Oxidative stability of polyunsaturated fatty acids and soybean oil in an aqueous solution with emulsifiers

The oxidative stability of polyunsaturated fatty acids (PUFA) and soybean oil homogenized with emulsifiers was investigated. Model emulsions were prepared from PUFA, including linoleic acid (LA), arachidonic acid (AA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), and from soybean oil emulsified with different emulsifiers: three Tween emulsifiers (Tween 20, Tween 60, Tween 80) and two sucrose esters (S-1170 and S-1570) were used. The results showed that the emulsions prepared from LA and the various emulsifiers, oxidized at 40°C, were unstable. However, the corresponding AA, EPA, and DHA emulsions were stable, indicating that PUFA with a higher degree of unsaturation were more stable with emulsifiers than without the emulsifiers. In the soybean oil-in-water model system, the oxidation of soybean oil with various emulsifiers was less than without the emulsifiers.     

Oxidative stability of soybean oils with altered fatty acid compositions

The oxidative stabilities of one canola oil and six soybean oils of various fatty acid compositions were compared in terms of peroxide values, conjugated dienoic acid values and sensory evaluations. Two of the soybean oils (Hardin and BSR 101) were from common commercial varieties. The other four soybean oils were from experimental lines developed in a mutation breeding program at Iowa State University that included A17 with 1.5% linolenate and 15.2% palmitate; A16 with 2% linolenate and 10.8% palmitate; A87-191039 with 2% linolenate and 29.6% oleate; and A6 with 27.5% stearate. Seed from the soybean genotypes was cold pressed. Crude canola oil was obtained without additives. All oils were refined, bleached and deodorized under laboratory conditions with no additives and stored at 60°C for 15 days. The A17, A16, A87-191039 and A6 oils were generally more stable to oxidation than the commercial soybean varieties and canola oil as evaluated by chemical and sensory tests. Canola oil was much less stable than Hardin and BSR 101 oils by both chemical and sensory tests. The peroxide values and flavor scores of oils were highly correlated with the initial amounts of linolenate (r=0.95, P=0.001). Flavor quality and flavor intensity had negative correlations with linolenate, (r=−0.89, P=0.007) and (r=−0.86, P=0.013), respectively.     

Frying stability of high-oleate and regular soybean oil blends

The objective of this work was to study the frying stability of soybean oil (SBO) with reduced linoleate (18∶2) and linolenate (18∶3) and elevated oleate (18∶1) contents. High-oleate SBO [HO SBO, 79% oleic acid (OA)] and a control (conventional SBO, 21.5% OA) were tested as is, as well as blended in different ratios to make three blended oils containing 36.9, 50.7, and 64.7% OA, abbreviated as 37%OA, 51%OA, and 65%OA, respectively. In addition, a low-linolenate (LL) SBO containing 1.4% 18∶3 and 25.3% 18∶1 was tested. Bread cubes (8.19 cm³) were fried in each of 18 oils (6 treatments×3 replicates). We hypothesized that stability indicators would be indirectly related to the total 18∶2 plus 18∶3 percentages and/or the calculated oxidizability. In general, the results were fairly predictable based on total 18∶2 and 18∶3 concentrations. The overall frying stability of the six oil treatments, from the best to the poorest, was: 79%OA, 65%OA, 51%OA, LL≥37%OA, and the control, with respective total compositions for 18∶2 plus 18∶3 of 10.3, 23.6, 36.3, 59.6, 48.9, and 62.8%. The greatly reduced concentration of 18∶3 in the LL SBO made it more stable than the 37%OA, even though the combined composition of 18∶2 and 18∶3 of LL was greater than that of the 37%OA. Blending conventional SBO with HO SBO had a profound effect on the oxidative stability index and color of the blended oils, but the values were not linearly predictable by the percentage of control in the blended oil. Other stability indices, including calculated oxidizability, calculated iodine value, conjugated dienoic acid value, and viscosity, changed in linear response to an increased proportion of the control in the blends.     

