Overview of energy storage systems for storing electricity from renewable energy sources in Saudi Arabia

Renewable power (photovoltaic, solar thermal or wind) is inherently intermittent and fluctuating. If renewable power has to become a major source of base-load dispatchable power, electricity storage systems of multi-MW capacity and multi-hours duration are indispensable. An overview of the advanced energy storage systems to store electrical energy generated by renewable energy sources is presented along with climatic conditions and supply demand situation of power in Saudi Arabia. Based on the review, battery features needed for the storage of electricity generated from renewable energy sources are: low cost, high efficiency, long cycle life, mature technology, withstand high ambient temperatures, large power and energy capacities and environmentally benign. Although there are various commercially available electrical energy storage systems (EESS), no single storage system meets all the requirements for an ideal EESS. Each EESS has a suitable application range.     

A review on the pattern of electricity generation and emission in Iran from 1967 to 2008

The electricity consumption growth in Iran requires a rapid development of power plant construction. Like many other countries, most of the power plants in Iran are using fossil fuel. In the past decade, thermal power plants generated about 94% of electricity and about 6% was generated by renewable sources such as hydro-power. This study is to show a clear view of 42 years an evolutionary trend of Iran's electricity generation industry. The capacity of power generation installed and electricity generation from the years 1967 to 2008 has been gathered. The total pollutant emissions and emission per unit electricity generation for each type of power plants have also been calculated using emission factors and the pattern of electricity generation and emission has been presented. The results shown that encouraging of using renewable energy sources and increasing the contribution of the combined cycle as a best type of thermal power plants and use more natural gas is recommended to reduce emission.     

Economic implications of thermal energy storage for concentrated solar thermal power

Solar energy is an attractive renewable energy source because the sun's energy is plentiful and carbon-free. However, solar energy is intermittent and not suitable for base load electricity generation without an energy backup system. Concentrated solar power (CSP) is unique among other renewable energy options because it can approach base load generation with molten salt thermal energy storage (TES). This paper describes the development of an engineering economic model that directly compares the performance, cost, and profit of a 110-MW parabolic trough CSP plant operating with a TES system, natural gas-fired backup system, and no backup system. Model results are presented for 0–12 h backup capacities with and without current U.S. subsidies. TES increased the annual capacity factor from around 30% with no backup to up to 55% with 12 h of storage when the solar field area was selected to provide the lowest levelized cost of energy (LCOE). Using TES instead of a natural gas-fired heat transfer fluid heater (NG) increased total plant capital costs but decreased annual operation and maintenance costs. These three effects led to an increase in the LCOE for PT plants with TES and NG backup compared with no backup. LCOE increased with increasing backup capacity for plants with TES and NG backup. For small backup capacities (1–4 h), plants with TES had slightly lower LCOE values than plants with NG backup. For larger backup capacities (5–12 h), plants with TES had slightly higher LCOE values than plants with NG backup. At these costs, current U.S. federal tax incentives were not sufficient to make PT profitable in a market with variable electricity pricing. Current U.S. incentives combined with a fixed electricity price of $200/MWh made PT plants with larger backup capacities more profitable than PT plants with no backup or with smaller backup capacities. In the absence of incentives, a carbon price of $100–$160/tonne CO_2eq would be required for these PT plants to compete with new coal-fired power plants in the U.S. If the long-term goal is to increase renewable base load electricity generation, additional incentives are needed to encourage new CSP plants to use thermal energy storage in the U.S.     

考虑多弹性资源调峰成本的可再生能源开发协同优化模型

中国制定了2030年和2060年的碳排放目标.可再生能源,主要是风能和光伏发电,被认为是未来的发电方式.新能源发展的主要制约因素是电力系统资源监管灵活性有限,导致消费能力不足.因此需要考虑调峰灵活的资源成本以及区域可再生能源的合理协调开发和运行优化.本研究考虑了电力系统综合成本,综合分析电力系统各种弹性调节资源潜力及其...     

