Dielectric,thermal and mechanical properties of hybrid PMMA/RGO/Fe2O3 nanocomposites fabricated by in-situ polymerization

Currently, the organic-inorganic hybrid materials have gained tremendous importance due to their unique applications in different technological fields. In this connection, the chemical synthesis of poly(methyl methacrylate) (PMMA) and its binary and ternary nanocomposites by in-situ bulk polymerization with various percentages of reduced graphene oxide (RGO) and hematite nanoparticles (Fe₂O₃ NPs) is presented. Dielectric properties of binary and ternary nanocomposites are investigated in the frequency range of 25 Hz-1 MHz for each composition. Ternary nanocomposite of PMMA with RGO:Fe₂O₃ NPs (2:2 wt%) exhibits a substantial enhancement of the dielectric constant up to ≈308 and suppressed dielectric loss of 0.12 at 25 Hz. Appearance of three types of interfaces in ternary PMMA nanocomposites accounts for the superior dielectric properties due to the accumulation of greater number of charges at the interfaces as compared to the binary nanocomposites with only one interface. The same optimized ternary PMMA nanocomposite shows a remarkable improvement in the thermal conductivity (2.04 W/mK), which is attributed to the formation of efficient thermal conducting pathways contributed by the synergic reduction in thermal resistance of both RGO and Fe₂O₃ NPs (2:2 wt%) relative to the binary nanocomposites PMMA/2 wt% RGO (1.04 W/mK) and PMMA/2 wt% Fe₂O₃ (0.98 W/mK). Thus, ternary nanocomposites prove to be the excellent candidates for thermal management applications. Furthermore, a comparison of the mechanical strength and thermal stability for all the binary and ternary nanocomposites is presented. In the last section, respective precursors and optimized binary and ternary nanocomposites are characterized by XRD, FTIR and SEM which reveal the strong interaction of respective nanofillers into PMMA matrix.     

Preparation of novel hydrophobic magnetic Fe3O4/waterborne polyurethane nanocomposites

Magnetic Fe₃O₄/waterborne polyurethane nanocomposites were synthesized based on waterborne polyurethane (WPU) and amino-functionalized Fe₃O₄ by in situ polymerization. The Fe₃O₄ nanoparticle was found to be uniformly distributed in Fe₃O₄/WPU nanocomposites with linear or crosslinked structure. In addition, the formation mechanism and magnetic conduction mechanism of stable inorganic–organic nanocomposites were discussed. The experimental results showed that the thermal stability, magnetic, and mechanical properties of magnetic Fe₃O₄/waterborne polyurethane nanocomposites were improved by amino functionalized Fe₃O₄. Furthermore, the defoaming property of the emulsion and the hydrophobic property of magnetic Fe₃O₄/waterborne polyurethane nanocomposites were improved by the 1-hexadecanol-terminated prepolymer. What more, polycaprolactone (PCL)-based Fe₃O₄/WPU nanocomposites have excellent mechanical properties (The tensile strength is over 30 MPa, the elongation rate is above 300%.) and magnetic properties. Magnetic Fe₃O₄/waterborne polyurethane nanocomposites will be used in the field of hydrophobic and microwave absorbent materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48546.     

Synthesis and characterization of (Fe3O4/MWCNTs)/ epoxy nanocomposites

A sonochemical technique is used for in situ coating of iron oxide (Fe₃O₄) nanoparticles on outer surface of MWCNTs. These Fe₃O₄/MWCNTs were characterized using a high‐resolution transmission electron microscope (HRTEM), X‐ray diffraction, and thermogravimetric analysis. The as‐prepared Fe₃O₄/MWCNTs composite nanoparticles were further used as reinforcing fillers in epoxy‐based resin (Epon‐828). The nanocomposites of epoxy were prepared by infusion of (0.5 and 1.0 wt %) pristine MWCNTs and Fe₃O₄/MWCNTs composite nanoparticles. For comparison purposes, the neat epoxy resin was also prepared in the same procedure as the nanocomposites, only without nanoparticles. The thermal, mechanical, and morphological tests were carried out for neat and nanocomposites. The compression test results show that the highest improvements in compressive modulus (38%) and strength (8%) were observed for 0.5 wt % loading of Fe₃O₄/MWCNTs. HRTEM results show the uniform dispersion of Fe₃O₄/MWCNTs nanoparticles in epoxy when compared with the dispersion of MWCNTs. These Fe₃O₄/MWCNTs nanoparticles‐infused epoxy nanocomposite shows an increase in glass transition (T_g) temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Bimagnetic hard/soft and soft/hard ferrite nanocomposites: Structural,magnetic and hyperthermia properties

