Simulation and experimental analysis of an intelligent tissue for controlled drug delivery

In this research, an antibiotic was loaded in the composites of polyethylene glycol (PEG), acrylamide (AAm) and acrylic acid (AAc) hydrogels matrices and their drug deliveries were tested. Effect of some parameters on the drug delivery was checked by UV‐spectrophotometer. Temperature enhancement considerably increased hydrogel swelling and the drug release in the AAc and AAm. A dynamic model based on the Maxwell–Stefan equation was developed to model the drug delivery of hydrogels. COMSOL software was also applied to simulate buffer diffusion inside the hydrogels.     

Effect of graphene oxide on the pH-responsive drug release from supramolecular hydrogels

Polypseudorotaxane (PPR) hydrogels formed by inclusion complexes between poly(ethylene glycol) (PEG) and α-cyclodextrin (α-CD) are highlighted as promising biomaterial for drug delivery. Here, we report a novel injectable PPR hydrogel containing graphene oxide (GO) for pH-responsive controlled release of doxorubicin hydrochloride (DOX). Our results showed that the gelation rates of the PEG/α-CD supramolecular structures could be tailored depending on the reagent concentrations. The formation of PEG/α-CD inclusion complexes was confirmed by TEM and XRD, the latter further confirming that GO restricts their formation. The supramolecular hydrogels were easily loaded with DOX by simple addition into the PEG solution before the complex formation with the α-CD solution. Noteworthy, disruption of ionic interactions between DOX and GO in the nanocomposite at pH = 5.5 resulted in higher DOX release than under physiological conditions (pH = 7.4). This pH dependence was barely observed in pure PPR hydrogel. These findings introduce DOX-loaded supramolecular hydrogels nanocomposites as promising carriers for pH-responsive and therefore localized, drug delivery systems.     

Effect of polyethylene glycol molecular weight on cell growth behavior of polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol hydrogel

Polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC)/polyethylene glycol (PEG) hydrogel scaffolds are synthesized using cyclic freezing/thawing and subsequent γ-ray irradiation to evaluate the effect of the molecular weights of PEG (200, 400, 1,000, and 2,000) on strength and cell growth behavior of the hydrogels. As the PEG weight increases from 200 to 2,000, the compressive strength and the pore size decreases gradually from 58.0 ± 8.2 kPa to 17.7 ± 6.1 kPa and from 22.7 ± 3.9 μm to 8.5 ± 1.6 μm, respectively. However, the highest swelling rate is obtained for PVA/CMC/PEG400 hydrogels. The irradiated PVA/CMC/PEG400 hydrogels exhibit tailored properties of the swelling rate of 1,148 ± 34.0%, the compressive strength of 42.5 ± 6.6 kPa, the pore size of 14.6 ± 1.9 μm, and cell viability of 184%. In addition, the fastest L-929 cell proliferation and growth with time, verified by the cell proliferation (0–48 hr) and the scratch assay (0–15 hr), was observed for the PVA/CMC/PEG400 hydrogels, indicating that they are highly suitable for potential wound dressings that require fast healing regeneration.     

Solvent-, ion- and pH-specific swelling of poly(2-acrylamido-2-methylpropane sulfonic acid) superabsorbing gels

Homopolymer hydrogel of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and its nanocomposite counterpart were prepared to study their swelling properties. The hydrogels showed ability to absorb and retain electrolytes as well as binary mixtures of water and organic solvents (i.e., methanol, ethanol, acetone, ethylene glycol (EG), polyethylene glycol, N-methyl-2-pyrrolidone (NMP), and dimethylsulfoxide (DMSO). The nanocomposite gel exhibited lower swelling in all solvent compositions in comparison with non-composite gel. Unlike conventional acrylic acid-based hydrogels, the poly(AMPS) gels showed superabsorbing capacity in pure ethanol, methanol, EG, DMSO and NMP. Meanwhile, swelling capacity of poly(AMPS) hydrogel in DMSO-water mixtures was surprisingly found to be even higher than that in water. This extraordinary superswelling behavior was explained based on the interactions involved in solvation as well as the solubility parameters. The gels showed pH-independent superabsorbency in a wide range of pH (3–11). Saline-induced swelling transitions were also investigated and the ionic interactions were confirmed by FTIR spectroscopy.     

