Poly-L-Lysine–Lactobionic Acid-Capped Selenium Nanoparticles for Liver-Targeted Gene Delivery

Liver cancer is currently regarded as the second leading cause of cancer-related mortality globally and is the sixth most diagnosed malignancy. Selenium nanoparticles (SeNPs) have attracted favorable attention as nanocarriers for gene therapy, as they possess beneficial antioxidant and anticancer properties. This study aimed to design, functionalize and characterize SeNPs to efficiently bind, protect and deliver pCMV–Luc DNA to hepatocellular carcinoma (HepG2) cells. The SeNPs were synthesized by ascorbic acid reduction and functionalized with poly-L-lysine (PLL) to stabilize and confer positive charges to the nanoparticles. The SeNPs were further decorated with lactobionic acid (LA) to target the asialoglycoprotein receptors abundantly expressed on the surface of the hepatocytes. All SeNPs were spherical, in the nanoscale range (<130 nm) and were capable of successfully binding, compacting and protecting the pDNA against nuclease degradation. The functionalized SeNP nanocomplexes exhibited minimal cytotoxicity (<30%) with enhanced transfection efficiency in the cell lines tested. Furthermore, the targeted SeNP (LA–PLL–SeNP) nanocomplex showed significant (* p < 0.05, ** p < 0.01, **** p < 0.0001) transgene expression in the HepG2 cells compared to the receptor-negative embryonic kidney (HEK293) cells, confirming receptor-mediated endocytosis. Overall, these functionalized SeNPs exhibit favorable features of suitable gene nanocarriers for the treatment of liver cancer.     

Electrochemical Determination of Food Preservative Nitrite with Gold Nanoparticles/p-Aminothiophenol-Modified Gold Electrode

Due to the negative impact of nitrate and nitrite on human health, their presence exceeding acceptable levels is not desired in foodstuffs. Thus, nitrite determination at low concentrations is a major challenge in electroanalytical chemistry, which can be achieved by fast, cheap, and safe electrochemical sensors. In this work, the working electrode (Au) was functionalized with p-aminothiophenol (p-ATP) and modified with gold nanoparticles (Au-NPs) to manufacture the final (Au/p-ATP-Au_nano) electrode in a two-step procedure. In the first step, p-ATP was electropolymerized on the electrode surface to obtain a polyaminothiophenol (PATP) coating. In the second step, Au/p-ATP-Au_nano working electrode was prepared by coating the surface with the use of HAuCl₄ solution and cyclic voltammetry. Determination of aqueous nitrite samples was performed with the proposed electrode (Au/p-ATP-Au_nano) using square wave voltammetry (SWV) in pH 4 buffer medium. Characteristic peak potential of nitrite samples was 0.76 V, and linear calibration curves of current intensity versus concentration was linear in the range of 0.5–50 mg·L⁻¹ nitrite with a limit of detection (LOD) of 0.12 mg·L⁻¹. Alternatively, nitrite in sausage samples could be colorimetrically determined with high sensitivity by means of p-ATP‒modified gold nanoparticles (AuNPs) and naphthylethylene diamine as coupling agents for azo-dye formation due to enhanced charge-transfer interactions with the AuNPs surface. The slopes of the calibration lines in pure NO₂⁻ solution and in sausage sample solution, to which different concentrations of NO₂⁻ standards were added, were not significantly different from each other, confirming the robustness and interference tolerance of the method. The proposed voltammetric sensing method was validated against the colorimetric nanosensing method in sausage samples.     

