NOAA-AVHRR NDVI decomposition and subpixel classification using linear mixing in the Argentinean Pampa

Crop Normalized Difference Vegetation Index (NDVI) time profiles and crop acreage estimates were derived from the application of linear mixture modelling to Advanced Very High Resolution Radiometer (AVHRR) data over a test area in the southern part of the Pampa region, Argentina. Bands 1 and 2 from seven AVHRR scenes (June to January 1991) were combined to produce fraction images of winter crops, summer crops and pastures. A Landsat Thematic Mapper (TM) scene of the region was classified and superimposed to the AVHRR Local Area Coverage (LAC) data by means of a correlation technique. Each class signature was extracted by regressing the AVHRR response on the cover types proportions, estimated from Landsat-TM data, over sets of calibration windows. The crop NDVI profiles were hence derived from the class signatures in bands 1 and 2. These profiles appeared consistent with the cover types, but variability depending on the set of windows was noted. The assessment of the class signatures was indirectly accomplished through the subpixel classifications of the AVHRR data, performed using the different sets of class spectra. Although some discrepancies between AVHRR and Landsat–TM estimates were observed at the individual window level, the classification results compared quite well on a regional scale with Landsat–TM estimates: crop acreage was estimated to an overall accuracy ranging from 89 to 95 per cent according to the spectra used in the classification. Definitely, the proposed methodology should permit a better exploitation of the temporal resolution of AVHRR data in both the areas of yield prediction and vegetation classification. Furthermore, the perational application of such a methodology for crop monitoring will undoubtedlybe facilitated with the coming sensor systems such as the ModerateResolution Imaging Spectroradiometer (MODIS), the SPOT Vegetation Monitoring Instrument or the ‘Satelite Argentino Cientifico’ (SAC–C).     

Multi-temporal and multi-source cartography of the glacial cover of Nevado Coropuna (Arequipa,Peru) between 1955 and 2003

This study reports on the glacial cover evolution of the Nevado Coropuna between 1955 and 2003, based on Peruvian topographic maps and satellite images taken from the Landsat 2 and 5 multispectral scanner (MSS), Landsat 5 Thematic Mapper (TM) and Landsat 7 (ETM+). The normalized difference snow index has been applied to these images to estimate the glacierized area of Coropuna. The satellite-based results show that the glacier area was 105 ± 16 km² in 1975 (Landsat 2 MSS), which then reduced to 96 ± 15 km² in 1985 (Landsat 5 MSS), 64 ± 8 km² in 1996 (Landsat 5 TM) and 56 ± 6 km² in 2003 (Landsat 5 TM). Altogether, between 1955 and 2003, Coropuna lost 66 km² of its glacial cover, which represents a mean retreat of 1.4 km² year^?1, that is, a loss of 54% in 48 years (11% loss per decade). The maximum rate of retreat occurred during the 1980s and 1990s, a phenomenon probably linked with the pluviometric deficit of El Niño events of 1983 and 1992.     

SPOT VEGETATION for characterizing boreal forest fires

The potential of the recent SPOT VEGETATION (VGT) sensor for characterizing boreal forest fires was investigated. Its capability for hotspot detection and burned area mapping was assessed by analysing a series of VGT, NOAA/AVHRR, and Landsat TM images over a 1541 km²     

A technique for extrapolating and validating forest cover across large regions Calibrating AVHRR data with TM data

Abstract

An approach to extending high-resolution forest cover information across large regions is presented and validated. Landsat Thematic Mapper (TM) data were classified into forest and nonforest for a portion of Jackson County, Illinois. The classified TM image was then used to determine the relationship between forest cover and the spectral signature of Advanced Very High Resolution Radiometer (AVHRR) pixels covering the same location. Regression analysis was used to develop an empirical relationship between AVHRR spectral signatures and forest cover. The regression equation developed from data from the single county calibration area in southern Illinois was then applied to the entire AVHRR scene, which covered all or parts of ten states, to produce a regional map of forest cover. This map was used to derive estimates of forest cover, within a geographical information system (GIS), for each of the 428 counties located within the boundaries of the original AVHRR scene. The validity of the overall regional map was tested by comparing the AVHRR/TM-derived estimates of county forest cover with independent estimates of county forest cover developed by the U.S. Forest Service (USFS). The overall correlation coefficient of the AVHRR/TM and USFS county forest cover estimates was r=0-89 (n=428 counties). Not surpris0ingly, some individual states and the areas nearer to the southern Illinois calibration centre had higher correlation coefficients. Absolute estimates of forest cover percentages were also significantly well predicted. With the future inclusion of multiple calibration centres representing a number of physiographic regions, the method shows promise for predicting continental and global estimates of forest cover.     

