An evaluation of EO-1 hyperspectral Hyperion data for chlorophyll content and leaf area index estimation

Estimation of chlorophyll content and the leaf area index (LAI) using remote sensing technology is of particular use in precision agriculture. Wavelengths at the red edge of the vegetation spectrum (705 and 750 nm) were selected to test vegetation indices (VIs) using spaceborne hyperspectral Hyperion data for the estimation of chlorophyll content and LAI in different canopy structures. Thirty sites were selected for the ground data collection. The results show that chlorophyll content and LAI can be successfully estimated by VIs derived from Hyperion data with a root mean square error (RMSE) of 7.20–10.49 μg cm^?2 for chlorophyll content and 0.55–0.77 m² m^?2 for LAI. The special index derived from three bands provided the best estimation of the chlorophyll content (RMSE of 7.19 μg cm^?2 for the Modified Chlorophyll Absorption Ratio Index/Optimized Soil-Adjusted Vegetation Index (MCARI/OSAVI₇₀₅)) and LAI (RMSE of 0.55 m² m^?2 for a second form of the MCARI (MCARI2₇₀₅)). These results demonstrate the possibilities for analysing the variation in chlorophyll content and LAI using hyperspectral Hyperion data with bands from the red edge of the vegetation spectrum.     

The red edge position and shape as indicators of plant chlorophyll content,biomass and hydric status.

Some red edge parameters in the first derivative reflectance curve (wavelength, amplitude and area of the red edge peak) were studied to evaluate plant chlorophyll content, biomassand RelativeWater Content (RWC).Plants of Capsicum annuum and Phaseolus vulgaris under different nitrogen and water availabilities, and plants of Gerbera jamesonii with different hydric status were studied. A high correlation was found between chlorophyll content and the wavelength of the red edge peak (λ_re ), and between LAI (leaf area index)and the amplitude of the red edge peak (dr_{r e} ), but the area of the red edge peak (σ_680–780 nm) was the best estimator of LAI. Thus, red edge was found valuable for assessment of plant chlorophyll concentration and LAI, and therefore nutritional status. Water stress also affected dr_re, but only when the stress was well developed.     

Nondestructive estimation of canopy chlorophyll content using Hyperion and Landsat/TM images

Remote sensing offers a nondestructive tool for the quick and precise estimation of canopy chlorophyll content that serves as an important indicator of the plant ecosystem. In this study, the canopy chlorophyll content of 26 samples in 2007 and 40 samples in 2008 of maize were nondestructively estimated by a set of vegetation indices (VIs; Normalized Difference Vegetation Index, NDVI; Green Chlorophyll Index, CI_green; modified soil adjust vegetation index, MSAVI; and Enhanced Vegetation Index, EVI) derived from the hyperspectral Hyperion and Thematic Mapper (TM) images. The PROSPECT model was used for sensitivity analysis among the indices and results indicated that CI_green had a large linear correlation with chlorophyll content ranging from 100–1000 mg m^?2. EVI showed a moderate ability in avoiding saturation and reached a saturation of chlorophyll content above 600 mg m^?2. Both of the other two indices, MSAVI and NDVI, showed a clear saturation at chlorophyll content of 400 mg m^?2, which demonstrated they may be inappropriate for chlorophyll interpretation at high values. A validation study was also conducted with satellite observations (Hyperion and TM) and in-situ measurements of chlorophyll content in maize. Results indicated that canopy chlorophyll content can be remotely evaluated by VIs with r ² ranging from the lowest of 0.73 for NDVI to the highest of 0.86 for CI_green. EVI had a greater precision (r ²=0.81) than MASVI (r ²=0.75) in canopy chlorophyll content estimation. The results agreed well with the sensitivity study and will be helpful in developing future models for canopy chlorophyll evaluation.     

