Integrated PLGA–Ag nanocomposite systems to control the degradation rate and antibacterial properties

Biodegradable polymer based nanocomposite materials have attracted much attention since they can be used for biomedical and pharmaceutical applications. In order to have highly integrated PLGA nanocomposite materials, silver colloidal nanoparticles were prepared in chloroform starting from silver nitrate and using polyvinylpyrrolidone as reduction and capping agent. TEM and AFM imaging give information on the size distribution of the silver nucleus (7.0 nm) and the capping shell (8.2–10.7 nm). PLGA–Ag nanocomposites were prepared upon addition of 1 or 3% wt of silver nanoparticles to the PLGA/chloroform suspension. The effect of silver loading on polymer degradation was studied following the mass loss and the morphology of nanocomposite films at different degradation stages. The concentrations of Ag⁺, which is released during nanocomposite degradation, were monitored and analyzed through the diffusion model, to have insight on the degradation kinetics. The release rate, and likely the degradation rate, was reduced at higher silver loading. Bacterial growth tests indicated that the cell growth is inhibited in the presence of PLGA–Ag nanocomposites and the efficiency is correlated to Ag⁺ release. Thus, controlling the nanoparticle loading, a tunable degradation and antibacterial action can be designed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1185‐1193, 2013     

Fabrication of antibacterial silver nanoparticle‐modified chitosan fibers using Eucalyptus extract as a reducing agent

Green chemical method could be a promising route to achieve large scale synthesis of nanostructures for biomedical applications. Here, we describe a green chemical synthesis of silver nanoparticles (Ag NPs) on chitosan‐based electrospun nanofibers using Eucalyptus leaf extract. A series of silver salt (AgNO₃) amounts were added to a certain composition of chitosan/polyethylene oxide aqueous acetic acid solution. The solutions were then electrospun to obtain nanofibrous mats and then, morphology and size of nanofibers were analyzed by scanning electron microscopy (SEM). Incubation of AgNO₃‐containing mats into Eucalyptus leaf extract led to the formation of Ag NP clusters with average diameter of 91 ± 24 nm, depicted by SEM and transmission electron microscopy. Surface enhanced Raman spectroscopy also confirmed formation of Ag NPs on the nanofibers. The mats also showed antimicrobial activity against Escherichia coli and Staphylococcus aureus bacteria with bigger inhibition zone for extract‐exposed mats against S. aureus. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42133.     

Hydrophilic goethite nanoparticle as a novel antifouling agent in fabrication of nanocomposite polyethersulfone membrane

The goethite nanoparticle was used as a multifunctional additive to fabricate antifouling polyethersulfone (PES) nanofiltration membranes. The goethite/PES membranes were synthesized via the phase inversion method. The scanning electron microscopy (SEM) photographs showed an increase in pore size and porosity of the prepared membranes with blending of the goethite. The static water contact angle measurements confirmed a hydrophilic modification of the prepared membranes. With increase in the goethite content from 0 to 0.1 wt %, the pure water flux increased up to 12.7 kg/m² h. However, the water permeability decreased using high amount of this nanoparticle. Evaluation of the nanofiltration performance was performed using the retention of Direct Red 16. It was observed that the goethite/PES membranes have higher dye removal capacity (99% rejection) than those obtained from the unfilled PES (89%) and the commercial CSM NE 4040 NF membrane (92%). In addition, the goethite/PES blend membranes showed good selectivity and antifouling properties during long‐term nanofiltration experiments with a protein solution. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43592.     

ZnO microparticle-loaded chitosan/poly(vinyl alcohol)/acacia gum nanosphere-based nanocomposite thin film wound dressings for accelerated wound healing

The present study deals with the development of novel ZnO microparticle-loaded chitosan/poly(vinyl alcohol)/acacia gum nanosphere-based nanocomposite thin films through electrospraying and evaluation of their potential use in wound healing applications for skin. ZnO microparticles were synthesized and used as bioactive agents. Morphology, size distribution, structure, and dispersion of the synthesized ZnO microparticles were analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy (TEM). ZnO microparticles were incorporated into the ternary nanocomposite films by electrospraying technique. Thermogravimetric analyses reveal that incorporation of ZnO microparticles into the nanocomposite structure improves the thermal stability. Mechanical analyses show that tensile strength reaches to the maximum value of 12.75 MPa with 0.6 wt % ZnO content. SEM and TEM micrographs demonstrate that the nanocomposite films consist of nanospheres with nanocapsular structures whose sizes are mostly between 250 and 550 nm. Viability tests established prevailing cellular performance of the fibroblasts on 0.6 wt % ZnO microparticle-loaded nanocomposite films with a viability percentage of 160% compared to the control group. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48445.     

