A finite element based model for electrochemical discharge machining in discharge regime

Electrochemical discharge machining (ECDM) is a promising hybrid process for high-performance machining of non-conductive glass. ECDM drilling has been found to have different characteristics and material removal mechanisms in discharge regime (less than 300???m in depth) and hydrodynamic regime (more than 300???m in depth); however, these regimes are never separately modeled in existing ECDM models, which leads to large prediction error, especially at low applied voltages and high machining depths. Until now, no model is particularly designed for discharge regime, where most material is removed. In this paper, a finite element based model for ECDM drilling in discharge regime is presented. Material removal subjected to a single spark was simulated using finite element method. The drilling depth evolution in discharge regime was predicted. The model predictions were compared with experimental results for validation. The fraction of power transferred to workpiece was found to be about 29% in discharge regime.     

Single discharge thermo-electrical modeling of micromachining mechanism in electric discharge machining

In this study, single discharge thermo-electrical model of workpiece material removal in electrical discharge machining (EDM) was developed. Developed model includes generation of energy in liquid media, variation of plasma channel radius and transfer of heat from the channel by the electrical discharge. Effect of generated energy in plasma channel on workpiece removal was theoretically investigated by using different experimental parameters used in literature. The developed model finds the temperature distribution in the workpiece material using finite element solver ANSYS Workbench (v.11) software. It’s assumed that the workpiece material reaches the melting point of workpiece material was removed from the surface. Electrical discharge process was simulated by using transient thermal analysis. The developed model has also been validated by comparing the theoretically obtained material removal values with the experimental ones.     

MICRO ELECTRICAL DISCHARGE MACHINING DEPOSITION IN AIR

A new deposition method is described using micro electrical discharge machining (EDM) to deposit tool electrode material on workpiece in air. The basic principles of micro electrical discharge deposition (EDD) are analyzed and the realized conditions are predicted. With an ordinary EDM shaping machine, brass as the electrode, high-speed steel as the workpiece, a lot of experiments are carried out on micro EDD systematically and thoroughly. The effects of major processing parameters, such as the discharge current, discharge duration, pulse interval and working medium, are obtained. As a result, a micro cylinder with 0.19 mm in diameter and 7.35 mm in height is deposited. By exchanging the polarities of the electrode and workpiece the micro cylinder can be removed selectively. So the reversible machining of deposition and removal is achieved, which breaks through the constraint of traditional EDM. Measurements show that the deposited material is compact and close to workpiece base, whose components depend on the tool electrode material.     

Parametric analysis on electrochemical discharge machining of silicon nitride ceramics

The electrochemical discharge machining (ECDM) process has a potential in the machining of silicon nitride ceramics. This paper describes the development of a second order, non-linear mathematical model for establishing the relationship among machining parameters, such as applied voltage, electrolyte concentration and inter-electrode gap, with the dominant machining process criteria, namely material removal rate (MRR), radial overcut (ROC) and thickness of heat affected zone (HAZ), during an ECDM operation on silicon nitride. The model is developed based on response surface methodology (RSM) using the relevant experimental data, which are obtained during an ECDM micro-drilling operation on silicon nitride ceramics. We also offer an analysis of variance (ANOVA) and a confirmation test to verify the fit and adequacy of the developed mathematical models. From the parametric analyses based on mathematical modelling, it can be recommended that applied voltage has more significant effects on MRR, ROC and HAZ thickness during ECDM micro-drilling operation as compared to other machining parameters such as electrolyte concentration and inter-electrode gap.     

Grinding-aided electrochemical discharge machining of particulate reinforced metal matrix composites

A grinding-aided electrochemical discharge machining (G-ECDM) process has been developed to improve the performance of the conventional ECDM process in machining particulate reinforced metal matrix composites (MMCs). The G-ECDM process functions under a combined action of electrochemical dissolution, spark erosion, and direct mechanical grinding. The tool electrode has a coating containing a hard reinforcement phase of diamond particles. The MMC employed in this study was Al₂O₃ particulate reinforced aluminum 6061 alloy. The material removal mechanism of this hybrid process has been analyzed. The results showed that the grinding action can effectively remove re-cast material deposited on the machining surface. The surface roughness (R _a) measured for the G-ECDM specimen was ten times smaller than that of the specimen machined without grinding aid (i.e., ECDM alone). Moreover, the material removal rate (MRR) of G-ECDM was about three times higher than that of ECDM under the experimental conditions of this study. The voltage waveform and crater distribution were also analyzed, and the experimental results showed that the G-ECDM process operates in a stable condition. The relative importance of the various processing parameters on MRR was established using orthogonal analysis. The results showed that MRR is influenced by the machining parameters in the order of duty cycle?>?current?>?electrolyte concentration. This study showed that the G-ECDM process is superior to the ECDM process for machining particulate reinforced MMCs, where a higher machining efficiency and a better surface quality can be obtained.     