Recent Developments in Integrated Solar Combined Cycle Power Plants

Global concern for depleting fossil fuel reserves have been compelling for evolving power generation options using renewable energy sources. The solar energy happens to be a potential source for running the power plants among renewable energy sources. Integrated Solar Combined Cycle(ISCC) power plants have gained popularity among the thermal power plants. Traditional ISCC power plants use Direct Steam Generation(DSG) approach. However, with the DSG method, the ISCC plant’s overall thermal efficiency does not increase significantly due to variations in the availability of solar energy. Thermal Energy Storage(TES) systems when integrated into the solar cycle can address such issues related to energy efficiency, process flexibility, reducing intermittency during non-solar hours. This review work focuses and discusses the developments in various components of the ISCC system including its major cycles and related parameters. The main focus is on CSP technologies, Heat Transfer Fluid(HTF), and Phase Change Material(PCM) used for thermal energy storage. Further, study includes heat enhancement methods with HTF and latent heat storage system. This study will be beneficial to the power plant professionals intending to modify the solar-based Combined Cycle Power Plant(CCPP) and to retrofit the existing Natural Gas Combined Cycle(NGCC) plant with the advanced solar cycle.     

Stable power supply of an independent power source for a remote island using a Hybrid Energy Storage System composed of electric and hydrogen energy storage systems

We propose a self-sustaining power supply system consisting of a “Hybrid Energy Storage System (HESS)” and renewable energy sources to ensure a stable supply of high-quality power in remote islands. The configuration of the self-sustaining power supply system that can utilize renewable energy sources effectively on remote islands where the installation area is limited is investigated. It is found that it is important to select renewable energy sources whose output power curve is close to the load curve to improve the efficiency of the system. The operation methods that can increase the cost-effectiveness of the self-sustaining power supply system are also investigated. It is clarified that it is important for increasing the cost effectiveness of the self-sustaining power supply system to operate the HESS with a smaller capacity of its components by setting upper limits on the output power of the renewable energy sources and cutting the infrequent generated power.     

Design and evaluation of PV-wind hybrid system with hydroelectric pumped storage on the National Power System of Egypt

National and international policies encourage increased penetration of solar and wind energy into electrical networks in order to reduce greenhouse gas emission. Solar radiation and wind speed variations complicate the integration of wind and solar generation into power systems and delay the transition of these sources from centralized to distributed energy sources. The increased penetration of nontraditional energy sources into the electric grid stimulates the demand for large capacities in the field of energy storage. A mathematical model, which describes the operation of a proposed hybrid system, including solar PV, wind energy, and a pumped storage hydroelectric power plant is developed in this paper. This hydropower plant utilizes seawater as a lower reservoir, and only a tank has to be built in order to reduce the installation cost of the storing system. The pumped storage power plant used for compensation of the variation of the output energy from the PV and wind power plants by discharging water from the upper reservoir, which is previously pumped in the case of surplus energy from PV and wind turbine power plants. The impact of the proposed system on the grid utility is investigated in accordance with the values of energy exchange (deficits and surpluses of energy) between the considered hybrid system and the grid. The optimum design is determined by the pump and turbine capacities, upper reservoir volume, and the volume of water left in the tank for emergencies. Different scenarios of the optimum operations are presented for analysis. The results obtained from the examined scenarios indicate the ability of such a hybrid energy system to reduce the exchange of energy with the grid. This paper indicates the technical feasibility of seawater pumped-storage hydropower plant for increasing the Egyptian national grid’s ability to accept high integration of renewable energy sources.     

Flexibility in Europe's power sector — An additional requirement or an automatic complement?

By 2050, the European Union aims to reduce greenhouse gases by more than 80%. The EU member states have therefore declared to strongly increase the share of renewable energy sources (RES-E) in the next decades. Given a large deployment of wind and solar capacities, there are two major impacts on electricity systems: First, the electricity system must be flexible enough to cope with the volatile RES-E generation, i.e., ramp up supply or ramp down demand on short notice. Second, sufficient back-up capacities are needed during times with low feed-in from wind and solar capacities. This paper analyzes whether there is a need for additional incentive mechanisms for flexibility in electricity markets with a high share of renewables. For this purpose, we simulate the development of the European electricity markets up to the year 2050 using a linear investment and dispatch optimization model. Flexibility requirements are implemented in the model via ramping constraints and provision of balancing power. We found that an increase in fluctuating renewables has a tremendous impact on the volatility of the residual load and consequently on the flexibility requirements. However, any market design that incentivizes investments in least (total system) cost generation investment does not need additional incentives for flexibility. The main trigger for investing in flexible resources is the achievable full load hours and the need for backup capacity. In a competitive market, the cost-efficient technologies that are most likely to be installed, i.e., gas-fired power plants or flexible CCS plants, provide flexibility as a by-product. Under the condition of system adequacy, flexibility never poses a challenge in a cost-minimal capacity mix. Therefore, any market design incentivizing investments in efficient generation thus provides flexibility as an inevi complement.     

