共查询到20条相似文献,搜索用时 312 毫秒
1.
《自动化仪表》2019,(5)
两轮自平衡机器人控制系统具有高阶次、多变量、非线性且强耦合的特性,因此难以建立精准的数学模型。针对两轮自平衡机器人系统的复杂性,对其平衡控制系统进行了研究,提出了一维云模型控制器的设计方法。运用该方法,成功地实现了两轮自平衡机器人的平衡控制,并比较了一维云模型控制器在三规则和五规则下对系统性能的影响。试验结果表明:一维云模型控制器在两轮自平衡机器人平衡控制系统中具有良好的控制性能和强抗干扰性,五规则控制器具有更加优越的控制效果。云模型控制器成功应用在两轮自平衡机器人平衡系统中,并在试验样机平台体现了良好的平衡性能,为今后云模型控制器的设计提供参考,也推进了云模型控制器在硬件平台实现的进程。 相似文献
2.
介绍了基于GALIL运动控制器的踝关节康复机器人的控制系统。该踝关节康复机器人引入生物融合理念,基于4-UP(Pe)S/PS并联机构,采用PC+运动控制器相对独立运行的并行控制模式,实现踝关节复合康复运动。用户利用PC机实现康复机器人康复运动轨迹的规划,康复运动控制程序的自动编制和运动控制器程序的下载,通过操作面板控制运动控制器相对PC独立地执行程序。这种并行控制模式能够在满足康复运动相对复杂的空间康复轨迹需要的前提下,保证踝关节康复机器人系统的反应速度。该系统成功地用于踝关节康复机器人系统,取得了很好的康复效果,为PC+运动控制器模式的康复系统设计提供了范例。 相似文献
3.
4.
通过分析自平衡机器人的工作原理,设计了自平衡机器人控制系统的硬件电路.将TI公司研制的TMS320F28069作为主控制器,利用外围电路控制自平衡机器人保持自身平衡,并完成前进、后退和转向运动.最后,采用PID控制算法对自平衡机器人的姿态角和电机转速进行闭环控制,大大提高了控制精度. 相似文献
5.
6.
为有效抑制串联机构的末端振动,使机器人运动系统的运行更加平滑,设计了以PC104为硬件基础、在RTLinux上进行二次软件开发的机器人控制系统。它通过PCI/ISA总线连接上位机和底层硬件接口电路,以控制伺服电机。分别研究了机器人系统的模型,以及在这一软实时系统上采用反变换法+Pieper方法求解机器人的逆运动学问题。通过比较工业机器人在伺服控制、板卡控制和软件控制三种模式下的运动性能,验证了软件方式的优越性,以及其在运动控制领域中的应用价值。 相似文献
7.
阐述一种自平衡机器人的系统构成、工作原理和控制算法。本系统主要由机械行走装置、控制系统和传感器3部分组成。控制系统以ATmega128单片机为核心,还包括电池及供电模块、电机驱动器及外围电路。机器人平台位姿的监控采用红外测距传感器,经计算获得姿态信息。通过控制实验,验证了该系统的合理性和有效性。 相似文献
8.
两轮自平衡机器人以其机械结构简单,灵活高效的运动特性,具有广阔的应用前景。本文应用理论力学原理,分析并建立了两轮自平衡机器人的动力学模型。在此基础上,分别针对机器人系统的自平衡控制、速度控制设计了比例-积分-微分(PID)控制器。通过复频域和时域分析的方法,提出了一种简便的PID控制参数的整定方法。根据系统PID控制模型,给出了计算机器人马达输出转矩的理论公式。应用实验表明,该控制方法的平衡和速度控制动态和稳态性能良好,且具有占用机器人系统资源少,PID控制参数整定效率高的特点。 相似文献
9.
针对多机器人控制系统难以精确建模、性能指标最优化难等问题,借鉴自然界事物平衡的思想,提出基于平衡原则的决策控制方法,并结合该方法设计一种机器人任务选择策略调整算法.该算法帮助多机器人系统较好地实现任务自组织分配,使系统取得良好的运行效果. 相似文献
10.