PEGylation of MnO nanoparticles via catechol–Mn chelation to improving T1‐weighted magnetic resonance imaging application

To enhance biocompatibility and physiological stability of hydrophobic MnO nanoparticles as contrast agent of T₁‐weighted magnetic resonance imaging (MRI), dopamine‐functionalized poly(ethylene glycol) (PEG) was used to coat the surface of about 5 nm MnO nanoparticles. Although hydrophilic coating might decrease longitudinal relaxivity due to inhibiting the intimate contact between manganese of nanoparticle surface and proton in water molecules, higher longitudinal relaxivity was still maintained by manipulating the PEGylation degree of MnO nanoparticles. Moreover, in vivo MRI demonstrated considerable signal enhancement in liver and kidney using PEGylated MnO nanoparticles. Interestedly, the PEGylation induced the formation of about 120 nm clusters with high stability in storing and physiological conditions, indicating passive targeting potential to tumor and prolonged circulation in blood. In addition, the cytotoxicity of PEGylated MnO nanoparticles also proved negligible. Consequently, the convenient PEGylation strategy toward MnO nanoparticles could not only realize a good “trade‐off” between hydrophilic modification and high longitudinal relaxivity but also contribute additional advantages, such as passive targeting to tumor and long blood circulation, to MRI diagnosis of tumor. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42360.     

Optimized synthesis,characterization, and antibacterial activity of an alginate–cupric oxide bionanocomposite

In this research, the structural features and optimal conditions for the synthesis of an alginate–CuO nanocomposite with the highest antibacterial activity were investigated. CuO nanoparticles (NPs) and the alginate biopolymer were synthesized chemically and biologically, respectively. Nine nanocomposite compounds were produced on the basis of the Taguchi method with different levels of CuO NPs and the alginate biopolymer nanocomposite with different stirring times. Fourier transform infrared spectroscopy, high‐resolution field emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy analysis confirmed the formation of the nanocomposites. The nanocomposite synthesized with 8 mg/mL copper oxide NPs and 2 mg/mL alginate biopolymer with 60 min of stirring time showed the highest antibacterial activity. The results of two colony forming units and disk‐diffusion methods indicated a stronger antibacterial activity of the alginate–CuO nanocomposite compared with those of its components. The alginate–CuO nanocomposite showed the potential ability to act as an antimicrobial agent against Gram‐negative and Gram‐positive bacteria. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45682.     

Multi stimuli-responsive HPC-PAA/Eu(AA)3Phen complex nanogels and their decoration with 3-APBA for detecting glucose

In this paper, novel multi stimuli-responsive complex nanogels of hydroxypropylcellulose (HPC)-PAA/Eu(acrylic acid [AA])₃Phen were synthesized by radical polymerization method with HPC, rare earth complex (Eu(AA)₃Phen) and AA as raw materials, and the 3-aminophenylboronic acid (3-APBA) decorated nanogels (HPC-PAAPBA/Eu(AA)₃Phen) were fabricated via condensation of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride with 3-APBA. The microstructure, morphology and diameter of the nanogel were characterized by Fourier transform infrared spectrometer, UV–Visible spectrophotometer, transmission electron microscope, dynamic light scattering. Moreover, the fluorescence responsive performance of complex nanogels to temperature, pH value and glucose concentration was investigated by photoluminescence spectroscopy. The results showed that both of the as-prepared nanogels were uniform in size and had good monodispersity. The temperature and pH value had significant effects on the particle size and the fluorescence emission intensity of the HPC-PAA/Eu(AA)₃Phen complex nanogels; after decoration with 3-APBA, the obtained HPC-PAAPBA/Eu(AA)₃Phen nanogels showed excellent stimulus-response to glucose concentration.     