A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate

The concept of electrochemical discharge machining (ECDM), also known as electrochemical spark machining (ECSM), was presented for the first time in 1968. Since then, this technology remains as research topic and was never explained seriously for industrial applications. The ECDM is a non-traditional machining technology used for machining of electrically non-conducting materials like glass, ceramics, quartz, etc. The literature reveals that the concept of mechanism of material removal in this machining process is not yet understood well. However, phenomena involved in the material removal needs to be investigated well in order to improve the process. In this paper, the concept of mechanism of material removal in ECDM is reviewed till date; scopes for further research have been identified. Possible future efforts to enhance the material removal rate in ECDM are also discussed.     

空气中微细电火花沉积的工艺规律研究

论述了一种新的电火花加工方法，它通过合理选择工艺条件在空气中将金属材料放电沉积在工件上。对电火花沉积加工的基本原理进行了分析，预测了实现条件，使用通用的电火花成形加工机床和常见的电极材料黄铜，在空气介质中，通过大量实验对微细电火花沉积进行了系统研究，得出各工艺参数的影响规律。在高速钢工件表面沉积出直径为0．19mm、高度为7.35mm的微小圆柱体。对沉积材料的测试表明，沉积材料致密，与基体结合紧密，成分取决于工具电极材料，同时基体硬度得到提高。     

Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining

Micro-electrochemical discharge machining (ECDM) was studied in order to improve the machining of 3D micro-structures of glass. To minimize structures and obtain good surface microstructures, the effects of the electrolyte, the pulse on/off-time ratio, the voltage, the feedrate, the rotational speed, and the electrolyte concentration in the drilling and milling processes were studied.In ECDM, voltage is applied to generate a gas film and sparks on a tool electrode; however, high voltage produces poor machining resolution. To obtain a stable gas film over the whole surface of the tool at a low voltage, a new mechanical contact detector, based on a loadcell, was used; the immersion depth of the tool electrode in the electrolyte was reduced as much as possible. In this study, various micro-structures less than 100 μm in size, such as Ø 60 μm micro-holes, a 10 μm-thin wall, and a 3D micro-structure were fabricated to demonstrate the potential for micro-machining of glass by ECDM.     

Parametric analysis on electrochemical discharge machining of silicon nitride ceramics

The electrochemical discharge machining (ECDM) process has a potential in the machining of silicon nitride ceramics. This paper describes the development of a second order, non-linear mathematical model for establishing the relationship among machining parameters, such as applied voltage, electrolyte concentration and inter-electrode gap, with the dominant machining process criteria, namely material removal rate (MRR), radial overcut (ROC) and thickness of heat affected zone (HAZ), during an ECDM operation on silicon nitride. The model is developed based on response surface methodology (RSM) using the relevant experimental data, which are obtained during an ECDM micro-drilling operation on silicon nitride ceramics. We also offer an analysis of variance (ANOVA) and a confirmation test to verify the fit and adequacy of the developed mathematical models. From the parametric analyses based on mathematical modelling, it can be recommended that applied voltage has more significant effects on MRR, ROC and HAZ thickness during ECDM micro-drilling operation as compared to other machining parameters such as electrolyte concentration and inter-electrode gap.     

Influence of discharge energy on machining characteristics in EDM

The machining characteristics of electrical discharge machining (EDM) directly depend on the discharge energy which is transformed into thermal energy in the discharge zone. The generated heat leads to high temperature, resulting in local melting and evaporation of workpiece material. However, the high temperature also impacts various physical and chemical properties of the tool and workpiece. This is why extensive knowledge of development and transformation of electrical energy into heat is of key importance in EDM. Based on the previous investigations, analytical dependence was established between the discharge energy parameters and the heat source characteristics in this paper. In addition, the thermal properties of the discharged energy were experimentally investigated and their influence on material removal rate, gap distance, surface roughness and recast layer was established. The experiments were conducted using copper electrode while varying discharge current and pulse duration. Analysis and experimental research conducted in this paper allow efficient selection of relevant parameters of discharge energy for the selection of most favorable EDM machining conditions.     