Recent studies show that the chemical composition and shape of magnetic nanoparticles (NPs) play an important role in their properties. In particular, the bimagnetic NPs display useful and in many cases, more interesting properties than single-phase NPs. In this work, we prepared Fe₃O₄ and CoFe₂O₄ cube-like NPs and bimagnetic hard/soft (CoFe₂O₄/Fe₃O₄) and soft/hard (Fe₃O₄/CoFe₂O₄) nanocomposites (core/coating) using a facile and eco-friendly co-precipitation method that allows the synthesis of the cube-like NPs at temperatures near room temperature. The phase purity and the crystallinity of the NPs with a spinel structure were confirmed by the X-ray diffraction and infrared spectra techniques. Transmission electron microscopy (TEM) images revealed that the NPs have a cubic-like shape with an average dimension of 20 nm. Energy dispersive X-ray analysis, Mössbauer spectroscopy and SQUID magnetic measurements indicated the co-existence of Fe₃O₄ and CoFe₂O₄ phases in nanocomposites. In addition, the hysteresis loops exhibited a single-phase behavior in the nanocomposites that indicates there is a good exchange-coupling interaction between the hard and soft magnetic phases. The CoFe₂O₄/Fe₃O₄ nanocomposites presented a larger saturation magnetization than the CoFe₂O₄ NPs that is effective for their use in magnetic hyperthermia. Finally, we studied the hyperthermia properties of samples in an alternating magnetic field with a frequency of 276 kHz and field amplitude of 13.9 kA/m. Our results showed that magnetic hyperthermia efficiency simultaneously depends on the composition of samples along with magnetic anisotropy and saturation magnetization.     

Envisioning the composition effect on structural,magnetic, thermal and optical properties of mesoporous MgFe2O4-GO nanocomposites

The effect of variation in composition on the structural, magnetic, optical and photo catalytic activity of magnesium ferrite (MgFe₂O₄) -graphene oxide (GO) nanocomposites was studied. Magnetic nanocomposites of GO and MgFe₂O₄ nanoparticles (NPs) with varying w/w ratio were synthesized by facile sonication method. X-Ray diffraction patterns confirmed the presence of spinel ferrite phase in the nanocomposites with the crystalline size 8–32 nm. Fourier transformation infrared (FT-IR) spectra of the nanocomposites displayed absorption bands corresponding to GO and MgFe₂O₄ NPs along with red shift of bands corresponding to C=O, C=C and O-H stretching. Thermo gravimetric analysis confirmed higher stability of nanocomposites over pristine GO. Saturation magnetization increased from 3.63 to 11.10 emu/g with the increase in content of MgFe₂O₄ NPs in the nanocomposites. Scanning electron microscopy analysis along with energy dispersive spectroscopy (SEM-EDX) confirmed the presence of MgFe₂O₄ NPs along with GO sheets. Immobilization of clusters of MgFe₂O₄ NPs onto GO sheets was evident from transmission electron micrographs (TEM) of all the nanocomposites. BET surface area of the nanocomposites ranged from 63.04 to 165.29 m²/g and was maximum when GO:MgFe₂O₄ w/w ratio was 1:0.5. It was markedly higher than pristine GO and MgFe₂O₄ NPs. Optical studies revealed lowering of the band gap in the nanocomposites upto 2.21 eV as compared to pristine MgFe₂O₄ NPs. Photoluminescence (PL) spectra of nanocomposites displayed quenching of PL intensity with increase of GO content. Band gap also displayed similar trend. The synthesized nanocomposites were used as photocatalysts for methylene blue dye degradation under visible light irradiation. The nanocomposite with GO to MgFe₂O₄ ratio 1:0.5 displayed best activity with complete degradation of dye in 30 min. The results confirmed that the composition of GO based magnetic nanocomposites can be tailored for efficient removal of contaminants.     