Effectiveness of PANI/Cu/TiO2 ternary nanocomposite on antibacterial and antistatic behaviors in polyurethane coatings

Surfaces with antibacterial and antistatic functionalities are one of the new demands of todays' industry. Therefore, a facile method for the preparation of multifunctional polyaniline/copper/TiO₂ (PANI/Cu/TiO₂) ternary nanocomposite based on in situ polymerization is presented. This nanocomposite was characterized through the different techniques and was utilized for induction of antibacterial and antistatic properties in polyurethane coatings. Measurement of the conductivity of PANI/Cu/TiO₂ ternary nanocomposite indicated higher electrical conductivity of this nanocomposite compared to pure PANI. The antibacterial activity of the modified polyurethane coatings was tested against Gram-positive and Gram-negative bacteria which led to remarkable reduction in bacterial growth. Besides, it was observed that polyurethane coating with 2 wt % content of ternary nanocomposite has a surface electrical resistance equal 4 × 10⁸ Ω/sq which acquires surface electrical resistance of standard antistatic coatings. The final coatings were also characterized in terms of thermal and mechanical properties to investigate the effect of the ternary nanocomposite on improvement of these properties. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48825.     

Plasmonic device based on a PAAm hydrogel/gold nanoparticles composite

Stimuli‐resposive hydrogels, such as poly(acrylamide), are smart materials that can be loaded with gold nanoparticles to explore the localized surface plasmon resonance effect to develop an optical device. Here we used electropolymerized poly(acrylamide) hydrogel for entrapped gold nanoparticles into gel structure (composite) to prepare a plasmonic device. Sensing tests were performed; for this bovine serum albumin molecules were placed into the composite by diffusion from an aqueous solution. The presence of the molecules alters the refractive index around the gold nanoparticles, changing its resonance conditions. The plasmonic band shifted ～3.8 nm when the composite was incubated at the 20 µg/mL bovine serum albumin solution, which is a result comparable to reports elsewhere using gold nanoparticles on glass substrates. The device showed that it was possible to detect significantly low concentrations up to 10 ng/mL of protein in aqueous solution. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42449.     

Antimicrobial cytocompatible pentaerythritol triacrylate‐co‐trimethylolpropane composite scaffolds for orthopaedic implants

As of 2010, 5.3 million orthopedic surgeries are performed each year, and this number is expected to increase to 6.2 million by 2020. On average, 27.7% of all orthopedic surgeries result in infection which often leads to osteomyelitis and the loss of supporting bone. In this study, we describe two synthetic bone grafts, or augmentation methods, for a biodegradable, silver nanoparticle (SNPs) containing antimicrobial scaffolds composed of pentaerythritol triacrylate‐co‐trimethylolpropane tris (3‐mercaptopropionate) (PETA) and hydroxyapatite (HA). This osteoinductive and degradable material is designed to stimulate proliferation of bone progenitor cells, and provide controlled release of antimicrobial components. The first method, denoted as the “incorporating method,” involves dissolving SNPs in ethanol, butanol, or isopropanol and directly incorporating the particles into the scaffold prior to polymerization. The second method, “coating method,” involves submerging fabricated scaffolds into their respective SNPs‐solution and mixing for 24 h. The coating method allowed better distribution and release of SNPs from the surface of the composites when exposed to extracellular media. The in vitro release of silver for both methods was quantified by inductively coupled plasma optical emission spectroscopy (ICP‐OES). The scaffolds made by means of the coating method showed increased release of silver with respect to time; no silver leached from the scaffolds formed by the incorporating method. Use of Alamar Blue assay demonstrated that the SNPs incorporation did not affect cell viability when tested with hASCs. The scaffolds formed by the coating method inhibited the proliferation of Staphylococcus aureus 99.5% and Escherichia coli by 99.9% within 24 h. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41099.     