Approaches to fractional land cover and continuous field mapping: A comparative assessment over the BOREAS study region

Subpixel land cover mapping involves the estimation of surface properties using sensors whose spatial sampling is coarse enough to produce mixtures of the properties within each pixel. This study evaluates five algorithms for mapping subpixel land cover fractions and continuous fields of vegetation properties within the BOREAS study area. The algorithms include a conventional “hard”, per-pixel classifier, a neural network, a clustering/look-up-table approach, multivariate regression, and linear least squares inversion. A land cover map prepared using a Landsat TM mosaic was adopted as the source of fine scale calibration and validation data. Coarse scale mixtures of five basic land cover classes and continuous vegetation fields, both corresponding to the field of view of SPOT-VEGETATION imagery (1.15-km pixel size), were synthesised from the TM mosaic using a modelled point spread function. Two measures of land cover distribution were used, fractions of fine scale land cover categories and continuous fields of vegetation structural characteristics. The subpixel algorithms were applied using both proximate (<100 km) and distant (>400 km) separation between training and validation regions. “Hard” classification performed poorly in estimating proportions or continuous fields. The neural network, look-up-table and multivariate regression algorithms produced good matches of spatial patterns and regional land cover composition for the proximate treatment. However, all three methods exhibited substantial biases with the distant treatment due to the characteristics of the training data. Linear least squares inversion offers a relatively unbiased but less precise alternative for subpixel proportion and fraction mapping as it avoids calibration to the a priori distribution of land cover in the training data. In general, a combination of multivariate regression for proximate training data and linear least squares inversion for distant training data resulted in woody fraction estimates within 20% of the Landsat TM classification-based estimates.     

Reducing the effects of vegetation cover on airborne radiometric data using Landsat TM data

The gamma-ray spectrometry responses from bedrock in Canadian Shield areas are substantially masked by overburden and vegetation. Proper interpretation of airborne gamma-ray spectrometry data is dependent on accounting for the interference provided by surface cover. In this paper, a method is tested to correct airborne gamma-ray spectrometry, acquired over the Canadian Shield of northeastern Alberta, for vegetation screening by estimating the proportions of bedrock and vegetation cover from Landsat TM data. TM pixel values, due to the patchy network of bedrock and vegetation, result from a spectral mixture of these ground cover classes. Linear unmixing was implemented to deconvolve TM bands in abundance images to estimate proportions of bedrock and vegetation for each pixel. The outcrop abundance image, representing spatial variation in area percentage of bedrock, is used in linear regression analysis to calibrate co-registered K, eTh, and eU gamma-ray spectrometry channels to 40 per cent bedrock endmember images.     

Review of: “ Integrative Approaches in Remote Sensing.” Edited by N. LONGDON (Noordwijk,The Netherlands: ESTEC,ESA SP-214. Proceedings of an EARSeL/ESA symposium, 8-11 April 1984.) [Pp. 375.] Price Ff 170.