The synthesis and characterization of monodispersed chitosan-coated Fe3O4 nanoparticles via a facile one-step solvothermal process for adsorption of bovine serum albumin

Preparation of magnetic nanoparticles coated with chitosan (CS-coated Fe₃O₄ NPs) in one step by the solvothermal method in the presence of different amounts of added chitosan is reported here. The magnetic property of the obtained magnetic composite nanoparticles was confirmed by X-ray diffraction (XRD) and magnetic measurements (VSM). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) allowed the identification of spherical nanoparticles with about 150 nm in average diameter. Characterization of the products by Fourier transform infrared spectroscopy (FTIR) demonstrated that CS-coated Fe₃O₄ NPs were obtained. Chitosan content in the obtained nanocomposites was estimated by thermogravimetric analysis (TGA). The adsorption properties of the CS-coated Fe₃O₄ NPs for bovine serum albumin (BSA) were investigated under different concentrations of BSA. Compared with naked Fe₃O₄ nanoparticles, the CS-coated Fe₃O₄ NPs showed a higher BSA adsorption capacity (96.5 mg/g) and a fast adsorption rate (45 min) in aqueous solutions. This work demonstrates that the prepared magnetic nanoparticles have promising applications in enzyme and protein immobilization.     

Magnetoresistive polyaniline-magnetite nanocomposites with negative dielectrical properties

Magnetic polyaniline (PANI) polymer nanocomposites (PNCs) reinforced with magnetite (Fe₃O₄) nanoparticles (NPs) have been successfully synthesized using a facile surface initiated polymerization (SIP) method. The chemical structures of the PANI/Fe₃O₄ PNCs are characterized by Fourier transform infrared (FT-IR) spectroscopy. The thermal stability of the PANI/Fe₃O₄ PNCs is performed by thermogravimetric analysis (TGA). Both transmission electron microscopy (TEM) and scanning electron microscopy (SEM) are used to characterize the morphologies of the PANI, Fe₃O₄ nanoparticles (NPs) and the PNCs. X-ray diffraction (XRD) shows a significant effect of the Fe₃O₄ NPs on the crystallization structure of the formed PANI. The dielectrical properties of these PNCs are strongly related to the Fe₃O₄ nanoparticle loadings and unique negative permittivity is observed in all the samples. Temperature dependent resistivity analysis from 50 to 290 K reveals a quasi 3-dimension variable range hopping (VRH) electron conduction mechanism for the nanocomposite samples. The PNCs do not show hysteresis loop with zero coercivity, indicating the superparamagnetic behavior at room temperature. The PNCs with 30 wt% Fe₃O₄ NP loading exhibit a larger positive magnetoresistance (MR = 95%) than 53% of the pure PANI.     

Preparation and characterization of conductive and magnetic PPy/Fe3O4/Ag nanocomposites

In this article, conductive and magnetic nanocomposites composed of polypyrrole (PPy), magnetite (Fe₃O₄) nanoparticles (NPs), silver (Ag) NPs, have been successfully synthesized with a two step process. First, the PPy/Fe₃O₄ was prepared by the ultrasonic in situ polymerization. Next, the PPy/Fe₃O₄/Ag was synthesized through the electrostatic adsorption. The products were characterized by fourier‐transform infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM), Thermogravimetric (TG), conductivity and magnetization analysis, and the results showed that the Ag NPs with the good conductivity coated uniformly on the surface of PPy/Fe₃O₄ and improved the conductivity of PPy/Fe₃O₄/Ag composites. In addition, as compared with PPy/Fe₃O₄, PPy/Fe₃O₄/Ag composites also have the excellent electro‐magnetic property and enhanced thermostability. POLYM. COMPOS., 35:450–455, 2014. © 2013 Society of Plastics Engineers     