Hybrid atmospheric correction algorithms and evaluation on VNIR/SWIR Hyperion satellite data for soil organic carbon prediction

ABSTRACT

Visible near-infrared and shortwave infrared data acquired by spaceborne sensors contain atmospheric noise, along with target reflectance that may affect its end applications, e.g. geological, vegetation, soil surface studies, etc. Several atmospheric correction algorithms have been already developed to remove unwanted atmospheric components of a spectral signature of Earth targets obtained from airborne/spaceborne hyperspectral image. In spite of this, choosing of an appropriate atmospheric correction algorithm is an ongoing research. In this study, two hybrid atmospheric correction (HAC) algorithms incorporating a modified empirical line (EL_m) method were proposed. The first HAC model (named HAC_1) combines (i) a radiative transfer (RT) model based on the concepts of RT equations, which uses real-time in situ atmospheric and climatic data, and (ii) an EL_m technique. The second one (named HAC_2) combines (i) the well-known ATmospheric CORrection (ATCOR) model and (ii) an EL_m technique. Both HAC algorithms and their component single atmospheric correction algorithms (ATCOR, RT, and EL_m) were applied to radiance data acquired by Hyperion satellite sensor over study sites in Australia. The performances of both HAC algorithms were analysed in two ways. First, the Hyperion reflectances obtained by five atmospheric correction algorithms were analysed and compared using spectral metrics. Second, the performance of each atmospheric correction algorithm was analysed for prediction of soil organic carbon (SOC) using Hyperion reflectances obtained from atmospheric correction algorithms. The prediction model of SOC was built using partial least square regression model. The results show that (i) both the hybrid models produce a good spectrum with lower Spectral Angle Mapper and Spectral Information Divergence values and (ii) both hybrid algorithms provided better SOC prediction accuracy, in terms of coefficient of determination (R²), residual prediction deviation (RPD), and ratio of performance to interquartile (RPIQ), with R² ≥ 0.75, RPD ≥ 2, and RPIQ ≥ 2.58 than single algorithms. HAC algorithms, developed using EL_m technique, may be recommended for atmospheric correction of Hyperion radiance data, when archived Hyperion reflectance data have to be used for SOC prediction mapping.     

Canopy level estimations of chlorophyll and LAI for two tropical species (teak and bamboo) from Hyperion (EO1) data

Current economic development in tropical regions (especially in India, China, and Brazil) is putting tremendous pressure on tropical forest cover. Some of the dominant and economically important species are planted at large scale in these countries. Teak and bamboo are two important species of tropical regions because of their commercial and conservation values. Accurate estimates of foliar chemistry can help in evaluating the health status of vegetation in these regions. An attempt has been made to derive canopy level estimation of chlorophyll and leaf area index (LAI) for these species utilizing Hyperion data. Partial least square (PLS) regression analysis was carried out to identify the correlation between measured parameters (chlorophyll and LAI) and Hyperion reflectance spectra. PLS regression identified 600–750 nm as a sensitive spectral region for chlorophyll and 1000–1507 nm for LAI. The PLS regression model tested in this study worked well for the estimation of chlorophyll (R ² = 0.90, root mean square error (RMSE) = 0.182 for teak and R ² = 0.84, RMSE = 0.113 for bamboo) and for the estimation of LAI (R ² = 0.87, RMSE = 0.425). The lower predictive error obtained indicates the robustness of the data set and also of the applicability of the PLS regression analysis. Wavelengths recognized by the PLS regression model were utilized for the development of vegetation indices for estimating chlorophyll and LAI. Predictive performances of the developed simple ratios (SRs) were evaluated using the cross-validation method. SR 743/692 gave the best results for the prediction of chlorophyll with the leave-one-out cross-validation (LOO-CV) method (R ² = 0.73, RMSE = 0.28 for teak and R ² = 0.71, RMSE = 0.15 for bamboo). The normalized difference ratio (ND 1457/1084) gave the best results for the prediction of LAI with LOO-CV (R ² = 0.66, RMSE = 0.57). Ratios developed here can be tested for teak and bamboo cover spread in tropical regions with similar environmental conditions.     

