Study on mechanical,thermal and shape memory properties of polycarbonate/thermoplastic polyurethane blends

The objective of the study is preparation of shape memory blend of polycarbonate (PC) and thermoplastic polyurethane (TPU). Polycarbonate is blended with three types of TPUs and subsequently mechanical, thermal, morphological, and shape memory properties of the PC/TPU blends are studied. When TPU content in the blend is higher than 40% (by weight), the glass transition temperature related to PC is not shown in the differential scanning calorimetry thermogram, indicating loss of PC properties. The 60/40 optimized blend of PC/TPUs exhibits maximum increment of about 1100% in elongation and 43% decrement in tensile strength. The shape recovery of the optimized blend obtained by addition of 40% (by weight) of TPUs in PC polymer is found to be 65% and shape fixity is 97%. These results suggest that the blend of PC/TPU may be utilized for various applications where shape memory property is required including strategic applications.     

Mechanical and thermal properties of polyurethane elastomers based on hydroxyl‐terminated polybutadienes and biopitch

Biopitch is a renewable source of polyol obtained from Eucalyptus tar distillation, which was studied as an active component of polyurethane (PU). The polymerization occurred in one step, with a mixture of biopitch and hydroxyl‐terminated polybutadiene polyols reacted with 4‐4′‐diphenyl methane diisocyanate in the presence of dibutyltin dilaurate. Solid‐state ¹³C‐NMR, IR spectroscopy, elemental analysis, and thermal analysis [thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC)] were used to characterize the biopitch. The biopitch sample showed an aromatic and oxygenated structure with great thermal stability at high temperatures. Multiphasic PUs were synthesized and characterized by IR spectroscopy (attenuated total reflectance), elemental analysis, thermal analysis (TGA and DSC), mechanical assays (tensile strength, elongation at break, toughness, hardness, and resilience), and water absorption resistance (ASTM D 570‐81). In a comparative study of the synthesized elastomers, biopitch content increased tensile strength and hardness and decreased thermal stability, elongation at break, and water absorption. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 759–766, 2003     

Comparison of properties of thermoplastic polyurethane elastomers with two different soft segments

Two series of thermoplastic polyurethane elastomers [poly(propylene glycol) (PPG) based PP samples and poly(oxytetramethylene)glycol (PTMG) based PT samples] were synthesized from isophorone diisocyanate (IPDI)/1,4-butanediol (BD)/PPG and IPDI/BD/PTMG. The IPDI/BD based hard segments contents of polyurethane prepared in this study were 40–73 wt %. These polyurethane elastomers had a constant soft segment molecular weight (average M_n, 2000) but a variable hard segment block length (n, 3.5–17.5; average M_n, 1318–5544). Studies were made on the effects of the hard segment content on the dynamic mechanical thermal properties and elastic behaviors of polyurethane elastomers. These properties of PPG based PP and PTMG based PT samples were compared. As the hard segment contents of PP and PT samples increased, dynamic tensile modulus and α-type glass transition temperature (T_g) increased; however, the β-type T_g decreased. The permanent set (%) increased with increasing hard segment content and successive maximum elongation. The permanent set of the PT sample was lower than that of the PP sample at the same hard segment content. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1349–1355, 1998     

Polyoxymethylene/thermoplastic polyurethane blends compatibilized with multifunctional chain extender

Novel compatibilized polyoxymethylene/thermoplastic polyurethane (POM/TPU) blends are successfully developed using multifunctional chain extender, Joncryl ADR‐4368, as the compatibilizer. The outstanding compatibilization efficiency of Joncryl on POM/TPU blend was demonstrated by its even higher mechanical properties with only 0.5 wt % of Joncryl than those with 5 wt % of three commonly used compatibilizers. Addition of only 0.5 wt % Joncryl can double the impact strength and significantly improve its tensile strength and flexural strength for POM/TPU (75/25) blend. SEM images show that Joncryl can reduce TPU particle size and enhance the interfacial interactions between POM and TPU. The interparticle distance of TPU in POM/TPU/Joncryl blends was calculated as 0.2 μm, quite close to the critical matrix ligament thickness of POM/TPU blends (0.18 μm). The impact force profile vividly shows that the addition of Joncyl in POM/TPU blends can dramatically increase the total impact energy absorbed by this blend system and enhance the interfacial interactions between POM and TPU. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermodynamically and kinetically favored locations of rice husk ash particles in the phase structure,and the properties of epoxidized natural rubber/thermoplastic polyurethane blends