Release Dynamics of Brufen from a Drug-Loaded Polymer Hydrogel Containing Polyvinyl Alcohol, 2-Acrylamide-2-methylpropane Sulfonic Acid and Acrylamide

A novel AMPS-based hydrogel was synthesized, characterized, and its swelling and drug-release behaviour with brufen as model drug were studied in vitro. The results indicated that the swelling of the hydrogel is pH sensitive and follows the non-Fickian diffusion process. Swelling behaviour of brufen loaded and unloaded hydrogel was similar. The results of in-vitro drug release experiments showed that the hydrogel has sustained release properties and the release rate depends on the equilibrium swelling ratio of the hydrogels, pH of the release medium, and the solubility of the drug. It is believed that this hydrogel could be potentially used for localized drug delivery.     

Controlled dual release study of curcumin and a 4‐aminoquinoline analog from gum acacia containing hydrogels

The potential of gum acacia containing hydrogels as controlled dual‐drug delivery systems for antiprotozoal agents was investigated. 4‐Aminoquinoline analog and curcumin were selected as model drugs because they exhibit antiprotozoal activity. The maximum release time was greater for curcumin than for the 4‐aminoquinoline analog at 37°C, thereby enabling the active ingredients to work over different periods of time. 4‐Aminoquinoline analog exhibited a short term release profile while curcumin exhibited a sustained and long term release profile. The release profiles of the drugs were found to be influenced by the degree of crosslinking of the hydrogel network with gum acacia. The release profiles were analyzed using a power law equation proposed by Peppas. The release mechanism of the 4‐aminoquinoline was found to be anomalous transport while that of curcumin was quasi‐Fickian diffusion mechanism in all the hydrogel networks according to the release exponent. The preliminary results suggest that these systems are potential dual‐drug delivery system for antiprotozoal agents with different pharmacokinetics. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41613.     

PCL microsphere/PEG-based composite hydrogels for sustained release of methadone hydrochloride

Hydrogels have increasingly received considerable attention for local opioids delivery in order to sustained wound pain relief. However, burst release of drugs is a critical problem of hydrogels. To this aim, a local drug delivery system consisting of polycaprolactone (PCL) microspheres containing methadone hydrochloride/polyethylene glycol (PEG)-based hydrogels were developed to prolong drug release with potential utilization in pain treatment. Four different drug delivery systems, including methadone hydrochloride/PEG-(N₃)₄-based hydrogel, methadone hydrochloride/PEG-(N₃)₂-based hydrogel, methadone hydrochloride/PCL/PEG-(N₃)₄, and methadone hydrochloride/PCL/PEG-(N₃)₂ composite hydrogels, were fabricated to investigate drug release profiles of these systems. The results showed that drug released can be controlled by both the double-barrier matrix (hydrogel/microsphere), and the crosslinking density of hydrogels. Therefore, methadone hydrochloride/PCL/PEG-(N₃)₂ composite hydrogel with high crosslinking density has great potential application in sustained release systems for wound pain relief. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48967.     

Photopolymerized hydrogel composites from poly(ethylene glycol) and hydroxyapatite for controlled protein delivery in vitro

The incorporation of hard particles into soft hydrogels can improve the mechanical properties and provide necessary bioactivity to the hydrogels for desired biomedical applications. Hydrogel composites containing hydroxyapatite (HA) are promising materials for orthopedic applications. In this study, injectable poly(ethylene glycol) (PEG) hydrogel precursor solutions containing HA particles and model protein bovine serum albumin (BSA) were synthesized in situ by photopolymerization. In vitro BSA release properties from the hydrogel composites containing various amounts of HA were investigated and discussed. Fourier transform infrared spectroscopy and scanning electron microscopy were employed to investigate the interaction between HA and the hydrogel network and the morphology of the hydrogel composites. It is found that PEG hydrogel composites containing HA sustained the release of BSA for at least 5 days and the presence of HA slowed down BSA release. Photopolymerized hydrogel composites containing HA may find potential use as a drug delivery matrix for orthopedic tissue engineering. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Dual release kinetics of antimalarials from soy protein isolate‐carbopol‐polyacrylamide based hydrogels

