Ultrasound‐accelerated dehydrogenation of poly(1,3‐cyclohexadiene): efficient synthesis of poly(para‐phenylene)

The effect of ultrasonication on the dehydrogenation of poly(1,3‐cyclohexadiene) (PCHD) with benzoquinones was examined with the aim of improving the rate of reaction at moderate temperature. The type of solvent and the ultrasound treatment strongly affected the dehydrogenation of PCHD. The rate of reaction of the dehydrogenation of PCHD with 2,3‐dichloro‐5, 6‐dicyano‐1,4‐benzoquinone (DDQ) or 3,4,5,6‐tetrachloro‐1,2‐(o)‐benzoquinone (TOQ) was markedly improved by the use of ultrasound, and poly(para‐phenylene) (PPP) and PPP–TOQ complex, respectively, were successfully obtained. The electron drift mobility for PPP was of the order of 10^?4 cm² V^?1 s^?1 with a negative slope, while that for PPP–TOQ complex was of the order of 10^?3 to 10^?4 cm² V^?1 s^?1 with a negative slope. The dehydrogenation of PCHD with benzoquinones under ultrasonication is thus an effective method to obtain soluble PPP with a well‐defined polymer chain structure. Copyright © 2010 Society of Chemical Industry     

Anionic polymerization of 1,3‐cyclohexadiene: Addition of poly(1,3‐cyclohexadienyl)lithium to fullerene‐C60

The addition of poly(1,3‐cyclohexadiene) (PCHD) carbanion to fullerene‐C₆₀ (C₆₀) was examined using poly(1,3‐cyclohexadienyl)lithium (PCHDLi), PCHDLi/1,4‐diazabicyclo[2,2,2]octane (DABCO), and PCHDLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA). The reactivity of PCHD carbanions was in the order of PCHDLi > PCHDLi/DABCO > PCHDLi/TMEDA, regardless of the polymer main chain structure. PCHDLi, PCHDLi/DABCO, and PCHDLi/TMEDA in toluene formed σ‐structures, σ‐ and π‐structures, and π‐structures, respectively. The degree of localization on the terminal carbanion was a main factor for control of this addition reaction. In addition, all 1,2‐cyclohexadiene (1,2‐CHD) unit sequences contributed to preventing the addition reaction. That is, large steric hindrance of the polymer main chain was another important factor to control the addition reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of ω‐functionalized poly(1,3‐cyclohexadiene): addition of fluorescent functional group to the polymer chain end

BACKGROUND: Poly(1,3‐cyclohexadiene) (PCHD) is of interest as a precursor for the synthesis of a new class of high‐performance hydrocarbon polymers. ω‐Functionalization of PCHD offers a new opportunity for the preparation of a variety of multifunctional PCHD derivatives. RESULTS: ω‐Functionalized PCHD containing a fluorenyl (or anthracenyl) group at the polymer chain end was successfully synthesized by post‐polymerization reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with alkyl halides containing a fluorescent functional group. The degree of nucleophilicity of PCHDLi and the control of side reactions were very important factors to achieve a high conversion for the post‐polymerization reactions of PCHDLi. The ω‐functionalized PCHDs obtained exhibited strong photoluminescence and the wavelength of the fluorescence was adjustable by changing the structure of the ω‐functional group. CONCLUSION: ω‐Functionalized PCHD is a preferable precursor that can be utilized to obtain a new class of multifunctional hydrocarbon polymers containing six‐membered rings in the main chain. Copyright © 2007 Society of Chemical Industry     

Synthesis of ω‐pyrenyl‐functionalized poly(1,3‐cyclohexadiene)

ω‐Pyrenyl‐functionalized poly(1,3‐cyclohexadiene) (PCHD) was successfully synthesized by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with 1‐chloromethylpyrene (ClMe‐PY). This postpolymerization reaction consisted of two competitive reactions: the addition reaction of the pyrenyl group, and a hydrogen abstraction reaction (lithiation) as a side reaction. The degree of nucleophilicity of PCHDLi was a very important factor for suppression of the side reaction, and the PCHDLi/amine system, which has high nucleophilicity, produced high ω‐pyrenyl‐functionalization for PCHD. The UV/vis and fluorescence spectra for ω‐pyrenyl‐functionalized PCHD were bathochromically shifted, relative to that of pyrene. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Degradation of the covalent carbon–carbon bond between fullerene‐C60 and poly(1,3‐cyclohexadiene)