Estimating chlorophyll concentration in conifer needles with hyperspectral data: An assessment at the needle and canopy level

This investigation quantitatively links chlorophyll a + b (chl _a + b) concentration, a physiological marker of forest health condition, to hyperspectral observations of Jack Pine (Pinus banksiana), a dominant Boreal forest species. Compact Airborne Spectrographic Imager (CASI) observations, in the visible-near infrared domain, were acquired over eight selected Jack Pine sites, near Sudbury, Ontario, between June and September of 2001. Supplementing the airborne campaigns was concurrent on-site collection of foliage samples for laboratory spectral and chemical measurements. The study first connected needle-level optical properties with pigment concentration through the inversion of radiative transfer models, LIBERTY and PROSPECT. Next, a chlorophyll sensitive optical index (R750/R710), was “scaled-up” using SAILH, a turbid medium canopy model, to estimate total pigment content at the canopy-level. Due to the potential confounding effects of open canopy structure and foliage clumping, the analysis accordingly focused on high spatial resolution CASI imagery (1 m) to visually target tree crowns, while accounting for shadowed areas. Chl _a + b concentration estimation from airborne spectral data using coupled leaf and canopy models was shown to be feasible with a root mean square error of 5.3 μg/cm², for a pigment range of 25.7 to 45.9 μg/cm². Such predictive algorithms using airborne-level data provide the methodology to be potentially scaled-up to satellite-level hyperspectral platforms for large scale monitoring of vegetation productivity and forest stand condition.     

Retrieval of chlorophyll a concentration from a fluorescence enveloped area using hyperspectral data

It is acknowledged that fluorescence line height (FLH) algorithms are still hampered by the uncertainty of fluorescence peak position. The fluorescence peak moves to longer wavelengths with the increase of chlorophyll a concentration. In this article, the fluorescence enveloped area (FEA), which integrates the fluorescence height and the fluorescence peak position, was used to estimate the chlorophyll a concentration in the coastal waters of the Pearl River Estuary. The FEA algorithm was developed from in situ data of chlorophyll a concentration, total suspended matter (TSM) concentration and above-water remote sensing reflectance, which were collected at 37 sampling stations in the Pearl River Estuary during two cruises. The results showed that the FEA algorithm made a better estimation of chlorophyll a concentration compared with the widely used FLH algorithm and moving fluorescence line height (MFLH) algorithm. These three algorithms were applied to the Pearl River Estuary for retrieval of chlorophyll a concentration from Hyperion data acquired on 21 December 2006. Compared with the FLH and the MFLH, the FEA algorithm showed a rational distribution of the chlorophyll a concentration in the Pearl River Estuary.     

基于四波段半分析算法和Hyperion遥感影像反演太湖叶绿素a浓度

水体叶绿素a浓度不仅是水质状况的重要指标,也是制定水环境保护和水资源开发利用方案的重要依据。以2004年8月19日太湖水质浓度实验数据和同步的Hyperion影像为数据基础,研究适用于Hyperion影像的四波段半分析算法。由模型参数标定数据集(37组)对四波段半分析算法参数的拟合分析和模型检验数据集(5组)对算法精度的评估可知,基于指数拟合方法获取的四波段半分析算法具有较高的叶绿素a浓度估算精度(相关系数为0.8913,平均绝对误差为1.1109μg/L,对应的平均相对误差为5.69%,其对应的4个波段波长分别为671.02nm、701.55nm、711.72nm和742.25nm)。用以上四波段半分析算法从Hyperion影像中提取的叶绿素a浓度呈湖心低、沿湖区域高的格局。与22.23 μg/L的年均叶绿素a浓度相比较,2004年8月19日的叶绿素a浓度处于年际较高水平。     

H2 sensing properties of diode-type gas sensors fabricated with Ti- and/or Nb-based materials