Three AVHRR-LAC data sets acquired in September 1990 and January 1991 were used to map the forest resources of Madagascar. The island was partitioned into four strata to include: (1) the western hardwoods, (2) the central grasslands, (3) the eastern rainforest, and (4) spiny forest. Each stratum was classified separately using AVHRR-LAC data in conjunction with 1984-1988 Landsat-MSS photoproducts. The results of AVHRR classification indicate that approximately 11 per cent of the island is covered by forest. Approximately 1 per cent of the island was obscured by clouds and could not be enumerated. Estimates of forest area, by stratum, follow: western hardwoods, 6697 km²; central grasslands, 2830km²; eastern rainforest 34167km²; and spiny forest, 17 224 km². The total forest area on the 587041km² island is estimated to be 60918km². The AVHRR forest map was compared to a mid 1970s land cover map which was developed using Landsat-MSS photoproducts. The average class agreement between the mid 1970s ground reference map and the 1990 AVHRR-LAC map was 78-2 per cent, the overall accuracy was 81-1 per cent. Areas identified as forest on the ground reference map on the 1990 AVHRR map agreed only 62 per cent of the time, however, that figure confounds AVHRR misclassifi-cation error with actual forest loss over the decade. Much of the per-pixel disagreement between the ground reference and AVHRR maps involved areas identified as forest in the 1970s and as nonforest in 1990. These results demonstrate that one kilometre spatial resolution satellite data may be used to provide a reconnaissance level survey of the forest resources of a region or subcontinent when used in conjunction with fine resolution data.     

Subpixel forest cover in central Africa from multisensor, multitemporal data

Seven Landsat Multispectral Scanner (MSS) scenes in central Africa were coregistered with 8 km resolution data from the 1987 AVHRR Pathfinder Land data set. Percent forest cover in each 8 km grid cell was derived from the classified MSS scenes. Linear relationships between percent forest cover and 30 multitemporal metrics derived from all AVHRR optical and thermal channels were determined. Correlations were strongest for the mean annual normalized difference vegetation index (NDVI) and mean annual brightness temperature (AVHRR Channel 3) and weakest for those metrics, besides NDVI, based on near-infrared reflectances (AVHRR Channel 2). The relationships were used to estimate percent forest cover in various locations in the study area using multiple linear regression and regression trees. Overall, the multiple linear regression provided more accurate results. Predicted percent forest cover estimates were within 20% of the “actual” percent forest cover (derived from the MSS data) for approximately 90% of the grid cells. The RMS error for the prediction was 12% forest cover. RMS errors above 18% forest cover were obtained when using AVHRR data from a single month to derive predictive relationships. The results demonstrate that multitemporal data reflecting vegetation phenology can be used to estimate subpixel forest cover at coarse spatial resolutions.     

Model development and comparison to predict softwood and hardwood per cent cover using high and medium spatial resolution imagery

The recent availability of high spatial resolution multispectral scanners provides an opportunity to adapt existing methods and test models to derive spatially explicit forest type and per cent cover information at the Landsat pixel level. A regression modelling methodology was applied for scaling‐up high resolution (IKONOS) to medium spatial resolution satellite imagery (Landsat) to predict softwood and hardwood forest type and density (per cent cover) in a northern Maine study area. Regression relationships (63 different models) were developed and compared. The model variables included vegetation indices and several date (season) combinations of Landsat Enhanced Thematic Mapper Plus (ETM+) imagery (August, September, October and May).

A model incorporating all variables from four dates of Landsat ETM+ imagery produced the highest coefficient of variation in predicting both softwood (0.655) and hardwood cover (0.66). The addition of vegetation indices with the six ETM+ reflected bands did not significantly improve or detract from the regression relationships for any of the multi‐date or single date models examined. A two‐date combination of October and May variables provided an acceptable (and arguably more cost‐effective) model as the adjusted R ² value was 0.645 for softwood and 0.649 for hardwood. A significant result was that all single‐date models produced inferior results with a sharp drop in adjusted R ², compared with the multi‐date seasonal models. This research has demonstrated that the regression models including multi‐date variables produce good results and can provide spatially explicit forest type and stand structure data that has been difficult or infeasible to obtain from medium spatial resolution imagery using traditional classification methods.     