The degradation of fullerene‐C₆₀ (C₆₀) end‐capped poly(1,3‐cyclohexadiene) (C₆₀‐PCHD) with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) was examined to reveal the nature of the covalent carbon–carbon bond between C₆₀ and PCHD (C₆₀‐PCHD bond). The number average molecular weight (M_n) of C₆₀‐PCHD decreased with an increase in the degree of dehydrogenation, and the elimination of a PCHD arm from a C₆₀ occurred. The degradation of the C₆₀‐PCHD bond via a 1,4‐CHD unit was faster than that via a 1,2‐CHD unit, whereas the C₆₀‐poly(cyclohexane) bond was stable. The degradation of the C₆₀‐PCHD bond with DDQ was caused by the dehydrogenation of a CHD unit adjoining a C₆₀ core. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of pH‐sensitive networks containing degradable poly(1,3‐dioxolane) segments

pH‐sensitive networks were obtained by radical copolymerization of telechelic poly(1,3‐dioxolane) (PDXLDA) with acrylic acid (AA). PDXLDA was synthesized by acrylation of the corresponding dihydroxylated polyacetal (polyDXL) with AA in pyridine. The copolymer networks of poly(AA‐b‐DXL) showed pH sensitivity due to —COOH groups, which are insoluble in any solvents, but can swell in water or good solvents. The swelling behavior is closely related to the solvents and is composition‐dependent. The networks containing polyDXL segments can be decrosslinked under acidic conditions due to the low ceiling temperature of polyDXL. After degradation, the linear segments of polyDXL became cycled molecules. The networks' structure, swelling behavior, and degradation were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, GC–MS analysis, and swelling data. This kind of material can be potentially used in biosystems, such as in intelligent drug‐delivery systems. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1678–1682, 2002     

One‐step synthesis of bis‐macromonomers of poly(1,3‐dioxolane) catalyzed by Maghnite‐H+

Telechelic poly(1,3‐dioxolane) (PDXL) bis‐macromonomers bearing methyl methacrylate end groups were prepared by cationic ring‐opening polymerization of 1,3‐dioxolane (DXL), in the presence of methacrylic anhydride, catalyzed by Maghnite‐H⁺ (Mag‐H⁺), in bulk and in solution. Maghnite is a montmorillonite sheet silicate clay, which exchanged with protons to produce Mag‐H⁺. The influence of the amount of Mag‐H⁺, monomer (DXL), and methacrylic anhydride on monomer conversion was studied. The polymerization yield and the molecular weight of α,ω‐bis‐unsaturated PDXLs prepared depend on the amount of Mag‐H⁺ used and the reaction time. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of poly(4‐diphenylaminostyrene)‐Poly(9‐vinylanthracene) binary block copolymer

Block copolymerization of plural types of monomers offers a new opportunity for the preparation of a variety of multifunctional polymers. Poly(4‐diphenylaminostyrene) (PDAS)‐poly(9‐vinylanthracene) (PVAN) binary block copolymer (PDAS‐PVAN) was synthesized by (living) anionic polymerization using the benzyllithium/N,N,N′,N′‐tetramethylethylenediamine system. The photoluminescence emission of PDAS‐PVAN was enhanced by the fluorescence resonance energy transfer from PDAS block to PVAN block in PDAS‐PVAN. The hole drift mobility of the copolymer was controllable by the amount of triphenylamino groups in the polymer chain. The optical and electrical properties of PDAS‐PVAN were adjustable through the polymer chain structure. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Highly trans‐1,4‐specific polymerization of 1,3‐butadiene catalyzed by [2,6‐bis{(4S)‐ (−)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine] chromium complex activated with modified methylaluminoxane

Chromium complexes with N,N,N‐tridentate ligands, LCrCl₃ (L = 2,6‐bis{(4S)‐(?)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine ( 1 ), 2,2′:6′,2″‐terpyridine ( 2 ), and 4,4′,4″‐tri‐tert‐butyl‐2,2′:6′,2″‐terpyridine ( 3 )), were prepared. The structures of 1 and 2 were determined by X‐ray crystallography. Upon activation with modified methylaluminoxane (MMAO), 1 catalyzed the polymerization of 1,3‐butadiene, while 2 and 3 was inactive. The obtained poly(1,3‐butadiene) obtained with 1 ‐MMAO was found to have completely trans‐1,4 structure. The 1 ‐MMAO system also showed catalytic activity for the polymerization of isoprene to give polyisoprene with trans‐1,4 (68%) and cis‐1,4 (32%) structure. Copyright © 2011 Society of Chemical Industry     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane‐poly(dimethylsiloxane) block copolymers

The heterofunctional condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane with dihydroxydiphenylsilane at various ratios of initial compounds in the presence of amines was carried out, and α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with various degrees of condensation were obtained. Corresponding block copolymers were obtained by heterofunctional polycondensation of synthesized α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with α,ω‐dichlorodimethylsiloxanes in the presence of amines. Thermogravimetry, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray analysis were carried out on the synthesized block coplymers. Differential scanning calorimetry and wide‐angle X‐ray studies of these copolymers showed that their properties were determined by the ratio of the lengths of the flexible linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane fragments in the main macromolecular chain. Two‐phase systems were obtained with specific flexible and rigid fragment length values in synthesized block copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3462–3467, 2006     