This article aims to study the influences of the selective location of rice husk ash (RHA) particles on morphological, mechanical, and dynamic properties of epoxidized natural rubber and thermoplastic polyurethane blends (ENR/TPU). Thermodynamic aspects, that is, interfacial tension and work of adhesion were assessed from estimates based on surface tension. It was found that the RHA particles had stronger interactions with the ENR than the TPU, of the co‐continuous phases. The phase structure was mainly controlled by kinetic factors, particularly by the mixing sequence, and to a lesser degree by thermodynamics. Furthermore, the microstructure with RHA particles dispersed in the ENR co‐continuous phase was found to give enhanced mechanical properties. This might be attributed to the higher work of adhesion between ENR and RHA that stabilized the encapsulated RHA particles against shear and elongational stresses, during melt mixing and in the final products. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46681.     

Shape‐memory behavior of thermally stimulated polyurethane for medical applications

Shape memory polymers (SMPs) have been of great interest because of their ability to be thermally actuated to recover a predetermined shape. Medical applications in clot extracting devices and stents are especially promising. We investigated the thermomechanical properties of a series of Mitsubishi SMPs for potential application as medical devices. Glass transition temperatures and moduli were measured by differential scanning calorimetry and dynamic mechanical analysis. Tensile tests were performed with 20 and 100% maximum strains, at 37 and 80°C, which are respectively, body temperature and actuation temperature. Glass transitions are in a favorable range for use in the body (35–75°C), with high glassy and rubbery shear moduli in the range of 800 and 2 MPa respectively. Constrained stress–strain recovery cycles showed very low hysteresis after three cycles, which is important to know for preconditioning of the material to ensure identical properties during applications. Isothermal free recovery tests showed shape recoveries above 94% for MP5510 thermoset SMP cured at different temperatures. One material exhibited a shape fixity of 99% and a shape recovery of 85% at 80°C over one thermomechanical cycle. These polyurethanes appear particularly well suited for medical applications in deployment devices such as stents or clot extractors. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3882–3892, 2007     

High performance polylactic acid/thermoplastic polyurethane blends with in-situ fibrillated morphology

As an environment-friendly polyester, polylactic acid (PLA) shows great potential market value. While it still faces some obstacles in large-scale practical application due to its brittleness. In this work, a novel strategy to improve the toughness of polylactic acid is developed. By adjusting processing temperature during the melt-blending process, thermoplastic polyurethane/poly (D-lactic) acid/poly (L-lactic) acid (TPU/PDLA/PLLA) ternary blends with different morphology are obtained. The experimental results show that the TPU in ternary blends formed a fibrillated micro-morphology, and the interfacial compatibility between the components is improved when the processing temperature is adjusted to 200°C. Under the synergistic action of in-situ fibrillated TPU and stereocomplex (SC) crystals, the toughness of the ternary blends is improved significantly without sacrificing its own tensile strength. The maximum value of tensile strength, elongation at break, and fracture work of ternary blends are 61.9 MPa, 23.5%, and 1038.9 kJ/m³, respectively. In addition, the melt strength of ternary blends was significantly improved, which is a benefit to their processing application.     

The overall crystallization behavior of polyethylene/wax blends as phase change materials for thermal energy storage: A mini review

This review paper deals with the overall crystallization behavior of polyethylene/wax blends as phase change materials (PCMs) for thermal energy storage with the determination of their thermal properties. The addition of molten wax to the polyethylenes decreases the crystallization and melting temperatures of the blends. However, incorporating fillers to the polyethylene/wax blends can either decrease or increase the crystallization and melting temperatures of the composites depending on the filler type. The normalized enthalpy values of linear low-density polyethylene showed no significant change when increasing the wax content. On the contrary, the normalized enthalpy values of the wax in the blends were lesser than that of pure wax and increased with increasing wax content. Since the wax in the blend had a lower crystallinity compared to pure wax, this influences its effectiveness as a PCM for thermal energy storage. The effect of different polyethylenes on the wax morphology gave rise to enhance phase separation when wax was blended to high-density polyethylene as compared to the other polyethylenes. On the contrary, the effect of various waxes on the morphology of polyethylene resulted in different morphologies due to the molecular weight of the wax used and the structure of the polyethylene chain. The addition of fillers to the polyethylene (PE)/wax samples resulted in enhanced phase separation. The overall isothermal crystallization rate and the equilibrium melting temperature of PEs in the PEs/wax blends were depressed by wax addition due to the wax dilution effect.     

