Regenerated cellulose fibers as impact modifier in long jute fiber reinforced polypropylene composites: Effect on mechanical properties,morphology, and fiber breakage

Polypropylene/jute fiber (PP‐J) composites with various concentrations of viscose fibers (VF) as impact modifiers and maleated polypropylene (MAPP) as a compatibilizer have been studied. The composite materials were manufactured using direct long fiber thermoplastic (D‐LFT) extrusion and compression molding. The effect of fiber length, after the extrusion process, on composites mechanical performance and toughness was investigated. The results showed that the incorporation of soft and tough VF on the PP‐J improved the energy absorption of the composites. The higher impact strength was found with the addition of 10 wt % of the impact modifier, but the increased concentration of the impact modifier affected the tensile and flexural properties negatively. Similarly, HDT values were reduced with addition of viscose fibers whereas the addition of 2 wt % of maleated polypropylene significantly improved the overall composite properties. The microscopic analysis clearly demonstrated longer fiber pullouts on the optimized impact modified composite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41301.     

Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites

Recently, graphene and its derivatives have been used to develop polymer composites with improved or multifunctional properties. Exfoliated graphite nanoplatelets (GNP) reinforced composite materials based on blend of polyethylene terephthalate (PET), and polypropylene (PP) compatibilized with styrene–ethylene–butylene–styrene‐g‐maleic anhydride is prepared by melt extrusion followed by injection molding. Characterization of the composites' microstructure and morphology was conducted using field emission scanning electron microscopy, transmission electron microscopy (TEM), X‐ray diffraction analysis (XRD), and Fourier transform infrared spectroscopy (FTIR). Tensile and impact strengths of test specimens were evaluated and the results showed maximum values at 3phr GNP in both the cases. Morphological studies showed that the GNPs were uniformly dispersed within the matrix. Results from XRD analysis showed uniformly dispersed GNPs, which may not have been substantially exfoliated. FTIR spectroscopy did not show any significant change in the peak positions to suggest definitive chemical interaction between GNP and the matrix. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40582.     

Bamboo fiber reinforced polypropylene composites and their mechanical,thermal, and morphological properties

Short bamboo fiber reinforced polypropylene composites were prepared by incorporation of various loadings of chemically modified bamboo fibers. Maleic anhydride grafted polypropylene (MA‐g‐PP) was used as compatibilizer to improve fiber–matrix adhesion. The effects of bamboo fiber loading and modification of the resin on the physical, mechanical, thermal, and morphological properties of the bamboo reinforced modified PP composites were studied. Scanning electron microscopy studies of the composites were carried out on the interface and fractured surfaces. Thermogravimetric analysis and IR spectroscopy were also carried out. At 50% volume fraction of the extracted bamboo fiber in the composites, considerable increase in mechanical properties like impact, flexural, tensile, and thermal behavior like heat deflection temperature were observed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Composition,tensile properties,and dispersion of polypropylene composites reinforced with viscose fibers

The reinforcement mechanics of viscose‐fiber‐reinforced polypropylene (PP) composites were studied. The effect of the coupling agent, maleated polypropylene (MAPP), was of special interest. The fibers, coupling agent, and PP were extruded and injection‐molded. The composition, mechanical properties, fracture morphology, and dispersion of the composites were examined. Thermogravimetric analysis showed that the fiber content in the tensile specimens varied slightly with the sample location; however, the differences in the values were within 1.0%. Scanning electron microscopy images of the fracture surfaces of the composites showed that the surfaces of the composites without MAPP were covered with fibers pulled out from the matrix. A lack of adhesion further appeared as a cracked matrix–fiber interface. A new scanning thermal microscopy method, microthermal analysis, was used to study the dispersion of the fibers in the composites. Local thermal analyses gave further information about the location of the fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2676–2684, 2004     

Thermal and dynamic mechanical behavior of epoxy composites reinforced with post-consumed yerba mate