Chitosan-Coated Magnetic Nanoparticles Prepared in One Step by Reverse Microemulsion Precipitation

Chitosan-coated magnetic nanoparticles (CMNP) were obtained at 70 °C and 80 °C in a one-step method, which comprises precipitation in reverse microemulsion in the presence of low chitosan concentration in the aqueous phase. X-ray diffractometry showed that CMNP obtained at both temperatures contain a mixture of magnetite and maghemite nanoparticles with ≈4.5 nm in average diameter, determined by electron microscopy, which suggests that precipitation temperature does not affect the particle size. The chitosan coating on nanoparticles was inferred from Fourier transform infrared spectrometry measurements; furthermore, the carbon concentration in the nanoparticles allowed an estimation of chitosan content in CMNP of 6%–7%. CMNP exhibit a superparamagnetic behavior with relatively high final magnetization values (≈49–53 emu/g) at 20 kOe and room temperature, probably due to a higher magnetite content in the mixture of magnetic nanoparticles. In addition, a slight direct effect of precipitation temperature on magnetization was identified, which was ascribed to a possible higher degree of nanoparticles crystallinity as temperature at which they are obtained increases. Tested for Pb²⁺ removal from a Pb(NO₃)₂ aqueous solution, CMNP showed a recovery efficacy of 100%, which makes them attractive for using in heavy metals ion removal from waste water.     

An in situ spectroelectrochemical Raman investigation of Au electrodeposition and electrodissolution in KAu(CN)2 solution

Spectroelectrochemical behaviour of CN^– on a Au electrode in a KAu(CN)₂ bath at pH 6.3 was studied by in situ confocal Raman spectroscopy. Internal (CN stretch) and external (Au–CN) CN^–-related frequencies were investigated under potentiostatic control in a potential interval spanning cathodic and anodic ranges (–1800 to +1200 mV vs Ag/AgCl). Electrochemical behaviour was assessed by cyclic voltammetry. Stark-shifted Au–NC^– species are the dominating ones under cathodic polarization. Above the hydrogen evolution potential a Au–H stretch band can also be observed. At open circuit Au–CN^– species tend to prevail, while anodic conditions relate to the enhanced formation of Au(CN)₂ ^– and OCN^–.     

Maghemite, γ-Fe2O3, nanoparticles preparation via carbon-templated solution combustion synthesis

High surface area maghemite, γ-Fe₂O₃, nanoparticles were prepared via carbon-templated solution combustion synthesis, which is a two-step approach. Step one involves the combustion synthesis of maghemite nanoparticles embedded in an amorphous carbon matrix, by using a fuel rich reaction mixture of triethylenetetramine and iron nitrate. Step two consists of residual carbon removal by treating the previously-obtained composite precursor with hydrogen peroxide, which releases the maghemite nanopowder. This approach avoids carbon removal by thermal treatment, thus preserving the nanometric size of maghemite nanoparticles (8–12?nm), yielding a high specific surface area of 191.9?m²/g. At the same time, the final maghemite nanoparticles presented a superparamagnetic behavior and a saturation magnetization of 26.2?emu/g, in relation to the small particle size.     

Optimization of Synthesis Parameters for Mesoporous Shell Formation on Magnetic Nanocores and Their Application as Nanocarriers for Docetaxel Cancer Drug

In this work, Fe₃O₄@SiO₂ nanoparticles were coated with mesoporous silica shell by S⁻N⁺I⁻ pathway by using anionic surfactant (S⁻) and co-structure directing agent (N⁺). The role of co-structure directing agent (CSDA) is to assist the electrostatic interaction between negatively charged silica layers and the negatively charged surfactant molecules. Prior to the mesoporous shell formation step, magnetic cores were coated with a dense silica layer to prevent iron oxide cores from leaching into the mother system under any acidic circumstances. However, it was found that both dense and mesoporous coating parameters affect the textural properties of the produced mesoporous silica shell (i.e., surface area, pore volume and shell thickness). The synthesized Fe₃O₄@SiO₂@m-SiO₂ (MCMSS) nanoparticles have been characterized by low-angle X-ray diffraction, transmission electron microscopy (TEM), and N₂ adsorption-desorption analysis, and magnetic properties. The synthesized particles had dense and mesoporous silica shells of 8–37 nm and 26–50 nm, respectively. Furthermore, MCMSS possessed surface area of ca. 259–621 m²·g⁻¹, and pore volume of ca. 0.216–0.443 cc·g⁻¹. MCMSS showed docetaxcel cancer drug storage capacity of 25–33 w/w% and possessed control release from their mesochannels which suggest them as proper nanocarriers for docetaxcel molecules.     