Synthesis of multiblock copolymers of poly(2‐vinylpyridine) and polyoxyethylene

Telechelic dihydroxy poly(2‐vinylpyridine) (THPVP) samples with different molecular weights were synthesized by using lithium α‐methylnaphthalene as an anionic initiator in mixed solvents of benzene and tetrahydrofuran (THF). Then multiblock copolymers of poly(2‐vinylpyridine) (P2VP) and polyoxyethylene (PEO) were obtained by condensing THPVP and PEO with dichloromethane in the presence of potassium hydroxide. The effects of reaction time, molecular weight of PEO and THPVP, and raw meal ratio PEO/THPVP (w/w) were investigated. The best conditions were found. The copolymers can be purified by water and toluene. The purified copolymers were characterized by infrared (IR) and ¹H nuclear magnetic resonance (¹H‐NMR). The PEO segment content was calculated from the integral curve of ¹H‐NMR spectra. The results showed that these multiblock copolymers were connected through oxymethylene. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1632–1636, 2003     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)– poly(dimethylsiloxane) block copolymers

The hydrolytic condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane under neutral conditions produced α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane (polymerization degree ≈ 4). The homofunctional condensation of α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane in a toluene solution and in the presence of activated carbon was performed, and dihydroxy‐containing oligomers with various degrees of condensation were obtained. Through the heterofunctional condensation of dihydroxy‐containing oligomers with α'ω‐dichlorodimethylsiloxanes in the presence of amines, corresponding block copolymers were obtained. Gel permeation chromatography, differential scanning calorimetry, thermomechanical analysis, thermogravimetry, and wide‐angle roentgenography investigations were carried out. Differential scanning calorimetry and roentgenography studies of the block copolymers showed that their properties were determined by the ratio of the lengths of the flexible and linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane) fragments in the macromolecular chain. At definite values of the lengths of the flexible and rigid fragments, a microheterogeneous structure was observed in the synthesized block copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1409–1417, 2002; DOI 10.1002/app.10335     

Synthesis and characterization of poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate: Its metal complexes and antimicrobial activity studies

Poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate [poly(TCMMA)] is prepared in dimethyl sulfoxide using 2,2′‐azobisisobutyronitrile as an initiator at 60°C. Poly(TCMMA) is characterized by IR and ¹H‐NMR spectroscopic techniques. Cadmium(II), copper(II), and nickel(II) chelates of poly(TCMMA) were synthesized. An elemental analysis of the polychelates suggests a metal/ligand ratio of 1:2. The polychelates are further characterized by IR and magnetic susceptibility measurements. The thermal properties of the polymer and metal chelates are also discussed. The molecular weights of the poly(TCMMA) are determined by the gel permeation chromatography technique. The antimicrobial activities of the polymer and metal chelates are tested against Staphylococcus aureus COWAN I (bacteria), Escherichia coli ATCC 25922 (bacteria), Listeria monocytogenes SCOTTA (bacteria), Bacillus subtilis LMG (bacteria), Enterobacter aeroginosa CCM 2531 (bacteria), Klebsiela pneumania FMCS (bacteria), Candida albicans CCM 314 (Mayo yeast), and Saccharamyces cerevisiae UGA 102 (Mayo yeast). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3244–3251, 2003     

1,2‐Polymerization of 1,3‐butadiene with Cr(acac)3‐alkylaluminum catalysts

The polymerization of butadiene (Bd) with chromium(III) acetylacetonato [Cr(acac)₃]‐trialkylaluminum (AlR₃) or methylaluminoxane (MAO) catalysts was investigated for the synthesis of 1,2‐poly(Bd). The polymerization of Bd was found to proceed with Cr(acac)₃‐AlR₃ (R‐Me, Et, i‐Bu) catalysts to give poly(Bd) with a high 1,2‐vinyl content, but highly isotactic 1,2‐poly(Bd) was not synthesized. The Cr(acac)₃‐MAO catalyst gave a polymer consisting of low 1,2 units. The effects of the Al/Cr mole ratios on the polymerization of Bd with the Cr(acac)₃‐AlR₃ catalysts were observed. With an increase of Al/Cr mole ratios, the isotactic (mm) content of the polymer increased but the 1,2‐vinyl contents decreased. The effects of the aging time and temperatures of the catalysts on the polymerization of Bd with the Cr(acac)₃‐AlR₃ catalysts were also observed, and the lower polymerization temperature and the prolonged aging time were favored to produce the 1,2‐vinyl structure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1621–1627, 2000     

Shape memory effect of poly(methylene‐1,3‐cyclopentane) and its copolymer with polyethylene