Yerba mate (YM) is widely consumed in Latin American countries, and its residues can be used as bio-resources such as reinforced in epoxy composites. The present work aims to produce epoxy resin composites and evaluate the influence of post-consumed YM as reinforcement. The concentrations of YM used were 5, 10, and 20% (wt/wt). Chemical, thermal, morphological, and dynamic mechanical behaviors were explored. The YM incorporation did not influence chemically on the epoxy structure and a pull-out phenomenon was observed as YM content increased. The YM at lower concentrations (5 and 10%) led to higher values of activation energies calculated from model-free isoconversional methods. On the other hand, the composite e/YM 20 wt% improved all dynamic-mechanical properties. YM proved to be a suitable and cheap reinforcement for epoxy resin.     

Influence of process parameters on mechanical properties of physically foamed,fiber reinforced polypropylene parts

Due to the high complexity of the foaming technology, the relationship between processing and final properties of parts produced is not completely understood. Investigating the causality chain Processing–Morphology–Properties is of great importance, especially for the automotive industry, in order to be able to tailor the mechanical properties of foamed parts. This article examines and qualifies the effects of seven process parameters (melt/mold temperature, degree of foaming, injection speed, delay time, gas content, and back pressure) on biaxial bending and flexural behavior—the predominant deformation mechanisms in interior automotive applications—of foamed plaques, using the MuCell process. The results clearly show that three major factors (mold temperature, degree of foaming, and delay time) have significant impact on the mechanical properties of the foamed parts. For a clear understanding of these interactions, computed tomography scans of certain plaques are correlated to process parameters and mechanical performance. This article should forge a bridge between production and performance. © 2018 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47275.     

The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers

This article aims to prepare by injection molding recycled polymeric composites based on PA66 reinforced with short carbon fibers after artificial aging for applications in the automotive field. The aging cycles involves the combined action of UV radiation, moisture, and temperature in order to simulate the common outdoor conditions. The 100% recycled composites are obtained by the regranulation of the aged specimens followed by the remelting and re‐injection molding. The study is focused on the comparison between the mechanical behavior and the microstructure of the composites before and after mechanical recycling. The results of mechanical, thermal, and morphological investigations reveal that the recycling process had no significant effect on the final properties and microstructure of the recycled composites. Therefore the recycled PA66CF30 composites could be successfully used for structural or semi‐structural automotive applications guaranteeing good final performances and advantages from the environmental point of view. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42275.     

Rice husk/poly(propylene‐co‐ethylene) composites: Effect of different coupling agents on mechanical,thermal, and morphological properties

Poly(propylene‐co‐ethylene) composites with rice husk were prepared in a corotating intermeshing twin‐screw extruder using four different coupling agents. While modified maleic anhydrides such as maleated polypropylene (MAPP) and maleated polyethylene (MAPE) are commonly used as compatibilizers to improve interfacial adhesion between lignocellulosic filler and matrix, in this study, polypropylene grafted with acid comonomer (CAPP) and high‐density polyethylene grafted with acid comonomer (CAPE) were also used. The morphologies and the thermal and mechanical properties of the composites were characterized using scanning electron microscopy, thermogravimetric analysis, differential scanning analysis, tensile and impact tests. The results indicate that the base resin of the compatibilizer is an important factor in determining the effectiveness of compatibilizers for composites. Composites with PP‐based compatibilizers are more effective than PE‐based compatibilizers due to the improved wetting of the former compatibilizer in the matrix polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Nonlinear influences of process parameters on mechanical properties of physically foamed,fiber-reinforced polypropylene parts

The importance of foam injection molded components in industrial applications increases, above all driven by sustainability concerns. In practice, their applicability almost exclusively depends on their mechanical behavior, which is still difficult to predict based on their microstructure. This work aims to present an approach based upon phenomenological observations. From a processing perspective, the objective is to describe the direct processing-properties-relationship. Therefore, this work focuses on the effects of different processing parameters on selected final mechanical properties of foam injection molded components using glass fiber-reinforced polypropylene. A full factorial, central composite design allows for the detection of nonlinear effects, the application of response surface methodology, and the creation of contour plots. Considering three important process parameters (mold temperature, degree of foaming, delay time) and—for the automotive industry—highly important mechanical properties in bi- and uniaxial bending, the results show a detailed picture of individual dependences, but also two-dimensional interactions between the different process parameters. Improvements of more than 140% in absorbed energy and flexural stiffness were obtained at constant part weight. Modulus and strength were increased by 37 and 44%, respectively.     