Modification of Magnetite Nanoparticles with Triazine-Based Dendrons and Their Application as Drug-Transporting Systems

The following research aims at the synthesis of magnetite nanoparticles functionalized with triazine-based dendrons and the application of the obtained materials as effective sorptive materials dedicated to acidic bioactive compounds. The adopted synthetic approach involved: (1) the synthesis of nanosized Fe₃O₄ particles via classic co-precipitation method, (2) the introduction of amine groups on their surface leading to materials’ precursor, and (3) the final synthesis of branched triazine-based dendrons on the support surface by an iterative reaction between cyanuric chloride (CC) and piperazine (p) or diethylenetriamine (DETA) via nucleophilic substitution. The characterized materials were tested for their adsorptive properties towards folic acid, 18β–glycyrrhetinic acid, and vancomycin, showing high adsorption capacities varying in the ranges of 53.33–401.61, 75.82–223.71, and 68.17–132.45 mg g⁻¹, respectively. The formed material–drug complexes were also characterized for the drug-delivery potential, performed as in vitro release studies at pH 2.0 and 7.4, which mimics the physiological conditions. The release profiles showed that the proposed materials are able to deliver up to 95.2% of the drugs within 48 h, which makes them efficient candidates for further biomedical applications.     

Synergistic Effect of Maghemite and Titania Nanoparticles in PVA-Alginate Encapsulated Beads for Photocatalytic Reduction of Pb(II)

In this paper, maghemite (γ-Fe₂O₃) and titanium oxide (TiO₂) nanoparticles were synthesized by hydrothermal and coprecipitation methods, respectively. These nanoparticles were combined together in various ratios (1:10, 1:20, 1:60, 1:80, and 1) and embedded in polyvinyl alcohol (PVA)-alginate beads. These beads were tested for photocatalytic behavior in eliminating toxic Pb(II) from the aqueous solution. The photocatalytic experiments were performed under sunlight irradiation and without sunlight. Several operating conditions such as initial Pb(II) concentration, pH, contact time, and TiO₂: γ-Fe₂O₃ ratios were investigated to evaluate their effect on the process. The recycling attributes of these beads were also investigated. The results revealed that 100% of the Pb(II) was eliminated in 100 min at pH 7 under sunlight when the ratio of TiO₂:γ-Fe₂O₃ was kept to 1. The PVA-alginate maghemite and titania beads showed better efficiency for Pb(II) removal than PVA-alginate titania beads and PVA-alginate maghemite beads. X-ray photoelectron spectroscopy (XPS) analysis also revealed that Pb(II) removal was via photocatalytic reduction due to the presence of Pb(0) in the high-resolution scan at 130–160 eV. Also, the PVA-alginate titania and maghemite beads can be readily isolated from the aqueous solution after the photocatalytic process and reused for at least 6 times without significant losses in their initial properties. The reduction of Pb(II) with PVA-alginate titania and maghemite beads fitted the Langmuir–Hinshelwood (L–H) kinetic model at a correlation coefficient (R²) of 0.9923.     

Green synthesized Au–Ag bimetallic nanoparticles modified electrodes for the amperometric detection of hydrogen peroxide

Simple and eco-friendly electro deposition method was employed for the fabrication of Au–Ag bimetallic nanoparticles modified glassy carbon electrode. Nano Au–Ag film modified glassy carbon electrode surface morphology has been examined using atomic force microscopy. Electrodeposited Au–Ag bimetallic nanoparticles were found in the average size range of 15–50 nm. The electrochemical investigations of nano Au–Ag/1-butyl-3-methylimidazolium tetrafluoroborate-nafion film have been carried out using cyclic voltammetry and electrochemical impedance spectroscopy. The nano Au–Ag/1-butyl-3-methylimidazolium tetrafluoroborate-nafion film modified glassy carbon electrode holds the good electrochemical behavior and stability in pH 7.0 phosphate buffer solutions. The nano Au–Ag/1-butyl-3-methylimidazolium tetrafluoroborate-nafion modified glassy carbon electrode was successfully employed for the detection of H₂O₂ in the linear range of 1–250 μM in lab samples, and 1 × 10⁻³–2 × 10⁻² M in real samples, respectively.     