A thermally oxidized TiO₂ or Nb₂O₅ film equipped with a top Pd film electrode and a bottom Ti or Nb plate electrode (Pd/MO(n)/M, MO: oxide film, M: metal plate, n: annealing temperature (°C)) has been investigated as a diode-type H₂ sensor under air or N₂ atmosphere. Pd/TiO₂(n)/Ti sensors showed relatively poor H₂ sensing properties in air, in comparison with Pd/anodic-TiO₂(n)/Ti sensors constructed with an anodized TiO₂ film equipped with a top Pd film electrode and a bottom Ti plate electrode, which were reported in our previous studies. On the other hand, Pd/Nb₂O₅(n)/Nb sensors showed relatively larger H₂ response with fast response and recovery speeds than Pd/TiO₂(n)/Ti sensors in air under high forward bias conditions. A Pd/Nb₂O₅(450)/Ti sensor, which was fabricated by radio-frequency magnetron sputtering of Nb metal on a Ti substrate followed by thermal oxidation at 450 °C, showed the largest H₂ response and relatively fast response and recovery speeds in air, among the sensors tested. In addition, H₂ response of the Pd/Nb₂O₅(450)/Ti sensor in air was much lower than that in N₂, but the logarithm of H₂ response was almost proportional to the logarithm of H₂ concentration in a wide range of H₂ concentration (10–8000 ppm) in air, and the H₂ sensitivity in air was much higher than that in N₂.     

Coupled correction and classification of hyperspectral imagery for mapping coral reefs of Agatti and Flat Islands,India

Among the various remote-sensing options available today to map ecomorphological classes of corals, hyperspectral remote sensing is one of the best options by virtue of its spectral capabilities, while high spatial resolution is a necessary condition to resolve finer morphological features spatially. Given high-spatial resolution data of equal to or better than 30 m, the discrimination capability of end-members of multi-/hyperspectral satellite data is dependent on the efficacy of the correction for atmospheric effects and the intervening water column. In this study, a coupled approach to account for oceanic and atmospheric radiative contributions, called the Coupled Ocean Atmosphere Radiative Transfer (COART), was applied to Earth Observing 1 (EO-1) mission Hyperion image data acquired over the coral reefs of Agatti Island in the Lakshadweep Islands, Arabian Sea and Flat Island in the Andaman Islands, Bay of Bengal, India. The paper presents an open-source approach to correct and perform unsupervised classification of Hyperion imagery using a custom-built software toolkit called HyperCorals. The study finds that Hyperion has sufficient capabilities for discrimination of a few ecomorphological classes and can be improved further by using coupled radiative transfer models. Correcting for the intervening water column helps in classifying submerged features. The k-means classification offers a simpler classification method to classify an image of a subset with 42 selected spectral channels of Hyperion in the visible and near infrared (VNIR) region than the traditional Iterative Self-Organizing Data Analysis Technique (ISODATA). The classification results using the cosine distance metric over 42 selected spectral channels of Hyperion in the VNIR region offer the potential to differentiate between various ecomorphological zones. The study also presents results from sensitivity analysis experiments and discusses the relative importance of three parameters: water column depth, bottom albedo, and chlorophyll concentration on the overall correction and classification of the imagery.     

A two-step optimization procedure for assessing water constituent concentrations by hyperspectral remote sensing techniques: An application to the highly turbid Venice lagoon waters

Over the past few years, the increased spectral and spatial resolution of remote sensing equipment has promoted the investigation of new techniques for inland and coastal water monitoring. The availability of new high-resolution data has allowed improvements in models based on the radiative transfer theory for assessing optical water quality parameters. In this study, we fine-tuned a physical model for the highly turbid Venice lagoon waters and developed an inversion technique based on a two-step optimization procedure appropriate for hyperspectral data processing to retrieve water constituent concentrations from remote data. In the first step, the solution of a linearized analytical formulation of the radiative transfer equations was found. In the second step, this solution was used to provide the initial values in a non-linear least squares-based method. This effort represents a first step in the construction of a feasible and timely methodology for Venice lagoon water quality monitoring by remote sensing, especially in view of the existing experimental hyperspectral satellite (Hyperion) and the future missions such as PRISMA, EnMap and HyspIRI. The optical properties of the water constituents were assessed on the basis of sea/lagoon campaigns and data from the literature. The water light field was shaped by an analytical formulation of radiative transfer equations and the application of numerical simulations (Hydrolight software). Once the optical properties of the Venice lagoon bio-optical model were validated, the inverse procedure was applied to local radiometric spectra to retrieve concentrations of chlorophyll, colored dissolved organic matter and tripton. The inverse procedure was validated by comparing these concentrations with those measured in the laboratory from in situ water samples, then it was applied to airborne (CASI and MIVIS) and satellite (Hyperion) sensors to derive water constituent concentration maps. The consistent results encourage the use of this procedure using future missions satellite (PRISMA, EnMap and HyspIRI).     