Poly(methylene‐1,3‐cyclopentane) (PMCP) cyclopolymerized from 1,5‐hexadiene by metallocene catalyst, rac‐(ethylenebis(1‐indenyl))Zr(N(CH₃)₂)₂ is partially crystalline and has a value of elongation at break of more than 400% in the temperature range 25–85 °C. The shape memory effect of PMCP with moderate molecular weight is enhanced by sequentially polymerized polyethylene segments, the crystalline phase of which seems to strengthen the fixed structure which memorizes the original shape. The glass transition temperature or melting temperature of PMCP can be selectively used as shape recovery temperature when an appropriate deformation temperature is chosen. © 2002 Society of Chemical Industry     

Synthesis of poly(ester‐anhydride)s based on poly(ϵ‐caprolactone) prepolymer

The objective of this study was to prepare high molecular weight poly(ester‐anhydride)s by melt polycondensation. The polymerization procedure consisted of the preparation of carboxylic acid terminated poly(?‐caprolactone) prepolymers that were melt polymerized to poly(?‐caprolactone)s containing anhydride functions along the polymer backbone. Poly(?‐caprolactone) prepolymers were prepared using either 1,4‐butanediol or 4‐(hydroxymethyl)benzoic acid as initiators, yielding hydroxyl‐terminated intermediates that were then converted to carboxylic acid‐terminated prepolymers by reaction with succinic anhydride. Prepolymers were then allowed to react with an excess of acetic anhydride, followed by subsequent polycondensation to resulting high molecular weight poly(ester‐anhydride)s. Upon coupling of prepolymers, size exclusion chromatography analyses showed an increase from 3600 to 70,000 g/mol in number‐average molecular weight (M_n) for the 1,4‐butanediol initiated polymer, and an increase from 7200 to 68,000 g/mol for the 4‐(hydroxymethyl)benzoic acid‐initiated polymer. 4‐Hydroxybenzoic acid and adipic acid were also used as initiators in the preparation of poly(?‐caprolactone) prepolymers. However, with these initiators, the results were not satisfactory. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 176–185, 2001     

Water transport properties in poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) biopolymers

Water sorption and diffusion have been investigated in poly(3‐hydroxybutyrate) (PHB) and three poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymers [P(HB‐HV)] by means of a Cahn electromicrobalance. Permeability of these samples have been determined using a gravimetric permeation cell. Two experimental setups were used for the gravimetric sorption measurements, under dynamic and static conditions, respectively. The differences observed in the results obtained using these techniques are discussed. The sorption measurements have evidenced the tendency of water molecules to form aggregates or clusters in the polymer. In addition, the static sorption method revealed the potential of PHB and P(HB‐HV) to undergo molecular relaxations, eventually leading to a partial desorption of the previously sorbed water after an induction period. The clustering effect was adequately described by the polycondensation model. On the other hand, the interpretation of the diffusivity in terms of mobility coefficients has revealed a competition between a plasticization effect and clustering. As a whole, water transport properties in PHB and its copolymers can be considered to be very close in magnitude to those of common thermoplastics such as PVC and PET. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 455–468, 1999     

Preparation of electrorheological active ionomers from poly(2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine)

In this study, synthesis, characterization, partial hydrolysis, and salt formation of poly(2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), (poly(HEMA)‐co‐poly‐(4‐VP)) copolymers were investigated. The copolymers were synthesized by free radical polymerization using K₂S₂O₈ as an initiator. By varying the monomer/initiator ratio, chain lengths of the copolymers were changed. The copolymers were characterized by gel permeation chromatography (GPC), viscosity measurements, ¹H and ¹³C NMR and FTIR spectroscopies, elemental analysis, and end group analysis methods. The copolymers were partially hydrolyzed by p‐toluene sulfonic acid monohydrate (PTSA·H₂O) and washed with LiOH_(aq) solution to prepare electrorheological (ER) active ionomers, poly(Li‐HEMA)‐co‐poly(4‐VP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3540–3548, 2006     

Drug release from electrospun fibers of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) grafted with poly(N‐vinylpyrrolidone)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. Based on these graft copolymers, electrospun fiber mats and commonly cast films were explored as drug delivery vehicles using tetracycline hydrochloride as a model drug. Toward that end, the fibers were electrospun and the films were cast from chloroform solutions containing a small amount of methanol to solubilize the drug. The Brookfield viscosities of the solution were determined to achieve the optimal electrospinning conditions. The vitro release of the tetracycline hydrochloride from these new drug delivery systems was followed by UV–vis spectroscopy. To probe into the factors affected on the release behavior of these drug delivery systems, their water absorbing abilities in phosphate buffer solution were investigated, together with their surface hydrophilicity, porosity and crystallization properties were characterized by water contact angles, capillary flow porometer, DSC, and WAXD, respectively. The morphological changes of these drug delivery vehicles before and after release were also observed with SEM. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012