Preparation and characterization of mPEG‐g‐α‐zein biohybrid micelles as a nano‐carrier

A new kind of block copolymer micelles methoxy polyethylene glycol (mPEG) grafted α‐zein protein (mPEG‐g‐α‐zein) was synthesized. The chemical composition of mPEG‐g‐α‐zein was identified with the help of FT‐IR and ¹H‐NMR. The biohybrid polymer can self‐assemble into spherical core–shell nanoparticles in aqueous solution. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to investigate the self‐assembled morphology of mPEG‐g‐α‐zein. Dynamic light scattering (DLS) results showed that the particle size of mPEG‐g‐α‐zein was about 90 nm. Moreover, the nanoparticles had a very low critical micelle concentration value with only 0.02 mg/mL. Then, the anticancer drug curcumin (CUR) was encapsulated into the biohybrid polymer micelles. The in vitro drug release profile showed a zero‐order release of CUR up to 12 h at 37°C. Cell viability studies revealed that the mPEG‐g‐α‐zein polymer exhibited low cytotoxicity for HepG2 cells (human hepatoma cells). Consequently, the mPEG‐g‐α‐zein micelles can be used as a potential nano‐carrier to encapsulate hydrophobic drugs and nutrients. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42555.     

Novel,promising, and broadband microwave-absorbing nanocomposite based on the graphite-like carbon nitride/CuS

In this study, a broadband, intense, novel, and promising microwave-absorbing nanocomposite was prepared using graphite-like carbon nitride (g-C₃N₄)/CuS suspended in poly(methyl methacrylate) (PMMA) medium. The g-C₃N₄ nanosheets were synthesized by heating the urea as well as the CuS nanoparticles, and g-C₃N₄/CuS nanocomposites were prepared using a solvothermal method and then were separately molded by a PMMA solution to investigate their microwave-absorbing characteristics. The Fourier transform infrared and X-ray powder diffraction were used to characterize the g-C₃N₄, CuS, and CuS/g-C₃N₄ nanostructures, which confirmed that the pure structure of the nanomaterials has been synthesized. The optical properties of the nanostructures were also investigated by diffuse reflection spectroscopy analysis. Accordingly, the Kubelka–Munk theory suggested significant narrow band gap for g-C₃N₄/CuS nanocomposite (0.27 eV), facilitating electron jumping and conductive loss. The morphology of the structures was examined using field emission scanning electron microscopy micrographs, illustrating that the uniform hexagonal structures of the CuS nanoplates have been formed and the CuS two-dimensional structures were uniformly distributed on the g-C₃N₄ nanosheets. Finally, the microwave-absorbing properties of the CuS, g-C₃N₄, and g-C₃N₄/CuS were investigated by PMMA as a host. The microwave-absorbing properties were evaluated using a vector network analyzer. The results illustrated that the maximum reflection loss of the g-C₃N₄/PMMA nanocomposite was −71.05 dB at 14.90 GHz with a thickness of 2.00 mm, demonstrating a 1.70 GHz bandwidth >30 dB, as well as g-C₃N₄/CuS/PMMA nanocomposite absorbed 7.30 GHz bandwidth of more than 10 dB with a thickness of 1.80 mm along the x- and ku-band frequency. The obtained results introduced the PMMA as a capable microwave-absorbing substrate. Besides, the g-C₃N₄/CuS/PMMA nanocomposite demonstrated metamaterial property and abundant attenuation constant. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48430.     

Preparation and characterization of polyurethane/silica aerogel nanocomposite materials

In this investigation, silica aerogel (SA)/Rigid Polyurethane (PUR) foam composites and silica aerogel/Polyurethane (PU) composites were prepared by dry mixing of granular and grinded silica aerogels with polyol part. They were then combined with diisocyanate part. Three different types of PUR foams and an elastomeric coating grade of PU were studied as well. Results show that thermal conductivity of foams did not decrease by adding silica aerogel. It even increased for some grades which is assumed to be due to the change in cell configuration of these foams. It was also found that sound insulation performance of these cellular composites did not improve significantly. Unlike foam composites, addition of silica aerogel into elastomeric PU improved its thermal and acoustic insulation properties. Because of the more promising properties of elastomeric PU composites, further examinations including measurements of compression strength and water contact angle of silica aerogel/PU composites were also taken. Final results showed a significant improvement in general properties of PU coatings by adding little amounts of silica aerogel (1–4 wt %). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44521.     