Validation of operational AVHRR subpixel snow retrievals over the European Alps based on ASTER data

Snow is of great economic and social importance for the European Alps. Accurate monitoring of the alpine snow cover is a key component in studying regional climate change as well as in daily weather forecasting and snowmelt run‐off modelling. These applications require snow cover information on a high temporal resolution in near‐real time. For the European Alps, operational snow cover fraction maps are generated on a daily basis using data from the Advanced Very High Resolution Radiometer (AVHRR) on board the National Oceanic and Atmospheric Administration (NOAA) platforms. Snow cover distribution is inherently discontinuous and heterogeneous in this mountainous region. We have therefore implemented a straightforward multiple endmember unmixing approach to estimate fractional snow cover. Subpixel proportions are difficult to validate because similar products are not available and appropriate ground‐based observations do not exist. In this study, we validate AVHRR subpixel snow retrievals using binary classified data sets from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) to establish absolute errors of our operational approach at three test sites. Our analysis indicates that the AVHRR subpixel maps compare well with the aggregated ASTER data, showing an overall correlation of 0.78 and providing subpixel estimates with a mean absolute error of 10.4% fractional snow cover. Discrepancies between AVHRR and ASTER snow fraction maps can be attributed to varying snow conditions, terrain effects and density in forest cover.     

Systematic corrections of AVHRR image composites for temporal studies

For quantitative studies of vegetation dynamics, satellite data need to be corrected for spurious effects. In this study, we have applied several changes to an earlier advanced very high resolution radiometer (AVHRR) processing methodology (ABC3; [Remote Sens. Environ. 60 (1997) 35; J. Geophys. Res.-Atmos. 102 (1997) 29625; Can. J. Remote Sens. 23 (1997) 163]), to better represent the various physical processes causing contamination of the AVHRR measurements. These included published recent estimates of the NOAA-11 and NOAA-14 AVHRR calibration trajectories for channels 1 and 2; the best available estimates for the water vapour, aerosol and ozone amounts at the time of AVHRR data acquisition; an improved bidirectional reflectance algorithm that also takes into consideration surface topography; and an improved image screening algorithm for contaminated pixels. Unlike the previous study that compared the composite images to a single-date AVHRR image, we employed coincident TM images to approximate the AVHRR pixel field of view during the data acquisition. Compared to ABC3, the modified procedure ABC3V2 was found to improve the accuracy of AVHRR pixel reflectance estimates, both in the sensitivity (slope) of the regression and in r². The improvements were especially significant in AVHRR channel 1. In comparison with reference values derived from two full TM scenes, the corrected AVHRR surface reflectance estimates had average standard errors values of ±0.009 for AVHRR C1, ±0.019 for C2, and ±0.04 for NDVI; the corresponding r² values were 0.55, 0.80, and 0.50, respectively. The changes in ABC3V2 were not able to completely remove interannual variability for land cover types with little or no vegetation cover, which would be expected to remain stable over time, and they increased the interannual variability of mixed forest and grassland. These results are attributed to a combination of increased sensitivity to interannual dynamics on one hand, and the inability to remove all sources of noise for barren or sparsely vegetated northern land cover types on the other.     

Cropland distributions from temporal unmixing of MODIS data

Knowledge of the distribution of crop types is important for land management and trade decisions, and is needed to constrain remotely sensed estimates of variables, such as crop stress and productivity. The Moderate Resolution Imaging Spectroradiometer (MODIS) offers a unique combination of spectral, temporal, and spatial resolution compared to previous global sensors, making it a good candidate for large-scale crop type mapping. However, because of subpixel heterogeneity, the application of traditional hard classification approaches to MODIS data may result in significant errors in crop area estimation. We developed and tested a linear unmixing approach with MODIS that estimates subpixel fractions of crop area based on the temporal signature of reflectance throughout the growing season. In this method, termed probabilistic temporal unmixing (PTU), endmember sets were constructed using Landsat data to identify pure pixels, and uncertainty resulting from endmember variability was quantified using Monte Carlo simulation. This approach was evaluated using Landsat classification maps in two intensive agricultural regions, the Yaqui Valley (YV) of Mexico and the Southern Great Plains (SGP). Performance of the mixture model varied depending on the scale of comparison, with R² ranging from roughly 50% for estimating crop area within individual pixels to greater than 80% for crop cover within areas over 10 km². The results of this study demonstrate the importance of subpixel heterogeneity in cropland systems, and the potential of temporal unmixing to provide accurate and rapid assessments of land cover distributions using coarse resolution sensors, such as MODIS.     