The currently used antimalarials suffer from drug resistance which is hampering the global management of malaria infection. To overcome drug resistance, they are administered as combination therapies which involve combination of two or more antimalarials. In this study, chloroquine diphosphate and curcumin were encapsulated onto prepared soy protein isolate‐carbopol‐polyacrylamide based hydrogels. The hydrogels were pH sensitive and exhibited enhanced swelling capability at pH 7.4. The hydrogels were biodegradable which was observed by their SEM images after drug release. The release mechanisms of both drugs were influenced by the degree of crosslinking of the soy protein isolate in the hydrogel network and the presence of the other drug in the network. The release mechanisms of both drugs from the hydrogel networks followed super case transport II. These results suggested that the hydrogels were potential dual drug delivery systems for antimalarials whereby both drugs could work over different period of time and hence, have the potential to overcome drug resistance that is common with the presently used antimalarials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43918.     

Synthesis of dual physical self-healing starch-based hydrogels for repairing tissue defects

Hydrogels have the potential to simulate and permeate body tissues. They can be used in many biomedical applications, such as drug delivery, wound dressings, contact lenses, synthetic implants, biosensors, and tissue engineering. Despite recent significant advances in hydrogel fabrication, with the introduction of double network hydrogels, with ionic or hydrogen bonds, there is still the challenge of achieving optimal mechanical properties with appropriate self-healing ability. To solve the above problem, in this study, a new type of starch/chitosan/PVA/borax hydrogel was synthesized by adopting the one-pot method. The effect of concentration and ratio of raw materials on the final properties of hydrogels, such as the degree of hydrophilicity, morphology, degradation, mechanical strength, and drug release rate, was investigated. The properties of hydrogels were examined by scanning electron microscopy, thermogravimetric analysis, Fourier-transform infrared spectroscopy, X-ray diffractometry, and contact angle, which confirmed the composite synthesis and uniform distribution of HNT and curcumin. In addition, the composite hydrogel showed excellent mechanical properties. Drug release studies confirmed that the drug is slowly released from the nanocomposite hydrogels. The results showed that starch-based nanocomposite hydrogels could provide appropriate repairing potential for defects exposed to changeable parameters.     

Synthesis of polyhedral oligomeric silsesquioxane nano‐crosslinked poly(ethylene glycol)‐based hybrid hydrogels for drug delivery and antibacterial activity

The synthesis is reported of novel hybrid hydrogels based on ethylenediaminetetraacetic acid dianhydride and poly(ethylene glycol) (PEG) with octa‐aminopropyl polyhedral oligomeric silsesquioxane hydrochloride salt (OA‐POSS) as a nano‐crosslinker under solvent‐free conditions. The molecular weight of PEG was varied between 600 and 1000 Da. The synthesized hydrogels were characterized using various techniques. Further, the swelling behavior and antibacterial activity of the hydrogels and release kinetics of metronidazole (MTZ) as a model drug from them were evaluated. Experimental results demonstrate that hydrogels with tunable properties can be synthesized by varying the PEG molecular weight and type of crosslinker (hybrid or organic). Among the synthesized hybrid hydrogels, that crosslinked by OA‐POSS with long PEG chains (1000 Da) showed the highest swelling degree (2000%), drug encapsulation efficiency (88%) and extent of MTZ release (96%). © 2018 Society of Chemical Industry     

