surface area and the distribution of α-ZrP in the polymer beads. The scanning electron microscope observation indicates that α-ZrP crystals distribute uniformly in the resin pore. The adsorption characteristics of the α-ZrP resin for the metal ions including Pb(II), Cd(II), Cu(II), Zn(II), Fe(III), Al(III) and Ca(II) have been examined. The present resin has revealed unexpectedly high selectivity toward the adsorption of Pb(II) and hence, interference from common metal ions (Na⁺, Ca²⁺) is not significant. Due to the remarkable selectivity, fast kinetics and chemical stability, the present α-ZrP resin has been effectively applied to the separation and enrichment of trace Pb(II) from aqueous solution.     

Melamine‐based microporous polymer for highly efficient removal of copper(II) from aqueous solution

In this study, we investigated the ability of a melamine‐based microporous polymer network as an adsorbent for removal of copper(II) species from aqueous solutions. A designed Schiff based network (SNW) with high specific surface area was synthesized using melamine and terephthalaldehyde monomers at 180 °C for 3 days followed by a freeze‐drying process. The porous structure of the material was confirmed by SEM analysis and CO₂ adsorption/desorption studies at 77.3 K. The adsorption character of the SNW polymer for various metal salts, namely Pb(II), Fe(II), Hg(II), Zn(II), Ni(II) and Cd(II), was investigated and a specific sorption behaviour against Cu(II) salts was observed. The role of pH and contact time was examined and the highest adsorption capacity for Cu(II) was found as 92% with pH 3.5 at the end of 300 min. As evidenced by XRD and Fourier transform infrared spectral analysis, the sorption mechanism is attributed to the coordination system formed between amino groups in the porous structure and Cu(II) ions. Reusability of the system was also demonstrated by applying four cycles without any significant loss of activity. © 2016 Society of Chemical Industry     

Development of PU‐TZnO solid‐phase extractor for selective detection of mercury in complex matrices

In this study, a new effective solid‐phase extractor (PU‐TZnO 3) was developed for a selective extraction and determination of mercury using inductively coupled plasma optical emission spectrometry. The selectivity of PUA (PU‐TZnO 0.5, PU‐TZnO 1, PU‐TZnO 3, or PU‐TZnO 5) was investigated toward several metal ions, including Au(III), Cd(II), Co(II), Cu(II), Hg(II), Pb(II), Pd(II), and Zn(II). Based on selectivity and pH studies, Hg(II) was the most quantitatively adsorbed on PU‐TZNO 3 phase at pH 2, indicating that PU‐TZnO 3 is more selective for Hg(II) as compared to other metal ions. Based on the adsorption isotherm analysis, the maximum adsorption capacity of PU‐TZnO 3 phase for Hg(II) was found to be 99.68 mg g⁻¹, following the Langmuir adsorption isotherm model. Further kinetic models suggested pseudo second‐order kinetic model for adsorption of Hg(II) on the PU‐TZnO 3. In addition, results of thermodynamic investigation demonstrated that a general spontaneous process is favorable for adsorption mechanism of Hg(II) on PU‐TZnO 3. POLYM. COMPOS., 38:2106–2112, 2017. © 2015 Society of Plastics Engineers     

Selective binding of mercury ions by poly(4‐vinylpyridine) hydrochloride resin

The binding ability of poly(4‐vinylpyridine) hydrochloride resin for Cu(II), Cd(II), Zn(II), Hg(II), Pb(II), Cr(III), and U(VI) was investigated. All these ions, except Hg(II), could be not removed from aqueous solutions under the same conditions. The selective sorption of Hg(II) from mixtures of ions was observed. The elution of Hg(II) bound to the resin was also investigated using various concentrations of nitric acid and perchloric acid. Due to rapid complexation, a high mercury ion‐binding capacity, high selectivity, and ease of regenerability, the resin can be useful for the removal and recovery of mercury ions from aqueous solutions. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1557–1562, 1999     

Zinc selective nano‐hybrid cation exchanger carboxymethyl cellulose Zr(IV) tungstate: Sol‐gel synthesis,physicochemical characterization,and analytical applications

Nano‐hybrid cation‐exchanger, carboxymethyl cellulose Zr(IV) tungstate was synthesized in the presence of surfactant. Physicochemical properties like thermal stability, surface morphology, particle size, and composition were evaluated by using thermogravimetric analysis/diffrential thermal analysis/diffrential thermogravimetry (TGA/DTA/DTG), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission elctron microscopy (TEM), and energy dispersive X‐ray (EDX) techniques. The ion exchange properties such as ion exchange capacity, elution behavior, eluent concentration, thermal effects, and pH titration were also performed to validate ion exchange behavior of synthesized material. Incorporation of carboxymethyl cellulose into the matrices of inorganic gels of Zr(IV) tungstate resulted enhanced ion exchange capacity and better mechanical stability of nano‐hybrid cation exchanger. A series of experiments were carried out for selective separation of Zn(II) ions from aqueous solutions of two‐component mixtures of heavy metal ions such as Zn(II)‐Hg(II), Zn(II)‐Cd(II), Zn(II)‐Ni(II), and Zn(II)‐Mg(II). The distribution studies showed that the synthesized nano‐hybrid cation‐exchanger is highly selective to Zn(II) ions. POLYM. COMPOS., 38:2057–2066, 2017. © 2015 Society of Plastics Engineers     