Facile preparation of poly(ε-caprolactone)/Fe3O4@graphene oxide superparamagnetic nanocomposites

The main goal in this work was to prepare and characterize a kind of novel superparamagnetic poly(ε-caprolactone)/Fe₃O₄@graphene oxide (PCL/Fe₃O₄@GO) nanocomposites via facile in situ polymerization. Fabrication procedure included two steps: (1) GO nanosheets were decorated with Fe₃O₄ nanoparticles by an inverse co-precipitation method, which resulted in the production of the magnetite/GO hybrid nanoparticles (Fe₃O₄@GO); (2) incorporation of Fe₃O₄@GO into PCL matrix through in situ polymerization afforded the magnetic nanocomposites (PCL/Fe₃O₄@GO). The microstructure, morphology, crystallization properties, thermal stability and magnetization properties of nanocomposites were investigated with various techniques in detail. Results of wide-angle X-ray diffraction showed that the incorporation of the Fe₃O₄@GO nanoparticles did not affect the crystal structure of PCL. Images of field emission scanning electron microscope and transmission electron microscopy showed Fe₃O₄@GO nanoparticles evenly spread over PCL/Fe₃O₄@GO nanocomposites. Differential scanning calorimeter and polar optical microscopy showed that the crystallization temperature increased and the spherulites size decreased by the presence of Fe₃O₄@GO nanoparticles in the nanocomposites due to the heterogeneous nucleation effect. Thermogravimetric analysis indicated that the addition of Fe₃O₄@GO nanoparticles reduced the thermal stability of PCL in the nanocomposites. The superparamagnetic behavior of the PCL/Fe₃O₄@GO nanocomposites was testified by the superconducting quantum interference device magnetometer analysis. The obtained superparamagnetic nanocomposites present potential applications in tissue engineering and targeted drug delivery.     

Structural,thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

In the presented study, the structural, thermal, and mechanical properties of the nanocomposites were investigated by doping silanized hexagonal boron carbide (h-B₄C) nanoparticles in varying proportions (0.5%, 1%, 2%, 3%, 4%, and 5%) into the epoxy resin by weight. For this purpose, the surfaces of h-B₄C nanoparticles were silanized by using 3-(glycidyloxypropyl) trimethoxysilane (GPS) to improve adhesion between h-B₄C nanoparticles and epoxy matrix. Then, the silanized nanoparticles were added to the resin by ultrasonication and mechanical stirring techniques to produce nanocomposites. The bond structure differences of silanized B₄C nanoparticles (s-B₄C) and nanoparticle doped composites were investigated by using Fourier transform infrared spectroscopy. Scanning electron microscopy and energy dispersion X-ray spectroscopy (SEM-EDS) technique was used to examine the distribution of nanoparticles in the modified nanocomposites. Differential scanning calorimetry and thermogravimetric analysis techniques were used to determine the thermal properties of the neat and s-B₄C doped nanocomposites. The tensile test and dynamic mechanical analysis were performed to determine the mechanical properties. When the experimental results were examined, changes in the bonding structure of the s-B₄C nanoparticles doped nanocomposites and significant improvements in the mechanical and thermal properties were observed. The optimum doping ratio was determined as 2% by weight. At this doping ratio, the T_g, tensile strength and storage modulus increased approximately 18%, 35%, and 44% compared to the neat composite, respectively.     