Curing behavior and thermal mechanical properties of cyanate ester blends

Cyanate esters are a class of important thermally resistant polymers. To tailor their processability and thermomechanical properties, a series of cyanate ester blends based on a trifunctional novolac cyanate ester (HF‐5), a difunctional bisphenol E cyanate ester (HF‐9), and a reactive catalyst [2,2′‐diallyl bisphenol A (DBA)] were formulated. The effect of the blend composition on the rheology and curing behavior of these cyanate ester blends and the corresponding thermal and mechanical properties of the cured cyanate ester blends was studied. The results showed that HF‐5 contributed to good mechanical property retention at high temperatures because of its trifunctionality, whereas HF‐9 imparted processability by reducing the viscosity and extending the pot life of the formulated cyanate ester blends at the processing temperature. On the basis of the results, an optimal cyanate ester blend suitable for resin transfer molding was determined: the HF‐5/HF‐9/DBA weight ratio of 80 : 15 : 5 exhibited good processability and thermomechanical properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4284–4290, 2006     

Preparation and characterization of thermoplastic antistatic polyurethane synthesized by in situ polymerization

Antistatic polyurethane (APU) is prepared by in situ polymerization of polyester glycol (PEL), 4,4′‐diphenylmethane diisocyanate (MDI), 1,4‐butanediol (BDO), and antistatic agent (AA) formed by dissolving sodium salts in polyethylene glycol (PEG). Comprehensive properties of the APU are investigated by the FT‐IR, mechanical characterization, surface resistivity measurement, relative humidity (RH) study, and TGA, respectively. It is found that the surface resistivity of the APU can be effectively reduced to 10^9.15 Ω, showing a good antistatic property. Moreover, the APU maintains a low surface resistivity (～10^9.43 Ω) at the RH of 0.1%, revealing a non‐RH‐sensitive capacity of the APU. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39921.     

Waste ground rubber tire powder/thermoplastic vulcanizate blends: Preparation,characterization, and compatibility

In this article, waste ground rubber tire (WGRT) powder was introduced into thermoplastic vulcanizate (TPV) to prepare the blends of WGRT powder/TPV. The mechanical, rheological, thermal aging, and dynamic properties of the blends were investigated with respect to the particle size and dosage of WGRT powder. The results showed that tensile strength, tear strength, elongation at break, and tensile permanent deformation of the blends increased with the decrease in WGRT particle size and decreased with the dosage of WGRT. The effects of different types and dosages of compatibilizers on mechanical and rheological properties of the blends were studied. The results showed that the compatibilizer PP‐g‐MAH could effectively improve the interfacial compatibility between WGRT and the TPV matrix to enhance the comprehensive properties of blends. The TPV/WGRT/PP‐g‐MAH blends obtained the best overall properties when prepared at the weight ratio 100/30/5. Rheological studies demonstrated that the WGRT/TPV blends represented lower apparent viscosity after PP‐g‐MAH were added, which means that processing performance of the blends was improved by PP‐g‐MAH. Scanning electron microscopy was used to study the morphologies of the blends. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39868.     

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

To explore a potential method for improving the toughness of a polylactide (PLA), we used a thermoplastic polyurethane (TPU) elastomer with a high strength and toughness and biocompatibility to prepare PLA/TPU blends suitable for a wide range of applications of PLA as general‐purpose plastics. The structure and properties of the PLA/TPU blends were studied in terms of the mechanical and morphological properties. The results indicate that an obvious yield and neck formation was observed for the PLA/TPU blends; this indicated the transition of PLA from brittle fracture to ductile fracture. The elongation at break and notched impact strength for the PLA/20 wt %TPU blend reached 350% and 25 KJ/m², respectively, without an obvious drop in the tensile strength. The blends were partially miscible systems because of the hydrogen bonding between the molecules of PLA and TPU. Spherical particles of TPU dispersed homogeneously in the PLA matrix, and the fracture surface presented much roughness. With increasing TPU content, the blends exhibited increasing tough failure. The J‐integral value of the PLA/TPU blend was much higher than that of the neat PLA; this indicated that the toughened blends had increasing crack initiation resistance and crack propagation resistance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of fillers on thermal and mechanical properties of polyurethane elastomer