Separation of metal ions by water‐insoluble polymers containing sulfonic/sulfonate groups

A water‐insoluble polymer, poly(sodium 4‐styrene sulfonate), was synthesized by radical polymerization at different amounts (2, 4, 6, and 8 mol %) of crosslinking reagent (CR). At the lowest CR level (2 mol %), only a water‐soluble polymer is obtained, and consequently it could not be studied as resin. The polymerization yield ranged from 82.6 to 91.6%. The resin is characterized by FTIR spectroscopy, thermal analysis, and scanning electron microscopy. The metal ion affinity is studied for the cations: Hg(II), Cd(II), Zn(II), Pb(II), Cr(III), and Al(III) with a batch equilibrium procedure under different experimental conditions. The metal ion affinity increased as the pH increased. At pH 5, the resin showed an affinity greater than 97% for all metal ions. Hg(II) showed the highest retention value at pH 2. The maximum retention capacity is determined at optimum pH for Hg(II), Cd(II), Pb(II), and Zn(II). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4328–4333, 2006     

Water‐insoluble polymers with ability to remove metal ions

Crosslinked poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide‐co‐2‐acrylamido glycolic acid [P(MAAPDSA‐co‐AGCO)] was synthesized by radical polymerization and tested as an adsorbent under competitive and noncompetitive conditions for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), and Cr(III) by batch and column equilibrium procedures. The resin–metal ion equilibrium was achieved before 1 h. The resin showed a maximum retention capacity value for Hg(II) at pH 2 of 1.084 meq/g. The recovery of the resin was investigated at 20°C under different concentrations of HNO₃ and HClO₄. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3679–3685, 2004     

Sorption properties of poly(styrene‐co‐divinylbenzene) amine functionalized weak resin

The poly(styrene‐co‐divinylbenzene) amine functionalized weak resin was studied as adsorbent of heavy metal ions from an aqueous solution by using the Batch equilibrium procedure. The resin adsorbed Hg(II) 56% (0.56 mEq/g) at pH 2, and 45% (1.13 mEq/g) of U(VI), 38% (0.36 mEq/g) of Pb(II) at pH 5 from an aqueous solution containing 1 g/L of each metal ion. It did not adsorb Cd(II), Zn(II). The equilibrium time was achieved during the first hour. The maximum load capacity for Hg(II) was 0.8 mEq/g (75 mg)/g dry resin. It is possible to recover around 60% of the resin after the treatment with 1–4 M HClO₄ and HNO₃ of the loaded Hg(II) resin. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2123–2127, 2001     

Analytical applications of newly synthesized copolymer resin derived from p‐aminophenol,dithiooxamide, and formaldehyde

A copolymer resin (p‐APDF) has been synthesized using the monomers p‐aminophenol, dithiooxamide, formaldehyde in 1 : 1 : 2M proportions in the presence of 2M HCl as catalyst. The structure of p‐APDF copolymer has been elucidated on the basis of elemental analysis and various physicochemical techniques, i.e., UV‐visible, FTIR, and ¹H‐NMR spectroscopy. The number average molecular weight of copolymer resin was determined by nonaqueous conductometric titration in DMF. Viscosity measurement were carried out in DMF indicate normal behavior. The prepared resin proved to be a selective ion exchange resin for some metal ions. The chelating ion exchange properties of this resin was studied for Fe(III) and Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II) ions. A batch equilibrium method was used to study selectivity of metal ion uptake over a wide pH range and in media of various ionic strength. The resin showed a higher selectivity for Fe(III), Ni(II), Cu(II) ions than for Co(II), Pb(II), Zn(II), and Cd(II) ions. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,characterization, and properties of a selective adsorbent to mercury(II) ions

A resin containing 3‐(dimethylamine)propyl acrylate and 4‐vinylpyridine was synthesized by radical polymerization (in 1:1 mole ratio). Ammonium persulfate (0.5 mol %) and N,N′‐methylene‐bis‐acrylamide (2 mol %) were used as initiator and crosslinking reagents, respectively. The resin was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐Vis) spectroscopy. The ability to bind Hg(II), Cd(II), Zn(II), Pb(II), Cu(II), and Cr(III) as well as the maximum adsorption capacity and elution of Hg(II) ions from the loaded resin was studied. Sorption selectivity from ternary mixture Hg(II), Cd(II), and Zn(II) was studied at the optimum sorption pH value. At pH 2 the adsorbent retained 98% of Hg(II); the retention of the other metal ions was lower than 20%. The elution assay was made in HClO₄ solutions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2559–2563, 2002     

Synthesis and characterization of poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) copolymer beads for heavy‐metal removal

