首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The goal of this paper is to describe a novel fault tolerant tracking control (FTTC) strategy based on robust fault estimation and compensation of simultaneous actuator and sensor faults. Within the framework of fault tolerant control (FTC) the challenge is to develop an FTTC design strategy for nonlinear systems to tolerate simultaneous actuator and sensor faults that have bounded first time derivatives. The main contribution of this paper is the proposal of a new architecture based on a combination of actuator and sensor Takagi-Sugeno (T-S) proportional state estimators augmented with proportional and integral feedback (PPI) fault estimators together with a T-S dynamic output feedback control (TSDOFC) capable of time-varying reference tracking. Within this architecture the design freedom for each of the T-S estimators and the control system are available separately with an important consequence on robust L 2 norm fault estimation and robust L 2 norm closed-loop tracking performance. The FTTC strategy is illustrated using a nonlinear inverted pendulum example with time-varying tracking of a moving linear position reference.  相似文献   

2.
四旋翼无人机姿态系统的非线性容错控制设计   总被引:1,自引:0,他引:1  
郝伟  鲜斌 《控制理论与应用》2015,32(11):1457-1463
本文研究了四旋翼无人机执行器发生部分失效时的姿态控制问题.通过分析其动力学特性,将执行器故障以乘性因子加入系统模型,得到执行器故障情况下四旋翼无人机的姿态动力学模型.在同时存在未知外部扰动和执行器故障的情况下,设计了一种基于自适应滑模控制的容错控制器.利用基于Lyapunov的分析方法证明了所设计控制器的渐近稳定性.在四旋翼无人机实验平台上进行了实验,验证了该算法对存在未知外部扰动和执行器部分失效时四旋翼无人机的姿态控制具有较好的鲁棒性.  相似文献   

3.
本文针对受到外界未知扰动和模型不确定性影响的倾转式三旋翼无人机,研究了其在尾部舵机发生堵塞故障时的容错控制问题.通过对倾转式三旋翼无人机姿态动力学特性的分析,将尾部舵机堵塞故障加入到力矩解算方程中.基于自适应反步法和非奇异终端滑模控制,提出了一种不需要故障诊断的鲁棒容错控制设计.利用基于Lyapunov的分析方法证明了闭环系统的稳定性,以及姿态误差的渐近收敛性质.通过在三旋翼无人机半实物仿真平台的实时实验以及与滑模控制器的对比,验证了该算法在无人机尾部舵机发生堵塞故障时,对姿态运动具有较好的控制效果.  相似文献   

4.
This paper investigates fault‐tolerant control (FTC) for feedback linearizable systems (FLSs) and its applications. The dynamic effects caused by the actuator faults on the feedback linearized model are firstly analyzed, which reveals that under actuator faults, the control input in the linearized model is affected by uncertain terms. In the framework of model reference control, the first FTC strategy is proposed as a robust controller, which achieves asymptotic tracking control of the FLS under actuator faults. A disadvantage of this strategy is that it relies on explicit information about several parameters in the actuator faults. This requirement is later relaxed by combining the robust FTC strategy with an adaptive technique to generate the adaptive FTC law, which is then improved to alleviate possible chattering of the actuator and estimation drifting of the adaptive parameter. Finally, the proposed FTC strategies are evaluated by reference command tracking control of a pendulum and an air‐breathing hypersonic vehicle under actuator faults. Simulation results demonstrate good tracking performance, which confirms effectiveness of the proposed strategies. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
This article focuses on the robust fault tolerant control (FTC) problem for a class of Lipschitz nonlinear multi-agent systems(MASs) subject to sensor faults. Firstly, sensor faults are transformed into actuator faults via introducing a new intermediate auxiliary state variable, and a distributed adaptive fault estimation observer is designed to estimate the state information and the concerned faults by using the relative output estimation error. Then, the sufficient existence conditions for the observer to satisfy the robust performance index are given. Thirdly, based on the results of observer design, a new design method of dynamic output feedback controller is proposed to implement consensus of MASs and ensure the desired disturbance rejection performance. Finally, the simulation results are presented to illustrate the effectiveness of the proposed method.  相似文献   

6.
7.
针对飞机舵面故障时产生的各种内部未建模动态、系统不确定参数、未知输入增益等问题,提出一种同时存在匹配/非匹配不确定性的多输入多输出飞机舵面故障$L_1$容错控制方法.首先,推导出等效线性参数时变模型;然后,基于投影算子提出$L_1$自适应容错控制方法,推导Lyapunov方程,并证明稳定性;最后,分析所提方法的瞬态和稳态性能.仿真结果验证了所提出方法良好的容错性、鲁棒性和稳定性,并保证了系统各参数的瞬态和稳态有界性.  相似文献   