The effects of five different types of fillers on the thermal and mechanical properties of hydroxyl-terminated polybutadiene-based polyurethane elastomers were explored to develop a filled polyurethane elastomeric liner for rocket motors with hydroxyl-terminated polybutadiene-based composite propellants. Two type of carbon black, silica, aluminum oxide, and zirconium(III) oxide were used as filler. Based on the improvement in the tensile properties and the erosion resistance achieved in the first part of the study, an ISAF-type carbon black was selected to be used as the main filler in combination with an additional filler. The second part involves the investigation of polyurethane elastomers containing a second filler in various amounts in addition to the ISAF-type carbon black used as the main filler. In addition to the thermal and mechanical properties, the processability of the uncured polyurethane mixtures were also explored by measuring the viscosity in this second part of the study. The studied fillers do not considerbly change the thermal degradation temperatures and the thermal conductivity of the polyurethane elastomers with a filler content up to 16 wt %. The best improvement in the erosion resistance and tensile strength of the polyurethane elastomers with additional fillers is also achieved when filled with the ISAF-type carbon black, whereas the use of zirconium(III) oxide as additional filler provides almost no improvement in these properties. Viscosity of the uncured polyurethane mixtures increases with the increasing filler content and with the decreasing particle size of the filler. Aluminum oxide-filled elastomers seem to be the most suitable compositions having sufficiently high thermal and mechanical properties, together with the processability of uncured mixtures. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1057–1065, 1998     

Bio‐plastics and elastomers from polylactic acid/thermoplastic polyurethane blends

Blends of two biocompatible polymers: thermoplastic polyester‐urethane (TPU) and polylactic acid (PLA) were studied. The effect of the blending ratio on blend morphology and properties was examined by running a series of blends from 10 to 80 wt % of PLA. Increasing TPU concentration in the blends lowered the glass transition and melting point of PLA indicating that the components were compatible and partially miscible. The blends with 10–40 wt % PLA are hard, reinforced elastomers, while those with 60–80 wt % PLA are tough plastics. Cocontinuous morphology was suggested in samples with 40 and 50 wt % PLA. Inversion points between 30 and 40 wt % PLA (from globular phase is dispersed in the matrix to a cocontinuous morphology) and between 50 and 60 wt % PLA (a transition from cocontinuous to TPU dispersed in the PLA matrix) were observed. Elastomers with higher PLA content and intermediate morphology displayed a combination of high tensile strength, hardness, relatively high elongation and modulus. New materials have potential applications in the medical field. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41104.     

木质素/LDPE-EVA共混材料的力学性能及热性能

以天然热塑材料木质素和LDPE-EVA为原料,研究了不同木质素以及增容剂含量对木质素/LDPE-EVA共混材料的力学及热性能影响。结果表明,20份木质素与LDPE-EVA共混效果较好,拉伸强度达到最大（25.88 MPa）,较LDPE-EVA聚合物提高了9%,且共混物在100 ℃附近的吸热峰出现一定左移（3.6 ℃）,降解性能增加;10份增容剂LDPE-g-MAH的加入使体系拉伸强度达到35.66 MPa,较未加增容剂时提高了26.6%,100℃附近的吸热峰进一步左移（2 ℃）,降解性能小幅降低,显著提高了共混物的相容性。     

Dynamic vulcanization of polyethylene‐based thermoplastic elastomer blends

In this investigation, the effects of blending with ethylene–propylene–diene terpolymer and subsequent dynamic curing with sulfur on the macromolecular structure and properties of pure low‐density polyethylene and high‐density polyethylene were studied. The crosslinking efficiency of polyethylene‐based ethylene–propylene–diene terpolymer blends upon dynamic curing was assessed with torque and gel content measurements. The curing of dispersed ethylene–propylene–diene terpolymer in a polyethylene matrix improved both the mechanical and thermomechanical properties as a result of the formation of a crosslink structure in the rubber phase. In view of the electrical applications of this cured blend material, the volume resistivity was measured. The thermal stability of vulcanized polyethylene/ethylene–propylene–diene terpolymer blends was found to be superior to that of unvulcanized blends. In scanning electron microscopy analysis, good interface bonding between the polyethylene matrix and dispersed ethylene–propylene–diene terpolymer was observed for the cured blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Mechanical,thermal, and conductivity performances of novel thermoplastic natural rubber/graphene nanoplates/polyaniline composites