We prepared poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [poly(EGDMA–VTAZ)] beads (average diameter = 150–200 μm) by copolymerizing ethylene glycol dimethacrylate (EGDMA) with 1‐vinyl‐1,2,4‐triazole (VTAZ). The copolymer composition was characterized by elemental analysis and found to contain five EGDMA monomer units for each VTAZ monomer unit. The poly(EGDMA–VTAZ) beads had a specific surface area of 65.8 m²/g. Poly(EGDMA–VTAZ) beads were characterized by Fourier transform infrared spectroscopy, elemental analysis, surface area measurements, swelling studies, and scanning electron microscopy. Poly(EGDMA–VTAZ) beads with a swelling ratio of 84% were used for the heavy‐metal removal studies. The adsorption capacities of the beads for Cd(II), Hg(II), and Pb(II) were investigated in aqueous media containing different amounts of these ions (5–750 mg/L) and at different pH values (3.0–7.0). The maximum adsorption capacities of the poly(EGDMA–VTAZ) beads were 85.7 mg/g (0.76 mmol/g) for Cd(II), 134.9 mg/g (0.65 mmol/g) for Pb(II), and 186.5 mg/g (0.93 mmol/g) for Hg(II). The affinity order toward triazole groups on a molar basis was observed as follows: Hg(II) > Cd(II) > Pb(II). pH significantly affected the adsorption capacity of the VTAZ‐incorporated beads. The equilibrium data were well fitted to the Redlich–Peterson isotherm. Consideration of the kinetic data suggested that chemisorption processes could have been the rate‐limiting step in the adsorption process. Regeneration of the chelating‐beads was easily performed with 0.1M HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4276–4283, 2006     

Water‐insoluble polymers containing amine,sulfonic acid,and carboxylic acid groups: Synthesis,characterization, and metal‐ion‐retention properties

Crosslinked poly(acryloylmorpholine) and its copolymers poly(acryloyl morpholine‐co‐acrylic acid) and poly(acryloylmorpholine‐co‐2‐acrylamide‐2‐methyl‐1‐propane sulfonic acid) were synthesized by radical polymerization. The resins were completely insoluble in water and were characterized with Fourier transform infrared spectroscopy and thermal analysis. The metal ions Ag(I), Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), Al(III), and Cr(III) were investigated under competitive and noncompetitive conditions by a batch equilibrium procedure. The resin‐metal‐ion equilibrium was achieved before 5 min. The recovery of the resin was investigated at 20°C with different concentrations of HNO₃ and HClO₄. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3266–3274, 2006     

Synthesis and application of ion‐imprinted resin based on modified melamine–thiourea for selective removal of Hg(II)

A novel Hg(II) ion‐imprinted resin based on thiourea‐modified melamine was manufactured for selective elimination of Hg²⁺ from aqueous solutions. The polymerizable thiourea–melamine ligand together with its Hg(II) complex were extensively investigated using elemental analysis, Fourier transform infrared (FTIR) and ¹H NMR spectroscopies. The Hg(II) complex was used in a condensation polymerization in the presence of formaldehyde crosslinker and then the Hg(II) ions were leached out from the crosslinked polymeric network to finally leave the ion‐imprinted Hg‐PMTF resin. Both ion‐imprinted Hg‐PMTF and non‐imprinted resins were examined utilizing scanning electron microscopy and FTIR spectroscopy. The potential of the prepared resin for selective separation of Hg(II) ions from aqueous solutions was then evaluated by performing a series of batch experiments. Hg‐PMTF displayed an obvious rapid removal of Hg(II) ions with a pseudo‐second‐order kinetic pattern. In addition, the Langmuir adsorption isotherm model exhibited the best fit with the experimental data with comparatively high maximum adsorption capacity (360.5 mg g^?1). © 2015 Society of Chemical Industry     

Preparation of a novel chelating resin bearing amidinothiourea moieties and its removal properties for Hg(II) ions in aqueous solution

A novel chelating resin bearing amidinothiourea (ADTU) moieties was prepared by chloroethyl crosslinked polystyrene (CMPS) with ADTU in the presence of a phase transfer catalyst. Fourier transform infrared spectra (FT-IR) and scanning electron microscopy (SEM) were used to characterized the resulting chelating resin. The saturated adsorption capacity of Hg(II) ions estimated from the Langmuir model was up to 1215 mg g^?1at 313 K. Furthermore, the resin was able to selectively separate Hg(II) from multicomponent solutions with Cd(II), Co(II), Cu(II), Zn(II), Mg(II) and Pb(II). The desorption process showed the mercury recovery reached to 99.2% under eluting condition of 1 M HCl + 8% thiourea.     

High‐retention properties for Hg(II) ions of a resin containing ammonium and pyridine groups

The metal‐ion uptake behavior of the chelating resin poly([(3‐(methacryloylamino)propyl] trimethyl ammonium chloride‐co‐4‐vinyl pyridine) has been investigated. The resin is obtained by radical copolymerization in a yield of 99.6%. The hydrophilic resin shows a high retention capacity and selectivity toward Hg(II) ions in the presence of Cu(II), Pb(II), Cd(II), Zn(II), and Cr(III) ions. A retention of Hg(II) higher than 99% is observed after 5 min. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2595–2599, 2002