Hyperion, IKONOS, ALI, and ETM+ sensors in the study of African rainforests

The goal of this research was to compare narrowband hyperspectral Hyperion data with broadband hyperspatial IKONOS data and advanced multispectral Advanced Land Imager (ALI) and Landsat-7 Enhanced Thematic Mapper Plus (ETM+) data through modeling and classifying complex rainforest vegetation. For this purpose, Hyperion, ALI, IKONOS, and ETM+ data were acquired for southern Cameroon, a region considered to be a representative area for tropical moist evergreen and semi-deciduous forests. Field data, collected in near-real time to coincide with satellite sensor overpass, were used to (1) quantify and model the biomass of tree, shrub, and weed species; and (2) characterize forest land use/land cover (LULC) classes.The study established that even the most advanced broadband sensors (i.e., ETM+, IKONOS, and ALI) had serious limitations in modeling biomass and in classifying forest LULC classes. The broadband models explained only 13-60% of the variability in biomass across primary forests, secondary forests, and fallows. The overall accuracies were between 42% and 51% for classifying nine complex rainforest LULC classes using the broadband data of these sensors. Within individual vegetation types (e.g., primary or secondary forest), the overall accuracies increased slightly, but followed a similar trend. Among the broadband sensors, ALI sensor performed better than the IKONOS and ETM+ sensors.When compared to the three broadband sensors, Hyperion narrowband data produced (1) models that explained 36-83% more of the variability in rainforest biomass, and (2) LULC classifications with 45-52% higher overall accuracies. Twenty-three Hyperion narrowbands that were most sensitive in modeling forest biomass and in classifying forest LULC classes were identified and discussed.     

A new technique for extracting the red edge position from hyperspectral data: The linear extrapolation method

The position of the inflexion point in the red edge region (680 to 780 nm) of the spectral reflectance signature, termed the red edge position (REP), is affected by biochemical and biophysical parameters and has been used as a means to estimate foliar chlorophyll or nitrogen content. In this paper, we report on a new technique for extracting the REP from hyperspectral data that aims to mitigate the discontinuity in the relationship between the REP and the nitrogen content caused by the existence of a double-peak feature on the derivative spectrum. It is based on a linear extrapolation of straight lines on the far-red (680 to 700 nm) and NIR (725 to 760 nm) flanks of the first derivative reflectance spectrum. The REP is then defined by the wavelength value at the intersection of the two lines. The output is a REP equation, REP = − (c₁ − c₂) / (m₁ − m₂), where c₁ and c₂, and m₁ and m₂ represent the intercepts and slopes of the far-red and NIR lines, respectively. Far-red wavebands at 679.65 and 694.30 nm in combination with NIR wavebands at 732.46 and 760.41 nm or at 723.64 and 760.41 nm were identified as the optimal combinations for calculating nitrogen-sensitive REPs for three spectral data sets (rye canopy, and maize leaf and mixed grass/herb leaf stack spectra). REPs extracted using this new technique (linear extrapolation method) showed high correlations with a wide range of foliar nitrogen concentrations for both narrow and wider bandwidth spectra, being comparable with results obtained using the traditional linear interpolation, polynomial and inverted Gaussian fitting techniques. In addition, the new technique is simple as is the case with the linear interpolation method, but performed better than the latter method in the case of maize leaves at different developmental stages and mixed grass/herb leaves with a low nitrogen concentration.     