High-flux PVDF/PVP nanocomposite ultrafiltration membrane incorporated with graphene oxide nanoribbones with improved antifouling properties

A novel polyvinylidene fluoride (PVDF) nanocomposite membrane containing graphene oxide nanoribbones (GONRs) as a new nanofiller and polyvinylpyrrolidone (PVP) as pore former agent was prepared via phase inversion method. GONRs were prepared by oxidative unzipping of multi-walled carbon nanotubes (MWCNTs) via chemical approach. Chemical vapor deposition method was used to synthesis MWCNTs. The effects of adding GONRs and PVP into the casting solution on morphology, hydrophilicity and pure water flux (PWF) of the prepared nanocomposite membranes were explored. Antifouling experiments were also performed. It was found that compared to the neat PVDF membrane, PWF of the PVDF/PVP, PVDF/(0.5GONRs) and PVDF/(0.5GONRs)/PVP membranes were improved 80%, 44.9%, and 241.6%, respectively. The obtained results showed that GONRs and PVP exhibit synergistic effects in controlling the membrane properties. This work shows that GONRs can be suitable as nanofiller for preparation of high performance PVDF ultrafiltration membranes with improved antifouling properties.     

Effect of protein adsorption on cell uptake and blood clearance of methoxy poly(ethylene glycol)‐poly(caprolactone) nanoparticles

The interactions between nanoparticles and cells or tissues are frequently mediated by different biomolecules adsorbed onto the surface of nanoparticles. In this study, several methoxy poly(ethylene glycol)‐poly(ε‐caprolactone) (mPEG‐PCL) copolymers with various mPEG/PCL ratios were synthesized and used to produce three types of mPEG‐PCL nanoparticles. The protein‐adsorption behavior of nanoparticles was assessed using fetal‐bovine‐serum (FBS) as a model protein. The cell uptake of nanoparticles at different nanoparticle doses as well as various culture periods was examined by measuring their endocytosis rate related to Hela cells cultured in FBS‐free and FBS‐contained media. The blood clearance of nanoparticles was evaluated using Kunming mice to see the differences in circulation durations of nanoparticles. Results suggest that that FBS is able to significantly regulate the cell uptake of nanoparticles in vitro, and on the other hand, the size and mPEG/PCL molar ratio of mPEG/PCL nanoparticles are closely correlated to their blood clearance. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42884.     

Highly antibacterial and toughened polystyrene composites with silver nanoparticles modified tetrapod‐like zinc oxide whiskers

In this work, high‐performance multifunctional composites were obtained by melt blending silver deposited tetrapod‐like zinc oxide whiskers (Ag‐ZnOw) with polystyrene (PS). The chemical, spectroscopic, antibacterial, mechanical, and morphological properties of the PS/Ag‐ZnOw composites were carefully investigated and discussed. The obtained PS/Ag‐ZnOw composites characterized remarkable antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Moreover, it is found that impact strength of the composite increase with increasing nanofiller concentration (up to 0.25 wt %). Morphological characterization of the impact fractured surface of composites revealed that toughening was achieved through uniform filler distribution in the polymer matrix, and anchoring effect was imparted by the tetrapod‐like shape of ZnO whiskers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40900.     

Positron annihilation and other experimental studies on polycarbonate/MPDMAPP nanocomposite

The composite films of polycarbonate (PC) filled with 1‐(4‐methylphenyl)‐3‐(4‐N,N‐dimethylaminophenyl)‐2‐propen‐1‐one (MPDMAPP) were prepared by solution casting. The FT‐IR results of the prepared films confirmed the hydrophobic and dipole‐dipole interaction between PC and MPDMAPP, which is a major driving force for the formation of charge transfer complex (CTC). UV–Vis absorption spectra showed three peaks and the optical band gap E_g for pure PC is 4.31 eV which decreased to 4.1 eV after 15 wt % doping. The fluorescence spectral results show a strong emission and quenching in the wavelength region 510 to 550 nm for 408 nm excitation due to increase in amorphousness, which is observed in X‐ray diffraction (XRD) results. The decrease in ortho‐positronium (o‐Ps) lifetime τ₃ and corresponding intensity I₃ from positron annihilation lifetime spectroscopy (PALS) and the S‐parameter from Doppler broadening measurements show both inhibition and quenching of Ps formation in the PC/MPDMAPP composite due to the presence of dimethylamino N(CH₃)₂ group. The mechanical properties such as Young's modulus, tensile strength, and stiffness increase with doping concentration and confirmed that the composite films are mechanically stable. The growth of nanostructures of MPDMAPP within PC films is studied with SEM and TEM images and confirms the uniform dispersion and interaction between the functional groups of PC and MPDMAPP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42053.     