Landsat urban mapping based on a combined spectral-spatial methodology

Urban mapping using Landsat Thematic Mapper (TM) imagery presents numerous challenges. These include spectral mixing of diverse land cover components within pixels, spectral confusion with other land cover features such as fallow agricultural fields and the fact that urban classes of interest are of the land use and not the land cover category. A new methodology to address these issues is proposed. This approach involves, as a first step, the generation of two independent but rudimentary land cover products, one spectral-based at the pixel level and the other segment-based. These classifications are then merged through a rule-based approach to generate a final product with enhanced land use classes and accuracy. A comprehensive evaluation of derived products of Ottawa, Calgary and cities in southwestern Ontario is presented based on conventional ground reference data as well as inter-classification consistency analyses. Producer accuracies of 78% and 73% have been achieved for urban ‘residential’ and ‘commercial/industrial’ classes, respectively. The capability of Landsat TM to detect low density residential areas is assessed based on dwelling and population data derived from aerial photography and the 2001 Canadian census. For low population densities (i.e. below 3000 persons/km²), density is observed to be monotonically related to the fraction of pixels labeled ‘residential’. At higher densities, the fraction of pixels labeled ‘residential’ remains constant due to Landsat's inability to distinguish between high-rise apartment dwellings and commercial/industrial structures.     

Fractional forest cover mapping in the Brazilian Amazon with a combination of MODIS and TM images

High deforestation rates in Amazonia have motivated considerable efforts to monitor forest changes with satellite images, but mapping forest distribution and monitoring change at a regional scale remain a challenge. This article proposes a new approach based on the integrated use of Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat Thematic Mapper (TM) images to rapidly map forest distribution in Rondônia, Brazil. The TM images are used to differentiate forest and non-forest areas and the MODIS images are used to extract three fraction images (vegetation, shade and soil) with linear spectral mixture analysis (LSMA). A regression model is built to calibrate the MODIS-derived forest results. This approach is applied to the MODIS image in 2004 and is then transferred to other MODIS images. Compared to INPE PRODES (Brazil's Instituto Nacional de Pesquisas Espaciais – Programme for the Estimation of Deforestation in the Brazilian Amazon) data, the errors for total forest area estimates in 2000, 2004 and 2006 are??0.97%, 0.81% and??1.92%, respectively. This research provides a promising approach for mapping fractional forest (proportion of forest cover area in a pixel) distribution at a regional scale. The major advantage is that this procedure can rapidly provide the spatial and temporal patterns of fractional forest cover distribution at a regional scale by the integrated use of MODIS images and a limited number of Landsat images.     

Mapping regional land cover with MODIS data for biological conservation: Examples from the Greater Yellowstone Ecosystem, USA and Pará State, Brazil

The paper investigated the application of MODIS data for mapping regional land cover at moderate resolutions (250 and 500 m), for regional conservation purposes. Land cover maps were generated for two major conservation areas (Greater Yellowstone Ecosystem—GYE, USA and the Pará State, Brazil) using MODIS data and decision tree classifications. The MODIS land cover products were evaluated using existing Landsat TM land cover maps as reference data. The Landsat TM land cover maps were processed to their fractional composition at the MODIS resolution (250 and 500 m). In GYE, the MODIS land cover was very successful at mapping extensive cover types (e.g. coniferous forest and grasslands) and far less successful at mapping smaller habitats (e.g. wetlands, deciduous tree cover) that typically occur in patches that are smaller than the MODIS pixels, but are reported to be very important to biodiversity conservation. The MODIS classification for Pará State was successful at producing a regional forest/non-forest product which is useful for monitoring the extreme human impacts such as deforestation. The ability of MODIS data to map secondary forest remains to be tested, since regrowth typically harbors reduced levels of biodiversity. The two case studies showed the value of using multi-date 250 m data with only two spectral bands, as well as single day 500 m data with seven spectral bands, thus illustrating the versatile use of MODIS data in two contrasting environments. MODIS data provide new options for regional land cover mapping that are less labor-intensive than Landsat and have higher resolution than previous 1 km AVHRR or the current 1 km global land cover product. The usefulness of the MODIS data in addressing biodiversity conservation questions will ultimately depend upon the patch sizes of important habitats and the land cover transformations that threaten them.     