Effect of chemical treatments on the mechanical,flow, and morphological properties of talc‐ and kaolin‐filled polypropylene hybrid composites

This study was performed with commercially available phenyl trimethoxysilane (PTMS) and neoalkoxytitanate [i.e., neopentyl(diallyl)oxytri(dioctyl)phosphato titanate (LICA 12)] as coupling agents. PTMS and LICA 12 were used to treat talc and kaolin to compare their effects with untreated fillers upon incorporation into polypropylene (PP). Single‐filler PP composites (containing either talc or kaolin) and hybrid‐filler composites (containing a mix of both talc and kaolin) were compounded in a twin‐screw extruder and subsequently injection‐molded into dumbbells. The incorporation of PTMS and LICA 12 slightly decreased the tensile and flexural properties in terms of modulus and strength but increased the elongation at break for both single‐filler and hybrid‐filler composites. There was also a significant improvement in the impact strength of the composites, particularly those treated with LICA 12. The hybrid composites, through the synergistic coalescence of positive characteristics from talc and kaolin with the aid from chemical treatment provided an economically advantageous material with mechanical properties comparable to those of the single‐filler‐filled PP composites. Further investigations on flow and morphological properties were also done to correlate the mechanical properties of the single‐ and hybrid‐filler‐filled PP composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of lubricants on the rheological and mechanical properties of wood flour/polypropylene composites

The lubricant is an indispensable agent used in wood plastic composites (WPCs) to improve the processing flowability, especially with high wood content. Here, the effects of different lubricating systems on the rheological and mechanical properties of wood flour/polypropylene (WF/PP) composites are investigated. Additionally, several theoretical models are used to describe the rheological behavior. The results show that stearic acid (SA), semirefined paraffin wax (Wax), and zinc stearate (ZnSt) can decrease the equilibrium torque, complex viscosity, relaxation time, and flow activation energy of the composite melts. Compared to a single lubricant, the combination of Wax and SA lubricants exhibits lower values and the composite with 3 wt % SA and 1 wt % Wax has the best lubricating effect. The synergistic effect of the combined SA and Wax lubricants further decreases the interactive force between the molecules, indicating that multifunctional lubricating systems play a predominant role in WPCs and improve the overall processing properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47667.     

Preferred orientation of chopped fibers in polymer-based composites processed by selective laser sintering and fused deposition modeling: Effects on mechanical properties

The orientation of reinforcing fibers in polymer-based composites greatly affects their mechanical features. It is known that different orientations of continuous fibers in the stacked layers of a laminate play a crucial role in providing an isotropic mechanical behavior, while the alignment of chopped fibers in injection molding of composites results in a degree of anisotropy. Recent additive manufacturing techniques have offered a way of controlling the fiber orientation. This article aims to investigate the effect of fiber orientation on the mechanical properties of polyamide/carbon fiber composites processed by fused deposition modeling and selective laser sintering. Tensile samples which had different fibers and layer interface with respect to the sample axis (and therefore to the tensile load) were produced. Tensile tests were performed at different strain rates; the tensile properties and the fracture surface morphology were correlated with the processing method and the sample microstructure. The best strength and stiffness were observed when the fibers and the layer interfaces were parallel to the sample axis.     