Composition and oxidative stability of soybean oil in mixtures with jojoba oil

Improvement of the oxidative stability of soybean oil (SBO) by blending with jojoba oil (JO) was investigated. SBO in the presence of 5, 10, 15 and 20 wt‐% of JO was subjected to accelerated storage at 60 °C. Peroxide values (PV), anisidine values (AV), UV absorption characteristics (K₂₃₂ and K₂₇₀ values), and headspace volatiles were determined to monitor the oxidative stability of oil samples. JO was effective in reducing the formation of hydroperoxides and volatile compounds in SBO. The effect was remarkable in SBO/JO blends containing 15 and 20% JO, which showed significant reductions in PV, AV and volatile content with respect to pure SBO. The increased oxidative stability of SBO/JO blends could not be attributed to JO tocopherols, since the addition of JO to SBO significantly reduced the tocopherol content of SBO. Besides the tocopherol content and unsaturation degree of SBO and JO, the effect of the JO ester structure on the oxidative stability of the blends is discussed. The enhanced chemical and flavor stabilities of SBO/JO blends with respect to pure SBO may make a significant contribution to improve the shelf life of SBO by reducing the deterioration reactions related to lipid peroxidation.     

Oxidative stability of soybean oil fatty acid methyl esters by oil stability index (OSI)

Biodiesel, an alternative diesel fuel derived from transesterification of vegetable oils or animal fats, is composed of saturated and unsaturated long-chain FA alkyl esters. During long-term storage, oxidation caused by contact with air (autoxidation) presents a legitimate concern with respect to monitoring and maintaining fuel quality. Extensive oxidative degradation may compromise quality by adversely affecting kinematic viscosity, acid value, or PV. This work examines the oil stability index (OSI) as a parameter for monitoring the oxidative stability of soybean oil FAME (SME). SME samples from five separate sources and with varying storage and handling histories were analyzed for OSI at 60°C using an oxidative stability instrument. Results showed that OSI may be used to measure relative oxidative stability of SME samples as well as to differentiate between samples from different producers. Although addition of α-tocopherol or TBHQ increased OSI, responses to these antioxidants varied with respect to SME sample. Variations in response to added antioxidant were attributed to aging and other effects that may have caused oxidative degradation in samples prior to acquisition for this study. Results showed that OSI was more sensitive than iodine value in detecting the effects of oxidative degradation in its early stages when monitoring SME during storage.     

Determination of oxidation stability of soybean oil with the oxidative stability instrument: Operation parameter effects

Operation parameters of the oil stability index instrument were evaluated to determine their effect on the oxidative stability of commercial soybean oil. A factorial design was developed to evaluate the following three parameters, each at two levels, sample weight (2.5 or 5.0 g), conductivity tube temperature (20 or 30°C), and air flow rate (12 or 20 L/h), for a total of eight observations. Significance testing indicated that sample size and air flow rate affected oil oxidative stability independently (P<0.001), but not in combination. The conductivity tube temperature did not affect the oxidation stability index. Presented at the 1993 American Oil Chemists’ Society Meeting in Anaheim, California.     

Frying stability of soybean and canola oils with modified fatty acid compositions

Pilot plant-processed samples of soybean and canola (lowerucic acid rapeseed) oil with fatty acid compositions modified by mutation breeding and/or hydrogenation were evaluated for frying stability. Linolenic acid contents were 6.2% for standard soybean oil, 3.7% for low-linolenic soybean oil and 0.4% for the hydrogenated low-linolenic soybean oil. The linolenic acid contents were 10.1% for standard canola oil, 1.7% for canola modified by breeding and 0.8% and 0.6% for oils modified by breeding and hydrogenation. All modified oils had significantly (P<0.05) less room odor intensity after initial heating tests at 190°C than the standard oils, as judged by a sensory panel. Panelists also judged standard oils to have significantly higher intensities for fishy, burnt, rubbery, smoky and acrid odors than the modified oils. Free fatty acids, polar compounds and foam heights during frying were significantly (P<0.05) less in the low-linolenic soy and canola oils than the corresponding unmodified oils after 5 h of frying. The flavor quality of french-fried potatoes was significantly (P<0.05) better for potatoes fried in modified oils than those fried in standard oils. The potatoes fried in standard canola oil were described by the sensory panel as fishy.     