C60 aminofullerene-magnetite nanocomposite designed for efficient visible light photocatalysis and magnetic recovery

A magnetically recyclable photosensitizing system for harnessing solar energy for water treatment and disinfection is reported. This system comprises C₆₀ aminofullerene as a sensitizer for singlet oxygenation and functionalized mesoporous silica (msu-f SiO₂) encapsulating magnetite nanoparticles (msu-SiO₂/mag) as a magnetically separable host. Rapid degradation of furfuryl alcohol (FFA) (a singlet oxygen (¹O₂) probe) under visible-light irradiation along with the kinetic retardation of FFA decomposition in the presence of ¹O₂ quenchers suggests that the visible-light activity of C₆₀ aminofullerene-derivatized msu-SiO₂/mag (C₆₀/msu-SiO₂/mag) is related to the photosensitization of ¹O₂. On the other hand, the use of SiO₂ gel and fumed SiO₂ as magnetic supports drastically reduced the photosensitized generation of ¹O₂, which is ascribed to the absence of an ordered pore structure in the alternative silica support, resulting in an uncontrolled growth of Fe₃O₄ and an aggregation of the fullerenes on the SiO₂ gel and fumed SiO₂. Significant ¹O₂ production using C₆₀/msu-SiO₂/mag led to the effective oxidation of emerging pharmaceutical contaminants and inactivation of MS-2 bacteriophage under visible-light irradiation. Magnetic recovery and the subsequent reuse of the composite did not cause any significant loss in the photosensitizing activity of C₆₀/msu-SiO₂/mag, demonstrating its potential for catalytic applications.     

Synthesis and characterization of polysaccharide-maghemite composite nanoparticles and their antibacterial properties

The aim of this study was to obtain saccharide (dextran and sucrose)-coated maghemite nanoparticles with antibacterial activity. The polysaccharide-coated maghemite nanoparticles were synthesized by an adapted coprecipitation method. X-ray diffraction (XRD) studies demonstrate that the obtained polysaccharide-coated maghemite nanoparticles can be indexed into the spinel cubic lattice with a lattice parameter of 8.35 Å. The refinement of XRD spectra indicated that no other phases except the maghemite are detectable. The characterization of the polysaccharide-coated maghemite nanoparticles by various techniques is described. The antibacterial activity of these polysaccharide-coated maghemite nanoparticles (NPs) was tested against Pseudomonas aeruginosa 1397, Enterococcus faecalis ATCC 29212, Candida krusei 963, and Escherichia coli ATCC 25922 and was found to be dependent on the polysaccharide type. The antibacterial activity of dextran-coated maghemite was significantly higher than that of sucrose-coated maghemite. The antibacterial studies showed the potential of dextran-coated iron oxide NPs to be used in a wide range of medical infections.     

Synthesis of Gold-Platinum Core-Shell Nanoparticles Assembled on a Silica Template and Their Peroxidase Nanozyme Properties

Bimetallic nanoparticles are important materials for synthesizing multifunctional nanozymes. A technique for preparing gold-platinum nanoparticles (NPs) on a silica core template (SiO₂@Au@Pt) using seed-mediated growth is reported in this study. The SiO₂@Au@Pt exhibits peroxidase-like nanozyme activity has several advantages over gold assembled silica core templates (SiO₂@Au@Au), such as stability and catalytic performance. The maximum reaction velocity (V_max) and the Michaelis–Menten constants (K_m) were and 2.1 × 10⁻¹⁰ M⁻¹∙s⁻¹ and 417 µM, respectively. Factors affecting the peroxidase activity, including the quantity of NPs, solution pH, reaction time, and concentration of tetramethyl benzidine, are also investigated in this study. The optimization of SiO₂@Au@Pt NPs for H₂O₂ detection obtained in 0.5 mM TMB; using 5 µg SiO₂@Au@Pt, at pH 4.0 for 15 min incubation. H₂O₂ can be detected in the dynamic liner range of 1.0 to 100 mM with the detection limit of 1.0 mM. This study presents a novel method for controlling the properties of bimetallic NPs assembled on a silica template and increases the understanding of the activity and potential applications of highly efficient multifunctional NP-based nanozymes.     