Study of the current signal and material removal during ultrasonic-assisted electrochemical discharge machining

Electrochemical discharge machining (ECDM) is a cost-effective machining process used to shape non-conductive materials such as glass and ceramics. The process can overcome poor machinability of hard and brittle materials. Different types of physical phenomena can be added to the ECDM components to improve the machining efficiency. As the main target of this paper, ultrasonic vibration was integrated to the cathode of the ECDM process (UAECDM), which resulted in vibration concentration only to the machining zone. In order to design the experimental configuration, modal analysis was used. Machining speed was the main output of this investigation. Gas film and electric discharge were two main physical phenomena during ECDM. The thickness of gas film, location, and pattern of discharges were determined, experimentally. Also, current signal was a useful tool that could record significant details of involved mechanisms and phenomena during machining. Images of gas film showed that the application of ultrasonic vibration decreased the thickness of gas film by 65%. In addition, the vibration amplitude of 10 μm created the most uniform current signal, which had a considerable effect on the material removal rate (MRR). Results showed that all levels of vibration amplitude increased the machining speed during discharge and hydrodynamic regimes of the machining process.     

Study of high-efficiency electrical discharge machining-induced ablation machining of titanium alloy TC4 using a multi-function electrode

Aimed at overcoming the low efficiency of electrical discharge machining (EDM), and taking advantage of the characteristic that most metals can burn in oxygen, a new high-efficiency process is put forward: EDM-induced ablation machining (EDM-IAM) using multi-function electrode technology. EDM-IAM injects oxygen and dielectric fluid into the processing area through a dedicated channel of a multi-function electrode. The chemical energy caused by the reaction of metal and oxygen can much improve the material removal efficiency. To study the factors affecting the efficiency of the process, the ablation machining of a titanium alloy (TC4) using a multi-function electrode was carried out; analysis of the worked surface was done with scanning electron microscopy, X-ray diffraction, and discharge waveforms. The results show that the substances of the worked surface are mainly TiO, TiO_1.2, TiO₂, and smaller amounts of Ti₃O and other titanium oxides. Violent oxidation combustion reaction occurs during the ablation machining process. The processing efficiency of ablation machining can reach 347.7 mm³/min, which is 58.7 times that of normal EDM for the same processing conditions. The main reasons for the high material removal rate are the higher utilization rate of electric spark discharge energy, consumption of material by ablation, melting effect of combustion heat on the workpiece material, and forced chip removal effect by local explosion.     

Analysis of rotary electrical discharge machining characteristics in reversal magnetic field for copper-en8 steel system

The material removal rate (MRR), along with the electrode wear rate (EWR), plays an important role in analysing machine output during electrical discharge machining. This work focuses on the improvement of machine output by introducing an induced magnetic field on the workpiece during rotary electrical discharge machining (REDM) of EN-8 steel with a rotary copper electrode. The workpiece was placed inside the induced magnetic field, wherein polarity of the magnetic field gets reversed periodically. Using Taguchi’s recommended design of experiments, we initially conducted experiments with eight input parameters at different levels . Significant parameters were identified with the help of the signal-to-noise ratio and ANOVA. Finally, another set of experiments was conducted for analysis of the process and development of empirical expressions for MRR and EWR. Experimental results established that rotary electrical discharge machining with a polarity reversal magnetic field delivers better machining output than machining in a non-magnetic field. Thus, this work benefits the EDM process by reducing the machining costs and by producing better geometrical trueness on workpieces, as MRR increased and EWR decreased.     