High-temperature stability of soybean oils with altered fatty acid compositions

One canola oil and six soybean oils with different fatty acid compositions were heated intermittently, and bread cubes were fried in them to determine the stability of the oils. Two of the soybean oils were commercial varieties Hardin and BSR 101. The other soybean oils were from experimental lines developed at Iowa State University, and included A17 with 1.5% linolenate (18:3) and 15.1% palmitate (16:0), A16 with 1.9% 18:3 and 10.6% 16:0, A87-191039 with 1.8% 18:3 and 29.1% oleate (18:1) and A6 with 27.7% stearate (18:0). The soybean seeds were cold-pressed and crude canola oil was obtained without additives. Oils were refined, bleached and deodorized under laboratory conditions with additions. Each oil (300 mL) was heated to 180 ± 5°C in a minifryer. Bread cubes were fried at the beginning of heating, and half of the cubes were used for analyses. The second half was analyzed after storage at 60°C for seven days. Heating of the oils was continued for 20 h, cooled for 10 h, and then reheated for another 20 h, after which additional bread cubes were fried and analyzed. Results of sensory evaluation of the fried cubes, the peroxide values (PV) of oils extracted from the cubes and the conjugated dienoic acid values of the oils showed that the A17, A16, A87-191039 and A6 oils had better stabilities than did Hardin, BSR 101 and canola oils. The initial 18:3 contents of oils predicted their oxidative and flavor stabilities under heating and frying conditions (for PVvs. 18:3, r=0.89,P=0.008; for flavor qualityvs. 18:3, r=−0.93,P=0.002; for flavor intensityvs. 18:3, r=−0.91,P=0.004).     

Modification of epoxidized soybean oil for lubricant formulations with improved oxidative stability and low pour point

To produce soybean oil-based lubricants with good oxidative stability and low pour point, epoxidized soybean oil (SBO) was chemically modified. Epoxidized SBO was reacted with various alcohols in the presence of sulfuric acid as a catalyst to give a ring-opened intermediate product. In this step, the epoxy group was transformed to the functional group of-CH(OR¹)CH(OH)-(where the R¹=methyl, 1-butyl, 2-butyl, 1-hexyl, cyclohexyl, 2,2-dimethyl-1-propyl, or 1-decyl). The ¹H nuclear magnetic resonance spectra of the products indicated that transesterification was accompanied by the ringopening reaction except when the bulky 2,2-dimethyl-1-propanol was used. Acid anhydride was used to esterify the hydroxy groups in the ring-opened product. This resulted in a fluid that is a lubricant candidate with the functional group of −CH(OR¹)CH(OCOR²)−. Pour point studies of the resulting products showed that the pour points varied with the substituents, R¹ and R². Products with R¹=CH₃(CH₂)₅₋ and R²=CH₃(CH₂)₂₋, (CH₃)₂CH−, or CH₃(CH₂)₄-showed the lowest pour points (−39, −39, and −45°C, respectively) when 1% of pour point depressant was added. For the oxidative stability test, two products, in which R¹, R²=CH₃(CH₂)₅₋, (CH₃)₂CH− and R¹, R²=CH₃(CH₂)₅₋, CH₃(CH₂)₄₋, were chosen for a modified Penn State micro-oxidation test. In the oxidative stability test, the products gave 69–71% of oxidative evaporation and 10–17% of tetrahydrofuran-insoluble deposits in 3 h at 175°C. The amounts of deposits were much lower than those of soybean oil (96%) and epoxidized SBO (83%) and even less than those of most petroleum-based lubricant basestocks (3–93%).     

Effect of triacylglycerol composition and structures on oxidative stability of oils from selected soybean germplasm