Cloning,Expression and Characterization of a Thermostable Esterase HydS14 from Actinomadura sp. Strain S14 in Pichia pastoris

A thermostable esterase gene (hydS14) was cloned from an Actinomadura sp. S14 gene library. The gene is 777 bp in length and encodes a polypeptide of 258 amino acid residues with no signal peptide, no N-glycosylation site and a predicted molecular mass of 26,604 Da. The encoded protein contains the pentapeptide motif (GYSLG) and catalytic triad (Ser88-Asp208-His235) of the esterase/lipase superfamily. The HydS14 sequence shows 46%–64% identity to 23 sequences from actinomycetes (23 α/β-hydrolases), has three conserved regions, and contains the novel motif (GY(F)SLG), which distinguishes it from other clusters in the α/β-hydrolase structural superfamily. A plasmid containing the coding region (pPICZαA-hydS14) was used to express HydS14 in Pichia pastoris under the control of the AOXI promoter. The recombinant HydS14 collected from the supernatant had a molecular mass of ~30 kDa, which agrees with its predicted molecular mass without N-glycosylation. HydS14 had an optimum temperature of approximately 70 °C and an optimum pH of 8.0. HydS14 was stable at 50 and 60 °C for 120 min, with residual activities of above 80% and above 90%, respectively, as well as 50% activity at pH 6.0–8.0 and pH 9.0, respectively. The enzyme showed higher activity with p-nitrophenyl-C2 and C4. The K_m and V_max values for p-nitrophenyl-C4 were 0.21 ± 0.02 mM and 37.07 ± 1.04 μmol/min/mg, respectively. The enzyme was active toward short-chain p-nitrophenyl ester (C2–C6), displaying optimal activity with p-nitrophenyl-C4 (K_cat/K_m = 11.74 mM⁻¹·S⁻¹). In summary, HydS14 is a thermostable esterase from Actinomadura sp. S14 that has been cloned and expressed for the first time in Pichia pastoris.     

Reaction of N-Acetylcysteine with Cu2+: Appearance of Intermediates with High Free Radical Scavenging Activity: Implications for Anti-/Pro-Oxidant Properties of Thiols

We studied the kinetics of the reaction of N-acetyl-l-cysteine (NAC or RSH) with cupric ions at an equimolar ratio of the reactants in aqueous acid solution (pH 1.4–2) using UV/Vis absorption and circular dichroism (CD) spectroscopies. Cu²⁺ showed a strong catalytic effect on the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical (ABTSr) consumption and autoxidation of NAC. Difference spectra revealed the formation of intermediates with absorption maxima at 233 and 302 nm (ε₃₀₂/Cu > 8 × 10³ M⁻¹ cm⁻¹) and two positive Cotton effects centered at 284 and 302 nm. These intermediates accumulate during the first, O₂-independent, phase of the NAC autoxidation. The autocatalytic production of another chiral intermediate, characterized by two positive Cotton effects at 280 and 333 nm and an intense negative one at 305 nm, was observed in the second reaction phase. The intermediates are rapidly oxidized by added ABTSr; otherwise, they are stable for hours in the reaction solution, undergoing a slow pH- and O₂-dependent photosensitive decay. The kinetic and spectral data are consistent with proposed structures of the intermediates as disulfide-bridged dicopper(I) complexes of types cis-/trans-Cu^I₂(RS)₂(RSSR) and Cu^I₂(RSSR)₂. The electronic transitions observed in the UV/Vis and CD spectra are tentatively attributed to Cu(I) → disulfide charge transfer with an interaction of the transition dipole moments (exciton coupling). The catalytic activity of the intermediates as potential O₂ activators via Cu(II) peroxo-complexes is discussed. A mechanism for autocatalytic oxidation of Cu(I)–thiolates promoted by a growing electronically coupled –[Cu^I₂(RSSR)]_n– polymer is suggested. The obtained results are in line with other reported observations regarding copper-catalyzed autoxidation of thiols and provide new insight into these complicated, not yet fully understood systems. The proposed hypotheses point to the importance of the Cu(I)–disulfide interaction, which may have a profound impact on biological systems.     