Synthesis and characterization of novel conducting composites of Fe3O4 nanoparticles and sulfonated polyanilines

Surface charged iron oxide (Fe₃O₄) nanoparticles were used for the synthesis of sulfonated polyaniline (SPAN)‐Fe₃O₄ nanocomposites (SPAN/Fe₃O₄‐NCs). 2,5‐diaminobenzenesulfonic acid (DABSA) and 2‐aminobenzenesulfonic acid (ABSA) were independently polymerized with aniline to form SPAN. The structure of the composites was characterized by means of transmission electron microscopy (TEM), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectra, conductivity and magnetic properties. TEM reveals that Fe₃O₄ nanoparticles are “glued” with SPAN in the composite. TGA indicates that SPAN/Fe₃O₄‐NCs are having better thermal stability. The room temperature conductivity of SPAN/Fe₃O₄‐NCs is higher than that of pristine PANI and SPAN. SPAN/Fe₃O₄‐NCs exhibits magnetic behavior. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4127–4134, 2007     

Novel electrically conductive and ferromagnetic composites of poly(aniline‐co‐aminonaphthalenesulfonic acid) with iron oxide nanoparticles: Synthesis and characterization

Nanocomposites of iron oxide (Fe₃O₄) with a sulfonated polyaniline, poly(aniline‐co‐aminonaphthalenesulfonic acid) [SPAN(ANSA)], were synthesized through chemical oxidative copolymerization of aniline and 5‐amino‐2‐naphthalenesulfonic acid/1‐amino‐5‐naphthalenesulfonic acid in the presence of Fe₃O₄ nanoparticles. The nanocomposites [Fe₃O₄/SPAN(ANSA)‐NCs] were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, elemental analysis, UV–visible spectroscopy, thermogravimetric analysis (TGA), superconductor quantum interference device (SQUID), and electrical conductivity measurements. The TEM images reveal that nanocrystalline Fe₃O₄ particles were homogeneously incorporated within the polymer matrix with the sizes in the range of 10–15 nm. XRD pattern reveals that pure Fe₃O₄ particles are having spinel structure, and nanocomposites are more crystalline in comparison to pristine polymers. Differential thermogravimetric (DTG) curves obtained through TGA informs that polymer chains in the composites have better thermal stability than that of the pristine copolymers. FTIR spectra provide information on the structure of the composites. The conductivity of the nanocomposites (～ 0.5 S cm^?1) is higher than that of pristine PANI (～ 10^?3 S cm^?1). The charge transport behavior of the composites is explained through temperature difference of conductivity. The temperature dependence of conductivity fits with the quasi‐1D variable range hopping (quasi‐1D VRH) model. SQUID analysis reveals that the composites show ferromagnetic behavior at room temperature. The maximum saturation magnetization of the composite is 9.7 emu g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synergistic effect between CuCr2O4 nanoparticles and plasticizer on mechanical properties of EP/PU/CuCr2O4 nanocomposites: Experimental approach and molecular dynamics simulation

In this research, copper chromite (CuCr₂O₄) nanoparticles (NPs) were synthesized by the sol–gel auto-combustion method. The effects of CuCr₂O₄ NPs and polyurethane (PU) on the tensile strength of the epoxy (EP) resin were studied by considering different weight percentages (wt%). The response surface methodology (RSM) coupled with central composite design (CCD) (RSM/CCD) methods were also used to optimize the Young's modulus, yield strength, and ultimate tensile strength of the EP/PU/CuCr₂O₄ nanocomposites. The composition structure and morphology of the EP/PU/CuCr₂O₄ nanocomposites were determined using the Fourier Transform Infrared spectroscopy (FT-IR), X-ray diffraction, UV–vis diffuse reflection, Scanning Electron Microscopy, X-ray energy dispersive spectroscopy, and thermogravimetric analysis. It was also shown that the RSM/CCD methods could be utilized effectively to find the optimum process variables in the tensile test of the EP/PU/CuCr₂O₄ nanocomposites. Moreover, the tensile test revealed that the presence of the CuCr₂O₄ NPs in the EP/PU matrix improved the mechanical properties. Best results were obtained with the 0.76 wt% of the CuCr₂O₄ NPs and the 2.6 wt% PU in the epoxy resin. The molecular dynamic simulation was used to illustrate the effect of the NPs on the interaction energy and mechanical properties of this nanocomposite. The calculated interaction energy for the EP/PU/CuCr₂O₄ nanocomposites was −437.96 Kcal/mol. The results showed that Young's modulus had relative agreement with the experimental results.     