Determining the rate of forest conversion in Mato Grosso,Brazil, using Landsat MSS and AVHRR data

Abstract

AVHRR-LAC thermal data and Landsat MSS and TM spectral data were used to estimate the rate of forest clearing in Mato Grosso, Brazil, between 1981 and 1984. The Brazilian state was stratified into forest and non-forest. A list sampling procedure was used in the forest stratum to select Landsat MSS scenes for processing based on estimates of fire activity in the scenes. Fire activity in 1984 was estimated using AVHRR-LAC thermal data. Slate-wide estimates of forest conversion indicate that between 1981 and 1984, 353966 ha ±77 000 ha (0·4 percent of the state area) were converted per year. No evidence of reforestation was found in this digital sample. The relationship between forest clearing rate (based on MSS-TM analysis)and fire activity (estimated using AVHRR data)was noisy (R²= 0·41). The results suggest that AVHRR data may be put to better use as a stratification tool rather than as a subsidiary variable in list sampling.     

Phenological differences in Tasseled Cap indices improve deciduous forest classification

Remote sensing needs to clarify the strengths of different methods so they can be consistently applied in forest management and ecology. Both the use of phenological information in satellite imagery and the use of vegetation indices have independently improved classifications of north temperate forests. Combining these sources of information in change detection has been effective for land cover classifications at the continental scale based on Advanced Very High Resolution Radiometer (AVHRR) imagery. Our objective is to test if using vegetation indices and change analysis of multiseasonal imagery can also improve the classification accuracy of deciduous forests at the landscape scale. We used Landsat Thematic Mapper (TM) scenes that corresponded to Populus spp. leaf-on and Quercus spp. leaf-off (May), peak summer (August), Acer spp. peak color (September), Acer spp. and Populus spp. leaf-off (October). Input data files derived from the imagery were: (1) TM Bands 3, 4, and 5 from all dates; (2) Normalized Difference Vegetation Index (NDVI) from all dates; (3) Tasseled Cap brightness, greenness, and wetness (BGW) from all dates; (4) difference in TM Bands 3, 4, and 5 from one date to the next; (5) difference in NDVI from one date to the next; and (6) difference in BGW from one date to the next. The overall kappa statistics (KHAT) for the aforementioned classifications of deciduous genera were 0.48, 0.36, 0.33, 0.38, 0.26, 0.43, respectively. The highest accuracies occurred from TM Bands 3, 4, and 5 (61.0% for deciduous genera, 67.8% for all classes) or from the difference in BGW (61.0% for deciduous genera, 67.8% for all classes). However, the difference in Tasseled Cap classification more accurately separated deciduous shrubs and harvested stands from closed canopy forest. Our results indicate that phenological change of forest is most accurately captured by combining image differencing and Tasseled Cap indices.     

Leaf area index mapping in northern Canada

Leaf area index (LAI) is an important structural vegetation parameter that is commonly derived from remotely sensed data. It has been used as a reliable indicator for vegetation's cover, status, health and productivity. In the past two decades, various Canada-wide LAI maps have been generated by the Canada Centre for Remote Sensing (CCRS). These products have been produced using a variety of very coarse satellite data such as those from SPOT VGT and NOAA AVHRR satellite data. However, in these LAI products, the mapping of the Canadian northern vegetation has not been performed with field LAI measurements due in large part to scarce in situ measurements over northern biomes. The coarse resolution maps have been extensively used in Canada, but finer resolution LAI maps are needed over the northern Canadian ecozones, in particular for studying caribou habitats and feeding grounds.