Empirical studies of separability and prediction using threshold logic units

Several properties of threshold logic units (TLU's) were studied by actual training on vectors filled with random numbers (a Gaussian distribution). Trends have been observed relating predictive ability to the training set size (N)/dimensionality (D) ratio and also linking the degree of category set overlap to the frequency with which subsets are successfully trained. The results further suggest that predictive ability may not change significantly over wide ranges of D providing the N/D ratio is constant and greater than two or three.     

Random forest regression and spectral band selection for estimating sugarcane leaf nitrogen concentration using EO-1 Hyperion hyperspectral data

Nitrogen (N) is one of the most important limiting nutrients for sugarcane production. Conventionally, sugarcane N concentration is examined using direct methods such as collecting leaf samples from the field followed by analytical assays in the laboratory. These methods do not offer real-time, quick, and non-destructive strategies for estimating sugarcane N concentration. Methods that take advantage of remote sensing, particularly hyperspectral data, can present reliable techniques for predicting sugarcane leaf N concentration. Hyperspectral data are extremely large and of high dimensionality. Many hyperspectral features are redundant due to the strong correlation between wavebands that are adjacent. Hence, the analysis of hyperspectral data is complex and needs to be simplified by selecting the most relevant spectral features. The aim of this study was to explore the potential of a random forest (RF) regression algorithm for selecting spectral features in hyperspectral data necessary for predicting sugarcane leaf N concentration. To achieve this, two Hyperion images were captured from fields of 6–7 month-old sugarcane, variety N19. The machine-learning RF algorithm was used as a feature-selection and regression method to analyse the spectral data. Stepwise multiple linear (SML) regression was also examined to predict the concentration of sugarcane leaf N after the reduction of the redundancy in hyperspectral data. The results showed that sugarcane leaf N concentration can be predicted using both non-linear RF regression (coefficient of determination, R ²?=?0.67; root mean square error of validation (RMSEV)?=?0.15%; 8.44% of the mean) and SML regression models (R ²?=?0.71; RMSEV?=?0.19%; 10.39% of the mean) derived from the first-order derivative of reflectance. It was concluded that the RF regression algorithm has potential for predicting sugarcane leaf N concentration using hyperspectral data.     

Assessment of water quality in Lake Garda (Italy) using Hyperion

For testing the integration of the remote sensing related technologies into the water quality monitoring programs of Lake Garda (the largest Italian lake), the spatial and spectral resolutions of Hyperion and the capability of physics-based approaches were considered highly suitable. Hyperion data were acquired on 22nd July 2003 and water quality was assessed (i) defining a bio-optical model, (ii) converting the Hyperion at-sensor radiances into subsurface irradiance reflectances, and (iii) adopting a bio-optical model inversion technique. The bio-optical model was parameterised using specific inherent optical properties of the lake and light field variables derived from a radiative transfer numerical model. A MODTRAN-based atmospheric correction code, complemented with an air/water interface correction was used to convert Hyperion at-sensor radiances into subsurface irradiance reflectance values. These reflectance values were comparable to in situ reflectance spectra measured during the Hyperion overpass, except at longer wavelengths (beyond 700 nm), where reflectance values were contaminated by severe atmospheric adjacency effects. Chlorophyll-a and tripton concentrations were retrieved by inverting two Hyperion bands selected using a sensitivity analysis applied to the bio-optical model. The sensitivity analysis indicated that the assessment of coloured dissolved organic matter was not achievable in this study due to the limited coloured dissolved organic matter concentration range of the lake, resulting in reflectance differences below the environmental measurement noise of Hyperion. The chlorophyll-a and tripton image-products were compared to in situ data collected during the Hyperion overpass, both by traditional sampling techniques (8 points) and by continuous flow-through systems (32 km). For chlorophyll-a the correlation coefficient between in situ point stations and Hyperion-inferred concentrations was 0.77 (data range from 1.30 to 2.16 mg m^− 3). The Hyperion-derived chlorophyll-a concentrations also match most of the flow-through transect data. For tripton, the validation was constrained by variable re-suspension phenomena. The correlation coefficient between in situ point stations and Hyperion-derived concentrations increased from 0.48 to 0.75 (data range from 0.95 to 2.13 g m^− 3) if the sampling data from the re-suspension zone was avoided. The comparison of Hyperion-derived tripton concentrations and flow-through transect data exhibited a similar mismatch. The results of this research suggest further studies to address compatibilities of validation methods for water body features with a high rate of change, and to reduce the contamination by atmospheric adjacency effects on Hyperion data at longer wavelengths in Alpine environment. The transferability of the presented method to other sensors and the ability to assess water quality independent from in situ water quality data, suggest that management relevant applications for Lake Garda (and other subalpine lakes) could be supported by remote sensing.     