Effect of structure on mechanical properties of vinyl ester resins and their glass fiber‐reinforced composites

The article describes the effect of structure of vinyl ester resins (VE) on the mechanical properties of neat sheets as well as glass fabric‐reinforced composites. Different samples of VE were prepared by reacting ester of hexahydrophthalic anhydride (ER) and methacrylic acid (MAA) (1 : 1 molar ratio) followed by reaction of monomethacrylate terminated epoxy resin with glutaric (E) or adipic (F) or sebacic acid (G) (2 : 1 molar ratio). The neat VE were diluted with styrene and sheets were fabricated by using a glass mold. A significant reduction in the mechanical properties was observed by increasing the methylene content of resin backbone (i.e., sample E to G). Glass fabric‐reinforced composites were fabricated by vacuum assisted resin transfer molding (VARTM) technique. Resin content in the laminates was 50 ± 5 wt %. Increase in the number of methylene groups in the vinyl ester resin (i.e., increasing the bridge length) did not show any significant effect on limiting oxygen index (LOI) value (21 ± 1) of the laminates but tensile strength, tensile modulus, flexural strength, and flexural modulus all increased though these values are significantly lower than observed in laminates based on resin B. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Alfa fiber/polypropylene composites: Influence of fiber extraction method and chemical treatments

Alfa fiber/polypropylene composites were manufactured using twin-screw extrusion. Fibers were extracted using alkaline and steam explosion methods. Three chemical treatments were also applied to the alkaline-extracted fibers: stearic acid (SA), and potassium permanganate dissolved in water (KW) and in acetone (KA). Finally, thermal annealing was applied to the composites. The results indicate that composites with steam-exploded fibers had a significantly higher melt flow index than composites with alkaline-extracted fibers. Moreover, the incorporation of fibers into the matrix increased the Young's modulus, where the optimum results were obtained utilizing the alkaline-extracted fibers. Both extraction methods also significantly decreased the water uptake, especially the steam explosion. The three chemical treatments increased the melt flow index and conversely decreased the tensile strength and Young's modulus. In addition, KW treatment decreased the water uptake. Finally, thermal annealing increased the tensile strength and Young's modulus of composites with SA-treated fibers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47392.     

The mechanical and tribological properties of nitric acid‐treated carbon fiber‐reinforced polyoxymethylene composites

The carbon fibers have been exposed to nitric acid oxidation treatments and introduced into polyoxymethylene composites (POM/CF). The nitric acid treatment increases the number of the flaws, roughness of the surface, and disorder of carbon atoms on fiber, as well as introduces reactive functional groups, which could lead to a better mechanical bonding between fiber and the matrix. It is shown that the impact strength and fiber‐matrix adhesion in composites (POM/mCF) are superior to those for POM/CF composites. Simultaneously, the addition of mCF improves flexural strength and modulus relative to virgin POM significantly. Average friction coefficient values of POM/CF composites are lower than that of POM/mCF composites. As the percentage of fiber increases, the trend of wear ratio of the composites goes down initially and bumps up afterwards. The results indicate that the proper contents of CF and mCF in composites range from 5 wt % to 20 wt %. Scanning electron microscopy of worn surface morphology has revealed that the main wear mechanism of the composites were adhesive wear and ploughing wear. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41812.     

Physical and mechanical characterization of jute fabric composites

As‐received and washed jute fabrics were used as reinforcement for a thermoset resin. The mild treatments performed on the jute fabrics did not significantly affect their physical and thermal behaviors. The washed fibers absorbed less water than the unmodified (as received) ones, indicating that the coating used to form the fabrics was hygroscopic. Measurements of the fiber mechanical properties showed a high dispersion due to fiber irregularities, although the values obtained were in agreement with data reported in the literature. These results were also analyzed with the Weibull method. To investigate the effect of the jute treatments on the interface properties, impact, compression, and tensile tests were carried out. The composites made from as‐received jute had the highest impact energy, which was probably associated with weak interfacial adhesion. Composite samples behaved more ductilely in compression than in tensile situations due to the brittle characteristics of the resin used as matrix. The effect of the orientation of the fibers with respect to the direction of the applied force in the different mechanical tests was also studied. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 639–650, 2005     