In this study, a new LAI algorithm was developed with particular emphasis over northern Canada using a much finer resolution of remotely sensed data and in situ measurements collected over a wide range of northern arctic vegetation. A statistical relationship was developed between the in situ LAI measurements collected over vegetation plots in northern Canada and their corresponding pixel spectral information from Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) data. Furthermore, all Landsat TM and ETM+ data have been pre-normalized to NOAA AVHRR and SPOT VGT data from the growing season of 2005 to reduce any seasonal or temporal variations. Various spectral vegetation indices developed from the Landsat TM and ETM?+?data were analysed in this study. The reduced simple ratio index (RSR) was found to be the most robust and an accurate estimator of LAI for northern arctic vegetation. An exponential relationship developed using the Theil–Sen regression technique showed an R ² of 0.51 between field LAI measurement and the RSR. The developed statistical relationship was applied to a pre-existing Landsat TM 250 m resolution mosaic for northern Canada to produce the final LAI map for northern Canada ecological zones. Furthermore, the 250 m resolution LAI estimates, per ecological zone, were almost generally lower than those of the CCRS Canada-wide VGT LAI maps for the same ecozones. Validation of the map with LAI field data from the 2008 season, not used in the derivation of the algorithm, shows strong agreement between the in situ LAI measurement values and the map-estimated LAI values.     

Agreement assessment of NOAA/AVHRR NDVI with Landsat TM NDVI for mapping burned forested areas

Meteorological satellites are appropriate for operational applications related to early warning, monitoring and damage assessment of forest fires. Environmental or resources satellites, with better spatial resolution than meteorological satellites, enable the delineation of the affected areas with a higher degree of accuracy. In this study, the agreement of two datasets, coming from National Oceanic and Atmospheric Administration/Advanced Very High Resolution Radiometer (NOAA/AVHRR) and Landsat TM, for the assessment of the burned area, was investigated. The study area comprises a forested area, burned during the forest fire of 21-24 July 1995 in Penteli, Attiki, Greece. Based on a colour composite image of Landsat TM a reference map of the burned area was produced. The scatterplot of the multitemporal Normalized Difference Vegetation Index (NDVI) images, from both Landsat TM and NOAA/AVHRR sensors, was used to detect the spectral changes due to the removal of vegetation. The extracted burned area was compared to the digitized reference map. The synthesis of the maps was carried out using overlay techniques in a Geographic Information System (GIS). It is illustrated that the NOAA/AVHRR NDVI accuracy is comparable to that from Landsat TM data. As a result NOAA/AVHRR data can, operationally, be used for mapping the extent of the burned areas.     

Mapping the invasive species,Chinese tallow,with EO1 satellite Hyperion hyperspectral image data and relating tallow occurrences to a classified Landsat Thematic Mapper land cover map

Our objective was to provide a realistic and accurate representation of the spatial distribution of Chinese tallow (Triadica sebifera) in the Earth Observing 1 (EO1) Hyperion hyperspectral image coverage by using methods designed and tested in previous studies. We transformed, corrected, and normalized Hyperion reflectance image data into composition images with a subpixel extraction model. Composition images were related to green vegetation, senescent foliage and senescing cypress‐tupelo forest, senescing Chinese tallow with red leaves (‘red tallow’), and a composition image that only corresponded slightly to yellowing vegetation. These statistical and visual comparisons confirmed a successful portrayal of landscape features at the time of the Hyperion image collection. These landscape features were amalgamated in the Landsat Thematic Mapper (TM) pixel, thereby preventing the detection of Chinese tallow occurrences in the Landsat TM classification. With the occurrence in percentage of red tallow (as a surrogate for Chinese tallow) per pixel mapped, we were able to link dominant land covers generated with Landsat TM image data to Chinese tallow occurrences as a first step toward determining the sensitivity and susceptibility of various land covers to tallow establishment. Results suggested that the highest occurrences and widest distribution of red tallow were (1) apparent in disturbed or more open canopy woody wetland deciduous forests (including cypress‐tupelo forests), upland woody land evergreen forests (dominantly pines and seedling plantations), and upland woody land deciduous and mixed forests; (2) scattered throughout the fallow fields or located along fence rows separating active and non‐active cultivated and grazing fields, (3) found along levees lining the ubiquitous canals within the marsh and on the cheniers near the coastline; and (4) present within the coastal marsh located on the numerous topographic highs.