Functionalized-carbon nanotube supported electrocatalysts and buckypaper-based biocathodes for glucose fuel cell applications

The preparation and testing for electrocatalytic activity of functionalized carbon nanotube (f-CNT) supported Pt and Au–Pt nanoparticles (NPs), and bilirubin oxidase (BOD), are reported. These materials were utilized as oxygen reduction reaction (ORR) cathode electrocatalysts in a phosphate buffer solution (0.2 M, pH 7.4) at 25 °C, in the absence and presence of glucose. Carbon monoxide (CO) stripping voltammetry was applied to determine the electrochemically active surface area (ESA). The ORR performance of the Pt/f-CNTs catalyst was high (specific activity of 80.9 μA cm_Pt⁻² at 0.8 V vs. RHE) with an open circuit potential within ca. 10 mV of that delivered by state-of-the-art carbon supported platinum catalyst and exhibited better glucose tolerance. The f-CNT support favors a higher electrocatalytic activity of BOD for the ORR than a commercially available carbon black (Vulcan XC-72R). These results demonstrate that f-CNTs are a promising electrocatalyst supporting substrate for biofuel cell applications.     

Design of High-Relaxivity Polyelectrolyte Nanocapsules Based on Citrate Complexes of Gadolinium(III) of Unusual Composition

Through nuclear magnetic relaxation and pH-metry, the details of the complexation of gadolinium(III) ions with citric acid (H₄L) in water and aqueous solutions of cationic polyelectrolytes are established. It is shown that the presence of poly(ethylene imine) (PEI) in solution affects magnetic relaxation behavior of gadolinium(III) complexes with citric acid (Cit) to a greater extent than polydiallyldimethylammonium chloride (PDDC). A large increase in relaxivity (up to 50 mM⁻¹s⁻¹) in the broad pH range (4–8) is revealed for the gadolinium(III)–citric acid–PEI system, which is particularly strong in the case of PEI with the molecular weight of 25 and 60 kDa. In weakly acidic medium (pH 3–7), the presence of PEI results in the formation of two tris-ligand associates [Gd(H₂L)₃]³⁻ and [Gd(H₂L)₂(HL)]⁴⁻, which do not exist in aqueous medium. In weakly alkaline medium (pH 7–10), formation of ternary complexes Gd(III)–Cit–PEI with the Gd(III)–to–Cit ratio of 1:2 is evidenced. Using transmission electron microscopy (TEM) and dynamic light scattering techniques (DLS), the formation of the particles with the size of 50–100 nm possessing narrow molecular-mass distribution (PDI 0.08) is determined in the solution containing associate of PEI with tris-ligand complex [Gd(H₂L)₂(HL)]⁴⁻.     

Periodic CO2 Dosing Strategy for Dunaliella salina Batch Culture

A periodic CO₂ dosing strategy for D. salina 19/30 batch culture is proposed. A model of periodic CO₂ dosing including dosing time calculation, dosing interval estimation and final chlorophyll yield prediction was established. In experiments, 5% CO₂/95% N₂ gas was periodically dosed into D. salina culture. Two different gas dosing flow rates were tested. The corresponding dosing time for each flow rate was estimated via the model (10 min·d⁻¹ for 0.7 L·min⁻¹ and 36 min·d⁻¹ for 0.3 L·min⁻¹). Daily pH measurements showed that the pH of these cultures dosed periodically was always kept between 7.5 and 9.5, which highlights that periodic gas supply can maintain a suitable range of pH for microalgal growth without expensive buffers. Notably the culture dosed for set daily intervals was seen to have similar growth to the culture supplied constantly, but with much higher CO₂ capture efficiency (11%–18%) compared to continuous dosing (0.25%). It shows great potential for using periodic gas supply to reduce cost, wasted gas and energy use.     