Dynamic mechanical behavior of vinylester matrix composites reinforced by Luffa cylindrica modified fibers

Currently, there is a demand for new engineering materials presenting a combination of strength, low density, processing easiness, and reduced costs. In this context, polymer matrix composites reinforced by natural fibers have been studied in recent years due to their ecological and economic advantages. Some fibers are still little explored in literature despite presenting a great potential as reinforcement like Luffa cylindrica. The present work aims at the preparation and characterization of a vinylester thermoset matrix composite material reinforced by fibers of the natural L. cylindrica fruit after modification treatments. In this study, extraction treatments in organic solvents, mercerization, and a quite new esterification with BTDA dianhydrides were used and the results showed that in all cases, the composite materials reinforced by Luffa fibers have showed improvements in mechanical and thermal properties compared to the vinylester matrix. As an example, 50% tensile increase was obtained for the composite reinforced by fibers esterified with benzophenone tetracarboxylic dianhydride when compared with thermoset matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mechanical properties of short sisal fiber‐reinforced polypropylene composites: Comparison of experimental data with theoretical predictions

Sisal fibers were used for the reinforcement of a polypropylene (pp) matrix. Composites consisting of polypropylene reinforced with short sisal fibers were prepared by melt‐mixing and solution‐mixing methods. A large amount of fiber breakage was observed during melt mixing. The fiber breakage analysis during composite preparation by melt mixing was carried out using optical microscopy. A polynomial equation was used to model the fiber‐length distribution during melt mixing. The experimental mechanical properties of sisal/PP composites were compared with existing theoretical models such as the modified rule of mixtures, parallel and series models, the Hirsch model, and the Bowyer–Baders model. The dependence of the tensile strength on the angle of measurement with respect to fiber orientation also was modeled. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 602–611, 2003     

Cellulose/polypropylene composites: Influence of the molecular weight and concentration of oxidatively degraded and maleated polypropylene compatibilizers on tensile behavior

To improve interactions between fibrous cellulose (FC) and polypropylene (PP), oxidatively degraded polypropylene (DgPP) and maleated polypropylene (MAPP) were studied as compatibilizers. Both compatibilizers had the same mechanism, using esterification between the OH group in FC and the reactive (γ‐lactone, acid, and maleic anhydride) groups in the compatibilizers. However, the adhesion style with the ester bond was considerably different because of the arrangements of the reactive groups. DgPP had reactive groups at the polymer chain end, and the tensile behavior of the FC/PP/DgPP composite exhibited comparatively ductile behavior. However, MAPP had inner reactive groups, and the tensile behavior of the FC/PP/MAPP composite was quite brittle. Observation of these fracture surfaces suggested that the adhesion performance of the interface between FC and PP was strongly influenced by the arrangements of the reactive group. In addition, the performance was influenced by the molecular weight of DgPP and by the content of maleic anhydride groups in MAPP. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Natural rubber composites reinforced with sisal/oil palm hybrid fibers: Tensile and cure characteristics

Natural rubber was reinforced with untreated sisal and oil palm fibers chopped to different fiber lengths. The influence of fiber length on the mechanical properties of the hybrid composites was determined. Increasing the fiber length resulted in a decrease in the properties. The effects of concentration on the rubber composites reinforced with sisal/oil palm hybrid fibers were studied. Increasing the concentration of fibers resulted in a reduction in the tensile strength properties and tear strength but an increase in the modulus of the composites. Fiber breakage analysis was evaluated. The vulcanization parameters, processability characteristics, and stress–strain properties of these composites were analyzed. The extent of fiber alignment and the strength of the fiber–rubber interface adhesion were analyzed from the anisotropic swelling measurements. Scanning electron microscopy studies were performed to analyze the fiber/matrix interactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2305–2312, 2004