The oxidative stability of soybean oil triacylglycerols was studied with respect to composition and structure. Crude soybean oils of various fatty acid and triacylglycerol composition, hexane-extracted from ground beans, were chromatographed to remove non-triacylglycerol components. Purified triacylglycerols were oxidized at 60°C, in air, in the dark. The oxidative stability or resistance of the substrate to reaction with oxygen was measured by determination of peroxide value and headspace analysis of volatiles of the oxidized triacylglycerols (at less than 1% oxidation). The correlation coefficients (r) for rates of peroxide formation (r=0.85) and total headspace volatiles (r=0.87) were related positively to oxidizability. Rate of peroxide formation showed a positive correlation with average number of double bonds (r=0.81), linoleic acid (r=0.63), linolenic acid (r=0.85). Rate of peroxide formation also showed a positive correlation with linoleic acid (r=0.72) at the 2-position of the glycerol moiety. A negative correlation was observed between rate of peroxide formation and oleic acid (r=−0.82). Resistance of soybean triacylglycerols to reaction with oxygen was decreased by linolenic (r=0.87) and increased by oleic acid (r=−0.76)-containing triacylglycerols. Volatile formation was increased by increased concentration of linolenic acid at exterior glycerol carbons 1,3 and by linoleic acid at the interior carbon 2. Headspace analysis of voltiles and high-performance liquid chromatography of hydroperoxides indicated that as oxidation proceeded there was a slight decrease in the linolenic acid-derived hydroperoxides and an increase in the linoleic acid-derived hydroperoxides. The oxidative stability of soybean oil triacylclycerols with respect to composition and structure is of interest to the development of soybean varieties with oils of improved odor and flavor stability. Presented at the 81st Annual American Oil Chemists' Society Meeting, Baltimore, MD, April 18–21, 1990.     

Oxidative stability and acceptability of camelina oil blended with selected fish oils

The effects of blending camelina oil with a number of fish oils on oxidative stability and fishy odour were evaluated. Camelina oil was found to be more stable than tuna oil, ‘omega‐3’ fish oil and salmon oil as indicated by predominantly lower ρ‐anisidine (AV), thiobarbituric acid reactive substances (TBARS) and conjugated triene levels (CT) during storage at 60 °C for 20 days (p < 0.05). Peroxide values (PV) were similar for all oils until Day 13 when values for camelina oil were higher. Values for blends of the fish oils (50, 25, 15, 5%) with camelina oil were generally between those of their respective bulk oils indicating a dilution effect. Camelina oil had a similar odour score (p < 0.05) to sunflower oil (9.2 and 9.6, respectively) indicating, as expected, an absence of fishy odours. In comparison, the fish oils had lower scores of 6.1 to 6.6 (p < 0.05) indicating mild to moderate fishy odours. Odour scores were improved at the 25% fish oil levels (p < 0.05) and were not different to camelina oil at the 15 or 5% levels (p < 0.05). Practical applications: Camelina oil is a potentially important functional food ingredient providing beneficial n‐3 PUFA. Oil extracted from Camelina sativa seeds contains greater than 50% polyunsaturated fatty acids of which 35‐40% is α‐linolenic acid (C18:3ω3, ALA), an essential omega‐3 fatty acid 1 . While EPA and DHA from fish oils are more potent nutritionally, they are less stable than ALA. This work evaluated innovative blends of fish oil with camelina oil for stability and acceptability. The results demonstrate that there is potential for use of blends of camelina oil with fish oils in food products, as the results show some benefits in terms of reduction of fishy odours. Such information could be valuable in relation to formulation of food products containing high levels of n‐3 PUFA from both plant and fish sources.     

Oxidative and flavor stabilities of soybean oils with low-and ultra-low-linolenic acid composition

The effects of linolenic acid (18∶3) concentration, combined with TBHQ addition, temperature, and storage time, on the oxidative and flavor stabilities of soybean oils (SBO) were evaluated. During storage under fluorescent light at both 21 and 32°C, the SBO with ultra-low-18∶3 concentration (1.0%, ULSBO) generally had greater oxidative stability than did SBO with low-18∶3 concentration (2.2%, LLSBO). The ULSBO had about half the p-anisidine value of LLSBO throughout storage. Although the ULSBO initially had significantly greater PV and poorer (lower) sensory scores for overall flavor quality than did LLSBO, significant differences disappeared with storage. The ULSBO had a lower content of polar compounds and greater oil stability indices than did LLSBO when TBHQ was present. All oils were more oxidatively stable with TBHQ addition, but the TBHQ addition did not result in improved flavor stability early in storage. In all tests, oils stored at 32°C were less stable than oils stored at 21°C. The TBHQ had a better antioxidant capacity when the 18∶3 concentration was lower. The retardation effect of TBHQ on lipid oxidation and the improved stability of ULSBO over LLSBO were more easily detected when the storage temperature was higher.     