8.
In this paper, an immersion and invariance (I&I) adaptive fault tolerant satellite attitude tracking control scheme is proposed. The proposed controller is capable of track the desired trajectory in the presence of unknown actuator multiplicative faults and unknown inertial matrix. Also based on Lyapunov direct method, all closed loop signals are proven to be globally asymptotically stable. The main advantage of this controller is improving closed loop performance while maintaining stability in the presence of unknown actuator faults. This method does not rely on certainty equivalence principle so it can be used to control the transient response of overall closed loop system by means of controlling the parameter estimation behavior which is not possible in traditional adaptive control. Numerical simulations are performed to demonstrate the effectiveness of proposed control scheme.  相似文献   

9.
Stochastic distribution control (SDC) is a new branch of stochastic system control that the system output is the probability density function (PDF) of the output. In practice, some algebraic relations exist between the input and the weights of SDC systems, leading to a singular state space model between the weights and the control input which increases the complexity of the system. The ignorance of time delay in practical systems will make the effectiveness of the fault diagnosis (FD) and fault tolerant control (FTC) be reduced. In this paper, the linear B-spline basis functions are used to approximate the output PDF. A FD approach based on the adaptive observer is established to diagnose the size of fault in the singular time-delayed SDC system. With the fault diagnosis information, a fault tolerant controller based on PI tracking control scheme is constructed to make the post-fault PDF still track the given distribution. The post-fault closed-loop stability analysis with the practical fault tolerant controller is carried out based on the Lyapunov stability theorem. Finally, a numerical simulation is provided to demonstrate the effectiveness of the proposed approach.  相似文献   

10.
In this work, we present a novel adaptive fault tolerant control (FTC) scheme for a class of control input and system state constrained multi‐input multi‐output (MIMO) nonlinear systems with both multiplicative and additive actuator faults. The input constraints can be asymmetric, and the state constraints can be time‐varying. A novel tan‐type time‐varying Barrier Lyapunov Function (BLF) is proposed to deal with the state constraints, and an auxiliary system is designed to analyze the effect of the input constraints. We show that under the proposed adaptive FTC scheme, exponential convergence of the output tracking error into a small neighbourhood of zero is guaranteed, while the constraints on the system state will not be violated during operation. Estimation errors for actuator faults are bounded in the closed loop. An illustrative example on a two degree‐of‐freedom robotic manipulator is presented to demonstrate the effectiveness of the proposed FTC scheme. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

11.
Lina Yao  Jifeng Qin  Hong Wang  Bin Jiang 《Automatica》2012,48(9):2305-2313
New fault diagnosis (FD) and fault tolerant control (FTC) algorithms for non-Gaussian singular stochastic distribution control (SDC) systems are presented in this paper. Different from general SDC systems, in singular SDC systems, the relationship between the weights and the control input is expressed by a singular state space model, which increases the difficulty in the FD and FTC design. The proposed approach relies on an iterative learning observer (ILO) for fault estimation. The fault may be constant, fast-varying or slow-varying. Based on the estimated fault information, the fault tolerant controller can be designed to make the post-fault probability density function (PDF) still track the given distribution. Simulations are given to show the effectiveness of the proposed FD and FTC algorithms.  相似文献   

12.
In this paper, a fault tolerant control (FTC) strategy using virtual actuators and sensors for linear parameter varying (LPV) systems is proposed. The main idea of this FTC method, initially developed for LTI systems, is to reconfigure the control loop such that the nominal controller could still be used without need of retuning it. The plant with the faulty actuator/sensor is modified adding the virtual actuator/sensor block that masks the actuator/sensor fault. The suggested technique is an active FTC strategy that reconfigures the virtual actuator/sensor on-line taking into account faults and operating point changes. The stability of the reconfigured control loop is guaranteed if the faulty plant is stabilizable/detectable. The LPV virtual actuator/sensor is designed using polytopic LPV techniques and linear matrix inequalities (LMIs). A two-tank system simulator is used to assess the performance of the proposed method. In particular, it is shown that the application of the proposed technique results in an improvement, in terms of performance, with respect to the LTI counterpart.  相似文献   

13.
The purpose of fault diagnosis of stochastic distribution control systems is to use the measured input and the system output probability density function to obtain the fault estimation information. A fault diagnosis and sliding mode fault‐tolerant control algorithms are proposed for non‐Gaussian uncertain stochastic distribution control systems with probability density function approximation error. The unknown input caused by model uncertainty can be considered as an exogenous disturbance, and the augmented observation error dynamic system is constructed using the thought of unknown input observer. Stability analysis is performed for the observation error dynamic system, and the H performance is guaranteed. Based on the information of fault estimation and the desired output probability density function, the sliding mode fault‐tolerant controller is designed to make the post‐fault output probability density function still track the desired distribution. This method avoids the difficulties of design of fault diagnosis observer caused by the uncertain input, and fault diagnosis and fault‐tolerant control are integrated. Two different illustrated examples are given to demonstrate the effectiveness of the proposed algorithm. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