在两轮自平衡机器人系统的平衡控制中,为解决因所建立的数学模型不准确和存在未知干扰而影响控制性能的问题,设计了一种自适应模糊控制方法.首先,运用牛顿力学法建立了系统在斜坡上运动的数学模型.针对所建动态模型的非线性,提出采用单点模糊化、乘积推理机和中心平均解模糊化的方法构建了自适应模糊逻辑控制器,然后通过李雅普诺夫稳定性分析的方法,导出控制器的自适应律.在MA TLAB/Simulink中,对自适应模糊控制的两轮自平衡机器人的平衡情况进行了仿真,结果表明,提出的自适应模糊控制器可以实现系统平衡,并具有自适应能力和鲁棒性,为两轮机器人优化控制提供了依据. 相似文献
11.
The purpose of this paper is to propose a hybrid trigonometric compound function neural network (NN) to improve the NN-based tracking control performance of a nonholonomic mobile robot with nonlinear disturbances. In the mobile robot control system, two NN controllers embedded in the closed-loop control system have the simple continuous learning and rapid convergence capability without the dynamics information of the mobile robot to realize the tracking control of the mobile robot. The neuron functions of the hidden layer in the three-layer feedforward network structure consist of the compound cosine function and the compound sine function combining a cosine or a sine function with a unipolar sigmoid function. The main advantages of this NN-based mobile robot control system are better real-time control capability and control accuracy by use of the proposed NN controllers for a nonholonomic mobile robot with nonlinear disturbances. Through simulation experiments applied to the nonholonomic mobile robot with the nonlinear disturbances of dynamics uncertainty and external disturbances, the simulation results show that the proposed NN control system of a nonholonomic mobile robot has better real-time control capability and control accuracy than the compound cosine function NN control system of a nonholonomic mobile robot and then verify the effectiveness of the proposed hybrid trigonometric compound function NN controller for improving the tracking control performance of a nonholonomic mobile robot with nonlinear disturbances. 相似文献
12.
13.
We have designed a mobile robot with a distribution structure for intelligent life space. The mobile robot was constructed
using an aluminum frame. The mobile robot has the shape of a cylinder, and its diameter, height, and weight are 40 cm, 80
cm, and 40 kg, respectively. There are six systems in the mobile robot, including structure, an obstacle avoidance and driving
system, a software development system, a detection module system, a remote supervision system, and others. In the obstacle
avoidance and driving system, we use an NI motion control card to drive two DC servomotors in the mobile robot, and detect
obstacles using a laser range finder and a laser positioning system. Finally, we control the mobile robot using an NI motion
control card and a MAXON driver according to the programmed trajectory. The mobile robot can avoid obstacles using the laser
range finder, and follow the programmed trajectory. We developed the user interface with four functions for the mobile robot.
In the security system, we designed module-based security devices to detect dangerous events and transmit the detection results
to the mobile robot using a wireless RF interface. The mobile robot can move to the event position using the laser positioning
system. 相似文献
14.
15.
16.
17.
《Robotics and Computer》1997,13(4):297-307
The use of a self-propelled mobile robot working in close proximity to a support vehicle for purposes of power, materials, etc. would be extremely valuable for highway maintenance and construction operations. This paper discusses the development of such a uniqe mobile robot system and emphasizes the robot's control system. The wheeled mobile robot is differentially steered and tethered to a support vehicle via a mechanical linkage which has position tracking capability. This mobile robot system has been termed the tethered mobile robot (TMR), and such an approach has the potential for use in a wide variety of highway maintenance operations. An optimal control system applicable to many highway maintenance operations is designed and implemented through the utilization of recently developed servo control technology. Experimental results presented show significant promise for the TMR system. 相似文献
18.
19.
轮式机器人是一个典型的非完整性系统。由于非线性和非完整特性,很难为移动机器人系统的轨迹跟踪建立一个合适的模型。介绍了一种轮式机器人滑模轨迹跟踪控制方法。滑模控制是一个鲁棒的控制方法,能渐近的按一条所期望的轨迹稳定移动机器人。以之为基础,描述了轮式机器人的动力学模型并在二维坐标下建立了运动学方程,根据运动学方程设计滑模控制器,该控制器使得机器人的位置误差收敛到零。 相似文献