Effects of interlayer density and surfactant on coupled thermal stress and moisture absorption in modified montmorillonite/polypropylene nanocomposite

Modified montmorillonite/polypropylene nanocomposites (NCs) are increasingly used in industrial applications such as subsea pipelines because hexadecyltrimethyl ammonium montmorillonite (HDTMA⁺-Mt) enhances thermomechanical and barrier properties of the amorphous polymer. Two coupled physics of moisture adsorption and thermal loading are investigated. Molecular dynamics simulates HDTMA⁺-Mt polymer NC using three force fields including polymer consistent force field and condensed-phase optimized molecular potentials, and embedded-atom method. Mechanical properties and self-diffusion coefficient are investigated at temperature levels of 100 and 298 K, and water content of 0.021 and 0.133 g/g. These properties are evaluated at 1.0 atm pressure for four different volume fractions (vol%) of the HDTMA⁺-Mt. The modeling procedure is verified by obtaining the glass transition temperature (T_g) of the NC by scanning the temperature from 200 K (glassy state) up to 325 K (rubbery state). It is observed that the T_g is very close to the experimental value available in the literature. The result of the modeling shows that the increase of clay content of the NC decreases the self-diffusion coefficient of the material. It is seen that the clay nanoparticle can significantly hinder the degradation of mechanical properties of the NC even when both temperature and water content increase.     

Synthesis of poly(butyl acrylate)—laponite nanocomposite nanoparticles for improving the impact strength of poly(lactic acid)

This work aims at preparing and characterizing poly(butyl acrylate) (PBA)—laponite (LRD) nanocomposite nanoparticles and nanocomposite core (PBA‐LRD)‐shell poly(methyl methacrylate) (PMMA) nanoparticles, on the one hand, and the morphology and properties of poly(lactic acid) (PLA)‐based blends containing PBA‐LRD nanocomposite nanoparticles or (PBA‐LRD)/PMMA core–shell nanoparticles as the dispersed phase, on the other hand. The PBA and (PBA‐LRD)/PMMA nanoparticles were synthesized by miniemulsion or emulsion polymerization using LRD platelets modified by 3‐methacryloxypropyltrimethoxysilane (MPTMS). The grafting of MPTMS onto the LRD surfaces was characterized qualitatively using FTIR and quantitatively using thermogravimetric analysis (TGA). The amounts of LRD in the PBA‐LRD nanocomposites were characterized by TGA. The PBA/PMMA core–shell particles were analyzed by ¹H‐NMR. Their morphology was confirmed by SEM and TEM. Mechanical properties of (PBA‐LRD)/PLA blends and (PBA‐LRD)/PMMA/PLA ones were tested and compared with those of the pure PLA, showing that core–shell particles allowed increasing impact strength of the PLA while minimizing loss in Young modulus and tensile strength. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

SiO2-modified nanocomposite nanofiltration membranes with high flux and acid resistance

Thin-film nanocomposite (TFN) nanofiltration (NF) membranes with superior properties were prepared using hydrophilic SiO₂ (HGPN-SiO₂) nanoparticles as the inorganic modifying monomer by an interfacial polymerization (IP) process. The effects of HGPN-SiO₂ on the morphology and surface properties of the prepared NF membranes were characterized by attenuated total reflectance–Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, atomic force microscopy, surface zeta potential, and static contact angle. The addition of HGPN-SiO₂ can effectively improve the permeate flux of the NF membranes. When the HGPN-SiO₂ concentration in the aqueous phase was 0.08 wt %, the permeate flux of the TFN-NF membrane was twice that of the pure NF membrane. Furthermore, the acid resistance of the TFN-NF membrane was clearly improved with the addition of HGPN-SiO₂. Under neutral conditions, the TFN-NF membrane showed superior flux and salt rejection stability in a long-running operation. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47436.