A novel gastric release PEG‐enclatherated polymethacrylate‐based memblet system

A novel polymethacrylate‐based membranous system referred to as a “memblet” was developed for potential application in controlled gastric drug delivery. A polymethacrylate‐based latex, Eudragit® E100, was enclatherated with a 60% w/v and a 30% w/v solution of polyethylene glycol 4000 to form hydrogel formulations A and B, respectively. The hydrogels were subsequently compressed into memblets that were characterized for thermal, rheological, morphological, mechano‐chemical properties, and in vitro gastric drug release analysis. Molecular mechanics (MM) simulations were performed to corroborate the experimental findings. Critical yield values of 15.39 and 5.239 Pa were obtained for hydrogel A and B, respectively. The viscoelastic region was found to be <10.67 and 2.542 Pa for hydrogels A and B, respectively. The storage modulus was greater than the loss modulus for hydrogel A while the inverse was true for hydrogel B. Thermal, mechanical, and surface morphology evaluation revealed that the converse was true for the dried membrane structure with hydrogel B having superior characterization profiles than hydrogel A. Notably, the lower PEG concentration (30% w/v) displayed better characterization profiles than a higher concentration (60% w/v). Through MM simulations, desirable agreement between the theoretical and experimental results was achieved over the given concentration range of PEG. Based on the gastric drug release analysis, memblets formulated with hydrogel B displayed superior control of drug release. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Self‐Healing,Injectable Gelatin Hydrogels Cross‐Linked by Dynamic Schiff Base Linkages Support Cell Adhesion and Sustained Release of Antibacterial Drugs

A new class of dynamic hydrogels made through Schiff base bonds based on gelatin (type A and B) and polyethylene glycol dibenzaldehyde (diBA‐PEG, 2000 and 4000 g mol^?1) is developed. Hydrogels form in situ by mixing aqueous solutions of gelatin and diBA‐PEG at a carefully adjusted pH. Compression test shows that the samples based on gelatin A are able to withstand at least ten cyclic loading/unloading without crack formation and significant permanent deformation. Self‐healing behavior of the hydrogel is proved by rheological measurements and also visual method. This hydrogel is proven to be injectable and nontoxic. Performance of the hydrogel in loading and delivery of clindamycin hydrochloride, as an antibacterial model drug, is evaluated against Staphylococcus aureus via antibacterial activity test. In vitro release of clindamycin hydrochloride is studied through an innovative method and it becomes clear that the release of clindamycin hydrochloride from this hydrogel follows a zero‐order kinetics.     

Dual‐Crosslinked Human Serum Albumin‐Polymer Hydrogels for Affinity‐Based Drug Delivery

A dual‐crosslinked in situ gelling drug delivery scaffold based on dextran (DEX), thiolated serum albumin, and poly(ethylene glycol) (PEG) is presented. Dextran–vinyl sulfone conjugates with varied molecular weight and degrees of substitution are synthesized by controlling the reaction time and temperature with divinyl sulfone. Dextran–human serum albumin (sHSA) hydrogels are prepared using a thiol‐vinyl sulfone Michael addition reaction with thiolated albumin as the crosslinker. Poly(ethylene glycol) dithiol is added as a third component to the crosslinked dextran–human serum albumin hydrogel to facilitate additional crosslinking, and reduce gelation time, while modulating the physicochemical properties of the Dex–sHSA–PEG network. The onset of gelation of the modular three‐component dual‐crosslinked hydrogel network ranges from 45 min to 1.5 h depending on gel constituent concentrations and the gelation temperature (25 or 37 °C). All gels remain stable for over a 25 d period under physiological conditions. In vitro drug release assays show that dual‐crosslinked Dex–sHSA–PEG hydrogels can deliver doxorubicin in a sustained manner over 7 d. Finally, a Tetrazolium‐based assay shows the biocompatible nature of the Dex–sHSA–PEG hydrogels and capacity to deliver doxorubicin successfully to MCF‐7 breast cancer cells.     