14.
This article presents an integrated fault diagnosis and fault-tolerant control (FTC) methodology for a class of nonlinear multi-input–multi-output systems. Based on the fault information obtained during the diagnostic procedure, an FTC component is designed to compensate for the effect of faults. In the presence of a fault, a baseline controller guarantees the boundedness of all the system signals until the fault is detected. After fault detection and then again after isolation, the controller is reconfigured to improve the tracking performance using online fault diagnostic information. Under certain assumptions, the stability and tracking performances of the closed-loop system are rigorously investigated. It is shown that the system signals always remain bounded and the output tracking error converges to a neighbourhood of the origin of the state space.  相似文献   

15.
In this paper, a new fault diagnosis (FD) and fault tolerant control (FTC) algorithm for a non-Gaussian nonlinear singular stochastic distribution control (SDC) system is studied. The rational square-root fuzzy logic model is used to approximate the output probability density function of non-Gaussian processes and a Takagi-Sugeno (T-S) fuzzy model is employed to transform the non-Gaussian nonlinear SDC system into a fuzzy SDC system. An adaptive fuzzy fault diagnosis observer is constructed to achieve reconstruction of system state and fault. Based on the estimated fault information, the controller is reconfigured by minimising the performance index with regard to the rational entropy subjected to mean constraint. Minimum rational entropy fault tolerant control is introduced to make the output of the past-fault SDC system still have the minimum uncertainty. Simulation results are provided to demonstrate the validity of the FD and minimum rational entropy FTC algorithm.  相似文献   

16.
本文主要研究了四旋翼无人机在外部干扰、执行器存在部分失效和偏置故障并发情况下有限时间轨迹跟踪的控制问题. 通过分析四旋翼无人机动力学特性, 构建了带有外部干扰、执行器机构故障的动力学模型. 基于鲁棒全局快速终端滑模控制算法, 设计了一种有限时间容错控制器, 提高了系统对故障的响应速度. 其次, 针对常值/时变故障和干扰,在控制器设计中采用改进的连续函数进行补偿, 减少了由切换函数引起的系统抖振, 并基于Lyapunov函数对控制器的稳定性进行了分析. 最后, 通过仿真实验验证了所设计控制器的有效性和可靠性, 同时存在执行器故障和外部干扰的情况下, 无人机能够实现较好的轨迹跟踪性能.  相似文献   

17.
This paper addresses the problem of robust fault estimation and fault tolerant control (FTC) for Takagi–Sugeno (T–S) fuzzy systems. A fuzzy-augmented fault estimation observer (AFEO) design is proposed to achieve fault estimation of T–S models with actuator faults. Furthermore, based on the information of online fault estimation, an observer-based dynamic output feedback-fault tolerant controller (DOFFTC) is designed to compensate for the effect of faults by stabilizing the closed-loop system. Sufficient conditions for the existence of both AFEO and DOFFTC are given in terms of linear matrix inequalities. Simulation results of an inverted pendulum system are presented to illustrate the effectiveness of the proposed method.   相似文献   

18.
In this paper, the fault-tolerant control (FTC) problem is investigated for a class of multi-input multiple output nonlinear systems with time-varying delays, and an active FTC method is proposed. The controlled system contains unknown nonlinear functions, unknown control gain functions and actuator faults, which integrates time-varying bias and gain faults. Then, fuzzy logic systems are used to approximate the unknown nonlinear functions and unknown control gain functions, fuzzy adaptive observers are used for fault detection and isolation. Further, based on the obtained information, an accommodation method is proposed for compensating the actuator faults. It is shown that all the variables of the closed-loop system are semi-globally uniformly bounded, the tracking error converges to an arbitrary small neighbourhood of the origin. A simulation is given to demonstrate the effectiveness of the proposed approach.  相似文献   

19.
In this paper, a class of fractional‐order nonlinear systems are considered in the presence of actuator faults. A novel fault tolerant control scheme based on disturbance observer has been presented, where the actuator faults are considered as the system disturbance and can be approximated by the proposed disturbance observer. The developed fault tolerant control guarantees the convergence of the closed‐loop system and the output tracking performance. Finally, a simulation example is presented to verify the effectiveness of the new method.  相似文献   

20.
ABSTRACT

This paper addresses the problem of fault estimation and fault tolerant control for quadrotor unmanned aerial vehicle. Firstly, a robust adaptive fault estimation observer (AFEO) is proposed to achieve fault estimation of quadrotor with actuator fault in the presence of external disturbances and parameter uncertainties. Furthermore, based on the estimation of fault, a dynamic output feedback fault tolerant controller (DOFFTC) is designed to stabilise the closed-loop system with faults and uncertainties. Sufficient conditions for the existence of both AFEO and DOFFTC are given in terms of linear matrix inequalities. Finally, simulation results are presented to illustrate the effectiveness of the proposed strategy.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号