Development of Nickel- and Magnetite-Promoted Carbonized Cellulose Bead-Supported Bimetallic Pd–Pt Catalysts for Hydrogenation of Chlorate Ions in Aqueous Solution

Cellulose grains were carbonized and applied as catalyst supports for nickel- and magnetite-promoted bimetallic palladium- and platinum-containing catalysts. The bimetallic spherical aggregates of Pd and Pt particles were created to enhance the synergistic effect among the precious metals during catalytic processes. As a first step, the cellulose bead-based supports were impregnated by nitrate salts of nickel and iron and carbonized at 973 K. After this step, the nickel was in an elemental state, while the iron was in a magnetite form in the corresponding supports. Then, Pd and Pt particles were deposited onto the supports and the catalyst surface; precious metal nanoparticles (10–20 nm) were clustered inside spherical aggregated particles 500–600 nm in size. The final bimetallic catalysts (i.e., Pd–Pt/CCB, Pd–Pt/Ni–CCB, and Pd–Pt/Fe₃O₄–CCB) were tested in hydrogenation of chlorate ions in the aqueous phase. For the nickel-promoted Pd–Pt catalyst, a >99% chlorate conversion was reached after 45 min at 80 °C. In contrast, the magnetite-promoted sample reached an 84.6% chlorate conversion after 3 h. Reuse tests were also carried out with the catalysts, and in the case of Pd–Pt/Ni–CCB after five cycles, the catalytic activity only decreased by ~7% which proves the stability of the system.     

Construction of Z-scheme type CdS–Au–TiO2 hollow nanorod arrays with enhanced photocatalytic activity

The Z-scheme type CdS–Au–TiO₂ hollow nanorod arrays have been constructed on glass substrates by following these simple steps: firstly, highly ordered TiO₂ hollow nanorod arrays (THNAs) were synthesized by liquid phase deposition (LPD) using ZnO nanorod arrays as templates; then both Au core and CdS shell nanoparticles were achieved on the THNAs by in situ photodeposition. The prepared three-component films were characterized by field-emission scanning electron microscopy (FSEM), high-resolution transmission electron microscope (HRTEM), Raman scattering and ultraviolet–visible absorption spectrum. The results showed that Au–CdS core–shell nanoparticles were well dispersed on wall of anatase THNAs from top to bottom. The three-component nanojunction system was evaluated for their photocatalytic activity through the degradation of methylene blue (MB) in aqueous solution. It was found that the CdS–Au–TiO₂ three-component hollow nanorod arrays exhibited significantly enhanced photocatalytic activity compared with single (THNAs) and two components (Au-THNAs or CdS-THNAs) systems. Reasons for this enhanced photocatalytic activity were revealed by photoluminescence (PL) results of our samples.     

Self-assembly Ag2O nanoparticles into nanowires with the aid of amino-functionalized silica nanoparticles

This paper describes a novel self-assembly behavior of Ag₂O nanoparticles to Ag₂O nanowires. In the alkaline water-alcohol solution, Ag⁺ ions reacted with OH⁻ ions on silica nanoparticles functionalized by N-(2-aminoethyl)-3-aminopropyl-trimethoxy-silane (AEAPTS) to form Ag₂O nanoparticles. The Ag₂O nanoparticles further self-assembled into Ag₂O nanowires. The morphology of Ag₂O nanowires could be controlled by adjusting Ag/Si molar ratios in the systems. With low Ag/Si molar ratio, uniform Ag₂O nanowires were obtained with diameter of about 50 nm and length of tens micrometers. With the increase of Ag/Si molar ratio, Ag₂O nanowires became thicker, shorter and irregular. It was shown by high-resolution transmission electron microscopy (HRTEM) that all Ag₂O nanowires consisted of tiny Ag₂O nanoparticles with diameter of 10-20 nm. The self-assembly of Ag₂O nanoparticles into Ag₂O nanowires was observed by transmission electron microscopy (TEM) and the corresponding growth mechanism was proposed.