Conventional polymer blending has a shortcoming in conductivity characteristic. This research addresses the preparation of conductive thermoplastic natural rubber (TPNR) blends with graphene nanoplates (GNPs)/polyaniline (PANI) through melt blending using an internal mixer. The effect of PANI content (10, 20, 30, and 40 wt %) on the mechanical and thermal properties, thermal and electrical conductivities, and morphology observation of the TPNR/GNPs/PANI nanocomposites was investigated. The results showed that the tensile and impact properties as well as thermal conductivity of nanocomposite had improved with the incorporation of 3 wt % of GNPs and 20 wt % of PANI as compared to neat TPNR and reduced with further increase of the PANI content. It was observed that the GNPs and PANI acted as a critical component to improve the thermal stability and electrical conductivity of the TPNR/GNPs/PANI nanocomposites. The most improved conductivity of 5.22 E-5 S/cm was observed at 3 wt % GNPs and 40 wt % PANI. Variable-pressure scanning electron microscopy micrograph revealed the good interaction and distribution of GNPs and PANI within TPNR matrix at PANI loadings lower than 30 wt %. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48873.     

Morphology and mechanical properties of blends of thermoplastic polyurethane and polyolefins

Polyolefins (PO) were melt mixed with thermoplastic polyurethane (TPU) in a 20 : 80 weight ratio with or without compatibilizer containing 0.5 wt % of maleic anhydride. Effects of component viscosities on morphology and on mechanical properties of the blend were studied by scanning electron microscope (SEM), tensile property analysis, and dynamic mechanical analysis (DMA). It was found that the disperse particle size of compatibilizer‐free blends decreased with the decreasing viscosity ratio of the disperse phase to TPU. The efficiency of the compatibilizer in reducing the particle size varied with viscosity ratios of the disperse phase to compatibilizer. However, the particle size did not decrease with the decreasing viscosity ratio monotonically. With lower viscosity ratio, addition of 5 wt % compatibilizer resulted in a greater reduction of particle size and less loss in the tensile properties as compared to the TPU matrix. For the polyethene (PE) that has the lowest viscosity value among all the POs, its size in the blend was stabilized with the addition of compatibilizer and no compatibilization was detected by DMA and by tensile property analysis. The mobility of the disperse phase and compatibilizer and the dispersion competition between them seemed important. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 875–883, 2006     

Interfacial mechanical behavior of 3D printed ABS

We describe an experimental approach for characterizing the local mechanical behavior of acrylonitrile butadiene styrene (ABS) structures processed through fused deposition modeling. ABS test specimens processed in various build orientations were subject to multiscale mechanical tests as well as local morphology and chemical analyses. Instrumented indentation, local dynamic mechanical analysis, and atomic force microscopy tests were used to explore the mechanical behavior and morphology of build surfaces and weld interfaces. An interfacial stiffening effect was found for the majority of the specimens tested, with up to a 40% increase in the indentation elastic modulus measured with respect to the build surfaces. Raman spectroscopy mapping of the interfacial areas revealed ～30% less butadiene/styrene and butadiene/acrylonitrile ratios with respect to analysis of the build surfaces. The results provide insight into the multiscale behavior of additive manufactured structures and offer the potential to guide processing–structure–property understanding of these materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43671.     

Assembly of layered double hydroxide on multi‐walled carbon nanotubes as reinforcing hybrid nanofiller in thermoplastic polyurethane/nitrile butadiene rubber blends

An efficient approach has been applied to assemble MgAl layered double hydroxide onto pristine carbon nanotubes using sodium dodecylsulfate. The assembling process and formation of such hybrid nanostructures were established using X‐ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and high‐resolution transmission electron microscopy. Subsequently, the hybrid was used as nanofiller in the development of high‐performance thermoplastic polyurethane/acrylonitrile butadiene rubber (1:1 w/w) blend nanocomposites. Measurements of mechanical and dynamic mechanical properties show that tensile strength, elongation at break and storage modulus improve significantly by 171%, 1.8 times and 241% in a blend with 0.50 wt% loading of hybrid filler. Thermogravimetric analysis shows that the thermal stability of the blend with 0.50 wt% hybrid filler compared to neat material is maximally improved by 20 °C determined at 50% weight loss. Differential scanning calorimetry shows the maximum enhancement in melting temperature (7 °C) and crystallization temperature (31 °C) due to significant nucleation efficiency of the filler, homogeneous dispersion and strong interfacial interaction between polymer matrix and filler. © 2015 Society of Chemical Industry