Effect of core-shell reversal on the structural,magnetic and adsorptive properties of Fe2O3-GO nanocomposites

Effect of core-shell reversal on the nanocomposites of graphene oxide (GO) and ferric oxide (Fe₂O₃) was studied. Fe₂O₃@GO core-shell nanosheets were synthesized by sonication method, while the GO@Fe₂O₃ core-shell nanospheres by employing N,N′-dicyclohexylcarbodimide as the binding agent for the wrapping of GO sheets on pre-formed Fe₂O₃ nanoparticles (NPs). The phase composition, crystallinity and morphology of the nanocomposites were characterized by FT-IR, TEM, SEM-EDS, VSM, BET surface area study and XRD techniques. The saturation magnetization (M_s) was 1.25 and 0.51 emu g⁻¹ for GO@Fe₂O₃ and Fe₂O₃@GO respectively owing to the dependence of magnetic properties on the reversal of core-shell. BET analysis revealed the surface area of 100.32 m² g⁻¹ and 45.69 m² g⁻¹ for GO@Fe₂O₃ and Fe₂O₃@GO nanocomposites respectively. The fabricated nanocomposites were analyzed as adsorbents for the uptake of Pb (II) ions. The impact of various factors affecting adsorption process such as pH, adsorbent dose, contact time, temperature and metal ion concentration was also investigated. GO@Fe₂O₃ core-shell nanospheres showed a higher adsorption capacity for Pb (II) ions as compared to Fe₂O₃@GO core-shell nanosheet with the maximum adsorption capacities (q_m) of 303.0 and 125.0 mg g⁻¹ respectively. The equilibrium data was estimated by Freundlich, Langmuir, D-R and Temkin isotherm models. Thermodynamic analysis confirmed the spontaneous and exothermic nature of the adsorption process. The adsorption kinetics was significantly fitted to pseudo-second order model. The results confirmed that core-shell reversal can significantly alter the adsorptive properties of Fe₂O₃-GO nanocomposite     

Adhesive and viscoelastic performance of surface functionalized nano‐Fe3O4 induced orientated ethylene vinyl‐acetate composite hot melt adhesives

Different surface functionalized Fe₃O₄ were added to ethylene vinyl‐acetate copolymers (EVA) composite hot melt adhesives (HMAs) to study their influence on the properties of composite HMAs. The adhesion and viscoelastic properties for HMAs were studied using an electromechanical universal testing machine, dynamic mechanical analyzer (DMA) and parallel‐plate rheometer, respectively. Orientation structure of HMAs was studied by Infrared dichroism. The results showed that tetraethoxysilane (TEOS) treated Fe₃O₄ showed better compatibility with EVA composite HMAs, and that TEOS‐treated Fe₃O₄/EVA composite HMAs presented better adhesion property and processing fluidity, compared with bare Fe₃O₄/EVA composite HMAs and silane coupling agent KH560 treated Fe₃O₄/EVA composite HMAs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43931.     

PEGylated copper(II)-chelated polydopamine nanocomposites for photothermal-enhanced chemodynamic therapy against tumor cells

Photothermal-enhanced chemodynamic therapy is a novel and promising strategy for effective tumor treatment. Herein, a kind of polydopamine (PDA)-based nanoplatform is reported for photothermal-enhanced chemodynamic therapy against tumor cells. PDA nanoparticles (NPs) were prepared through the self-polymerization method, which were subsequently chelated with Cu²⁺ and linked with poly(ethylene glycol) (PEG) chains, finally obtaining PDA-Cu(II)-PEG NPs. The fabricated PDA-Cu(II)-PEG NPs were uniform in shape with a narrow polydispersity. They can firstly react with glutathione (GSH) to generate Cu⁺, inducing GSH depletion meanwhile. The formed Cu⁺ could catalyze H₂O₂ to produce hydroxyl radicals (˙OH) via a Fenton-like reaction. The formed PDA-Cu(II)-PEG NPs displayed good photothermal conversion efficiency and photothermal stability. They can be internalized by 4T1 cells effectively. Under near-infrared light irradiation, PDA-Cu(II)-PEG NPs can generate hyperthermia and ˙OH for photothermal/chemodynamic therapy against tumor cells.     