Determination of chlorophyll concentration changes in Lake Garda using an image-based radiative transfer code for Landsat TM images

The distribution of phytoplankton chlorophyll concentration in Lake Garda (Italy) was estimated using Landsat Thematic Mapper (TM) data acquired at two different times, February 1992 and March 1993. To investigate the waterleaving radiance adequately, the contribution of the atmospheric path radiance reaching the sensor should be removed. In this work a completely image-based atmospheric correction method was applied by means of an inversion technique based on a simplified radiative transfer code (RTC). A semi-empirical approach of relating atmospherically corrected TM spectral reflectances to in situ measurements through regression analysis was used. Limnological parameters were measured near to the TM images dates; some of the in situ measurements were used to define algorithms relating chlorophyll concentration measurements to water surface reflectance and the others too were used to validate the results of the predictive model. The models developed, which performed better (r² = 0.818) when concentrations were higher than > 3.0 mg m³, were used to map chlorophyll concentration throughout the lake. Spatial distribution maps of chlorophyll concentration and concentration changes were produced with contour intervals of 1 mg m³.     

2D Bilinear programming for robust PID/DD controller design

A new design method of PID structured controllers to achieve robust performance is developed. Both robust stabilization and performance conditions are losslessly expressed by bilinear constraints in the proportional‐double derivative variable ( k _P, k _DD) and the integral‐derivative variable ( k _I, k _D). Therefore, the considered control design can be efficiently solved by alternating optimization between ( k _P, k _DD) and ( k _I, k _D), which is a 2D computationally tractable program. The proposed method works equally efficiently whenever even higher order differential or integral terms are included in PID control to improve its robustness and performance. Numerical examples are provided to show the viability of the proposed development. Copyright © 2016 John Wiley & Sons, Ltd.     

Detecting sugarcane ‘orange rust’ disease using EO-1 Hyperion hyperspectral imagery

This Letter evaluates several narrow-band indices from EO-1 Hyperion imagery in discriminating sugarcane areas affected by ‘orange rust’ (Puccinia kuehnii) disease. Forty spectral vegetation indices (SVIs), focusing on bands related to leaf pigments, leaf internal structure, and leaf water content, were generated from an image acquired over Mackay, Queensland, Australia. Discriminant function analysis was used to select an optimum set of indices based on their correlations with the discriminant function. The predictive ability of each index was also assessed based on the accuracy of classification. Results demonstrated that Hyperion imagery can be used to detect orange rust disease in sugarcane crops. While some indices that only used visible near-infrared (VNIR) bands (e.g. SIPI and R800/R680) offer separability, the combination of VNIR bands with the moisture-sensitive band (1660?nm) yielded increased separability of rust-affected areas. The newly formulated ‘Disease–Water Stress Indices' (DWSI-1=R800/R1660; DSWI-2=R1660/R550; DWSI-5=(R800+R550)/(R1660+R680)) produced the largest correlations, indicating their superior ability to discriminate sugarcane areas affected by orange rust disease.