Employing severe plastic deformation to the processing of electrical discharge machining electrodes

The tool electrode has a significant role in electrical discharge machining (EDM) performance, as it affects machining efficiency, surface quality and the geometrical accuracy of the machined component. This study presents a new approach for developing a pure copper electrode using severe plastic deformation (SPD) to enhance the machining characteristics during EDM. Equal channel angular pressing (ECAP) is selected because it is the most successful SPD method of processing bulk materials. Finite element analysis, microstructural assessment as well as nanoindentation tests are carried out to determine the behavior of pure copper after one and two ECAP passes. The effectiveness of EDM when using ECAP-treated electrodes is evaluated by introducing new techniques of measuring the volumetric overcut (VOC) and corner sharpness. In addition, tool wear rate (TWR), material removal rate (MRR), electrode wear ratio, surface roughness, surface crack density and the critical crack zone are studied. The results emphasize that an electrode subjected to one pass of ECAP can enhance the workpiece accuracy by decreasing the VOC and increasing corner sharpness by 13 and 66%, respectively. It is also revealed that the nanohardness enhancement following ECAP leads to lower TWR and electrode wear ratio. An investigation of the surface characteristics indicates a thinner recast layer is achieved when using one ECAP pass-treated electrode, which leads to 26% lower surface crack density.     

Molecular dynamics simulation of the material removal mechanism in micro-EDM

Electrical discharge phenomena in EDM occur in a very short time period and in a very narrow space, thus making both observation and theoretical analysis extremely difficult. For this reason, the material removal mechanism in EDM has yet to be understood clearly. In this paper, the forming process of discharge craters in three dimensions was simulated, and material removal mechanism in EDM was analyzed using Molecular Dynamics (MD). It was found that material removal mechanism in EDM can be explained in two ways; one by vaporization and the other by the bubble explosion of superheated metals. It was also found that the metal removal efficiency is 0.02-0.05, leaving most of the melted pool resolidified. In addition, the influence of power density on the removal process was investigated, and the results showed that as the power density increases, the diameter and depth of the melted area increase, as does the metal removal efficiency. In this study, the forming mechanism of the bulge around discharge craters was also analyzed, and it was found that bulge is formed due to two mechanisms. The first is the shearing flow of the molten material caused by the extremely high pressure in the superheated material, and the second is the accumulation of the ejected material on the bulge formed by the first forming mechanism. It was also found that existence of micro pores in the workpiece material increases the depth of the discharge crater and melted area, thereby increasing the machining surface roughness. Simulation of the distribution of removed materials in the gap showed that some part of the removed material becomes debris ejected from the gap, while another part settles on the surface of the opposite electrode, and the last part returns to the surface of the electrode from which it was ejected.     

Study on the characteristics of plasma channel based on multi-spark pulse discharge machining effect

Plasma channel characteristics and energy distribution in electrical discharge machining (EDM) were mostly studied by analyzing the geometry parameters of craters caused by a single pulse discharge in previous studies. However, single pulse experiments cannot provide us insights into superposition, migration, abruption, interruption, and other phenomena of the plasma channel which have significant effects on EDM. Besides, EDM itself is a consecutive pulse discharge process. Thus, this paper focuses on the characteristics of plasma channel and the mechanism of material removal based on experimental data from multi-spark pulse discharge machining. The contrastive milling experiments of different parameters in multi-spark pulse discharge machining in high-speed dry EDM by using nickel-based superalloy as workpiece were conducted. The effects of peak current, dielectric type, breakdown voltage, air pressure, and electrode rotation speed on the crater number, crater distance, crater depth, and crater removal volume were studied. The plasma channel characteristics and material removal mechanism in continuous machining of high-speed dry EDM were revealed.     

Experimental research on effects of process parameters on servo scanning 3D micro electrical discharge machining

Servo scanning 3D micro electrical discharge machining (3D SSMEDM) is a novel and effective method in fabricating complex 3D micro structures with high aspect ratio on conducting materials.In 3D SSMEDM process,the axial wear of tool electrode can be compensated automatically by servo-keeping discharge gap,instead of the traditional methods that depend on experiential models or intermittent compensation.However,the effects of process parameters on 3D SSMEDM have not been reported up until now.In this study,the emphasis is laid on the effects of pulse duration,peak current,machining polarity,track style,track overlap,and scanning velocity on the 3D SSMEDM performances of machining efficiency,processing status,and surface accuracy.A series of experiments were carried out by machining a micro-rectangle cavity (900 μm×600 μm) on doped silicon.The experimental results were obtained as follows.Peak current plays a main role in machining efficiency and surface accuracy.Pulse duration affects obviously the stability of discharge state.The material removal rate of cathode processing is about 3/5 of that of anode processing.Compared with direction-parallel path,contour-parallel path is better in counteracting the lateral wear of tool electrode end.Scanning velocity should be selected moderately to avoid electric arc and short.Track overlap should be slightly less than the radius of tool electrode.In addition,a typical 3D micro structure of eye shape was machined based on the optimized process parameters.These results are beneficial to improve machining stability,accuracy,and efficiency in 3D SSMEDM.     