Optimal utilization of renewable energy-based IPPs for industrial load management

Share of power generation from renewable energy sources has been steadily increasing all over the world, mainly due to the concern about clean environment. Cost of renewable power generation has reduced considerably during the last two decades due to technological advancements and at present some of the renewable energy sources can generate power at costs comparable with that of fossil fuels. In this paper, application of renewable energy-based power generation is proposed, for load management. The formulation utilizes non-linear programming technique for minimizing the electricity cost and reducing the peak demand, by supplementing power by renewable energy sources, satisfying the system constraints. Case study of twenty-two large-scale industries showed that, significant reduction in peak demand (about 34%) and electricity cost (about 14%) can be achieved, by the optimal utilization of the renewable energy from independent power producers (IPPs).     

Turkey's Renewable Energy Facilities in the Near Future

In this work, renewable energy facilities of Turkey were investigated. Electricity is mainly produced by thermal power plants, consuming coal, lignite, natural gas, fuel oil and geothermal energy, and hydro power plants in Turkey. Turkey has no large oil and gas reserves. The main indigenous energy resources are lignite, hydro and biomass. Turkey has to adopt new, long-term energy strategies to reduce the share of fossil fuels in primary energy consumption. For these reasons, the development and use of renewable energy sources and technologies are increasingly becoming vital for sustainable economic development of Turkey. The most significant developments in renewable production are observed hydropower and geothermal energy production. Renewable electricity facilities mainly include electricity from biomass, hydropower, geothermal, and wind and solar energy sources. Biomass cogeneration is a promising method for production bioelectricity.     

德国《可再生能源法》2014年最新改革解析及启示

德国政府计划于2014年对可再生能源支持政策进行全面改革,此次改革仍保留了《可再生能源法2012》的整体架构,重点是要控制非水电可再生能源的补贴成本。采取的主要措施包括控制风电、光伏和生物质发电年度装机容量增长目标,补贴重点侧重更加经济有效的可再生能源类型(即陆上风电和光伏),上网电价递减率与年度新增装机容量挂钩的灵活限额机制,调整上网电价递减周期等。同时通过直接营销和拍卖等市场机制,让可再生能源更加融入市场。这标志着德国可再生能源的发展进入到引导投资和重点扶持的新阶段。建议借鉴德国《可再生能源法》完善我国可再生能源支持政策,包括针对不同可再生能源的技术特点制定完善的、自适应的上网电价模型,顺应技术发展规律实行"老机老电价、新机新电价"的电价调整机制,不断提高补贴手段的市场化和有效性等。     

Stochastic security-constrained operation of wind and hydrogen energy storage systems integrated with price-based demand response

Because of highly increasing energy consumption, environmental issues and lack of common energy sources, the use of renewable energy sources especially wind power generation technology is increasing with significant growth in the world. But due to the variable nature of these sources, new challenges have been created in the balance between production and consumption of power system. The hydrogen energy storage (HES) system by storing excess wind power through the technology of power to hydrogen (P2H) and delivering it to the electricity network through hydrogen-based gas turbine at the required hours reduces not only wind alternation but can play an important role in balancing power production and consumption. On the other hand, power consumers by participating in demand response (DR) programs can reduce their consumption at peak load or wind power shortage hours, and increase their consumption at low-load or excess wind power hours to reduce wind power spillage and system energy cost. This paper proposes a stochastic security constrained unit commitment (SCUC) with wind energy considering coordinated operation of price-based DR and HES system. Price-based DR has been formulated as a price responsive shiftable demand bidding mechanism. The proposed model has been tested on modified 6-bus and 24-bus systems. The numerical results show the effect of simultaneous consideration of HES system and price-based DR integrated with wind energy on hourly generation scheduling of thermal units. As a result there is some reduction in wind generation power spillage and daily operation cost.     