Effects of processing on the oxidative stability of soybean oil produced in Mexico

The stability parameters of 22 samples of soybean oil produced in Mexico were determined. Samples were analyzed for moisture, color, free fatty acids, peroxide value, p-anisidine value, fatty acid profile, metals, flavor, and Rancimat test for oxidative stability. Results obtained were compared with the stability parameters of soybean oil sproduced in the United States and Costa Rica. The fatty acid profile in all samples analyzed corresponded to the expected profile for a 100% soybean oil. Sixty-four percent of the oils had oxidative stabilities similar to those reported for soybean oils from the United States and Costa Rica. This suggests that in spite of the good quality, the soybean oil production process in Mexico needs further improvement. Especially important is maintaining appropriate control during the degumming and bleaching steps. Special consideration should be given to preserving the natural antioxidants present in the oil.     

Oxidative stability of blends and interesterified blends of soybean oil and palm olein

Improvement of oxidative stability of soybean oil by blending with a more stable oil was investigated. Autoxidation of blends and interesterified blends (9∶1, 8∶2, 7∶3 and 1∶1, w/w) of soybean oil and palm olein was studied with respect to fatty acid composition, fatty acid location and triacylglycerol composition. Rates of formation of triacylglycerol hydroproxides, peroxide value and volatiles were evaluated. The fatty acid composition of soybean oil was changed by blending. Linolenic and linoleic acids decreased and oleic acid increased. The triacylglycerol composition of blends and interesterified blends was different from that of soybean oil. Relative to soybean oil, LnLL, LLL, LLO, LLP, LOO and LLS triacylglycerols were lowered and POO, POP and PLP were higher in blends and interesterified blends (where Ln, L, O, P and S represent linolenic, linoleic, oleic, palmitic and stearic acids, respectively). Interesterification of the blends leads to a decrease in POO and POP and an increase in LOP. Linoleic acid concentration at triacylglycerol carbon-2 was decreased by blending and interesterification. Rates of change for peroxide value and oxidation product formation confirmed the improvement of soybean oil stability by blending and interesterification. But, blends were more stable than interesterified blends. Also, the formation of hexanal, the major volatile of linoleate hydroperoxides of soybean oil, was decreased by blending and interesterification.     

Participation of free fatty acids in the oxidation of purified soybean oil during microwave heating

Effects of 0 to 1.0% levels of caprylic, capric, lauric, myristic, palmitic or stearic acid on the oxidative stability of purified soybean oil were investigated under microwave heating conditions. A prooxidative effect of the fatty acids introduced into the systems was established. The extent of this effect depended on the acyl chin and levels of added fatty acids. During microwave heating, the oxidative rate of purified soybean oil by the fatty acids was rapid compared to the addition of their corresponding hydrocarbons; the shorter the chainlength and the higher the levels of fatty acids, the more accelerated was the thermal oxidation in the oil. The results are explained on the basis of the catalytic effect of the carboxylic group on the formation of free radicals by the decomposition of hydroperoxides. Therefore, particular attention should be paid to the free fatty acid content, which affects the oxidative stability of purified soybean oil.     

Oil stability index correlated with sensory determination of oxidative stability in light-exposed soybean oil

Validity of the oil stability index (OSI) as an accelerated test of oxidative stability has been questioned because of its high holding temperature, 110°C, which may cause reactions that would not occur at lower temperatures. The purpose of this study was to characterize the usefulness of OSI as an accelerated oxidative stability test for oil of varying metal catalyst content by correlating OSI with the sensory induction period of light-exposed soybean oil. Five 400-g aliquots of soybean oil were placed in Erlenmeyer flasks and treated with increasing levels of a metal pro-oxidant, Cu²⁺ 2-ethylhexanoate. Pro-oxidant concentration ranged from 0 to 3.13×10⁻⁵ M. Five-gram aliquots were taken from duplicate flasks and immediately tested using the Oxidative Stability Instrument. Heating block temperature was 110°C. Sample flasks were then exposed to 800 footcandles of light and held at ambient temperature for 3 wk. One-gram aliquots were regularly withdrawn and evaluated for rancidity by 10 trained panelists to determine the sensory induction period of each sample. Aliquots were also taken to determine OSI of light-exposed oil samples. Sensory induction periods were correlated with OSI, resulting in a squared partial correlation coefficient (r ²) of 0.920. The r ² for OSI of light-exposed oil samples ranged from 0.897 to 0.979. OSI appears to be an acceptable accelerated method for measuring the oxidative stability of light-exposed soybean oil that varies in metal catalyst content.     