Advantages of carbon nanotubes in electrical discharge machining

Carbon nanotubes (CNTs) have a small specific gravity and a straight-pin shape, which allow them to continuously float and to uniformly disperse throughout the entire dielectric-filled cavity with little agglomeration during electrical discharge machining (EDM). In the past, powder mixtures of silicon, aluminum, and chrome have been used in the EDM process. However, there are concerns about flushing the controlled gap between the electrode and the workpiece because of their heavy specific gravity and their associated non-uniform dispersion in the dielectric. In this study, the effect of adding CNT powders to the dielectric on the surface integrity and the machining efficiency of the workpiece were investigated. CNTs can avoid the agglomeration problem. The CNTs were fabricated by chemical vapor deposition and added to the dielectric at a concentration of 0.4?g/l. The average surface roughness of 0.09?μm was achieved within 1.2?h, and the material defects of the recast layer and the micro-cracks were considerably reduced. The adopted processing parameters were a negative electrode polarity, a discharge current of 1?A, a pulse duration of 2?μs, an open-circuit voltage of 280?V, and gap voltage of 70?V. This technology improved the surface finish by 70% and the machining time by 66%. The achievement is attributed to the nanoscale characteristics of the CNTs in the dielectrics. The surface force became large and was able to balance the gravity body force of the CNTs. Consequently, the electric arcs were well dispersed and more uniform across the electrode gap, thus significantly enhancing the performance of the electrical discharge. It is expected that carbon nanotubes will be used in many EDM applications.     

Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process

This paper describes the influence of the discharge current and the pulse duration on the titanium carbide (TiC) deposition process by electrical discharge machining (EDM) with titanium (Ti) powder suspended in working oil. Although the influence of the electrical conditions for removal EDM has been investigated, the criteria for deposition have not been discussed. In the experiments, a 1-mm copper rod was used for an electrode to prevent the flushing of working oil from the gap between the electrode and a workpiece. Ti powder reacted with the cracked carbon from the working oil, then depositing a TiC layer on a workpiece surface. A major criterion of the deposition or removal was the discharge energy over a pulse duration of 10 μs. A thickness of the TiC layer became the maximum at a certain discharge current and pulse duration. Larger discharge energy and power promoted the removal by heat and pressure caused by the discharge. The removal was classified further into two patterns; cracks were observed on the Ti-rich surface in removal pattern 1 and a workpiece was simply removed in removal pattern 2. The maximum hardness of the deposition was 2000 Hv. The workpiece about 10 μm beneath its surface was also hardened because of the dispersion of TiC. The machining conditions for the hardest deposition did not coincide with those for the highest one. Therefore, the discharge current and pulse duration should be optimized for the deposition.     

Novel methods for high-speed observation of material removal and molten pool movement in EDM

This paper proposes two new methods to observe discharge phenomena without interference from the plasma in electrical discharge machining. The first method uses a bandpass filter with a bandwidth of 800–820 nm and laser illumination with a wavelength of 800–820 nm. The second method also uses a bandpass filter with a bandwidth of 800–820 nm; however, in this method, the tungsten material is used not only as the tool electrode but also as the illumination source. First, the discharge process was observed using traditional methods to investigate the influence of the plasma on the observation of the discharge process. Then, the process of removing molten material from both the tool electrode and workpiece, as well as molten pool movement, was observed using the first method proposed in this paper. The material removed from the tool electrode was scattered upward along the end profile of the tool electrode, while the material removed from the workpiece was distributed along the horizontal direction. To explain these phenomena, the flow distribution in the gap was qualitatively analyzed using a fluid simulation. Finally, the discharge process was also observed using the second method proposed in this paper. A tungsten tool electrode can emit light with a wavelength of 800–820 nm, which shines on the observed region during the discharge process. The observation results verified the phenomenon of multiple explosions of the molten pool during the discharge process. Moreover, it was found that the material removed by the explosion of the molten pool was scattered in different directions and hardly influenced by the flow distribution in the gap.