Storage technologies for wind power in the Columbia River Gorge

The transition from traditional energy sources to renewable has gained popularity and acceptance in recent years. This has been driven mainly by the current level of pollution, global warming, decommission of old nuclear power plants and the increasing cost of conventional energy sources. Nevertheless, one of the many steps to overcome is the seasonality or intermittency of renewable energy sources such as wind power. In recent years, new technologies have come up to address this problem, so the energy can be stored for future purposes. This paper analyses these energy storage alternatives for a specific case in the Columbia River Gorge for wind power. A hierarchical decision model is developed with criteria including political, social, environmental, technical and economical. The main conclusions highlight that the economical and technical criteria are among the most important ones for decision-makers.     

Flexible power generation scenarios for biogas plants operated in Germany: impacts on economic viability and GHG emissions

Biogas plants enable power to be generated in a flexible way so that variable, renewable energy sources can be integrated into the energy system. In Germany, the Renewable Energy Sources Act promotes flexible power generation in biogas plants. Two existing biogas plants in flexible operation were analyzed with respect to economic viability and greenhouse gas (GHG) emissions to assess the feasibility of flexible operation. To do this, a biogas technology simulation model was developed to reproduce the technical design of both biogas plants and to link this design with twelve flexibilization scenarios. The evaluation of the economic viability is based on a discounting method of investment appraisal. For assessing the level of GHG emissions, the life cycle assessment method has been applied. The results show that the profitability of flexibilization is contingent upon premium payments promoting flexibility and direct sales resulting from a higher electrical efficiency of new or additionally installed combined heat and power units. Overall, with respect to profitability, the results of the flexible power generation scenarios are dependent upon the properties of the technical plant, such as its power generation and gas storage capacities. Relative GHG emissions from flexible biogas plants show significantly lower values than for referenced fossil gas–steam power stations. Among the various scenarios, the results reveal that the level of GHG emissions especially depends on the number of operating hours of the additional combined heat and power unit(s). The results of the analyzed biogas plants showed no direct correlation between GHG emissions and the economic benefits. Overall, a flexible power generation of biogas plants may improve the economic viability as well as result in lower GHG emissions in comparison with a conventional base load operation. © 2016 The Authors. International Journal of Energy Research published by John Wiley & Sons Ltd.     

Techno-economic evaluation of medium scale power to hydrogen to combined heat and power generation systems

The European Hydrogen Strategy and the new « Fit for 55 » package indicate the urgent need for the alignment of policy with the European Green Deal and European Union (EU) climate law for the decarbonization of the energy system and the use of hydrogen towards 2030 and 2050. The increasing carbon prices in EU Emission Trading System (ETS) as well as the lack of dispatchable thermal power generation as part of the Coal exit are expected to enhance the role of Combined Heat and Power (CHP) in the future energy system. In the present work, the use of renewable hydrogen for the decarbonization of CHP plants is investigated for various fossil fuel substitution ratios and the impact of the overall efficiency, the reduction of direct emissions and the carbon footprint of heat and power generation are reported. The analysis provides insights on efficient and decarbonized cogeneration linking the power with the heat sector via renewable hydrogen production and use. The levelized cost of hydrogen production as well as the levelized cost of electricity in the power to hydrogen to combined heat and power system are analyzed for various natural gas substitution scenarios as well as current and future projections of EU ETS carbon prices.     

Intelligent optimization of renewable resource mixes incorporating the effect of fuel risk,fuel cost and CO2 emission

Power system planning is a capital intensive investment-decision problem. The majority of the conventional planning conducted since the last half a century has been based on the least cost approach, keeping in view the optimization of cost and reliability of power supply. Recently, renewable energy sources have found a niche in power system planning owing to concerns arising from fast depletion of fossil fuels, fuel price volatility as well as global climatic changes. Thus, power system planning is under-going a paradigm shift to incorporate such recent technologies. This paper assesses the impact of renewable sources using the portfolio theory to incorporate the effects of fuel price volatility as well as CO₂ emissions. An optimization framework using a robust multi-objective evolutionary algorithm, namely NSGA-II, is developed to obtain Pareto optimal solutions. The performance of the proposed approach is assessed and illustrated using the Indian power system considering real-time design practices. The case study for Indian power system validates the efficacy of the proposed methodology as developing countries are also increasing the investment in green energy to increase awareness about clean energy technologies.     