A nano-Fe3O4 material coated with AM/AMPS copolymer for viscosity enhancement at harsh reservoir conditions

A Fe₃O₄ nonaparticles coated with acrylamide/2-acrylamido-2-methyl-1-propanesulfonic acid copolymer(Fe₃O₄-Polymer NPs) was synthesized by emulsion polymerization. The structure of Fe₃O₄-Polymer NPs was then characterized by infrared spectroscopy, thermo-gravimetric analysis, and scanning electron microscopy. Meanwhile, the rheological properties of Fe₃O₄-Polymer NPs solution were systematically studied. The results showed that when dosage of hydrophobic Fe₃O₄-Oleic NPs is 10%, the synthesized Fe₃O₄-Polymer NPs was with the best viscosity enhancement performance, and the maximum saturation magnetization could reach to 20.0 emu/g. The apparent viscosity value of 5000 mg/L magnetic nano-composite solution was 154.6 mPa·s at 30°C. It shows strong viscosity enhancement ability and good temperature performance. Hence, it has great application potential in well stimulation of medium and high temperature oil and gas reservoirs.     

Synthesis and Characterization of New Poly(ether-amide-imide)/Amino-Functionalized Fe3O4 Nanocomposites

New poly(amide-imide)/amino functionalized Fe₃O₄ nanocomposites were successfully fabricated through solution intercalation technique. A poly(amide-imide) derived from an imide-containing diacid and ether linkage diamine was synthesized and characterized. Aiming to have better compatibility, the hydrophilic nature of Fe₃O₄@SiO₂ was changed into organophilic using N-[3-(trimethoxysilyl)propyl]ethylenediamine. The amino-functionalized Fe₃O₄ showed well dispersion in the poly(amide-imide) matrix. Thermal gravimetric analysis results indicated that char yields of the nanocomposites were improved. Microscale combustion calorimetry results showed that poly(amide-imide) had good flame retardancy and amino-functionalized Fe₃O₄ has further improved this property of poly(amide-imide).     

Electro-Magnetic Polyfuran/Fe3O4 Nanocomposite: Synthesis,Characterization, Antioxidant Activity,and Its Application as a Biosensor

Herein, the authors report the synthesis of electro-magnetic polyfuran/Fe₃O₄ nanocomposites using Fe₃O₄ magnetic nanoparticles of different content as nucleation sites via in situ chemical oxidation polymerization method. Surface, structural, morphological, thermal, electrical and magnetic properties of the nanocomposites were studied by FT-IR, UV-visible spectroscopies, XRD, FESEM, TGA, four probe, and VSM, respectively. The effect of Fe₃O₄ nanoparticles content on the electrical conductivity and magnetization of nanocomposites was studied. The obtained polyfuran and polyfuran/Fe₃O₄ nanocomposites were analyzed for their antioxidant activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. In addition, polyfuran/Fe₃O₄ nanocomposites have been investigated for application as electrochemical biosensor.     

Hybrid Au nanoparticles on Fe3O4@polymer as efficient catalyst for reduction of 4-nitrophenol

In this paper, we attempted to synthesize a hybrid nanostructure by the incorporation of Au nanoparticles (NPs) with polymer-coated Fe₃O₄ microspheres. Also, Au NPs on 3-aminopropyl triethylsilane (APTS)-modified Fe₃O₄@SiO₂ and Fe₃O₄@polymer microspheres were synthesized to assess the catalytic activity of Au NPs on Fe₃O₄@polymer microspheres for the reduction of 4-nitrophenol. It was found that Au NPs on Fe₃O₄@polymer catalysts showed higher catalytic activity and recyclability than other APTS-modified catalysts.