Synthesis and characterization of novel pH-, ionic strength and temperature- sensitive hydrogel for insulin delivery

A series of novel silane crosslinked hydrogel was prepared from kappa carrageenan (KC), acrylic acid (AA) using vinyltriethoxysilane (VTESi). Potassium persulphate initiated the grafting and copolymerization reactions between reactants. In addition, the condensation of the hydroxyl groups of KC and VTESi resulted into crosslinking. Novelty of this work is the use of VTESi as crosslinker for such a composition of hydrogel. The structure of prepared hydrogels was characterized by Fourier transform infrared spectroscopy. The analysis of spectra confirmed the presence of feed components in the prepared hydrogels. Thermogravimetric analysis showed an increase in the stability of the hydrogels either having high AA contents or crosslinker amount. The effect of feed components, pH (buffer, non-buffer), electrolytic media and temperature on the swelling behaviour of the hydrogels is reported here.Most promising results with high swelling ratio were observed in hydrogel having low monomeric ratio (KC:AA = 1:7). pH response of this hydrogel in acidic and neutral pH makes it suitable for drug delivery application. Insulin, a protein based drug was selected as a model drug. It requires its delivery in small intestine for proper action; therefore its release behaviour was studied in-vitro in simulated stomach and intestinal fluids. The release profile of insulin showed negligible release in simulated gastric fluid (SGF) and sustained release in simulated intestinal fluid (SIF). The obtained results are in good agreement with the swelling response of this hydrogel. The weak structure of this hydrogel makes it preferable for drug delivery, as it is able to get crumbled after releasing the drug for 6 h at neutral pH.     

Mechanical properties and drug release rate of poly(vinyl alcohol)/poly(ethylene glycol)/clay nanocomposite hydrogels: Correlation with structure and physical properties

Poly(vinyl alcohol)/poly(ethylene glycol) hydrogels containing curcumin as a drug and the various amounts of a montmorillonite nanoclay are prepared using the freezing–thawing method. Nanoclay quantity influence on the physicomechanical properties and the drug release rate of the hydrogel as well as relationship between them is investigated. X-Ray diffraction and Atomic force microscopy analysis reveal the nanoclays have an intercalation structure in the hydrogel, and the hydrogel crystallization decreases with increasing the nanoclay inclusion. From the SEM micrographs observation, it was revealed that due to the presence of the nanoclay in the hydrogel, its porosity decreased. The naonoclay has an amount-depended dual effect on the hydrogel swelling. The swelling mechanism is a normal Fickian diffusion for all the hydrogel samples. Strong physical interactions between the nanoclays and the polymer chains in the nanocomposite hydrogels are evidenced by the rheological studies. These interactions lead to significant reinforcement of the hydrogel tensile strength, intensified by the nanoclay amount. Interestingly, the nanoclays show the capability of accelerating and, also, decelerating the drug release of the hydrogel. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47843.     

pH-sensitive IPN hydrogel based on poly (aspartic acid) and poly (vinyl alcohol) for controlled release

Various pH-sensitive sequential interpenetrating polymer network (IPN) hydrogels were prepared by introducing poly (vinyl alcohol) (PVA) hydrogel into Poly (aspartic acid) (PASP) hydrogel by freeze-thawing treatment to obtain a novel drug delivery system to the intestine. The structure and the morphologies of the prepared hydrogels were studied by Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM). The thermal behavior and crystallinity of the hydrogels were characterized by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Their pH-sensitive properties moreover were studied and the results revealed that both PASP hydrogel and IPN hydrogels exhibited excellent pH-sensitivity. Furthermore, the controlled drug release properties of the hydrogels were also evaluated and results indicated that by increasing the PVA fraction in the IPN hydrogel, the release of Naproxen sodium was improved. These results show that the IPN hydrogels could be a suitable carrier for site-specific drug delivery in the intestine.     