Generation-expansion planning with linearized primary frequency response constraints

As renewable energy resources increasingly penetrate the electric grid, the inertia capability of power systems has become a developmental bottleneck. Nevertheless, the importance of primary frequency response (PFR) when making generation-expansion plans has been largely ignored. In this paper, we propose an optimal generation-expansion planning framework for wind and thermal power plants that takes PFR into account. The model is based on the frequency equivalent model. It includes investment, startup/shutdown, and typical operating costs for both thermal and renewable generators. The linearization constraints of PFR are derived theoretically. Case studies based on the modified IEEE 39-bus system demonstrate the efficiency and effectiveness of the proposed method. Compared with methods that ignore PFR, the method proposed in this paper can effectively reduce the cost of the entire planning and operation cycle, improving the accommodation rate of renewable energy.     

A review on distributed generation impacts on electric power system

In 2021, the world's total installed capacity of generation units based on renewable energy sources (not including hydropower) amounted to about 1674 GW: over 825 GW and 849 GW of wind and solar power plants were installed respectively. The growing of the installed capacity of these distributed generators is a response to the increasing the power consumption, global environmental issues and has also become possible due to the development of technology in field of power semiconductor devices. However, on the way of large-scale implementation of distributed generators based on renewable energy sources, traditional electric power system meets new challenges to ensure the reliability and sustainability of new electric power systems with renewable energy sources. In particular, distributed generators change processes in the electric power system, impact to the parameters and power balance, change the magnitude and direction of power flow and short-circuit current, which determines the need to update the settings of the relay protection and automation systems of traditional electric power system and to coordinate their operation with automatic control systems of installed distributed generators. The above-mentioned tasks form a number of scientific research directions, one of which is a task of determining optimal size and location of distributed generators. The main purpose of this optimization task is to reduce power losses, operating and total electricity cost, improve the voltage profile, etc. In addition, the correct and reasonable placement of distributed generators defines an effective planning of the operating modes of electric power system and power plants (especially based on renewable energy sources, the operating modes of which depend on weather conditions and can be sharply variable).The paper highlighted the impacts of distributed generators on power losses, the voltage level, maintaining the power balance and the possibility of participating in the frequency regulation, and short-circuit current in power system. The optimization criteria, the main limiting conditions, as well as methods for solving this optimization problem are considered. This review will help the System operators and investing companies, especially in Russia, to form the main aim, objective function and constraints that will aid to meet their load demand at minimum cost and to choose from the options available for optimization of location and capacity of distributed generators.     

Thermodynamics and exergoeconomic analysis of geothermal power plants

Fossil fuel reserves (coal, oil, natural gas, etc.) diminish day by day. In addition, rapid advancement of technology causes an increase in the amount of energy needed. This emerging situation resulted in ever increasing importance of renewable energy sources, and various systems are being developed to utilize these renewable energy sources effectively.In this study, information about Ayd?n–Salavatli geothermal field’s features and working principles of the 2 power plants (DORA 1 and DORA 2) in the region are given. Power plants’ energy and exergy efficiencies were calculated with the emphasis on the effects of thermal fluids used in power plants. Also, in this study, some correlations were developed.Power plants’ sections which cause exergy losses were identified. Accordingly, improvement suggestions were presented in this study. Additionally, exergoeconomic analyses were conducted while power plants’ investment costs and equipment maintenance costs were taken into consideration.     

Reducing cycling costs in coal fired power plants through power to hydrogen

The increase of renewable share in the energy generation mix makes necessary to increase the flexibility of the electricity market. Thus, fossil fuel thermal power plants have to adapt their electricity production to compensate these fluctuations. Operation at partial load means a significant loss of efficiency and important reduction of incomes from electricity sales in the fossil power plant. Among the energy storage technologies proposed to overcome these problems, Power to Gas (PtG) allows for the massive storage of surplus electricity in form of hydrogen or synthetic natural gas. In this work, the integration of a Power to Gas system (50 MWe) with fossil fuel thermal power plants (500 MWe) is proposed to reduce the minimum complaint load and avoid shutdowns. This concept allows a continuous operation of power plants during periods with low demand, avoiding the penalty cost of shutdown. The operation of the hybrid system has been modelled to calculate efficiencies, hydrogen and electricity production as a function of the load of the fossil fuel power plant. Results show that the utilisation of PtG diminishes the specific cost of producing electricity between a 20% and 50%, depending on the framework considered (hot, warm and cold start-up). The main contribution is the reduction of the shutdown penalties rather than the incomes from the sale of the hydrogen. At the light of the obtained results, the hybrid system may be implemented to increase the cost-effectiveness of existing fossil fuel power plants while adapting the energy mix to high shares of variable renewable electricity sources.