Oil stability index correlated with sensory determination of oxidative stability in canola oil

The usefulness of the Oil Stability Index (OSI) as an accelerated oxidative stability test for canola oil was studied by correlating the OSI with the induction period as determined by sensory analysis. Canola oil was treated by holding it for differing times (0, 1, 2, 3, 4, and 6 d) at elevated temperature (60°C) in the dark with agitation. The sensory induction period (SIP) was determined by storing the five treatments of oil and the control at 60°C in the dark with agitation and removing aliquots of oil for a nine-member sensory panel to evaluate over a 9-d period. The time it took for a treatment to reach an average sensory score of 5 (10-point scoring scale) was defined as the treatment’s SIP. OSI values were obtained on day 0 using a heating block temperature of 110°C and an air pressure of 6 psi. The relationship between SIP and OSI had a 0.89 coefficient of determination (r ²). This relationship may be sufficiently strong to warrant use of the OSI in industry applications but may not be ideal for more precise experimental studies of canola oil shelf life.     

The effect of fatty acid composition on biodiesel oxidative stability

Concerning their environmental impact, native based fuels and lubricants show immense potential. In fact, these products are highly exposed to oxidative processes during storage or application [1, 2]. One way to raise oxidative stabilities is the addition of synthetic antioxidants. Another way may be the modification of the fatty acid composition, since polyunsaturated fatty acids show a much higher proneness to autoxidation. In order to decrease the content of polyunsaturated and to raise the content of saturated components, experiments for fractional distillation and crystallisation as well as for hydrogenation of fatty acid methyl esters have been carried out. In distillation experiments with separation columns the methyl esters performed good separation of the lower‐boiling esters with a chain‐length up to 16C‐atoms, from the C‐18 fraction, causing a degree of saturation up to 75 wt‐% in the distillate. In tests with fractional crystallisation, the rate of saturation could be raised up to 92.8 wt‐%. Using the process of catalytic hydrogenation, a rate of saturation up to 100 wt‐% could be achieved, depending on the duration of the hydrogenation process. By partial hydrogenation of the polyunsaturated components, products with high oxidation stability and low pour point could be produced within relatively short hydrogenation time.     

Oxidative stability of soybean oil products obtained by regioselective chemical interesterification

Oxidative stability of products produced as potential margarine basestock from soybean oil and methyl stearate by a novel chemical regioselective interesterification was evaluated. The oxidative stability of the products was evaluated by peroxide formation and volatile analysis during storage in the dark with oxygen at 60°C for 72 h. The product obtained by regioselective interesterification resulted in the lowest peroxide formation and volatile concentration sample in comparison with soybean oil and the randomized product of the regioselective interesterified product. Regioselective interesterification of soybean oil with methyl stearate produced a product with increased oxidative stability. Presented at 84th American Oil Chemists’ Society Annual Meeting, April 26–30, 1993, Anaheim, California.     

Effect of fatty acids and tocopherols on the oxidative stability of vegetable oils

The oxidative stability of vegetable oils is determined by their fatty acid composition and antioxidants, mainly tocopherols but also other non‐saponifiable constituents. The effect of fatty acids on stability depends mainly on their degree of unsaturation and, to a lesser degree, on the position of the unsaturated functions within the triacylglycerol molecule. Vegetable oils contain tocopherols and tocotrienols, especially α‐ and γ‐tocopherols, as their main antioxidants. The antioxidant behavior of tocopherols represents a complex phenomenon as they are efficient antioxidants at low concentrations but they gradually lose efficacy as their concentrations in the vegetable oils increase. The “loss of efficacy” of tocopherols, sometimes referred to as a “pro‐oxidant effect”, is witnessed by an increase in the rate of oxidation during the induction period, despite elongation of this phase. The phenomenon is much obvious for α‐tocopherol, but is also evident for other tocopherols. In agreement with nature's wisdom, the tocopherol levels in vegetable oils seem to be close to the optimal levels needed for the stabilization of these oils. The presence of other antioxidants in the oils, e.g. carotenoids, phenolic compounds, and Maillard reaction products, may synergize with tocopherols and minimize this loss of efficacy.