Radiation crosslinking and sorption properties of hydrogels based on 1‐vinyl‐2‐pyrrolidone,hydroxyethyl methacrylate,and their copolymers

This work has been concerned with the synthesis of the hydrogels of poly (vinyl pyrrolidone) (NVP), poly (hydroxy ethylmethacrylate) (HEMA), and their copolymer under the effect of gamma radiation in the presence of N,N‐methylenebisacryl‐amide (MBAm) as a crosslinking agent. The effect of the different factors that may affect the gelation and yield product, such as solvent composition and irradiation dose, was investigated. The formed hydrogels were characterized in terms of swelling in water and different organic solvents, X‐ray diffraction (XRD), and IR spectroscopic analysis. The sorption capability of these hydrogels towards some commercial basic and acid dyesstuffs was also studied. The results showed that a solvent mixture composed of equal contents of water and methanol is the most suitable to afford the minimum sol fraction and the highest yield product at a minimal irradiation dose of 10 kGy. It was observed that NVP hydrogel displayed the highest swelling in water, alcohols, and dimethyformamide of ～1300% and a lower tendency to swell in nonpolar solvents. The results showed that HEMA hydrogel has a high affinity to absorb basic dyes while NVP has a tendency for acid dyes. Also, the sorption of either the basic or acid dyes by the different hydrogels was found to greatly depend on the concentration of dye in solution and the mass of the used hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3274–3280, 2004     

Preparation a novel pH‐sensitive blend hydrogel based on polyaspartic acid and ethylcellulose for controlled release of naproxen sodium

Hydrogels based on pH‐sensitive polymers are of great interest as potential biomaterials for the controlled delivery of drug molecules. In this study, a novel, pH‐sensitive hydrogel was synthesized by poly(aspartic acid) (PASP) crosslinked with 1,6‐hexanediamine and reinforced with ethylcellulose (EC). The loading and release characteristics of naproxen sodium (NS) were studied. The PASP–EC blend hydrogels had pH‐sensitive characteristics and were strongly dependent on the pH value. The release kinetics for NS from the PASP–EC blend hydrogels and PASP hydrogel were evaluated in simulated gastric fluid (pH = 1.05) and simulated intestinal fluid (pH = 6.8) at 37°C. The results showed that the drug‐loaded hydrogels were resistant to simulated gastric fluid, and hence, they could be useful for oral drug delivery. Compared with the PASP hydrogel, the PASP–EC blend hydrogels showed a lower release rate of NS in the same pH conditions. It was evident that the presence of hydrophobic groups (EC) retarded the release of NS and led to sustained release. The kinetics of NS release from the drug‐loaded hydrogels conformed to the Korsmeyer–Peppas model. The release exponent of the model was 0.7291, which indicated multiple drug release. The PASP–EC blend hydrogels were biodegradable and pH sensitive; there would be a wide range of applications for them in controlled drug‐delivery systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel metronidazole-loaded hydrogel as a gastroretentive drug delivery system

A metronidazole-loaded hydrogel was synthesized by free radical polymerization using dimethylaminoethyl methacrylate (DMAEMA) monomer and triethyleneglycol dimethacrylate (TEGDA) and methylene bisacrylamide (MBA) as cross-linkers. The DMAEMA hydrogels were cross-linked with 5 and 10% MBA or with 0.1, 0.5, 1 and 4% TEGDA as cross-linking agents. Ammonium persulfate and tetramethyl ethylene diamine were used as initiator and catalyst, respectively. The prepared hydrogels were characterized, and the effect of cross-linking agent content on the swelling behavior and in vitro drug release of hydrogels was investigated. The results of X-ray diffractometry, differential scanning calorimetry and Fourier transform infrared spectroscopy studies indicated that the prepared hydrogels possessed an amorphous morphology and there was not any interaction between the hydrogel polymers and metronidazole as drug, which resulted in the dependence of drug release on the physicochemical characteristics of hydrogel such as swelling, polymer erosion, and surface morphology. According to the results, the hydrogel containing 0.5% TEGDA which was prepared by freeze-drying method exhibited a porous structure with a high swelling ratio and displayed a sustained and complete drug release. It could be concluded that the hydrogel developed by this facile method is a good candidate with a potential for use in gastroretentive drug delivery systems.